EWT releated issue

Hi experts,
Where I see the TDS report and how to get the data for filling of ETDS quarterly.
Please advise me which T.code and how to extract ETDS data.
dont give me link help site this i have already seen.

Hi,
use the transaction code J1INQEFILE, there u can get the data, and upload the file to excel. or go to se 38 give the table J_II_QER_EFILE AND EXECUTE.
If u want to see the all data relating to tds u can see in J1INMIS.
PLEASE ASSIGN POINTS IF ITS USEFUL.
REGRDS
SAI

Similar Messages

EWT - Challan issue

Hi all,
While making challan in J1INCHLN, I am getting following error....
"Number group not maintained for CO code 2000, section 2000 and business
place 194J "
There are proper maintenance in table J_1IEWTNUMGR_1 & J_1IEWTNUMGR_N.
I am getting this problem in selected entries only. I tried reversing the old entry and then passing fresh entry but in vein.
Pls suggest me how to proceed further.
Bhaven Selarka

Hi Bhawan
The number range Group is not assigned in table "J_1IEWTNUMGR_1" .
Go to SM30 and update the data in this table
Only table "J_1IEWTNUMGR_N" gets updates when we assign the number group for each company code and each section code
After updating the data in "J_1IEWTNUMGR_1" i am able to create Remittance challan thru Tcode J1INCHLN
Try this
Thanks
Satish Jain

Transfer releated issue movt type 311q

when i use t-code ypp14n (quality clearnce) report shows material is ready and inspection is ok
when i use t-code yq32c (data of inspection lot). confrim the quanity(transfer the mat. to ware hose with movt type) that data is not updated in ypp14n
e.g
GR-----YPP14N--
YQ32C
(quality inspection) (check inspection lot)
data is not updated into YPP14N when data is upadated in yq32c
same data is appear in ypp14n also

Hi Sanjay,
you are posting material GR blocked for Inspection. this lot will be blocked for inspection and can be seen. then you need to goto the change view of the inspection lot and release the lot for inspection. then only the material can be given user decision and approvals and posted to the unrestricted stocks.
Do check the status and release it will solve ur problem
Pavan K.

Render mode gpu and softkeyboard issues

IHi,
If I'm using the render mode "gpu" or "direct" for my Air Android project, the stage is not resizing correctly if the soft keyboard comes up. (there are 150 px of blank free space over the soft keyboard)
Everything works correctly if I'm using the render mode "cpu".
s this a known issue?
How to fix it?
I'm using Flash CS6 and Air 3.8
Thanks

There are definitely some bugs going on with the softkeyboard on Android. Check out my releated issue: http://forums.adobe.com/thread/1281872?tstart=0
I knew eventually some other people would start running into this problem: Please vote for adobe to take a look into the softkeyboard bugs on Android: https://bugbase.adobe.com/index.cfm?event=bug&id=3627285 ... bugs that don't get enough votes don't get worked on

The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action. Error while connecting to exchange through Outlook 2010

Hi,
I have set up Exchange Server 2013 on Windows Server 2008 R2. Everything is working fine except I am unable to configure Exchange account in Outlook 2010 or any other version. It says
"The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
Error screenshot is attached. Even, I am able to configure exchange active sync on my adroid and ipad which is working perfect. Please let me know if any body have any idea about it. Searched many blog and forum but still now solution till now.
Thanks in advance
Regards,
Manoj

Hi Manoj,
Can you ping your Exchange server? It would hlep us isolate the fault from network releated issue.
Is there a trusted certificate installed on Exchange 2013 server?
If you run the test of RPC over HTTP in
https://www.testexchangeconnectivity.com/, is there any error returned?
For more information, please refer to :
http://technet.microsoft.com/en-us/library/bb123741(v=exchg.150).aspx
http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/1b4dc21c-c745-4699-8eee-423105608dcd/
Thanks.
Fiona Liao
TechNet Community Support

1xm1n's Guide to the Audigy 2 ZS (FAQ)

PART GUIDE. This guide comes in 3 parts. Hello all Creative Audigy 2 ZS ( non Pro ) owners. After owning this card for close on 7 mths now and getting to know the basic ins and outs that need to be set up to get the most out of the card I thought I would write up a basic guide to get new owners started as quickly as possiable. I know when I first got home with it, it was close to hour or so before it was all up and running 00%. Hopefully with this basic guide to getting started, new owners will be up and running 00% in about 0 mins. My guide is not aimed at serious problems? and/or software releated issues as there is just far to many variables. Instead I have compiled the basic needs for installing and setting up the card to get the very best possiable sound reproduction for games/music and DVD video playback. Along with a few common problem solving ti
ps.
For the most part the card is simple enough to setup,install and update drivers and get fantastic DD 5. sound, THX and DTS reproduction. As far as games go, everything should work right off the bat and in most cases going to the developers web site for patches will solve any sound issue you may have. It is impossiable for me to add any fixes for games in this guide but if you have a problem most developers have a dedicated forum for thier games at which help is at hand. I have not included any tips/info on recording media as there are WAY too many things to list, so a seperate guide may follow although the online manual for all creative products is very good. THIS GUIDE IS FOR THE CREATIVE AUDIGY 2zs ( NON PRO ) though should work with all creative products. Table of contents:
1: SETTING UP FOR THE FIRST TIME:
2: INSTALLING THE zs:
3: Updating Drivers and applications ( This is a 2 part guide ):
4: PLXCore.PLX Error:
5: UNINSTALL DRIVERS:
6: UPDATEING DRIVERS : PART 2 : BETAS
7: SLOW BOOTUP AFTER DRIVER INSTALL/UPDATE:
8: SOUND CARD NOT DETECTED OR DRIVER WONT INSTALL:
9: NO SOUND AT ALL:
10: SOUND POPS AND CRACKLES:
11: 5. SOUND IN DVD MOVIES:
12: FILTERS AND CODECS:
13: Some common errors you may encounter with WMP0:
14: Fix a Codec/filter error:
15: MISC Errors you may encounter:
16: Test your overall sound with RightMark:
17: Music playback:?: SETTING UP FOR THE FIRST TIME:Make sure all previous sound devices and drivers are removed. The first thing that needs to be done is general system maintenants. The first thing is to make sure that any previous sound device drivers and application, ( mixers and recorders etc ) you have are removed from your system. This is very simple to do. Go to add remove programmes and find the device driver and the applications and select remove. Now you may think, thats it but there is a little bit more to be done. After the driver is removed there is bound to be a few files left over. So in general simply go through your temp folder? C:\Documents and Settings\"user"\Local Settings\Temp and delete all files. Also go through C:\WINDOWS\Temp and delete files in here. Go through C:/ and locate any folders that contain the apps for your old sound device, these may include mixers and the like. Delete these folders if found.
After this is done it is a good idea to uninstall any and all third party codecs. ( more on codecs later ) These would include Divx, AC3 filter etc. You should know what Codecs you have installed, and as there are many different codecs its not practical for me to go through them all here. Now that we have covered the removal of previous sound devices and its applictions along with all 3rd party codecs its time to get that new ZS up and running.NOTE: If you have onboard sound you MUST dissable it in the bios.
At boot hit the Del key and once in the bios ( read through the manual for your Motherboard ) find the onboard sound device and dissable it.2: Installing the ZS:As a rule you do not want to install any PCi device in the PCI slot directly under the AGP slot as it can and mostly will cause an IRQ conflict. PCI-e has no issue with this though. So on an AGP board I have found the PCI slot 4 is best suited. After the Sound card is sloted in place, double check it is sercure and the mounting screw is in place.Fire up your PC. The first thing to happen is windows will find the device. Let Windows find the device, then you will get a screen asking if you want windows to find drivers or simular. Say no and cancel this. Place the CD that came with your card into the CD dri've and simply follow the prompts to install the drivers and applictaions. It is important not to cancel this and to install ALL the applictions such as media source etc. After all is installed you will need to reboot for all changes to take affect. Once the system reboots you will then given the choice to regeister your Creative product. I would highly recommend you do this now, if not just to get it out the way but you may get an application is not regestered error.
Hopefully you now have your card installed and working. Please do view the getting started demo as it will show you first hand all the settings and options for Media source applictaions. Very handy. CHECK THIS FIRST UP:?In Creative Media Player click on tools and then settings. Click general and under play back sound devices, ensure your card is selected thus to the device features.
Type in run "C:\Program Files\Creative\MediaSource\Audio Device Selection" Doulble click the "CTAudSel" Icon and ensure your device is selected?
3: Updating Drivers and applications ( This is a 2 part guide ):The next thing you WILL want to do before running games or Media is to update your drivers and ap
ps.
Creative have made this process easy with their Auto Updater. Simply go to the surrport page at creative.com and select drivers. You will then need to select the auto update fuction which will need to install acti'veX control ( this one is safe so dont stress ) after this is installed your card will be detected and the next page will be displayed with all relevent di'vers and applictaions. I highly reconmend you install any apps that state Critical or essectial. Other reconmened applications are for specific fuctions so use you own judgement on these. The process wont take to long and is fully automated. Now you may ask, what about the beta driver. To update to the latest beta you need to download it manually and install it from your desktop.Note: The betas are?GREAT so dont be afraid to use them though you must understand that some applictaions may not work correclty, though I have found these issues to be somewhat hit and miss. If an application fails,? simply reboot usally this fixes it.Ok, so thats the easy stuff out the way then and hopefully you dont need to read on, though errors do happen and things go a bit pear shaped from time to time and I myself get the odd issue, though I've found for the most part these things are simple enough to solve hence this guide. 4: PLXCore.PLX Error:?This is a mystery error that can arise for no reason at all, sometimes.
Verify that the file PLXCore.PLX is located in the correct folder in your hard dri've. The default folder is C:\Program Files\Creative\Shared Files folder. If the file is not present in the folder, manually copy the file from the original installation CD-ROM disk to the above location. To do so, insert the Sound Blaster installation CD-ROM disk, exit from the Installation procedure if it auto runs.Go to My Computer, right click on the CD-ROM dri've that contains the installation CD-ROM disk, and select Explorer.Double click on the CTEngine folder, then the PlayRec.cab file, it should expand.Select the file PLXCore.PLX and copy it to C:\Program Files\Creative\Shared Files.Reboot.Any other bootup error that may arise can be fixed using the same method as above, though you will be looking for a different file.
5: UNINSTALL DRIVERSIf you want to un-install all drivers before updateing to beta drivers).
This is my tried and tested technique.BACK UP THIS FILE NOW! ( this may save time later )? PLXCore.PLX? located in C:\Program Files\Creative\Shared Files. Incase you get PLXCore.PLX error.Go to Add Remove Programs and un-install all listings related to your audio card.Also any? apps, eg: media source. Do not restart your computer when prompted so. In? C:\Program Files folder you should have an installshield folder ( may be hidden). In here are GUID named folders. . If hidden, to view these folders Open folder options under tools . Now untick HIDE PROTECTED OPERATING SYSTEM FILES ( RECOMMENED ) it also may be just under hide files also. Try both methods if need be to veiw files.Make sure when you are all done place tick back in box.::YOU WANT TO DELETE THE INSTALLSHIELD files for CRETAIVE::If you go through all the folders and look at each setup.ini you will find ones corresponding to Creative .
You can right click on some and it gives you info or open the ini? with note pad and if there is a reference to Creative labs, media source? and other creative apps? delete the entire folder.
Go through this twice to make 00% sure you get them all.
Empty out all temp folders. Type in run MSCONFIG and make sure all creative entries are untick. There may? be nothing in here.
Type in run regedit and then in search / find / type in? startupreg . This will give you the MS startup entries. Delete the keys for creative if any.
No need to Delete this folder ---- C:\Program Files\Creative ---- its proberly safest to leave it anyway.Run the Beta installer. 6: UPDATEING DRIVERS : PART 2 : BETASYou can use the auto updater from Creative and this is infact the best way to do this. However if you want to update the Beta Drivers ( which are infact better ) its best to just over right them,? with this method things SHOULD go smooth. I have always installed beta drivers this way with no issue as of yet.Download the Beta. Type in run "msconfig" and make sure ALL creative apps are unticked thus not to run at boot.
Type in run "services.msc" and dissable the Creative service.Reboot.Now run the installer for the Beta driver. You will come to a screen that will say or to this effect. An older file was found and may no longer be needed. SAY NO TO REMOVING THIS FILE AND ANY FILES!If after this if you have any kind of media source application error ( which can happen with betas ) then simply re-install the applications. Its best to re-install ALL media source applictaions. 7: SLOW BOOTUP AFTER DRIVER INSTALL/UPDATE:
Search for these in sys32 "ctaud2k.sys" & ha0kx2k.sys. Are they the same version?
All system devices and drivers need to be the same version. In control panel ( windows ) sound and Audio Device Properties, go to Audio and make sure they are all the same device.EG:
Sound playback
Default device: SB Audigy 2ZS Audio [DF00]Sound recording
Default device :SB Audigy 2ZS Audio [DF00]MIDI music playback
Default device : SB Audigy 2ZS Syth A [DF00]Place a tick in Use only default devicesGo to C:\WINDOWS Updreg.exe. Right click on it and go to Pro
ps.
In general go to advance .( this is for regestering your product.)
check its set up as follows.Under Archi've and index attributes are 2 boxs. File is ready for archiving and For fast searching, allow Indexing.
Untick File is ready for Archiving.
Place a Tick in? For For fast searching, allow Indexing.Under Compress or Encrypt untick both.Do the same for this exe. in C\:windows CTRegRun.EXE
Message Edited by xmn on 02-7-2006:40 AM

PART 3.
2: Filters and Codecs.
For the most part you only need AC3 filter , Xvid ( or the full Divx Pack ) WMP0 and which ever other Play back programme you may prefer, Eg, Win DVD, Winamp and so on.
Codec stands for Coder/Decoder. Basically it is a piece of software or a driver that adds a support for certain video/audio format for your operating system. With codec, your system recognizes the format the codec is built for and allows you to play the audio/video file (=decode) or in some cases, to change another audio/video file into that format (=(en)code).
For example, when you install Windows to your home computer, Windows installs automatically most commonly used codecs into the system, so you don't have to download them separately from their vendors. However there are some codecs that are widely used, but not installed by Windows. Most notably DivX , MPEG-2.
Get all the Codecs/Filters/Plugins you could ever need from:
http://www.free-codecs.com/AC3_Filter_download.htm
http://www.free-codecs.com/
http://www.microsoft.com/windows/win...0/default.aspx
Ok, you now should be all set.
A major required Filter is AC3.
AC3Filter - it is DirectShow filter for AC3 decoding to play AVI with AC3 audio tracks and MPEG2 (DVD). Required for WMP.
NOTE: If you have DVD software that should play encoded 5. then make sure you have any updates/patches for the player installed and go through the tools/options for the player and ensure its setup correctly to decode AC3filters in the applictions tools menu.
If you use Cyberlink Power DVD you may need to pay an extra fee to get the required AC3filter/MPEG2 decoders to fuction as all 5. sound settings may be greyed out on some dated versions.
InterVideo WIN DVD ( this software suit comes with most "Asus" if not all makes of Mainboards. This suit comes complete with the required codecs/filters so get full surrport for 5. - 6. - 7. out of the box. Note: you must set it up first under audio options as it defualts to 2..
If you use WMP0 you NEED to download and install the AC3filter or get the latest XP codec/filters packs. With out these filters you may not get 5. sound and/or poor reproduction.
Supported file types:
The following table lists the file types (formats) supported by Windows Media Player .(For files type played by Power DVD or WIN DVD please refer to the makers website or read me file for a detailed list).
File type (format) File name extension .Music CD Playback (CD audio) .cda Audio Interchange File Format (AIFF) .aif, .aifc, and .aiff Windows Media audio and video files .asf, .asx, .wax, .wm, .wma, .wmd, .wmp, .wmv, .wmx, .wpl, and .wvx Windows audio and video files .avi and .wav Windows Media Player skins .wmz Moving Picture Experts Group (MPEG) .mpeg, .mpg, .mv, .mp2, .mpa, .mpe, .mp2v*, and .mpv2 Musical Instrument Digital Interface (MIDI) .mid, .midi, and .rmi AU (UNIX) .au and .snd MP3 .mp3 and .m3u DVD video .vob Macromedia Flash .swf Microsoft Recorded TV Show .dvr-ms* NOTE: WMP defualts to 2.. To enable 5. run WMP0. Click on tools then point to options. Navigate to DVD then open up the advanced window. In here is everything you need to set things up. If you dont see AC3 then you need to install the AC3 codec.
NOTE: If you mess things up simply return to defult settings and start over.
3: Some common errors you may encounter with WMP0:
Error messages are identified by numerical IDs, such as C00D0BC2 and 800704CF. You can determine the ID of a specific error message by clicking the More Information or Web Help button on the error message when you encounter it. The resulting page will indicate the error ID.
: Error's C00D6A and C00D9A while playing DVD's or MPEG-2 content. This is directly related to either your current video card drivers or the MPEG-2/DVD decoder you have installed (EG: PowerDVD, Win DVD etc ). Reinstalling and/or uninstalling the MPEG-2/DVD decoder (PowerDVD, Win DVD ) and/or video drivers should fix the problem for you.You should now be able to re-install you decoder ( Power DVD etc ) and continue its use.
Erro : C00DAC:Cannot play the file Windows Media Player cannot play the protected file because there is a problem with your sound device, such as a sound card or sound controller. You might encounter this error message for one of the following reasons.
Your sound device requires an updated driver. ( update driver )
The selected sound device does not support Secure Audio Path (SAP).
If you have multiple sound devices installed on your computer, try using a different one.
To use a different sound device, on the Tools menu, click Options, and then click the Devices tab. Double-click Speakers, audio device to use, click a different device.
Error : "divide error in module IVIAUDIO.AX at".
Only exists in systems that have various Sound Blaster Li've sound cards and WinDVD installed. This is infact a compatibility problem between these products. The problem is realized when MP3 oriented applications call upon certain sound card services making it look as though the error was raised from within the application in question.
FIX:Uninstall WIN DVD. Reinstall WMP and AC3 filter and then reinstall DVD WIN.
A simple but rare issue.
ModName.Win DVD "msvcrt.dll" and/or Win DVD MFC application error.
FIX:
Uninstall any java filters. Macromedia and Macromedia Acti'veX.( to remove Acti'veX go to C:\WINDOWS\Downloaded Program Files and delete the Acti'veX )
4: Fix a Codec/filter error:
Codecs/Filters/Plugins are like any other kind of software installed and things can go wrong. If things are not working as they should try the following.
Download and install "Gspot"
http://gspot.headbands.com/download.htmlBuild 0307 - 23 KB Run the programme and simply point to system and select "List Codecs and other Filters"
Its easy really to know whats what here and how to use it to find out the source of the issue, if you have one. If its red, its bad so you then need to trace the Filter/Codec to its source and remove it.
Here is just one very simple excample you may encounter and how it was fixed.
If you have ffdshow file is missing error pop up while running a player application, first go to C:\WINDOWS\system32 and search for ffdshow.en. Its proberly not here though. If it is just leave it be.
NOTE: ffdshow is used for AVI/Xvid enc/dec source.
To fix this "ffdshow Video Codec file is missing " error Simply uninstall your Xvid codec or your entire DivX programme, or any other Filter/Codec you have installed for playback of DivX files and AVI Video Files.
(Some times it seems a few Codecs/Filters dont get along so you must be aware of what you install).
Cheak "Gspot" again and Filter should be removed from the list.
Now you can reinstall the Xvid filter "XviD-.0.3-2022004" or your desired DivX programme.
Now go back toC:\WINDOWS\system32 and search for ffdshow.en. It should be there if it was not before. If the issue is back try a different version of required Filter.
So, thats just excample of a simple fix that got everything working again. Its not to hard to find out what the problem Codec/Filter is and then its just a case of uninstalling it. You can re-install the Codec/Filter but you should double cheak with "Gspot" and ensure the issue has not repeated itself .
If it has you can try and find out if the issue is related to another type filter causing a conflict or use an alternate Filter/Codec that will perform the same task .
Search for an updated version of required the Codec/Filter also.
Ok, thats pretty much the basics in getting correct and stable 5. sound working the way it should with your new Creative Audigy 2 ZS sound card.
5 : MISC Errors you may encounter:
ModName.Win DVD 7 msvcrt.dll and/orWin DVD MFC application error.
Uninstall any java filters. Macromedia and Macromedia Acti'veX.
For Explorer issues such as pages not operning, media not working and the like :
type in run:regsvr32 vbscript.dllregsvr32 jscript.dll
Sound stutter:Go to Device ManagerGo to Sound,video and Game ControllersIn there you will see Audio Codecs double click itGo the to the properties TABYou will see Windows Media Audio double click itChange the priority from 7 to Apply OK exit everythingRestart PC
If it fails, set back to .
Any Media file errors you may encounter can be fixed by going to add remove programme list and uninstall the codec/filter. EG, you get an error playing an AVI file. Remove Divx and or other AVI codecs. Re-install just one AVI codec.
6: Test your overall sound with RightMark:
http://audio.rightmark.org/index_new.shtml . This tool is just a simple tool for testing all fuctions of your card. You will soon enough know if your card has an issue in relation to EAX HD and surround sound.
7: Music playback:
Well, not a lot to say here really. Put in your Music CD or select your MP3/WAV file ( NOTE : MP3 will NEVER-EVER sound as good as a retail CD, FACT ) and then go to Mixer. Set up CMSS in EAX the console as you prefer and adjust the 7 band EQ to your liking. Thats all there is to it really. Its more about experimentation over the correct way to set things up.
Ofcause you can use WinAMP for Music playback also
Well, there you have it. The basic grail of the Creative Audigy 2 ZS ( non pro ) setup guide. I do hope it has made your experience with setting things up a breeze and are now enjoying full range 5. in games and DVD movies.

Firefox is already running. "Check access rights" - Read Only, revert back and selected automatically!

I Have follow the steps releated issue "Firefox is already running, but not responding. To open a new window, you must first close the existing Firefox process, or restart your system".
However, issue is solved for sometimes by following steps (1 & 2) but the issue created again. Regarding step 5, I cannot applied it, because when I uncheck "Read Only" it revert back again!!
Please advise.
Note:
We are running the Firefox through Citrix XenApp Presentation 4.5.
Thank you

Do you get that all the time or only if you close Firefox and want to restart Firefox?
See also:
* "Hang at exit": http://kb.mozillazine.org/Firefox_hangs
* "Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs
*http://kb.mozillazine.org/Profile_in_use
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding

MacPro sees 16g mem but Activity Monitor Only Shows 8 Gig

I have 4 simms of 4GB mem in my 2008 MacPro. I always thought all was ok as "About this Mac" shows 16GB of mem. But when I run Activity Monitor, the System Memory pie chart says I have 8GB. Is there another way to confirm how much mem is being recognized by my MacPro?
I only discovered this when running "icleanmemory" from the app store, and noticing I only ever have approximately 3GB free at any one time. Looks like my Mac is not seeing at least 8Gig of mem EVEN THOUGH "About this Mac" clearly shows 16GB.

And not just a reboot, but boot in Safe Mode.
Sometimes a clean install or reinstall over what you have, because a few people (a fraction of a fraction) had a system problem
Some background tasks dont' uninstall, not easily.
They get added to launch services and have to be removed through launchd
Heat is always an issue with RAM
Not showing up all the time with what it should be.... call it defective, call it marginal, have the vendor exchange and let them use more robust testng
FBDIMMs get subjected to heat, and heat-cool cycle stresses electronics
Keeping them below 72*C is important - I use Smcfancontrol 2.x
Riser releated issues
All 4 on one Riser?
Ideal is one set on each Riser
Swap al the Ram to first one andthen the other (the top Riser has to be populated and can't be left empty
Try with one pair, then the other and insure you get 8GB eachtime.
Narrowing it down to a pair, to Riser, to placement.
A common thread, DIMMs show but half capacity. Defective, gone bad.

System Validation task and orc status X

Hi All,
we noticed on some accounts where a resource status is Enabled but the orc status is X. even when we try to force them to C the X always seems to come back somehow. the only thing we can find is that for all of these at one time the System Validation task was manually completed.
of course this causes some problems with code that is dependent on the orc status. is there a way to fix these resources?
Thanx in advance.
Fred

Hi,
AD connector version is 9.1.1.0 and "System Validation" is the first default task for the AD user Resource Object. I am not sure, what will it perform. Once its complets, then process form will be generate by executing all releated adaapters and then will be create AD account for that user. How ever, the same user has been created in other Environment with same detials(So no data releated issue).
FYIP. "Auto Save Form" option for the Process Defination is checked.(I got this as solution from some other thread).
Can you please suggest me, what "System Validation" performs, and why its pending status.Any usefull links please?
Thanks.
Edited by: user13285646 on Jul 8, 2011 8:07 AM

Shared Data Partition + Lion + Snow Leopard - What files go where?

I have partitioned my new internal drive into 3 (which is currently in a enclosure).
The 1st Partition reserved for Lion
The 2nd for reserved Snow Leopard
And the 3rd reserved for a shared Data parition
I'm not enirely sure how to divde up the files. What should be put on the Data parition?
And how to direct each OS parition to access the shared data partition?
I would appreciate advice and example(s). Detailed information is always welcome.
Thank you.

darkhorse85 wrote:
It would excellent if you would could me about other programs such as Mail which would suffer releated issues.
I really don't know, and don't know if there's a list anywhere of Mac apps. Mail seems to change with every release (and even some "point" updates). I think Calendar is one, too.
This list of 3rd-party apps is unofficial, but seems pretty reliable as far as what will run where: http://roaringapps.com/apps:table
As you'll see, it's mostly geared towards Lion vs. Mountain Lion (and in a few months, will be Mountain Lion and Mavericks).
You'll probably have to use some trial-and-error, and/or contact the makers of the apps you use.
I am not familiar with using any kind of software as a Virtual Machine how would this work?
I'm not very familiar with it, but you install 3rd-party software that lets you run one OS within a different one, rather than having to boot into one or the other. Basically, it puts a Virtual Machine folder containing one whole OS installation on the disk of another; it runs concurrently with the other OS, in a separate window (or multiple windows for different apps, I think). There are some downsides, especially performance, but a lot of folks do it, usually to run Windows, but some to run Snow Leopard on Lion or Mountain Lion. There may be some restrictions on the Snow Leopard license, too -- Apple didn't allow that for OSX at all for a long time, except for the Server product. I don't know what the rules are now.
Parallels and VMware are two I see mentioned often. I seem to recall reading about a free one, but as it's pretty complex software, I'm a bit skeptical.
I don't know where else to point you, but that should get you started on research. Look for those apps and/or Virtualization Software to find more.
Good luck!

Report on EWT - Report on tds deducted till issue of tds certificate

We have implemented ewt recently. we want to have report which will give the tds deducted on advance, invoice , tds challan updation, tds payment, tds certificate issued etc.
Do we have any T code which will give the tds details vendor wise for the above said requirement.
Prashant P. Zinge

Hello,
Do J1INMIS t.code, You would get available details pertaining to TDS.
J1INMIS.
Regards,
Jaymin R. Bhatt

Issue with execution of report

Hi,
I have an issue when the report is running. It is taking long time to run.
The scenario is that We used Plant in selection screen initially and there were no issues in execution of the report.
As per the business process, the plant has to be replaced with another info object zobject_0plant. Zobject is a customized infoobject and 0plant is the navigational attribute of zobject.
The report is running good without the selection of Zobject_0plant.
When this zobject_0plant is selected in variable screen, the report is taking long time to execute.
Please help me to resolve this issue.
Thanks in advance.

Hi... as per your issue
First note: Check the master data tds rates were maintained or not . and the new rates were updated in all the vendor master data or not
In EWT a field called business place is playing major roll. Please check that all the transactions should have business place. if some transactions do not have business place than it will not consider for challan posting.
1. Post invoice with TDS (importantly update the business place and section code)
2. Run J1INCHLN for monthly remittance to Govt.
3. Update J1INBANK for back challan updatation
Note : checked the table with_item and the bseg,bkpf tables.basically the j1incert picks/parses data from the with_item table(the program fetches all the data from bkpf and checks with with_item table and does some filtering and its shown in the certificate print)
4. Run J1INCERT to print the TDS Certificates
Note: Finally just look into your J1INCERT entering parameters screen, the problem lies in the paramaters most probably in dates only assuming all the required configuration has been correctly done
Also Please change the assigned form J_1IEWT_CERT to J_1IEWT_CERT_N
I hope it will helps you...please confirm
Regards
vamsi

E issue

/discussions/board/message?board.id=smartphones&message.id=167927&query.id=972576#M167927Samer issues for me but i think i must go to nokia care cuz the v2.0 didn't helped me.

Hi,
Find the below link releate to Brazil - NFe, which may help you.
http://help.sap.com/saphelp_46c/helpdata/en/43/0bd40843de11d1896f0000e8322d00/frameset.htm
t/r
Gopinath

Installation issue: Installing Patch p6810189 on 10.2.0.1 on RHEL5

Running into issue when trying to install patch p6810189 on a new installation of 10.2.0.1 ( Database + Companion ). Tried with different JRE versions, the same error is generated.
Exception java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame occurred..
java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame
Environment variables:
=============
ORACLE_BASE=/u01/app/oracle/
ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1
LD_LIBRARY_PATH=/u01/app/oracle/product/10.2.0/db_1/lib:/usr/lib:/usr/local/lib
DISPLAY=10.33.92.221:0.0
Linux Release:
========
$ uname -r
2.6.18-164.el5
$ cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.4 (Tikanga)
Preinstallation Checks are met:
===================
$ ./rpm_check_2.ksh
binutils-2.17.50.0.6-12.el5 (x86_64)
compat-db-4.2.52-5.1 (x86_64)
compat-db-4.2.52-5.1 (i386)
compat-libstdc++-296-2.96-138 (i386)
compat-libstdc++-33-3.2.3-61 (x86_64)
compat-libstdc++-33-3.2.3-61 (i386)
control-center-2.16.0-16.el5 (i386)
control-center-2.16.0-16.el5 (x86_64)
gcc-4.1.2-46.el5 (x86_64)
gcc-c++-4.1.2-46.el5 (x86_64)
glibc-2.5-42 (x86_64)
glibc-2.5-42 (i686)
glibc-common-2.5-42 (x86_64)
glibc-devel-2.5-42 (x86_64)
glibc-devel-2.5-42 (i386)
glibc-headers-2.5-42 (x86_64)
ksh-20080202-14.el5 (x86_64)
libaio-0.3.106-3.2 (x86_64)
libaio-0.3.106-3.2 (i386)
libgcc-4.1.2-46.el5 (i386)
libgcc-4.1.2-46.el5 (x86_64)
libgnome-2.16.0-6.el5 (x86_64)
libgnome-2.16.0-6.el5 (i386)
libgnomeui-2.16.0-5.el5 (x86_64)
libgnomeui-2.16.0-5.el5 (i386)
libgomp-4.4.0-6.el5 (x86_64)
libgomp-4.4.0-6.el5 (i386)
libstdc++-4.1.2-46.el5 (x86_64)
libstdc++-4.1.2-46.el5 (i386)
libstdc++-devel-4.1.2-46.el5 (i386)
libstdc++-devel-4.1.2-46.el5 (x86_64)
libXp-1.0.0-8.1.el5 (x86_64)
libXp-1.0.0-8.1.el5 (i386)
make-3.81-3.el5 (x86_64)
sysstat-7.0.2-3.el5 (x86_64)
Error when running ./runInstaller
====================
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, SuSE-10, redhat-4, redhat-5, UnitedLinux-1.0, asianux-1, asianux-2 or asianux-3
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-02_10-57-59AM. Please wait ...oracle@nydblnxp01:/u01/downloads/p6810189/Disk1 [DNYJRSK1:/u01/app/oracle/product/10.2.0/db_1]
$ Oracle Universal Installer, Version 10.2.0.4.0 Production
Copyright (C) 1999, 2008, Oracle. All rights reserved.
Exception java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame occurred..
java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:194)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:203)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:463)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:959)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:194)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:203)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:1017)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
Tried Alternatives with different JREs:
=======================
./runInstaller -jreLoc /usr/local/java/jdk1.6.0_07/jre
$ ./runInstaller -jreLoc /usr/local/java/jdk1.6.0_07/jre
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, SuSE-10, redhat-4, redhat-5, UnitedLinux-1.0, asianux-1, asianux-2 or asianux-3
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-02_11-00-59AM. Please wait ...oracle@nydblnxp01:/u01/downloads/p6810189/Disk1 [DNYJRSK1:/u01/app/oracle/product/10.2.0/db_1]
$ Oracle Universal Installer, Version 10.2.0.4.0 Production
Copyright (C) 1999, 2008, Oracle. All rights reserved.
Exception java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame occurred..
java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:194)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:203)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:463)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:959)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
Caused by: java.lang.ClassNotFoundException: oracle.ewt.lwAWT.BufferedFrame
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
... 17 more
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$000(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:194)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:203)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:1017)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
Caused by: java.lang.ClassNotFoundException: oracle.ewt.lwAWT.BufferedFrame
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
... 17 more
./runInstaller -jreLoc /usr/local/java/jdk1.5.0_12/jre
./runInstaller -jreLoc /usr/local/java/jdk1.5.0_15/jre
./runInstaller -jreLoc /usr/local/java/jdk1.6.0_01/jre
So for no luck on metalink/otn/google ... Any suggestions?

It still gives error, this time error is changed, another exception. I tried with oracle provided rpm for RHEL 5, which install all dependent packages required, same issue persists.
$ ./runInstaller -silent -responseFile response/patchset.rsp
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, SuSE-10, redhat-4, redhat-5, UnitedLinux-1.0, asianux-1, asianux-2 or asianux-3
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-11-03_11-29-46AM. Please wait ...oracle@xxxxxxxxxx:/u01/downloads/p6810189/Disk1 [DNYJRSK1:/u01/app/oracle/product/10.2.0/db_1]
$ Oracle Universal Installer, Version 10.2.0.4.0 Production
Copyright (C) 1999, 2008, Oracle. All rights reserved.
Exception java.lang.NoClassDefFoundError: oracle/sysman/oip/oipc/oipcp/OipcpPrereqProgress occurred..
java.lang.NoClassDefFoundError: oracle/sysman/oip/oipc/oipcp/OipcpPrereqProgress
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:196)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:203)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:463)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:959)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/oip/oipc/oipcp/OipcpPrereqProgress
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:196)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:203)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:1017)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:899)

SQL Developer MSSQL 2012 to Oracle 11GR2 issues

I have an instance of SQL that I want to migrate over to Oracle 11G R2 as a POC. I was playing with the SQL Developer tool and was able to connect to both of my instances. However during the "Migrate to Oracle" function I am getting an error. With the SQL Dev 3.2.2 I was using jdk1.6.0_45 and jtds-1.2.jar. So I decided to install SQL Developer 4 to see if there's any other issues. With SQL Dev 4, I was using jdk1.7.0_25 and jtds-1.3.1.jar, which also errored out. Now the question is... how do I migrate? On the Step 4 of 10, "Source Database", when I choose the SQL instance and click next I get the following error:
java.lang.NullPointerException
at oracle.dbtools.migration.capture.CaptureCmd.getListOfOnlineSourceDatabases(CaptureCmd.java:1250)
at oracle.dbtools.migration.capture.MSSqlServerDatabaseListProvider.getAvailableOnlineDatabaseList(MSSqlServerDatabaseListProvider.java:61)
at oracle.dbtools.migration.capture.DatabaseProviderRegistry.getAvailableDBListOnline(DatabaseProviderRegistry.java:41)
at oracle.dbtools.migration.workbench.core.ui.quickmigrate.QMWizard$ContextHelper.getAvailableDBListOnline(QMWizard.java:369)
at oracle.dbtools.migration.workbench.core.ui.quickmigrate.CapturePageMigration.initPageState(CapturePageMigration.java:307)
at oracle.dbtools.migration.workbench.core.ui.quickmigrate.CapturePageMigration.onEntry(CapturePageMigration.java:78)
at oracle.ide.wizard.FSMWizard.gotoPanel(FSMWizard.java:765)
at oracle.ide.wizard.FSMWizard.setSelectedPage(FSMWizard.java:481)
at oracle.bali.ewt.wizard.BaseWizard.selectPage(BaseWizard.java:1966)
at oracle.ide.wizard.FSMWizard.selectPage(FSMWizard.java:465)
at oracle.ide.wizard.FSMWizard.doNext(FSMWizard.java:340)
at oracle.bali.ewt.wizard.BaseWizard$Action$1.run(BaseWizard.java:4033)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:251)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:733)
at java.awt.EventQueue.access$200(EventQueue.java:103)
at java.awt.EventQueue$3.run(EventQueue.java:694)
at java.awt.EventQueue$3.run(EventQueue.java:692)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:703)
at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:154)
at java.awt.WaitDispatchSupport$2.run(WaitDispatchSupport.java:182)
at java.awt.WaitDispatchSupport$4.run(WaitDispatchSupport.java:221)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.WaitDispatchSupport.enter(WaitDispatchSupport.java:219)
at java.awt.Dialog.show(Dialog.java:1082)
at java.awt.Component.show(Component.java:1651)
at java.awt.Component.setVisible(Component.java:1603)
at java.awt.Window.setVisible(Window.java:1014)
at java.awt.Dialog.setVisible(Dialog.java:1005)
at oracle.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:382)
at oracle.bali.ewt.wizard.WizardDialog.runDialog(WizardDialog.java:298)
at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:51)
at oracle.dbtools.migration.workbench.core.ui.quickmigrate.QMWizard.launch(QMWizard.java:1444)
at oracle.dbtools.migration.workbench.core.QMLauncher.launch(QMLauncher.java:40)
at oracle.dbtools.raptor.controls.sqldialog.ObjectActionController.handleEvent(ObjectActionController.java:196)
at oracle.ide.controller.IdeAction$ControllerDelegatingController.handleEvent(IdeAction.java:1482)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:663)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:1153)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:618)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2018)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2341)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:402)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:259)
at javax.swing.AbstractButton.doClick(AbstractButton.java:376)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:833)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:877)
at java.awt.Component.processMouseEvent(Component.java:6505)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3321)
at java.awt.Component.processEvent(Component.java:6270)
at java.awt.Container.processEvent(Container.java:2229)
at java.awt.Component.dispatchEventImpl(Component.java:4861)
at java.awt.Container.dispatchEventImpl(Container.java:2287)
at java.awt.Component.dispatchEvent(Component.java:4687)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4832)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4492)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4422)
at java.awt.Container.dispatchEventImpl(Container.java:2273)
at java.awt.Window.dispatchEventImpl(Window.java:2719)
at java.awt.Component.dispatchEvent(Component.java:4687)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:735)
at java.awt.EventQueue.access$200(EventQueue.java:103)
at java.awt.EventQueue$3.run(EventQueue.java:694)
at java.awt.EventQueue$3.run(EventQueue.java:692)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:87)
at java.awt.EventQueue$4.run(EventQueue.java:708)
at java.awt.EventQueue$4.run(EventQueue.java:706)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:705)
at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)

Harri,
Have a look at SQLines tools at http://www.sqlines.com/sql-server-to-oracle
Dmitry

EWT releated issue

Similar Messages

Maybe you are looking for