EWZ5 unlock users after client copy does not work

Hi All
I have following problem, i made client copy and i locked user in EWZ5 on both systems (source and target). Than I made client copy with profile SAP_CUSV (customizing with variants). The problem is that after the copy i am unable to unlock users on the targat client in EWZ5. I see users locked in the transaction but when i click unlock than no one is unlocked (result like there are no locked users) and users still remains locked (i tried to log on). On source system unlocking was working ok.
Any suggestion are highly appreciated.
JM

Hi Josef,
Did you checked syslogs? You can also execute the sql statement, below, on sqlplus;
update <owner>.usr02 set uflag='0' where bname='EWZ5';
commit work;
Best regards,
Orkun

Similar Messages

  • Short key for copy does not work all the time now.

    After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time.  It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac.  Please help.

    I've plugged in my default mac keyboard and the short key copy still does not work.

  • HT1267 IPhone4..Model MC603C/Ser#850441XGXA4S: I have update to 5.1.1. I am not alerted to my emails unless I tap on the mail app. Then the alert/banner appears. When I start up, the alert sounds but after that it does not work. Whats wrong?

    Ever since I updating my IPhone 4 to 5.1.1. my alert/banner does not work with my mail app. Initial startup it works but after that, it does
    not work. The only way I know there is a message by tapping on the mail app and then I hear the alert and the banner shows up. Prior
    to updating, it always worked. Is there a 'bug' in the system or is there something I am missing here.

    Yeah this was my first time connecting my phone to the computer since I went to iOS 5.0 and iCloud, so I wasn't familiar with the fact that it did not automatically create a backup on iTunes during the Sync process.  Should have right-clicked on the phone device and did a manual backup.
    But still, after restoring the backup from iCloud, I don't understand why data from certain apps got hosed (anything before October 2011, which was my last iTunes backup), while other apps' data appears to be fully intact.

  • Adobe After Effects CS3 does not work on my new iMac

    Hello everyone,
    I recently bought myself a new iMac and Adobe After Effects CS3, and guess what, the stuff does not work. I've tried almost everything, been on a lot of forums but can't seem to find any solution. One thing that keeps coming back is that it has to do with the Geforce 8800 GT in my iMac, some kind of compatibility problem between both.
    The problem is this, whenever I start AE CS3, a window pops up, stating "Out of Memory ( 23 :: 40 )".
    And then something about licensing, but I guess I can skip that window, since that clearly has nothing to do with the problem.
    Are there some beta drivers or something for my videocard that I can download somewhere to maybe get rid of this problem?
    Thanks in advance,
    Maxim

    Maybe an answer at http://www.adobeforums.com/webx/.59b665be/1

  • Unlocked iPhone from T-Mobile does not work in Switzerland

    I'm extremely annoyed. I bought myself a *so called unlocked* iPhone in Germany for 999 Euro and now it does not work with a Swiss SIM card. When I try to make calls via dialing or when i try to read text messages (sms) the phone and the sms application will crash. Calling the different helplines ends up in the same resutls: Apple care blames either Swisscom or T-Mobile, T-Mobile blames either Swisscom or Apple and Swisscom blames Apple or T-Mobile...
    In the end however, I can't get rid of the feeling that the problem could be solved by a very simple software update, because I've seen hacker reports on the internet claiming they were able to solve the problem by changing a few settings. I don't want to be forced to hack my legally bought so called unlocked iPhone. *When will Apple set the "unlocked" iPhone really free?*

    Hi Pete,
    welcome to the club! A you can see from this thread
    http://discussions.apple.com/thread.jspa?threadID=1260589&tstart=0
    you are not the only one. It seems as if the T-Mobile unlocked phones work with any German SIM card, but with non from not-Apple supported countries (like CH).
    Apple support is aware of the problem, as many of us have called them and submitted bug reports, but it remains to be seen, if Apple is interested enough in "us" to provide a solution.

  • Create a page as a copy does not work properly

    Hi,
    When I create a new page as a copy of an existing page with page authorization set to some authorization scheme, the newly created page does not work. When I edit the page definition, "Authorization Scheme" is set to some random number instead of the scheme that was set in the original page and running the page throws an error. Any buttons or items set with an authorization also throws an error. Is this a bug?
    Thanks,
    Machaan

    Hi Patrick,
    I am using APEX version 4.0.1.00.03 on Oracle 11g.
    I tried to reproduce it on apex.oracle.com and was not able to reproduce it. The new page worked fine.
    In my application, the newly created page works fine and is not generating an error, but the authorization scheme is set to a number instead of a defined authorization scheme.
    Thanks,
    Machaan
    Edited by: Machaan on Nov 12, 2010 2:07 PM

  • After reset, Whatsapp does not work ...

    helll,
    I did Reset of my nokia N8 using the code.  it wiped the phone clean.
    i installed Whatsapp, went through the config, but does not work.  it looks like it is about to work, then just goes back to the main screen.
    when i check open apps, it does not show.
    suggestions?
    Nokia 3395
    Nokia 6600
    Nokia N95 8GB
    Nokia N8 (Anna)
    Nokia Lumia 930
    Solved!
    Go to Solution.

    I uninstalled it , reinstalled same issue. I uninstalled and installed from the WhatsApp site, it works....
    I don't care why, it works.
    Nokia 3395
    Nokia 6600
    Nokia N95 8GB
    Nokia N8 (Anna)
    Nokia Lumia 930

  • User Interface - auto detect does not work

    I have added the jQuery Mobile User Interface with Theme 50 to an old APEX 4.1 Application.
    When adding the new User Interface i checked the "auto detect" feature in the old User Interface.
    "Auto detect"- Help says:
    Select whether the appropriate user interface should be automatically detected. If auto-detection is enabled, the user will be redirected to the corresponding login page or home page.
    When calling the Application (only with the application-id) from my nexus 4 smartphone the application does not switch to the mobile Login page.
    Do i have to change any old settings or themes?
    Thanks so far

    You can run Incremental Sync from user profile 3-4 times. This will delete the user profile from SharePoint UPA.
    Now, we need to run UPA clean job timer job available in Job Definition inside central administration.
    This is a by design issue which you have raised. But, to get it done on the same day you need to follow above mentioned steps. This would be done in some hour and cannot be achieved in 4-5 minutes. So, your original request is a by design issue and can be
    done i some hours.
    Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

  • Digital Copy Does not work

    i have bought triple play blu ray with digital copy and when i try to redeem it does not recognise the code

    The person at that number did not work for 20th Century Fox or have any idea what I was talking about.
    I called the number on the case. They did not really understand the problem (suggested I update the firmware on my Blu-Ray player). They referred me to http://support.foxdigitalcopy.com. You can obtain a new serial number there, just not for this particular movie.
    They have a different number, 866/520-6606, but only answer it Mon-Fri 8am - 5pm.
    At this point, I'm just going to try to take the path of least resistance and return it to Amazon as defective.

  • After Effects CS6 does not work on Mac OS 10.9.1 Maverick

    I made the mistake of updating my OS not realizing that After Effects wasn't going work.  Short of backing up to disk my data and reinstalling an older OS, what do I do now?  I'm in the middle of a project and this is casusing me problems.  HALP :-/

    Install the most recent update:
    http://adobe.ly/AE_CS6_1104

  • After 10.5.4 update, mac osx system proxy client (HTTPS) does not work!!!

    after 10.5.4 update (some minutes ago) i can't go on https web pages with browser safari and the other applications that uses the system proxy client (for example google notifier). i'm connecting to internet trough my macbook pro cable lan adapter into a LAN with a proxy server (before the update the mac osx system proxy client does work right).
    Help me!!!

    Hello Robert:
    I am sorry to be simplistic, but Apple cannot possibly be responsible for Safari (or any other software product) working in every possible environment. In my business life I used several methods to seamlessly link with my corporate servers from home or on the road. In each case, it was possible, but not without the help of my excellent IT people.
    Barry

  • PC Suite 7.1.40.1 Content Copier does not work.

    The Content Copier in PC Suite 7.1.40.1 fails to Backup the Data from the Phone. "The phone did not contain any content ..."
    All Attempts to uninstall, delete Directories and Registry Keys did not help.
    The Content Copier from 7.1.30.9 works fine.
    OS: Windows XP Pro SP3

    I'm also having problems with V7.1.40.1 of this software, running on WinXP Home edition V2002 SP3.
    (via Bluetooth Toshiba stack) from a 6600 Slide.
    Trying to backup Contacts list (the MOST important data!!!) it just sits there forever with the 'busy' wheel twiddling round and zero % progress on the display bar.  It DOES say it might take a while but more than 30 minutes with nothing indicated for only a couple of hundred contacts suggests actually no progress at all!  It IS possible to read contact, calendar, messages etc., using other apps in the suite - but then the progress bar on the PC Suite display tends to stop, showing (eg.) 90%, although it looks like all the content has been transferred.  Using other apps, of course you can't create an alternative backup file!!!
    When the contacts list fails to transfer, the phone screen momentarily flashes up a 'sync complete' message after only a few seconds - although I THOUGHT I was backing-up, not sync'ing!
    PC Suite looks like a very nice software package - but does ANYONE (except US!!!) actually test it with real data and real phones???
    Message Edited by veryirritated on 15-Dec-2009 05:41 PM
    Message Edited by veryirritated on 15-Dec-2009 05:41 PM

  • Jpeg "save as copy" does not work

    in CS3, after i'm done adjusting an image with layer and mask, etc, and I go to save it as a jpeg, it automatically attaches "-copy" to the name. I try to do this in CS5 and it doesn't work even though "save as a copy" is checked by default. I have to manually change the file name otherwise it will ask if i want to overwrite the original jpeg and that gets annoying when working with lots of files.  Is this a bug? or is there an easy fix?
    thanks much

    Edit - I just tried this with CS5 and I do get " copy" added to the end of my file name for all but JPEG.
    I'll bet this has something to do with the new feature where you can Save As a JPEG (as a copy) even if you're editing a 16 bit document.
    -Noel

  • File copy does not work with exe files

    I used BufferedReader and BufferedWriter to make copy of an exe file in local drive. Nothing was strange in this code. But I wonder the newly created exe file is denied "..exe is not a valid win32 application" by Windows. I could see the bytes are copied. Is that something like header of exe file is damaged etc ??

    Readers and Writers are for text. For binary data use InputStream and OutputStream.

  • Adobe X - Chinese font missing. After install still does not work

    In adobe X when opening some pdf documents, adobe is asking for a chinese font. I have downloaded the font from the link in the message, but afterwards the same error message still appear - also after restart of the whole PC. Running windows XP
    Is there somehow that I can check if this has been installed correctly or somewhere there are further logs ?

    Hi rossoneris,
    Please check the 'Fonts' folder if you have installed Chinese fonts or not.
    What error do you get when you try to open the pdf's?

Maybe you are looking for

  • How do i sync my ipod with a new laptop without losing all my music on my ipod

    Hi- I just got a new MacBook. My itunes library was on another laptop that crashed. I want to sync my ipod to my itunes on my macbook without it wiping out my ipod.  Can someone help me out? Thanks!

  • Orf raw files

    I found a few hints here and I've done everything suggested and still not able to read .orf files. I am using Windows 7 64 bit and Photoshop CS3. (I am holding out for CS6) I downloaded the latest ACR and no go. I downloaded v 4.3.1  (as suggested in

  • MacBook Pro (Late 2008) won't start up

    Since December 2012, my MacBook Pro (late 2008) refuses start up. After trying many, many things (from online forums - nothing worked), the solution I found by hit and miss is to heat up the back of the laptop in front of my fireplace (or with a hair

  • 1.4....trapping keyevents in JWindow.. V E R Y T O U G H...

    Hello JDevelopers.... This is very tough for me.. Could u pls write some lines of code for me.. P L E A S E... !!! I have a JWindow... and I want to display "keypressed" on console when user press a key on that jwindow.. It seems very simple but ...

  • Not executing crontab

    Hi I have following entries in my crontab It is not running the monitoring script as mention in crontab 0 1 * * * /app/oracle/scripts/oracheck.ksh 0 4 * * * /app/oracle/scripts/oracheck.ksh 0 7 * * * /app/oracle/scripts/oracheck.ksh 0 10 * * * /app/o