Ex Factory Date

Dear All,
We want to maintain a date when the material is lifted at Vendor's place against each schedule in the PO.
There is one field by name "EX-FACTORY DATE" but if I enter the same it is disappearing from the PO. Basically it's not getting saved.
Is there anything missing here. Also I'm not able to find what is the table field for the same.
Regards
Manish

Hi
There is no field to maintain the pickup date in purchase order. you should go for enhancement.
another way to maintain the same by using long text.
Just go with the following links
http://scn.sap.com/thread/3291830
Monitor EXW ex works date of vendor
Hope it will help you.
Abhishek

Similar Messages

I have a replacement Note 3. My Vodafone SIM, which worked fine in the original, fails in the replacement. When I try to access Settings, the menu briefly flashes, then the phone reverts to the home page. Will a Factory Data Reset fix this?

Hi,
I have a Note 3 and a Vodafone SIM that are not playing well together.
The history is:
I got my Note 3 over 2 years ago. We visited Italy 2 years ago and I bought a Vodafone sim at a Vodafone outlet. Everything worked perfectly during that trip and a subsequent trip to France.
Last October, I had to replace the Note 3 because the camera was failing. I had insurance, so the insurance company sent me a refurbished Note 3. When I tried to use the SIM last December, the Note 3 had problems. When I put the SIM in and started the Note 3, the phone recognized the sim (but gave me an error that, according to Verizon, is spurious). I could make phone calls but I could not access the data network. In order to access the data network, you have to go into Settings. More Settings, Mobile Networks and set the Access Point Name.
With the replacement Note 3, I cannot access Settings. As soon as I try to access Settings (with the Vodafone SIM installed), the Settings menu appears and then immediately the home screen comes up. After working with Verizon for over an hour, I was able to get into Settings and set the access point name by booting into Safe mode. But as soon as I rebooted into 'normal' mode, Settings failed and I could not access its menu (to turn on wifi, for example). There are a couple of other apps that did the same thing - but I cannot remember which ones.
I have talked to Vodafone - they have no clue. I talked to a Samsung rep I ran into at Best Buy, he thought the Vodafone SIM might be corrupted. And now a Verizon tech I talked to last week thinks it is a firmware problem on the phone and I should do a Factory Data Reset.
Have you ever heard of this problem? What do you think might be causing it?
Thanks for your help.

On2CO, I'm glad you have reached out to us today. Thank you so much for the very detail description on what is going on with the device. Sounds like there might be an issue with an application that might be causing these issues. The reason I say that is, when the phone is in Safe Mode you are able to access the Settings screens with no issues. While in Safe Mode that does block all 3rd party applications from running on the phone. I would suggest on trying to back up the device and perform a factory reset: http://spr.ly/6-182Vuo (you would want to make sure to uncheck Automatic Restore in step 3). Once the reset is complete try to see if you can get into Settings. Then, I would recommend on adding 3rd party applications back on to the device one by one to see if we can find what app might be causing this issue. Please keep us posted if you have any further questions or concerns. KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Send Ex factory date from R3 to APO and populate in PO in APO as start date

Hi ,
Need your expertise in one scenario. SAP IS retail is combined with SAP APO.
1) Purchase Order is ciffed to APO.
2) Based on delivery date in PO in R3....APO calcualated date for distribution demand at source location by taking lead time from tlanes
2) Requirement is to extract 'Ex factory date' from table EXPD in R3 and then send this date to APO.
3) This new date should replace the starting date of PO in APO...in keyfigure Distribution demand at source location.
Could you please suggest the way to do it? Will appreciate your response.
Thank you in advance.

Hi Aparna,
Thanks.
I have also started with purchase order user exit (CIFPUR01 Exit Function Module- Exit_SAPLMEAP_001) at CIF outbound in R3 which will capture the date from table in R3..WIll be sent to APO...APO inbound user exit( APOCF006 ( Functional Module EXIT_/SAPAPO?SAPLCIF_PU_001) will overwrite the date at soucre location in key figure Dist Demadn TLB Confirmed or by chaing date at order level.
Hi Experts,
I think there are two more points....
1) If dates are changed in table ( EXPD) then change pointer will not trigger CIFFIng thsoe changes to APO as the field is not CIF relevant. So it wont be real time integration. Work around can be to set up CIF batch job for PO at regular interval. But I am wondering if we can get some way to make it real time integrationj through CIF. Will appreciate reply on this.
2) Have one more concern and I think its bit crucial to know the answer at this stage ....if date change in key figure Distribution Demand TLB Confirmed figure happens in such a way that lead time between date at soucre and at target doesnot match with available Means of Tranport(MOT) lead times in TLanes then what will happen? WIll it rescheudle the dates as per date at target loctaion to match with lead time in Tlanes or will it not touch it? WIll appreciate reply of experts on this and also on how to achieve this in APO
Thank you.
Best Regards
Nils

After factory data reset, Google calender won't sync

Have completed TWO factory data resets on HTC Thunderbolt. Once w/deleting SD Card and once without. Still cannot get the calendar to sync past 30 days! I asked Big Red about it and they told me an "in house" HTC programmer would call me. That never happened and this was two weeks ago. . Can anyone suggest how to get my calendar back?

Hi, Tweebolt!
I'm sorry you did not receive that call back! I want to see your calendar working properly for you! When you go into Settings>Accounts & Sync>Gmail/Google> are you seeing Calendar sync greyed out or checked? If greyed out I've got some tricks I want you to give a try. What I suggest is going into Settings>Account, then creating a new Gmail account (this is nothing you have to keep, we're only going to use it for five minutes). Once created, go into the Accounts & Sync, select the new account and ensure Calendar is set to sync. Then go into your Calendar application, tap Menu>Settings>ensure your real Gmail account exists and add a new event. Next, you'll go back to Account & Sync, and you should have the option to check Calendar sync under the real Gmail account. Check it to initiate the sync. After all is said and done and the sync is complete, go under Accounts & Sync and remove that fake account you set up. I've been this jump start a Gmail account countless times, and its a lot of steps but takes 5-10 minutes to complete. Keep me posted!
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

Re-installing Adobe PS Touch after a factory data reset

I previously purchase PS Touch for my Acer A500 Iconia tablet. After doing a factory data reset I went to the Play Store to download it again and they want to charge me another $9.99. I shouldn't have to pay for it twice. What do I need to do?

Hi,
If you are sure that you are using the same Google account you should contact Google.
You can always log in at Google Play with that account to see if it's still there and if it's still compatible with your device (minimum requirements is Android 3.1).
Check the purchase mail receipt if you are unsure about which account was used.
Thanks,
Ignacio

What exactly happens when I do a Factory data reset?

I want to revert my Xperia Active to the state where in it was how I bought it. All my added apps removed, all the default apps are reinstalled, the SD clear from any extra settings that other apps may have left behind while uninstalling. All in all I want to "reformat" it. Will Factory data reset do this?

Question 1:
Will the default apps on the Active (aka the SportyPalPro and friends) be reinstalled? I know that I can always redownload them from the market, but as i said, just like how it was bought. The Factory data reset displays a checkbox that says it would wipe out even the SD card. So what about that?
Question 2:
I followed this tutorial (http://androidforums.com/3529664-post5.html) to free up some load off my internal space. Does this have any gravity on the Factory resetting? In essence, I remapped Android to make it install the apps to SD by default.

How to reset phone to its original settings (not the Factory data reset) without erasing user data??

I DONT want to go for the Factory Data Reset option, because it deletes all the installed apps which i managed with great difficulty. Instead I tried for Settings reset, but could not find the PIN for it. I tried 0000 also 1111 but doesnt work at all. Please someone help. !!!!!!!!!!!!!!!

Update Service (SUS)http://www.sonymobile.com/gb/tools/update-service/http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exePC Companion (PCC)Bridge (for Mac)Alternatives on How to backup Xperiashttp://talk.sonymobile.com/thread/36355Don't forget to mark the Correct Answers & Helpful Answers

Factory date calculations

Hi,
I want to do some caculations based on the factory calander. Its like :
date = 04/27/2005.
I want to substract 4 days from this. But in case the new date is a leave day (Saturday/ sunday) then it should return the last working day along with the weekday like monday.
So here its saurday, so it should return 04/22/2005 friday, instead of 04/23/2005 saturday.
Is there a way to do this calculation. Please advise.
Thanks,

Hi,
Try this out
*&      Form ADD_WORKING_DAYS
      Add n number of factory days(working days) to date
     <-- P_DAYS     Number of days to add
     <-- P_PAYDATE Starting date
FORM add_working_days USING p_days
                      CHANGING p_paydate TYPE sy-datum.
DATA: gd_factorydat LIKE scal-facdate,
        gd_resdate    LIKE sy-datum.
Convert date to factory date
CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
       EXPORTING
            date                = p_paydate "Starting date
            factory_calendar_id = 'GB'
       IMPORTING
            factorydate         = gd_factorydat. "Factory calender date
Add n number of days to factory date, ignors non working days
gd_factorydat = gd_factorydat + p_days.
Convert factory date back to actual date
CALL FUNCTION 'FACTORYDATE_CONVERT_TO_DATE'
       EXPORTING
            factorydate         = gd_factorydat
            factory_calendar_id = 'GB'
       IMPORTING
            date                = gd_resdate. "Actual date
p_paydate = gd_resdate.
ENDFORM.                    " ADD_WORKING_DAYS
<b>OR</b>
*&      Form ADD_WORKING_DAYS_RESNONWORK
      Add n number of factory days(working days) to date, but allow
      resultant date to be a non working day
     <-- P_DAYS     Number of days to add
     <-- P_PAYDATE Starting date
FORM add_working_days_resnonwork USING p_days
                       CHANGING p_paydate TYPE sy-datum.
DATA: ld_count TYPE i.
ld_count = p_days.
WHILE ld_count GT 0.
    CALL FUNCTION 'DATE_CHECK_WORKINGDAY'
      EXPORTING
        date                       = p_paydate
        factory_calendar_id        = 'GB'
        message_type               = 'I'
      EXCEPTIONS
        date_after_range           = 1
        date_before_range          = 2
        date_invalid               = 3
        date_no_workingday         = 4
        factory_calendar_not_found = 5
        message_type_invalid       = 6
        OTHERS                     = 7.
    IF sy-subrc NE 4.
      p_paydate = p_paydate + 1.
      ld_count = ld_count - 1.
    ELSE.
      p_paydate = p_paydate + 1.
    ENDIF.
ENDWHILE.
ENDFORM.                    " ADD_WORKING_DAYS_RESNONWORK
Thanks & Regards,
Judith.

Droid SD & Phone Storage - Factory Data Reset?

Will doing a "Factory data reset" erase my contacts and/or photos from my phone?

None of us know. It has been going on for weeks. People are waking up to no contacts at all on their phone. But if I make changes and sync, I get a notice the sync was successful and nothing has changed.
I have contacts where no matter what I do to get their BD correct, it is always changed back to another date. Tried on the phone and sync. Tried online and save, it immediately reverts to another date. I have even attempted to delete the contact and re-add her and her daughter, birthday still changes. Frustrating the heck out of me.
So just be aware you may not get the contacts back automatically or correctly.

Calculating Factory Date.

Hi All,
I need to calculate 5th factory date from today i.e excluding weekends and factory holidays based on factory ID
Ex: Today date is 01.04.2005, I need to get the 5th work day from today i.e 8.04.2005. And if suppose there is an holiday on 8.04.2005 based on facotry calendar id then it should return 11.04.2005.
Is this possible with any FM? Your feedback/help would be reawarded,
Cheers,
Nameeth

THe code for you.
data: lv_date type sy-datum value '20050401'.
do 5 times.
lv_date = lv_date + 1.
CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
EXPORTING
*   CORRECT_OPTION                     = '+'
    date                               = lv_date
    factory_calendar_id                = 'GB'
IMPORTING
   DATE                               = lv_date
*   FACTORYDATE                        =
*   WORKINGDAY_INDICATOR               =
* EXCEPTIONS
*   CALENDAR_BUFFER_NOT_LOADABLE       = 1
*   CORRECT_OPTION_INVALID             = 2
*   DATE_AFTER_RANGE                   = 3
*   DATE_BEFORE_RANGE                  = 4
*   DATE_INVALID                       = 5
*   FACTORY_CALENDAR_NOT_FOUND         = 6
*   OTHERS                             = 7
IF sy-subrc <> 0.
ENDIF.
enddo.
write: lv_date.
Regards,
Subramanian V.

Re: Droid SD & Phone Storage - Factory Data Reset?

How do you stop your phone from sending a single text message multiple times until you have to turn off your phone!?!!!! This should not happen. And a week ago I had to go down to the local Verizon store to fix duplicate contacts from going to even up to 9 or 10 copies of one name. After spending my valuable time (2 Hrs.+) there, I had to leave and it still wasn't resolved. I told a manager of the store my frustration and he just walked away from me. I'm canceling my account. And the fees to break my account agreement should be waived for all the time and problems I have had with Verizon! You did not live up to promises of a great company and great phone...I lived up to paying my payments. And why did my real name show up when I messaged this?!!!!! (As if I care anymore).

Good afternoon magmae8!
I would certainly be disappointed to see you leave us unhappy, especially for what should be an easy fix. I do apologize for the length of time you had to spend in the store. Verizon Wireless does value your time and always work with a sense of urgency. Please send me (AdamE_VZW) a direct message so I can better assist and provide a solution.
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

Calculation of no. of working days (per Factory Cal) between 2 date chars

This question could be considered to be in continuation of a previous post called "Working days of month with factory calendar"
I have two date Characteristics: say Date1 and Date2. I need to find the number of working days between them based on the factory calendar.
(And yes we have already defined the default factory calendar in IMG under 'General Reporting settings' ).
The previous post proposed the following:
1) Convert date1 into factorydate (standard functionmodule)
2) Convert date2 into factorydate (standard functionmodule)
Perform date1 - date2 to get number of working days.
I agree that there is a std function module to convert cal date to factory date called: 'DATE_CONVERT_TO_FACTORYDATE'
But what are the steps for calling the conversion? Should I create a new Formula variable of 'Customer Exit type' give it a name and define the Function module in CMOD? But then how do I attach the formula variable to the date characteristic. Note that my infoobjects are Chars so I cannot do date1- date2 in the query as is possible with keyfigures!
Please help! (my version is BW 3.0)
Thanks
Naresh

Hi,
For the above scenario when you need to calculate date 1 - date 2. we can't build a new formulae or calculated KF directly because those are the chars.
So we need make chars to act as KF through Formulae with replacement path.
create a formulae variable on those 2 Date chars with Processing type as replaccement then those 2 Dates can be avilable to build a formulae as ur requirement.
Let me know if you need any more information.
Thanks,
Raju

BEx variables: Date is outside Factory Calendar Image

Good day
A user received the following message when selecting the inpiut help for a date variable for a CRM query:
" Date is outside Factory Calendar Image"
I have checked tcode SCAL and noticed that the factory calendar for South Africa = 1996 to 2010. I checked the CRM source and their factory calendar is the same. In the mean time I have transferred the global settings for SAP DNI (parts) into BW and the factory calendar setting for South Africa now shows 1996 to 2015.
Problem is that the CRM query still shows the same error message.
Question:
1) Should factory calendar settings for all SAP sources (Modules i.e. CRM...) be imported into BW, or is there another setting that I must check?
Thanks in advance.
Cj

This is what I have done:
Whe have the following R/3 modules (source systems in BW)
SAP DNI
SAP dFM
SAP CRM
SAP SRM
etc.
(Tcode = SCAL, selected 'factory calendar', selected 'rebuild tables')
Firstly I have transferred the global settings for SAP CRM (as the BEX query is from CRM). Their factory date was 2012. This did not solve the problem.
secondly, I did SAP DNI, their factory date = 2015, this also did not solve the problem.
I then transferred the global settings for SAP dFM, our main reporting module, their factory date = 2020. The problem was solved.
Seems as if only ONE of the modules depicts the factory calendar date for BEX.
I have rested this again and only SAP dFM global settings rectified the BEx display problem.
Hope this helps?

Factory start date in factory calendar

Hi,
what to fill in "Factory Date Start" field while creating new factory calendar?
Thanks!

HI,
This depends on the go live date and past data upload. The past date up to which you want to create records and want to upload history in PS and other modules uo to that that date your factory calendar should exists.
Regards,
Kapil Kaushal

Pass working day to get factory calendar date

Hello Experts,
I wish to get the factory calendar date, specific to a factory calendar, based on a working day.
Basically, if i pass say 4, then i want to get the date for the 4th working day based on a specific factory calendar.
Can someone throw some light on possible function module that i can use?
Thanks

I want to pass sy-datum to get factory date and then check if this factory date is the 4th busiess day for that month based on a specific calendar.
Or if i can pass in 4th bus day for a month (just pass 4) based on a specific factory calendar (just pass calendar id), then i would want the factory date, which i want to compare against sy-datum in my subsequent logic.
I am trying to trigger a data load stating if factory date for this month = 4th business day, then run load, else dont. And this in BW.
I dont have the FM that you mentioned above, in BW and is available only in R/3

Ex Factory Date

Similar Messages

Maybe you are looking for