Ex2010 -Probem with sending internal and external e-mail

Hi
In night we have a problem with time sync on VMWare Host so our Exchange Environment stopped working. Edge server (Ex 2010 SP3 full update) stopped transfer e-mails to mailbox server (Ex 2010 SP3 full update). After time synchronization e-mails were
treansfered to mailbox server. Users was able to send e-mail inside and outside but after 20-40 minutes users cannot send e-mails - between themselves and outside.
I don't see any e-mails in mailbox queues or using get-messagetrackinlog. I sent e-mail to our test e-mail mailbox on gmail and outlook.com. They wrere not be delivered by mailbox server. I can't find it using get-messagetrackinglog or in mailbox qeue.
What was happen? How to solve this problem?

Hi,
Please disable 3rd party AVs for a little while as Ed mentioned.
Also check whether there is any related error message in App Log.
Thanks
Mavis Huang
TechNet Community Support

Similar Messages

Cisco ISE with both internal and External RADIUS Server

Hi
I have ISE 1.2 , I configured it as management monitor and PSN and it work fine
I would like to know if I can integrate an external radius server and work with both internal and External RADIUS Server simultanously
So some computer (groupe_A in active directory ) will continu to made radius authentication on the ISE internal radius and other computer (groupe_B in active directory) will made radius authentication on an external radius server
I will like to know if it is possible to configure it and how I can do it ?
Thanks in advance for your help
Regards
Blaise

Cisco ISE can function both as a RADIUS server and as a RADIUS proxy server. When it acts as a proxy server, Cisco ISE receives authentication and accounting requests from the network access server (NAS) and forwards them to the external RADIUS server. Cisco ISE accepts the results of the requests and returns them to the NAS.
Cisco ISE can simultaneously act as a proxy server to multiple external RADIUS servers. You can use the external RADIUS servers that you configure here in RADIUS server sequences. The External RADIUS Server page lists all the external RADIUS servers that you have defined in Cisco ISE. You can use the filter option to search for specific RADIUS servers based on the name or description, or both. In both simple and rule-based authentication policies, you can use the RADIUS server sequences to proxy the requests to a RADIUS server.
The RADIUS server sequence strips the domain name from the RADIUS-Username attribute for RADIUS authentications. This domain stripping is not applicable for EAP authentications, which use the EAP-Identity attribute. The RADIUS proxy server obtains the username from the RADIUS-Username attribute and strips it from the character that you specify when you configure the RADIUS server sequence. For EAP authentications, the RADIUS proxy server obtains the username from the EAP-Identity attribute. EAP authentications that use the RADIUS server sequence will succeed only if the EAP-Identity and RADIUS-Username values are the same.

SiteMinder integration with the internal and external facing portals

Hi ,
We are in development phase for SiteMinder integration with the internal and external facing portals.The proposed dual authentication scheme which requires both SiteMinder for External facing portal (EFP) and LDAP for Internal portal .is it possible?
and is it possible to main to diff LDAP directories one is external users and one is for internal users.?
If you maintain 2 diff(external & internal) LDAP Directories in Siteminder Policy Server what about external users which are not exit in portal data source .
I appreciate if anyone can help me for my above query .
Regards
Tag

Hey Tag,
We do have a physical external Portal and a physical internal portal. The both the external and internal are connected to 2 LDAP directories.
For example the External Portal is connected to the Employee LDAP Direcotry and the Customer LDAP Directory. The Internal Portal is connected to the US Employee LDAP Direcotry and the EMEA LDAP Directory.
So each one of them is connected to 2 different LDAP Directories.
I believe that the Siteminder Policy is setup such that the Internal portal has a policy and the External portal has a seperate policy on the same Siteminder Server. Then each of the Policies is configured to connect to the approiate LDAP Directories.
You have to maintain the LDAP Directory information in both the portal and Siteminder Policy Server. It is required in the policy server so that it can authenticate the user and it is required in the Portal server so that it can authorize the user and display content based on thier assigned roles.
Hope that helps.
Regards,
Keith

ILife with both internal and external hard drives?

I've been considering switching from a homebrew, multi-boot desktop to a MacBook for my primary computer, in part so I can hang out with my family in the living room rather than be exiled to the home office when I want to compute.
But here's my concern: I have media. We have about 50 GB of iTunes; maybe 30 GB of iPhoto; and tons and tons of digital video that would be stored in iMovie. Obviously the libraries are all interlinked. And it's all growing. I also like to rip DVDs and re-encode them for my iPod and AppleTV. Right now, my desktop has 480 GB of internal storage and that's just about enough.
I have discovered that the MacBook only comes with an option up to 250 GB. I absolutely need AppleCare, so I can't get an aftermarket hard drive. (All my Macs break - this one from the office that I'm on right now has a bum DVD drive, and my wife's has needed both fan and logic board replacements.)
While I'm aware of the existence of external hard drives, I'm concerned about Apple's non-external-hard-drive-friendly way of storing iLife data. If I wanted to keep more recent or useful music and photos on the internal drive but older stuff on an external, and still be able to use iLife seamlessly, would that be possible? (I see myself editing recent video in the living room, but then hooking back into the external HD in the office if I need older stuff.)
What solutions are out there for integrating data stores on both internal and external hard drives into an iLifestyle?
Thanks!

Sascha Segan1 wrote:
.. What solutions are out there for integrating data stores on both internal and external hard drives into an iLifestyle?
all iApps (iPhoto, iTunes, iM08) support usage of external drives as 'mass storage' devices.. you can tell all apps which drive to use for the Libraries.. there some tools out there, which even allow the usage of 2/many different Libraries in iTunes/iPhoto..
for iM in detail: the Projects are small files, and should stay internal (allthough I'm discribing a 'hack' on my site: http://karsten.schluter.googlepages.com/im08tricks Project Library (and Events) on External Harddrive); the Events (=GBs) could be located on as much ext. HDDs as you want..
but ...
all iApps are single-user .. you can NOT 'share' Libraries to 2/many different users; the idea of a 'media server' which hosts/shares all kind of data to all kind of users is not 'on concept' of iLife ..

Lync Implementation with different internal and external domain sync

Hello Experts,
Having Windows 2012r2 with Lync 2013 frontend and Edge 2012 server on Win2012. Internal domain name is test.local and Internet domain name is : tgroup.com. Internally all the clients are able to sync with frontend
server using [email protected] or [email protected] Internal CA and External Digicert works fine. But only problem is with external clients who want to communicate through edge server.
Edge server has 3 LAN ip address (nat with public IP), 10.10.10.2, 10.10.10.3, 10.10.10.4 and another Internal network interface which has ip 10.10.20.3
which uses that to communicate with front-end.
How to achieve this ? We dont have reverse proxy configured and we have only two servers.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

The reverse proxy is used to publish URL's like the meet and dialin url, the address book url and the lync mobile client (smart phones and tablets) urls. This doesn't impact the external desktop user access as thats via the edge server. There is more to
it than that but for the sake of keeping this simple lets stick to that for now.
As far as SIP domains go. Think of your Lync users as having a SIP address similar to email addresses. You wouldn't have a user with an internal email address but with a different external email address. In fact best practice is to have the Lync SIP address
match the email address.
My reccomendation is to use the ttgoup.com as a sip domain and not the test.local
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Lync Sorted blog

Internal and external switches on server 2012 r2

this is driving me nuts.
I have a vm with an internal and external switch.
I am trying to get backups to route to the host machine using the internal switch only.
I've gone all over priorities and the routes are all fine but the data will constantly go over the external switch.
If i disable external switch traffic goes over internal switch just fine.
I've read about the automatic detection of least cost routing on the internal switch but just can not get it to run correctly.
please help
Doug

All settings below.
backup traffic should run from 192.168.200.4 > 192.168.200.2 over internal NIC
VM Settings
Ethernet adapter Ethernet 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter #3
Physical Address. . . . . . . . . : 00-15-5D-37-0E-04
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.200.4(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.240
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
Physical Address. . . . . . . . . : 00-15-5D-37-0E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.100.4(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DNS Servers . . . . . . . . . . . : 192.168.100.3
NetBIOS over Tcpip. . . . . . . . : Enabled
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.100.1 192.168.100.4 261
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.100.0 255.255.255.0 On-link 192.168.100.4 261
192.168.100.4 255.255.255.255 On-link 192.168.100.4 261
192.168.100.255 255.255.255.255 On-link 192.168.100.4 261
192.168.200.0 255.255.255.240 On-link 192.168.200.4 276
192.168.200.4 255.255.255.255 On-link 192.168.200.4 276
192.168.200.15 255.255.255.255 On-link 192.168.200.4 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.100.4 261
224.0.0.0 240.0.0.0 On-link 192.168.200.4 276
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.100.4 261
255.255.255.255 255.255.255.255 On-link 192.168.200.4 276
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 192.168.100.1 Default
===========================================================================
HOST Settings
Ethernet adapter vEthernet (Internal-NIC):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
Physical Address. . . . . . . . . : 00-15-5D-37-0E-02
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::744b:bbc1:e067:5592%48(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.200.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.240
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 805311837
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-15-79-97-A0-D3-C1-05-24-BF
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet Host:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP Ethernet 1Gb 4-port 331FLR Adapter #4
Physical Address. . . . . . . . . : A0-D3-C1-05-24-BF
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::3412:1255:61dc:3e3c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.100.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DHCPv6 IAID . . . . . . . . . . . : 211866561
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-15-79-97-A0-D3-C1-05-24-BF
DNS Servers . . . . . . . . . . . : 8.8.8.8
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet Host:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP Ethernet 1Gb 4-port 331FLR Adapter #4
Physical Address. . . . . . . . . : A0-D3-C1-05-24-BF
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::3412:1255:61dc:3e3c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.100.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DHCPv6 IAID . . . . . . . . . . . : 211866561
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-15-79-97-A0-D3-C1-05-24-BF
DNS Servers . . . . . . . . . . . : 8.8.8.8
NetBIOS over Tcpip. . . . . . . . : Enabled
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.100.1 192.168.100.2 276
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 169.254.45.46 276
169.254.45.46 255.255.255.255 On-link 169.254.45.46 276
169.254.255.255 255.255.255.255 On-link 169.254.45.46 276
192.168.100.0 255.255.255.0 On-link 192.168.100.2 276
192.168.100.2 255.255.255.255 On-link 192.168.100.2 276
192.168.100.255 255.255.255.255 On-link 192.168.100.2 276
192.168.200.0 255.255.255.240 On-link 192.168.200.2 261
192.168.200.2 255.255.255.255 On-link 192.168.200.2 261
192.168.200.15 255.255.255.255 On-link 192.168.200.2 261
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 169.254.45.46 276
224.0.0.0 240.0.0.0 On-link 192.168.100.2 276
224.0.0.0 240.0.0.0 On-link 192.168.200.2 261
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 169.254.45.46 276
255.255.255.255 255.255.255.255 On-link 192.168.100.2 276
255.255.255.255 255.255.255.255 On-link 192.168.200.2 261
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 192.168.100.1 Default
Doug Hardy

Delivery report shows status of Pending for external address. Email sent to both internal and external addresses.

We have an Exchange 2013 on-premise server and seem to have an issue with emails sent to internal and external users at the same time.
The issue came to light because someone sent an email to 44 recipients, of which one was internal. None of the external recipients received the email. I checked the delivery report in the EAC and found the internal email marked as 'Delivered' and all of
the external ones marked as 'Pending'. I checked the queues and there were none. I did some testing and sent an email to just one of the external addresses on the list, it arrived. I tried sending the email again to all of the recipients, the external ones
all showed 'Pending'. I tried it again, but this time excluded the internal email address and all of the 43 external emails were immediately delivered.
So it seems that the issue only arises when we are sending to both internal and external addresses.
I then tried a test email to one internal address and one external address. The Delivery report says that the internal address was delivered immediately, while the external address is 'Pending' and gives more information saying: 'Message delivery is taking
longer than expected. There may be system delays. For more information, contact your helpdesk.'. To add further mystery to this, the email was actually delivered.
So, I have two concerns:
First is seems that some emails sent both internally and externally are only arriving internally. This is a huge problem because I don't know how many have been affected. There may be many lost emails we don't know about.
Second, it looks like I can't trust the delivery report. It says pending for some emails which didn't arrive, but it also says pending for some which did arrive. That is no good at all.
For info the server is running Windows Server 2012. I have run a Microsoft Update to check if there are any to apply and the only Exchange one is a spam filter update, which I doubt has any bearing but I will apply when I get chance.

Hi Neil,
According to the description, I find a related KB on Exchange 2010:
https://support.microsoft.com/kb/2694474?wa=wsignin1.0
It has the similar situation as yours.
This issue occurs because a function in a message tracking component tries to obtain the information for the recipient instead of the external recipient.
Please try to upgrade to the latest Exchange update to check whether this issue can be solved.
Also please check whether Throttling has been set.
Please run "Get-TransportService | fl" to check the MaxOutboundConnections parameter value.
More details to see:
Message throttling
http://technet.microsoft.com/en-us/library/bb232205(v=exchg.150).aspx
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Internal and external ranges...?

Hi All,
I have one question about internal and external ranges. When im sending some products data from source (200) Client to Target (202) Client. I have to find out its using internal or external updates.
Pls give me sample code how to check that.
Akshitha.

Hi,
I dont think a sample code can solve your problem. You can take help of your functional consultant while working with Number Ranges.
Internal Number Ranges and External Number Ranges are used to generate sequetial numbers, which we can create in the SNRO transaction.
Internal Number Ranges are Auto matically generates the numbers in the given ranges for the Object where as we can give certain number with the ranges given is the External Number Ranges. So External number Ranges are Obiviously useful for Data Transfer between two systems or Clients.
Because the Masterdata should reflect same in both the system, with that only integrity stands there .,
We can find this with debugging the corresponding program.
Thanks,
Naveen.I

Internal and external mail setting

I have 20 WinXP users connecting to my Xserve.
I want to set up Mail so that only 3 Users can access mail both internally and externally from the office, the others I want to allow internal mail to each other but not to send/receive externally. Is this possible? If so how do I configure this behaviour?
Regards
Tony

Can anyone assist with my previous posting?
Can the functionality I want be achieved via the server or do I have to look foe alternative methods?
Can anyone point me in the directon of info that will let me solve this issue?
Regards
Tony

Can I split my itunes music library between and internal and external hard drive?

Is it possible to have music on the two different drives and still be able to make playlists from both drives to put on my ipod? Here's my situation: I'm using a Dell 32 bit computer running Vista Home Premium SP2 which I share with other users. I have a large itunes library (40g+ of music only) that's starting to hog the hard disk space from other users. If possible, I would like to split off part of my itunes library to an external hard drive while still having access to the entire library for my ipod. Ideally I would like to have all my downloaded songs on both the internal and external drives so I'll have backups in case a drive fails, while putting all the music I have hard copies of solely on the external drive. Any help on how this can be done would be appreciated.

If you manually manage your itues library, you can store parts of it on an external drive, or on an internal drive. Just keep in mind that in iTunes that you must set a default location for iTunes to manage it's files, and that will be the default location for iTunes to store anything it downloads. You would need to manuay manage moving things from there if tht is not where you want them stored.
Perhaps a "better" solution would be for you to invest a little mone into 2 external drives. One to hold your entire iTunes library, and the second to be your off-line backup of the first. This is the method I have gone with and I like how it works for me. My entire iTunes library is on an external (portable) 320GB drive. Then, when iTunes is not running, I will clone my external drive onto a second drive I happen to have, this way if I have any failure of my primary drive, I lose at most about a weeks worth of content. For me, I purchase little content during a week, but I do move a fairly large volume of podcasts. With the entire library being on the external drive, if I ever have to swap to using my backup drive iTunes wil just think that it hasn't run and downloaded anything for a week, and all the "lost" content will be re-downloaded automatically. This won't work for apps or purchased content, but for subscribed podcasts, it is great.

Setup internal and external DNS namespaces best practice

Is external name space (e.g. companydomain.com) and internal name space (e.g. corp.companydomain.com or companydomain.local) able to run on the same DNS server (using Microsoft Windows DNS servers)?
MS said it is highly recommended to use a subdomain to handle internal name space - say corp.companydomain.com if the external namespace is companydomain.com. How shall this be setup? Shall I create my ADDS domain as corp.companydomain.com directly
or companydomain.com then create a subdomain corp?
Thanks in advanced.
William Lee
Honf Kong

Is external name space (e.g. companydomain.com) and internal name space (e.g. corp.companydomain.com or companydomain.local)
able to run on the same DNS server (using Microsoft Windows DNS servers)?
Yes, it is technically feasible. You can have both of them running on the same DNS server(s). Just only your public DNS zone can be published for external resolution.
MS said it is highly recommended to use a subdomain to handle internal name space - say corp.companydomain.com
if the external namespace is companydomain.com. How shall this be setup? Shall I create my ADDS domain as corp.companydomain.com directly or companydomain.com then create a subdomain corp?
What is recommended is to avoid having a split-DNS setup (You internal and external DNS names are the same). This is because it introduces extra complexity and confusion when managing it.
My own recommendation is to use .local for internal zone and .com for external one.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Unable to activate internal and external urls at the same time

Hi,
We have Configured EBS R12 in DMZ setup as described in Figure F-9 of metalink note 380490.1 ,Option 2.4: Using Reverse Proxy with no External Web Tier.
refering to 726953.1 Case History: Implementing a Reverse Proxy Alone in the DMZ Configuration - R12.
but Not able to activate internal and external urls at the same time in this configuration. Only the node where last autoconfig was run getting activated as web node.
When trying to accees the url of the other node it gets redirected to the url (where autoconfig is last run).and for this error observed is Error Code:502 Proxy Error.The specified Secure Sockets Layer (SSL) port is not allowed.(12204).
For both external and internal services are UP.opmn status is live no error.
Using Apache as reverse proxy.
EXTERNAL Reverse proxy settings:
s_login_page http://LONWEB01.process.com:81/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">NO</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">NO</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">NO</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
INTERNAL Middle Tier settings:
s_login_page http://stprojapp01.test.com:8005/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
Are we missing anything....
Thanks & Regards

Hi,
Finally it's resolved...Following is the solution thought to share in the forum:
The configuration of the E-Business Suite environment for DMZ requires profile options hierarchy type to be set
to SERVRESP.
To change the profile options hierarchy type values to SERVRESP, execute the following SQL script as
shown below:
sqlplus / @/patch/115/sql/txkChangeProfH.sql SERVRESP
After successfully completing the above sql script, run Autoconfig in all nodes to complete the profile options configuration.
It's resolved after doing this..

Internal and External different set of menu for ESS

Hi
We have 2 portal server - Internal and External. The Portal are being used not.
We are planning to implement ESS now in Portal. We are planning to provide two different set of options when the same user access internally and externally.
For example, User XYZ access internally he will get menus ABCDE but the same user access from external he only gets manu AB.
If anyone has implemented with similar concepts or know how to do it technically, kindly advice.
Thanks
Yuva

Let us assume we have 3 internal groups :
internalGroup_1 -> Role A, Role B
internalGroup_2 -> Role C, Role D,
internalGroup_3 -> Role E,
and 2 external group :
externalGroup_1 -> Role A,
externalGroup_2 -> Role B,
We add similar user under a group. and then roles are assigned to groups. in above example Role A , Role B is assigned to internalGroup_1.
We can have a single user id in which is attached to interalGroup_1, interalGroup_2, interalGroup_3 , externalGroup_1and interalGroup_2.
When user logon to Internal portal he will see role A, B,C,D and E
and when user logon to internal poral he will see role A,B.
provided A,B,C,D,E roles should exist in internal protal and role A,B exist in External portal. You can use transport roles from external portal to internal portal.

All my hard drives (internal and external) have a small lock in the lower left corner of the icon and I don't have permissions to access. Permissions are set to 'Custom' in the get info window and I can't change them.

All my hard drives (internal and external) have a small lock in the lower left corner of the icon and I don't have permissions to access. I have 3 user accounts set up and I cannot access any of them. Permissions are set to 'Custom' in the get info window and I can't change them. Originally I had Snow Leopard installed on one hard drive and 10.5.8 installed on another. I started to have some problems accessing data between them and so I tried changing the permissions on ONE hard drive partition. The next thing I know, all my drives are locked (except the ones with the systems on them), the small lock appeared in the lower left corner of the drive icons and I don't have permissions to access any of them. In the get info window, permissions are set to 'Custom' and I can't change them.

There is suddenly a lock icon on my external backup drive!
Custom Permissions

Internal and External Reconciliations

I am looking to find out what the differences are with Internal and External Reconciliations.
I am not sure if I need to use Internal or External when doing Manual Reconciliations in banking.
Thanks!
Dayna

I am trying to figure out how to use the bank reconciliation process. I keep seeing reference to an "expert sesion" and a link to it. However I get an Access Denied message when I try the link.
Help. ? If this "expert session" is on the Partner Portal, how are we lowly Customer to get it?
"External reconciliation is used for bank reconciliation , however when you go in detail , you have to use internal reconciliation for Business partner and Vendor .
https://websmp206.sap-ag.de/~sapidb/011000358700000050892007E
Review this expert session ,bank statement processing in CA...

Ex2010 -Probem with sending internal and external e-mail

Similar Messages

Maybe you are looking for