Exact Order of manual Installation (thinkpad R51 Type 1830)

Hello Community, I am wondering if anyone could help me with fix my problem.I have an IBM Thinkpad R51 laptop (TYPE 1830) and have been trying to get it working since last few days. I lost all the driver softwares and have downloaded a number of them from IBM website but for some reason i cannot get the LAN, Wifi, Audio/Video working. I have installed XP Home edition and am puzzling what is it i need to do and in which order i need to do it? Also which drivers are specific to my machine?Would appreciate your guidance and help.... Kind Regards,Faraz.

OK, based on that info, I see the following at pcidatabase.com:
Device Id Chip Description                   Vendor Id Vendor Name
0x1077 Gigabit Ethernet Controller (Mobile) 0x8086     Intel Corporation
0x4220 Intel 54 MBit/s Notebook WLAN Card    0x8086     Intel Corporation
Wired and wireless, respectively.
From this, please try installing the following two packages from your support site:
Intel PRO/1000 LAN adapter software
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-r-series-laptops/thinkpad-r51/downloads/DS004058
Intel Wireless LAN (11abgn, abg, bg) for Windows XP, 2000 - ThinkPad
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-r-series-laptops/thinkpad-r51/downloads/DS003878
Once done, you should be able to connect via your choice of wired or wireless, and then be able to use the TVSU application to check for other drivers.
Regards.

Similar Messages

Thinkpad R51 TYPE 1830 drivers and manual installation

Hi Community, I have a thnkpad R51 Type 1830 and have installed windows XP Professional SP 3 on it. I have been trying to manually install the LAN, Wifi and Audio drivers from the drivers available on the downloads page for this machine, but somehow, i haven't got it right yet. Can someone direct me to exact drivers for this machine as i have been stuck now for 2 weeks with this Kind Regards,Faraz.

OK, based on that info, I see the following at pcidatabase.com:
Device Id Chip Description                   Vendor Id Vendor Name
0x1077 Gigabit Ethernet Controller (Mobile) 0x8086     Intel Corporation
0x4220 Intel 54 MBit/s Notebook WLAN Card    0x8086     Intel Corporation
Wired and wireless, respectively.
From this, please try installing the following two packages from your support site:
Intel PRO/1000 LAN adapter software
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-r-series-laptops/thinkpad-r51/downloads/DS004058
Intel Wireless LAN (11abgn, abg, bg) for Windows XP, 2000 - ThinkPad
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-r-series-laptops/thinkpad-r51/downloads/DS003878
Once done, you should be able to connect via your choice of wired or wireless, and then be able to use the TVSU application to check for other drivers.
Regards.

Exact Steps to Generate Installation keys for other systems In SolMgr4.0

Hi friends,
Please provide me exact Steps to Generate Installation keys for other systems In SolMgr 4.0 SR1.
I have steps to make this thing in solmgr 3.2 as please change as it in solmgr4.0 sr1
txn SMSY
Expand Landscape components -> Systems
Right click on Systems ->New System
Type SAPID, & Installation No. (S44 , 0040099252) & sAVE
Expand Newly Added system
Right Click & Create
Now we can use the key provided by the system.
Please make required changes as applicable in solmgr4.0 So that I can proceed.
Also clear vat is the difference between ECC & ERP as solmgr4.0 mention both as two systems.
Thanks & regards
Jaswant
+91 9949676055
Cheers 'N' Joyce

Hi Jaswant,
to generate a Solution Manager Key you can process a little bit easier.
Call transaction SMSY, press shift+F5 (you get the "other objects" popup).
As System enter the SID of your Solution Manager.
->select gen.Installation/Upgrade Key (shiftctrlF10))
then you get a new popup. In this popup you DELETE all values, enter SID of the new system, the message server of the new system and the system number of the new system. Then press generate key.
With this procedure you do not have to add the system to SMSY to generate the key.
Later you should add it to SMSY, maybe you have added an SLD to SMSY then the system will be added automatically. If not you have to add it manually.
Second question ERP <> ECC
Good question, ECC is part (a main instance) of ERP, so it is up to you if you classify your system as an ERP or ECC.
Regards,
Udo Lang

Qosmio F30: How to: Manual Installation Of Windows Xp Media Center Edition 2005

Manual Installation Of Windows Xp Media Center Edition 2005 On Toshiba Qosmio F30 Laptop
Last Update 3 Oct 2006
Important Notes Before You Start:
1-These Steps Used For "Toshiba Qosmio F30" And For Other Qosmio Models That Comes With "Intel Centrino Duo" Cpu's And With Xp Media Center 2005 Installed.
2-Apply These Steps If You Have Previous Experience In Installing Windows Xp , If You Don't Have That Experience , Then You Can Use The Supplied Recovery Cd To Restore Your System.
3- Windows Xp Media Center Cd's Are Not Supplied With Your Laptop, If You Want To Get The Cd's You Can Buy It From Many On-Line Shops And If You Do So You Will Get Valid Windows Xp Product Key Which You Will Not Need It (Because You Already Have One You Can Find It In A Small Sticker In The Back Of Your Laptop And You Can Activate Your Windows With It).
In Other Words ( You Need The First And The Second Cd Of Windows Xp Mce 2005 SP2 Oem).
4- Do Not Try To Apply These Steps On Other Versions Of Windows Xp , Use "Windows Xp Media Center Edition 2005 Sp2 Oem" Only
5- You Must Have Usb Floppy Drive To Install "Toshiba Raid Controller" , It Can Be Installed Only By Having The Driver On a Floppy Disk And By Pressing F6 During The Installation Of Windows Xp, If You Do Not Install The Raid Driver Then Windows Xp Will Not Recognize Your Hard Disk.
6- Disclaimer of liability
I shall not be responsible or liable, directly or indirectly for any damage or loss caused or alleged to be caused by or in connection with the use of the this site or its content, including but not limited to delays, omissions, and inaccuracies in its content.
Steps:
1- Create Drivers Cd From "Toshiba Assist Utility" ,You Should See The Toshiba Assist Icon On The Desktop, Then In The Toshiba Assist Choose The 'protect & Fix' Tab ,There You Will Find The Option `Create Drivers & Tools Cd` And Insert a Blank Cd To Write It
"If This Option Did Not Work Then You Have To Install The Restore Cd To Get It Work" , The Drivers Are Installed In A Folder Called Toolscd In "C:" Drive. To Install Your Recovery Cd Power On Your Laptop And Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From the Cd.
2- Create Toshiba Raid Driver From The Drivers Cd, The Toshiba Raid Driver Has To Be Added During The Installation of Windows XP When Asked To "Press F6 If You Need To Install A Third Party SCSI Or Raid Driver".
In Order To Do That , Insert The Drivers Cd "from Windows " It Will Run Automatically Or Run "Browser.Exe" Inside The Cd The Select "Raid Driver" And Click On "Installation" Button, It Will Show You The Raid Driver files , Insert A Blank Floppy And Copy The Files Into The Floppy "Be Sure That All The Files Be On The Root Of The Floppy" or download the Toshiba RAID driver from the Toshiba driver download web page and extract the zip file to a floppy disk."Again, All The Files Should Be On The Root Of The Floppy Not Inside A Folder"
3- Connect Your Usb Floppy Drive And Insert Your Windows Xp Mce 2005 Cd 1 And Power On Your Laptop Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From The Cd.
When You Get The Message To "Press Any Key To Boot From Cd...", Press Any Key , If You Do Not Press Any Key, It Will Not Boot From Cd-Rom,Press F6 When Asked To "Press F6 If You Need To Install A Third Party Scsi Or Raid Driver".
The Setup Continues Until You Are Asked Whether You Want To "S = Specify Additional Device". Press 's' And Specify The Toshiba Raid Driver For Xp. Then Press 'enter' To Continue With The Installation.
Do Not Upgrade Your Xp Installation ,Start New Windows Installation And Partition Your Hard Disk , Windows Installation Will Ask You To Insert Cd 2, And Will Copy Some Files And Will Ask You To Insert Cd 1 Again ,Continue The Setup Until Windows finish The Insallation.
4- After Windows Finish The Installation Insert Drivers Cd And Select "Microsoft Updates" From The Drivers Cd Click On"Installation Button" ,Click "Qfe" And Install ONLY the Following Updates (Do Not Let The Updates Restart Your PC Until You Finish The Installation of All Updates)
A- Q896256
FIX "Computers That Are Running Windows Xp Service Pack 2 And That Are Equipped With Multiple Processors That Support Processor Power Management Features May Experience Decreased Performance"
B-Q910437
FIX "High Hit Count Watson Crash In Wu Client"
C-Q889673
FIX "Hardware (Dep)-Enabled Computer May Unexpectedly Quit After You Resume From Standby Or From Hibernation In Windows Xp Service Pack 2"
D-Q896243 (Very Important ,This Will Make SD And MMC Cards To Work)
FIX "ADD Support The High Speed SD Card"
Other Updates Are Not Necessary To Install, Because You Will Install It Later When You Run Microsoft Updates From Microsoft Updates Web-site After You Finish Activating Your Windows.
5- download and run "Intel(R) Chipset Software Installation Utility" from Intel website
(Restart Your PC After You Finish The Installation)
Do Not Install "Chipset Driver" From The Drivers Cd , It Is An Old Version , Try To Install The Latest From The Link Above.
6- Install The "Display Driver" From Drivers Cd (No Need To Restart).
Note : To Avoid Annoying Messages During Drivers Installation Try To Do The Following:-
Go To Control Panel , System Properties , Hardware , Drive Signing , Select "Ignore - Install The Software...."
Go To Control Panel , System Properties , Hardware , Windows Update , Select "Never Search Windows Update For Drivers"
7- Now You Have To Setup Your Internet Connection and Activate Your Windows So That You Can Run "Windows Updates" From Microsoft Windows Update Website
Your Internet Connection May Need One Of The Following Drivers (Depending On Your Modem)
A- If You Your Internet Connection Through LAN Then Install The "Network Driver" From Drivers Cd.
B- If You Your Internet Connection Through Wireless Then Install The "Wireless Network Driver" From Drivers Cd.
C- If Your Internet Connection Through USB Then Install The Driver Supplied By Your Modem Manufacturer.
D- If Your Internet Through Dial-Up Then Install The "Sound Driver" From Drivers CD , This Driver Will Install The Sound Driver And Will Activate The Modem Device and ,A Message Appeared "Find New Hardware ,Modem Device" Ignore The Message And Restart Your PC Then Install "Modem Driver" From Drivers Cd.
8- Now Go To Windows Update Web-Site And Install All The Necessary Updates "Try To Run Windows Updates Several Times Until You Install All The Updates Because In The First Time, Windows Updates Website Will Install 3 Files Only After That Restart Your Computer And Go To Windows Updates Site Again And Continue To Install The Updates , Select Custom Updates Method And Install All The Critical And Optional Updates".
9- install "Common Modules" from drivers CD This module is an essential component on Windows XP systems It is required to make other TOSHIBA original programs work properly.
10- Now Continue To Install Other Drivers And Utilities From Drivers Cd But Do Not Install The Following Drivers:-
Atheros Client Utility " No Need"
Bluetooth Monitor " Do Not Install This , Install Only The "Bluetooth Stack".
Enjoy Your Powerful Toshiba Qosmio Laptop.

you can see this tutorial also in this website
salah.coms.ph

Manual Reservation for Movement type 261

Dear Friends,
I want to create a manual reservation (MB21) for production order i.e. movement type 261. But system is not allowing and giving error message order category 10 (prodn order) not allowed for manual reservation.
Can some one help to know how the setting which allows manual reservation for MVt type 261
Thx
Rishi

Hi,
After my long analyzation, I came know that, this is SAP standard setting.We cann't make any changes in order category 10. As per SAP standard procedure , the below order categories do not allow manual reservation.
10 PP production order
20 network
30 maintenance order
40 batch order (process manufacturing)
50 inspection lot
So please make goods issue through MB1A , if you want tracking this issue seperatly please put your production order number in text filed.
I hope the above information is useful for you.
Please reward points if my information useful.
Best Regards,
Nagapandian.

In production order backflush how components select valuation type

Hi,
i am using backflush in production order planning where components have valuation type. when i stage them i give the valuation type. but when i confirm a operation the backflush is giving problem.
the problem is i have to enter the valuation type of componet which has to be backflushed. is there any provison to make it as default. which valaution type componenet is staged it has to be backflushed automatically.
thanks in advance
regards
madan

Madan,
During MF60-pull list where exactly do you enter the valuation type?
Try to understand the concept?
Let us say i have storage loc A and production storage loc B.
Now in production order/REM order you have entered the storge loc as B and you have stock in A.
After running MRP and when you goto MF60, for that component, system will create storage loc order during staging.
Once it come into storage loc B, how system will identify the stock that it is reserved for this order?
If you have eneterd valuation type(I could not find), once it is in storage loc B, is there any identification for that order in storage loc B.
Please come back so that I can help you?

Manual and mandatory condition type??

Hi
What happens when you do not enter a value for a manual and mandatory condition type?
What are the difference between these two?

Manual:
This indicator specifies whether the specific condition type can be determined manually during sales order processing.
If we check the box then the entry is going to be manual, if we uncheck it, it is going to be automatic.
For Base Price and Taxes, the entry should be automatic.
For Discounts and Freights, The entry should be manual.
If we check the box, in VA01 when we go to conditions at the header/item level, the condition type will not be listed. If we require we will have to manually enter it.
If we uncheck the box, in VA01 when we go to conditions at the header/item level, the condition type will be listed.
Mandatory:
This indicator specifies that particular condition type is mandatory in the pricing procedure.
If we check the box, then in VA01 at the header/item level in the conditions tab, if we delete the value in the condition type and try to save the document then system will not allow us to do it and throws an error.
If we uncheck the box, then in VA01 at the header/item level in the conditions tab, if we delete the value in the condition type and try to save the document then system will allow us to save it, without giving any error.
Mandatory check box should be checked in condition types which are compulsorily required in pricing procedure. Ex.: PR00, MWST.
If the condition type is checked with mandatory option, then value should be maintained for that condition type, otherwise the system will not allow the user to process the document.
Hope it helps you.
Regards
AK
Please reward points if helpful

Manual installation of SO8

Hello,
what do I have to do in order to manually install SO8, because Debian (as other Linux distributions) does not use the RedHat package manager for distributing packages. When I unpack the RPMs, is there a specific order to install them and what scripts have to be executed and what configuration files needs tempering?
Also, is there a documentation about to install SO8 <i>silently</i>, meaning without user interaction into a specifc location and with a particular set of components? Sort of SO7's response files?
Regards,

The Manual installation document for 3.0.9 for NT and Unix is available at OTN:
NT http://technet.oracle.com/products/iportal/htdocs/3_0_9_maninst_htm/nt/maninnt.htm
UNIX http://technet.oracle.com/products/iportal/htdocs/3_0_9_maninst_htm/unix/maninux.htm
NOTE: The manual installation instructions available in the Configuration guide for 3.0.9 is pretty old and should not be followed.

J2EE manual installation package ???

Hi,
I' wonder why Sun didn't make a manual installation package of their
java products instead of using the installer.
They used to use this way of installaing in the beginning.
It made things clean and configurable.
Where can I get a manual installtion of the latest J2EE ??? (I dont want to use the installer , copye the directory and then desintall it to have a sort of ma nual install package :)
Thanks

What exactly does the installer not allow you to do? You can specify the directory where the server is installed at setup time.

Burning audio discs in exact order of play list

I have looked at some discussion re this topic but it is all old and the problem seems not to be resolved. When I burn a disc, it places all the tunes out of order, so when I print the cover sheet playlist, it doesn't match with what is burned on the disc. This is just not acceptable. What can be done to resolve this rather irritating problem? duc13

OK, based on that info, I see the following at pcidatabase.com:
Device Id Chip Description                   Vendor Id Vendor Name
0x1077 Gigabit Ethernet Controller (Mobile) 0x8086     Intel Corporation
0x4220 Intel 54 MBit/s Notebook WLAN Card    0x8086     Intel Corporation
Wired and wireless, respectively.
From this, please try installing the following two packages from your support site:
Intel PRO/1000 LAN adapter software
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-r-series-laptops/thinkpad-r51/downloads/DS004058
Intel Wireless LAN (11abgn, abg, bg) for Windows XP, 2000 - ThinkPad
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-r-series-laptops/thinkpad-r51/downloads/DS003878
Once done, you should be able to connect via your choice of wired or wireless, and then be able to use the TVSU application to check for other drivers.
Regards.

I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..

I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate. Now I have no phone and I am becoming frustrating.

I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate. Now I have no phone and I am becoming frustrating.
It downloaded all my contacts, photo's with no problem. I called the number they gave me from my old phone and then turned it off. I then put the sim card in and charged the phone. I followed all the setup steps and no I cannot send any text or make any phone calls. I get a message that they cannot authenticate my phone to dial #8899 but get the same message.

Hello Notahappycamper1962
Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
I look forward to hearing from you and getting this addressed.
JoeL_VZW
Follow us on Twitter @VZWSupport

How can you Play Flickr set in exact order

I am using the apple tv screensaver with photos from my Flickr set. I want them played in the exact order. ATF seems to randomize them. Can I fix this?

Create an Album, Sort it how you will (View -> Sort Photos).
Select all the pics in the Album
File -> New Slideshow
Regards
TD

How to I get rid of this on my screen? "In order to continue installation, please close the following application: iPhoto"

How do I get rid of this on my screen? "In order to continue installation, please close the following application: iPhoto"
Just popped up...grr

tried that too. I rebooted and it was gone, mmh, but anyway glad it's gone

HT4414 I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?

I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?

Try posting in the Mountain Lion forum. Here is the link below. This forum is for old software circa 2003.
https://discussions.apple.com/community/mac_os/os_x_mountain_lion

Exact Order of manual Installation (thinkpad R51 Type 1830)

Similar Messages

Maybe you are looking for