Exact settings for Export to iPod in QT pro ?

I used export to ipod option with QT pro and it works great but ... it's damned too long.
And there is no access to the original settings.
I would like to play with the export to MPEG4 settings to make it faster but I need to know first what are these original settings that are used in this export to ipod option.
Somebody knows ?

DivX movies.
It works fine with QT pro and its Export to iPod option.
But it's very long.
I think it may be doing 2 pass.
And I think 1 would be enough, all other considerations being OK.
There is no way to tune this option since it comes with no possibility to change the settings.
So, what I want to do is use the MPEG4 option and change its settings to the iPod's one minus 1 pass.
But I need to know what are the exact iPod settings used by Qt pro.
Not the ones that are recommended everywhere.

Similar Messages

Best Settings for Exporting DVD Footage in a Movie File

Hello,
I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
Here's an example of what I did recently with my own settings:
http://www.youtube.com/watch?v=qFV4sT7rHGs
I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
Thanks!

First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

Whats the best settings for exporting a three camera youtube video on a mac book pro

I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

Which are the best settings for exporting comps before edditing in Premiere Pro

Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4

If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

Settings for exporting MPEG for Vista MCE

Hi
I'm new to video editing and I am currently playing with the Premiere Elements trial before I decide to buy or not.
My video is imported from a Canon HF100 in AVCHD format.
Can someone please post the settings I should use on the first screen when I create my project. I'm just setting it to 1080i AVCHD which seems correct.
Also I'd like recommended settings for exporting my final movie. I'd like to export onto DVD and some file type that is suitable for viewing using Vista MCE (MPEG I assume)
I dont mind waiting for the rendering if that means better quality. Should I just whack everything up to max quality? Or are there better ways to export?
Vista MCE is viewed on a Pioneer 42" plasma if that makes any difference.
My PC seems powerful enough as I've rendered a couple short files already.
Thanks
Alan

Alan,
I *believe* that you have the proper Project Preset. As I do not do AVCHD work, Paul_LS, or Steve will have to verify that 100%.
Now, for your Export/Delivery there are some considerations:
1.) If you edit your AVCHD footage in it's native state, the ultimate delivery would be BD for play on your 42" plasma TV. You would Burn the BD with the proper BD settings. Encoding will be handled there. (see below)
2.) If you deliver on DVD-Video, it will be down-converted to a DVD-compliant MPEG-2. One option that this gives you is having all of your editing done in HD, should you decide to later go to BD.
3.) Another possibility would be to choose a Preset for SD DVD-spec. material and let your camera do the down-converting to SD. This will speed up both the editing and the Burning to DVD. However, if you later decide to do an HD version of your Project, you'll be looking at starting pretty much from scratch and doing an HD Capture.
4.) In your particular delivery scheme, you will be using a software player, instead of a physical DVD, or BD. It is the file, and not a physical disc, that you will be using. That is about the only difference.
Unfortunately, I do not know which player/players come with Vista MCE. I would *assume* that it/they can easily handle a DVD-spec. MPEG-2 file (the same as Burned to a physical DVD disc, but without the pure DVD-Video structure - just the raw file, with no VOB, VIDEO_TS folder etc. That would allow the movie to play. However, the software player can *probably* also handle the full DVD-Video structure and allow for navigation, just like on a DVD hardware player.
I would *assume* that this OS might well have BD equivilent capabilities, as well. There, you would be Exporting to an MPEG-4 AVC or VC-1 format for HD playback. This would keep your delivery in HD (like your footage) and allow the best possible image in playback.
Those are just some rough thoughts. Others will have some very specific suggestions for your particular editing and playback schemes.
Hunt

What are the settings for exporting the best possible quality movies?

I'm trying to export movies using imove 11, there are a ton of export setting, im wondering which are the best for exporting top quality movies? assuming file size doesnt matter.

ok so heres what the movie inspector says:
Format: Photo- JPEG, 1024 x 576, Million Linear PCM, 24 bit little-endian signed integer, 2channels, 44100 Hz
FPS: 17.80
Data Rate:9.63 mbit/s
Current Size:1024 x 576 pixels (actual)
So do i want to somehow duplicate these settings?
The other thing I was thinking about was opening the file in Quicktime and using the "trim" feature to edit it down that way, although its not as neat. Would this preserve the quality? And would it get rid of the excess footage (which is what I want)? Or would it like keep that footage attached to the file somehow?
Thanks

4K footage to DVD: what are the best settings for exporting in Premiere Pro CC v7.2.2?

Hello everyone!
I am editing a big bunch of short 4K clips (XAVC in MP4) which will then go onto DVDs. The idea is to get as many of those clips on a DVD as possible. Using Premiere Pro 7.2.2 on Windows 8.
What I would like to know is whether I'm actually using the best possible settings for this case, because the video exported to MPEG2-DVD doesn't look that good. Or maybe it needs to be exported to a different format and rather converted to DVD format after?
The sequence setting are the following:
RED Cinema
Frame rate: 29,97 fps
3840x2160 (16:9)
Square pixels
The export settings I've been using:
MPEG2-DVD
Aspect ratio: 16:9
TV Format: PAL
Field order: progressive
Frame rate: 25
Video quality: 100
Bitrate: VBR
1, I've tried different bitrates, also setting minimum at 9, but this blows up the file size too much (as i mentioned, the idea is to get at many clips as possible on a DVD)
GOP: M - 3, N - 15 (haven't touched those)
Multiplexer: none (should i put DVD?)
I'm using maximum render quality
Have I given all the information?
Any help will be appreciated!@

As Ann has advised do not expect too much, you are going down a lot in quality.
Why are you also going from NTSC to a PAL output?
Premiere will drop frames to get from 29.97 to 25.
PAL DVD players read NTSC discs fine as long as they are region 0
Why are you trying to produce a DVD anyway?
A Bluray would be far better quality.
Also a minimum 9 is way wrong, c9.6 is the max in the spec and hence avoided as your system is trying to push the spec limits to close.
I used to use 6 - 7.5 - 8.8 in my VBR and they looked fine, now I am all HD.

Best settings for importing to iPod classic

Have a lot of music on my ipod that I have imported at low quality settings. Am going to take some time re-doing this so would like to know the best settings for the best quality sound. Have plenty of room and would prefer a richer sound rather than more quantity.
Many thanks.
(I assume I would put the old track in the recycle bin and then import the new track.

You might find this article useful: iTunes Encoding Strategies

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

Best custom video settings for QT on iPod

What are the best Custom video settings for creating a QT video via iMovie for use with the iPod? That is to say, I want to d/l from a Camcorder and then convert that to Quicktime...ultimately to be played on the iPod.
Thanks,
Lyman

Larry,
Try performing a Google search of world of warcraft mac graphics settings. With the popularity of the game, you'll get quite a few hits, One such hit is:
http://www.xlr8yourmac.com/games/macwowperformance.html
Steve

Which settings for exporting from iMovie '09

I have a couple of projects coming up, and I'll be using a MiniDV camera (Canon XL1S) and a hard drive camera (Canon Vixia HG21).
For final editing I'm using iMovie 6 (still feel the most comfortable with it), but need to use iMovie '09 to import AVCHD footage from the HG21.
What are the best settings to use for exporting that footage out of '09 and into '06? I hate to lose major quality on the HG21, but don't really mind if it looks comparable to the XL1S. These projects are really demanding that I keep it at optimum HD quality (besides, I'm not sure if I have the HD space to work with the biggest files. Also, I don't plan on burn to Blu-ray or anything like that. I'm just needing to burn standard-definition DVDs, and plan on doing that with iDVD.
Basically I looking for advice on the proper quality settings for these needs, and also wondering if I'm looking at any issues regarding the different aspect ratios I'll be dealing with.
Thanks much…

Many thanks Lennart, and my apologies for a typo earlier when really confused you by leaving out one key word. I meant to say, "These projects are really (not) demanding that I keep it at optimum HD quality…"
I like your idea of pillarboxing the whole project, filling an entire widescreen TV with my Vixio footage. I assume the key is to open my new iMovie '06 project with the "DV Widescreen" setting, right?
Regarding how to convert AVCHD down to SD… I've been experimenting some with iMovie '09 on my intel-MacBook. Please tell me if I can forego the VoltaicHD purchase by doing this:
- I'm importing my Vixio footage into '09, choosing the "Large - 960x540" setting, just to keep the file size down.
- I'm then choosing Share>Export Movie, and again, I'm choosing the "Large" radio button.
- When the movie has exported, I'm seeing that it is saved with a .m4v extension. iMovie '06 will not allow me to drag a .m4v file into the clip pane. However, if I change the extension to .mov, I AM able to drag it in, and it appears that all is working ok.
What do you think? Is this workable? Am I sacrificing something with this method? Though I have not yet ripped anything to DVD, the quality seems good, (for SD standards, anyway).
One other question: Is it possible to export multiple clips out of '09 so that they can be brought into '06 individually? So far, all I'm able to do is to export them as one complete "movie," with all of my raw clips locked together. I'd like to have them separated when they arrive in '06. Maybe this is easy to do, and I just have not figured out this feature in '09.
Thx again…

Best settings for exporting from AE

Hi,
I am wondering what the best settings to export to from AE for editing in Premiere CS5.5. Previously I would digitize from tape and would export lossless .avi from AE but now I am using XDCAM EX 1080 50i sequence presets on Premiere and I wonder if I should amend the settings from AE or just keep them as lossless?
As always thanks in advance!

Keep it lossless.

Best settings for exporting to play in Windows Media Player on Powerpoint

I'm trying to export from FCP X by sending clips to Compressor 4.04 however the online lessons on lynda.com - my go-to source - and in Compressor manuals don't appear up-to-date with the actual latest revisions and I'm confused about whether to use QuickTime Export Components to get video that will play instantly in Windows Powerpoint either if its running on a Sony PC or being projected on a big screen (not HD).
Also lynda.com says 10,000 bit rate is best but the version used in the lesson limited one to 10,000 while the update goes past 30K. Which setting will work best for my purpose?
Some help on these settings for this novice Compressor user sure would help me make my deadline. My deliverable to a client is a collection of clips that play in the Windows Media Player. thanks
Compressor

Are you referring to a Lynda.com Compressor tutorial or one of their many PPT tutorials.
I agree that 10 Mbs is a nice general quality level – depending on your footage, of course – the content, the lighting, etc. WMV is probably the safest – although MP4 should be good as well,
Hard to be more specific except to say, Test. A preset that works well for one movie may look not-so-great applied to another.
Take a short, representative section and encode. Project the output file and see what you think.
Good luck.
Russ

Best settings for exporting crisp video/graphic from iMovie to YouTube?

Hi, I am working on a video for a client and after viewing on YouTube they had some issues with the type not looking "crisp," and I'm not sure how to fix it, not sure if it's a YouTube thing or something I am doing wrong.
I am working in iMovie 6/HD on OS 10.4.11. I do my "type slides" in Photoshop and import them into the iMovie as photos (JPGs). I know some text/titles can be done in iMovie but there is very little control I have over what goes where, so by making my type slides in Photoshop I have more creative control to do what I want. I have done tests and it doesn't seem to matter what resolution the Photoshop files are when they're imported, the results are always the same.
If anyone has a better suggestion for doing the type slides I'd gladly welcome them, but I think what I really need to know is the following:
What are the best expert settings to export my iMovie file as, so that when I upload to YouTube, the quality stays fairly crisp? Or does YouTube's compression just negate anything I can do on my end?
I have googled and found settings recs on other sites and other boards and tried a bunch of them and my results aren't any better than my original effort.
From another post on this board I discovered I could play with the Filters setting when exporting, and I have set that to Sharpen and also used the Brightness filter to lighten the video (it was a little dark). I uploaded to YouTube and I think it is a little better, but would still love the info if anyone has a guaranteed rec for correct settings for YouTube video from iMovie HD/6.

Hello Brian,
Have you tried de-interlacing before exporting?
Sometimes, when I'm in a rush, I would expand the Canvas/Viewer (viewed at 100%), pick the clearest frame, and do a screen capture.
For example, with the captured image (in Photoshop), I have a marquee preset at 640x480 (NTSC). I created an action to crop, resize to 720x480, then set the Pixel Aspect Ratio to NTSC.
Gary

Exact settings for Export to iPod in QT pro ?

Similar Messages

Maybe you are looking for