Exactly how do you use OSX install disc to erase start up disc

Cannot get OS X install disc to erase start up disc. I restarted holding down c key, but install disc keeps ejecting.

Sop, are you OK now?
10.4.7
Disk 1 2Z691-5859-A, Disk 2 2Z691-5862-A ...
for 17" iMac (Late 2006) Intel Core 2 Duo 2.0GHz, 2.16GHz, 20" iMac (late 2006) Intel Core 2 Duo 2.16GHz, 2.33GHz
Disk 1: 2Z691-5859-A
Disk 2: 2Z691-5862-A
Compatibility
eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), iMac (Mid 2006 17-inch), iMac (17-inch Late 2006 CD), iMac (17-inch Late 2006), iMac (20-inch Late 2006), iMac (24-inch Late 2006), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), Mac mini (Late 2006), MacBook (13-inch), MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch Glossy), Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD)
http://www.welovemacs.com/2z6915862a.html

Similar Messages

Mac: How do you use the "Install Manager" to update Flash?

So on a Mac with 10.3.181.22 installed, I went to a web page and the "Adobe Flash Player Install Manager" ran and notified me that an update to Flash was available.
I didn't want to install this at that time, so I dismissed it.
How do I force another check for an installation update procedure? If I manually run the Install Manager in /Applications/Utilities, it only gives me the option to *Uninstall* Flash Player and revisiting the web page (or running some other Flash animation) did not prompt me again that there was an update.
What am I missing to trigger the automatic notification/installation?
- Steve

Hi, I'm not familiar with that Mac feature since I don't use a Mac. However, you can go to this site and Install:
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Also you can now use the automatic Flash Player notification for the Mac here:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
With this, the next time Flash Player has an update you will receive a prompt and can choose to "Install now"/"Remind me later" or "Don't Install" I use it all of the time and the update is done in under 2 minutes!!
Hope that helps,
eidnolb

How do you use "find my phone"? I can't find it and I'm not sure I installed that app.

How do you use "find my phone"? I can't find it and I'm not sure I installed that app.

The app is not necessary; that only for tracking from another iOS device. If you set up Find My iPhone, you can track the iPhone from the iCloud web site:
icloud.com/find
If you didn't configure Find My iPhone on the device before you lost it, then you're out of luck.
Regards.

How do you use new ipod nano with itunes 10.6.3?

How do you use new ipod nano with Itunes 10.6.3. I have MBP and it lists itunes 10.6.3 as most current version and won't let me install itunes 11

The seventh generation iPod nano requires at least iTunes 10.7 and Mac OS X 10.6.
(85225)

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

How do you use wirelless keyboard with emoji?

Just downloaded emoji on ipad. Have a wireless keypad! how do you use it?

I see this:
Connecting a Music Keyboard to Your Computer
If you play a keyboard instrument, you can connect a MIDI-compatible music keyboard
to your computer to play and record Software Instruments.
To connect a music keyboard to play Software Instruments:
If the keyboard is a USB MIDI keyboard, connect the USB cable to the keyboard and
to your computer.
If the keyboard is a standard MIDI keyboard, connect the keyboard to a MIDI
interface using standard MIDI cables, and connect the interface to your computer.
Be sure to follow the instructions that came with the keyboard, which may include
installing the correct driver on your computer.
This doesn't tell me what I need to do though. I'm sorry if I sound like a moron, but I can't figure this out haha. I've got everything plugged in and turned on. What is the next step...and the step after that....to make it so that when I play my keyboard, it shows up on Garageband and I'm able to record...

How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver? I have been trying with no such luck.
   I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth. But for now, I would just like 2 computers to talk and then eventually talk to our own device.
One is a desktop w/ the Belkin F8T012 USB adapter. It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash. It says it cannot install it because it cannot find the necessary hardware. I thought this USB adapter was on the approved Bluetooth devices list? What else should I try? Another Bluetooth USB adapter?
The other computer is a Dell Latitude 820. It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module. On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter). It came with a serial port interface which we modifed to go through a bluetooth interface. It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port. But we would like to use the Bluetooth VIs in LabVIEW. I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well. Do I just uninstall the driver and then try to have Windows install its own driver? Do you have any other recommendations?
Thanks,
Javi

Hi Javi,
This sounds like an issue with Windows and your specific Bluetooth devices. As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers. Take a look at this link for specific requirements for using Bluetooth with LabVIEW. Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here. Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver. You could check out the Microsoft Knowledgebase for more information. Thanks and have a great day!
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

Windows 8 how do you use it

i just installed the pre realase of win 8 in boot camp on my mac mini, it installed faster than my pc which i installed at the same time and it runs here but not on pc , but i cant figure it out.
how do you use it? it looks like my xbox/android

Connect the speaker output from the airport express to the line in on your hi-fi amp. You will need a cable with a 3.5" jack (mini-jack) on one end and twin RCA (phono) connectors on the other - one will be red, the other white.

Cssmill - how do you use it?

Looking at cssmill for the first time, and i'm trying to figure out some things...
1) how would you use cssmill to create the default - out-of-the-box stylesheets? The ones that are deployed after install don't have any 508 styles, but they are generated by cssmill. You would have to edit the template files to exclude these styles.
(edit, i see now that removing the d_ styles is done by the make_508_css task, but its erroring out on my machine)
2) out of the box css has no comments. cssmill includes all comments. run them though a css compressor first?
3) make_portal_css. is this a relic from yesteryear? why would the portal ever use mainstyle-en.css instead of mainstyleX-en.css?
Is it worth trying to make changes to template files or just edit the resulting CSS manually?
I'm thinking this should be my methodology:
1) Create custom color.propertiles file(s) that make sense for my organization
2) Generate css file
3) paste all my custom stuff at the top
I'd really love to get away from using cssmill completely but not sure if its possible.
Edited by: Joel Collins on May 18, 2009 12:33 PM
upon closer inspection, it looks liek the make_508_task is failing (silently) wtih the error: "The requested operation cannot be performed on a file with a user-mapped section open". this is what removes the comments and d_ lines
Edited by: Joel Collins on May 18, 2009 1:22 PM
i updated the java file under bin and it works now
http://joelcollins.posterous.com/cssmill-508-fix

I'm testing out a new way to do the stylesheets....let me know if you guys have any ideas or concerns...
so i generate the stylesheets using cssmill...but then i rename them to mainstyleXX-en-orig.css
then I create a custom stylesheet, wtih all of our custom styles (we override a lot of stuff...)
then, i add @import statements at the top of that css class for the orig...
so my stylesheet looks liek this:
@import "mainstyleXX-en-orig.css";
@import "analytics.css";
html { height:100%; }
body { font-family:arial, Verdana, sans-serif; font-size:12px; line-height:1.4em; color:#333333; margin:0px; padding:0px; height:100%;}
p { margin:1em 0;padding:0; }
a:link { color:#003399; text-decoration:none; }
a:visited { color:#810081; text-decoration:none; }
a:link:hover { text-decoration:underline;}
a:visited:hover { color:#810081; text-decoration:underline; }
... etc...
This way, when you orerride a style that is in the original stylesheet, you dont' have to modify the orig.css...

How do you use Default Resource Access Information?

I have some 10g Forms & Reports that I want to use with SSO and they will all be connecting to the database with the same connection info. I know how to configure a Default Resource Access Information, but how do you use this with Forms & Reports?

Douglas,
the default Resource Access Infomation should be the connection information right? This is used in conjunction with SSO. You need to configure your F&R applications to delegate authentication to SSO by placing ssoMode=true in the config section of formsweb.cfg.
The Forms Servlet will connect to OID retrieve the Resource Access Information (descriptor) for a given user and automatically log them into the application.
Users will need a global identity in OID and SSO must be enabled to use resource access info with F&R
regards,
tt

How do you use emojis in the iPhone 5s

How do you use emojis in the iPhone 5s

Tap on Settings, General, Keyboard, Then Keyboards, Add New keyboard, and choose emoji.
The next time you are in text messaging or email, and the keyboard pops up, select the globe to get to the emoji symbols.

How do you use forward and back button on mouse and use "zoom" in web browser.

Ok so apparently this forum is ruled with an iron fist or something my very honest and truthful problems with these issues seem to have been instantly deleted in my last discussion?
I'll try this once more.
1) How do you use the forward and back button on a mouse without having to buy a product like Steer Mouse? There must be a way to do this without having to buy a program given it's such a useful feature that 99% of users need. I don't want to spend hours researching something that should already work. Any advice?
2) How do you zoom in for web browsers like Chrome without it globally zooming in everything on the monitor (even background applications). I don't want to zoom in background applications. I want to be able to zoom in the web browser and still maintain all the features like the side bar, not just a little magnifying glass type thing.
I'm currently zooming in with the CTRL-Middle Mouse button, but I can't find a way to use this feature so it's useful to browse the web it seems to not scale the browser correctly but rather is a global zoom. Any solution for this?

Thanks so much!
Like I said I am new to Apple products so it's still unclear to me which programs I do or don't need as I'm setting up and configuring all my software and devices.
The Logitech Control Center appears to work perfectly for what I was trying to do!
I accidently clicked "This helped me" instead of "This Solved My Question", sorry about that this was a solve!

How do you use ReadyHosting's myLittleTools?

A client I do some work for occasionally, has normally wanted me to add links to various partner websites. These have all been pretty small over the years I’ve done this work for him, like make 5 at most. Well now he’s hit me
with about 2 dozen partners that he wants a link to. When it gets to this point I think of databases.
I created a MS SQL Server database on Ready Hosting’s server, associated with my client’s account. (Got his permission before doing so.) Then I created a user for that, so that I could get into it. Ready Hosting uses something
called “myLIttleTools” for managing and administering one’s SQL Server databases on their servers. So I tried going into it, entering the credentials that I created. But it refuses to allow me to log in. I get the following error message:
“Error -2147217843
Login failed for user ‘MyID'.
Provider=sqloledb;Data Source=ReadyHostingServer;Initial Catalog=ClientDB;User Id=MyID;Password=MyPassword;Connect Timeout=120;”
(Clearly I’ve changed the credentials here; they’re not what I’ve created.)
Two days ago I opened a help ticket with them. Still haven’t heard from them.
So I’m asking here, does anyone have any experience with SQL Server database management on ReadyHosting? How am I supposed to log in when it refuses to accept the credentials for the user I created on it? They want you to use
this “myLittleTools” thing, but WOW how do you use that when you’re prevented from even getting into the door?
Rod

Readyhosting is still around? They were a really good host back at the turn of the century then were bought by a company that proceeded to hire incompetents and became totally unreliable. I'd have thought they folded a decade ago.
As others said, this is an issue to be resolved through Readyhosting's support personnel. EW is not really deigned for managing database servers. If their connection permits it you can use the MS SQL tools to manage remotely (doubt they allow it though)
and most people use MS Web Developer Express for their database work on small websites not EW.
Free Expression Web Tutorials
For an Expression Web forum without the posting issues try
expressionwebforum.com

How do you use AdobeExportPDF??

I'm not sure what you have changed with ExportPDF, but have used it in the past and there was always sign in page that popped up after you paid the annual fee. Now it keeps trying to sell me the subscription again. How do you use Export now? You have already charged my bank for the fee and I can go to my account when I sign in and see that I'm supposed to have an active subscription, but there is no place to select the option of exporting a PDF to convert to word. I have called Adobe customer care and guess what, no support available there nor help getting to the right people to help. I see from the discussions on this page that it seems to be a common problem.
So, how do I use Adobe ExportPDF?
Is this a scam?
Why did you make it so difficult to use now?

Im having the same issue!!! Help

How do you use multiple outputs on a VSTi like Kontakt or Battery?

how do you use multiple outputs on a VSTi like Kontakt or Battery with Logic Pro 7.1? I've heard someting about using AUX busses, but can anyone please provide an actual clear, step by step basic guide?
I've had Logic 3 months now and just don't know how to do this yet, and have yet to actually find it in the manual!!
thx

http://www.sonikmatter.com/wiki/index.php/Tutorial:MultiChanAudioSetup

Exactly how do you use OSX install disc to erase start up disc

Similar Messages

Maybe you are looking for