Exactly RAM type for M200 (1,8GHz)

What exactly type of RAM can I buy to put in my M200 (I have 2 512Mb and want 1,5Gb instead.
I', confused by the many types of DDR ram available on the market,
Thanks,Jorgen

Hi
Well, as far as I know this unit has 2 memory slots and supports max 2048 MB (2x1024MB)
Furthermore I found these compatible memory modules.
PC2700 256MB (PA3311U-1M25)
PC2700 512MB (PA3312U-1M51)
PC2700 1024MB (PA3313U-1M1G)
Hope this info will help you to be well versed in the whole wide world of memory modules ;)
Bye

Similar Messages

Ram Type for a dv4t-1200

Hi I would like to find out what type of Ram that I need for my HP DV4T-1200 Laptop can some one tell me where to find it Thank You in advance

Hi Mika
Look at the [iMac (Mid 2007) Installing or replacing memory|http://docs.info.apple.com/article.html?artnum=306204] article, you can use RAM module sizes of 1 or 2 GB in each slot.
Then look at [The Dealram Site|http://dealnews.com/memory/prices/systems/Apple-i-Mac-Intel-PC2-5300-DDR2- SO-DIMMS/41494/2GBx2.html] were you can choose anything from a single 1 or 2GB module to the 2 or 4GB kits from different suppliers and sellers.
Crucial, OWC, Samsung, Corsair, Mushkin and Kingston modules have all been approved by many users here in the forum. Stick with the suppliers that sell name brands and offer a lifetime warranty!
Dennis

RAM type for MSI K7D Master?

Hello,
I am looking to purchase the K7D Master and I was wondering what kind of RAM to purchase for it. Can I use PC2700 DDR or will that just waste my money considering the clock speed of the board is 266MHz and the clock speed of PC2700 is 333MHz.
TIA
Axle

I just read in this thread that someone made the XMS memory work in the K7D Master L. Check out this thread:K7D Master L MPX boot issue
Too bad I did not know how to make it work 4 weeks ago... ;(
jim

Output type for a SAPscript

Hi All,
I want to know the output type of SAPscript form F110_FR_CHEQUE. Could anyone help me in this regard?

Hi,
go to transaction nace and select application you are interested in eg. V1 for SALES, V3 for BILLING etc. Click on output types button. You can see all the output types configured for delivery document. Select an output type and click on processing routines on the left. Go through them one by one and you can find the exact ouput type for your SAPScript.
You can also check in table TNAPR for formname as your scriptname.
KR Jaideep,

2 GB of RAM in the eMac? Exactly what type please/

OK. So I'm just finding out now that my 1.25Ghz eMac is actually capable of running with 2 GBs of RAM, rather than the 1GB max that Apple publishes.
Assuming that this will actually work, it is welcome news for me.
1. Are there any problems that I should expect to see?
2. Exactly what type of RAM sticks should I be looking for?
[I know they're 184 PIN. It also looks like I should be asking for "PC2700", whatever that means.]
3. Are there any other labels that I need to make sure the RAM I buy has?
4. Is it possible to get a 1GB "184 PIN PC2700" RAM stick with that won't work in my eMac's RAM slots?
5. How unreliable is used RAM?
Any help appreciated.

Hi,
I too am in Toronto. I have been using Macs for more than 2 decades; and shopped around for the best deals for just about everything in the way of Mac parts.
Regardless of where you buy, PST and GST are added to whatever price is listed, thus the extra cost of buying elsewhere is the shipping.
For RAM, I have had excellent results buying from Ramdirect. So much so that I no longer even bother to compare prices. (For the record, I have no relationship of any kind with the company other than as a satisfied customer.) Even with the shipping cost added, I was not able to do better for price.
http://www.ramdirect.com/
You can email me if you want to carry on this conversation off-line - click on my name.
And thanks to Allan Jones who sent me an email alert about a fellow Torontonian looking for advice!

RAM cards for Intel iMac 2.8Ghz versus 2.8Ghz Extreme

Hi everyone,
I've just bought 4GB of RAM from Crucial to upgrade my year old iMac. Once I had placed my order I noticed that they recommended different cards for the machines with Intel 2.8GHz and 2.8GHz Extreme chips. I don't know what the difference in the memory is but they must have been different somehow as one was about $20 more expensive.
Anyway, I bought the ones for the 2.8GHz Extreme as thats what I thought I had (that's what I paid for anyway!) but I've just checked in System Profiler and there is no mention of my processor being 'Extreme' or in fact anything other than an Intel Core 2 Duo with a speed of 2.8GHz.
So my questions are:
a) Have I been ripped off by Apple and my machine isn't 'Extreme' at all - how can I tell?
b) Will the RAM I bought work on my machine whatever one it is? The RAM is certainly the correct type, i.e. number of pins etc.
Thanks for anyone that can help. If you have one of the 2.8GHz Extreme machines from last August, could you have a look in your system profiler and see if it mentions it being extreme?
Thanks again,
Neil

This is very easy, if you purchased your machine prior to April 2008 it is either the 2.4 or 2.8 machine. To find out for sure which one, go to the System Profiler and look under hardware you will see something very similar to this:
*Hardware Overview:*
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version: 1.21f4
Serial Number: XXXXXXXX
This is from my machine I ommitted the serial number. An even more simple way to find out is to look at the box it was shipped in, I'm assuming it is NOT a refurb model as they ship in plain brown boxes.
If you purchased your machine after April 2008 it is a little more difficult but still pretty easy. Your System Profiler will be very similar but the Bus Speed will be 1066 MHz.
The memory specification for all the mid 2007 Aluminum iMacs is the same. Use:
667 MHz, PC2-5300, DDR2 compliant (also referred to as DDR2 667) popular brands are Crucial, Kingston, OWC, etc.
If it is a early 2008 (Bus Speed 1066MHz MHz) then you will need the PC2-6400 memory chips, again all the early 2008 Aluminium iMacs use the same memory chips.

Regarding the exact link for configurate type for leave request

Hi all:
I am trying to Customize Types of Leave/ Absence Types for Leave Requests following the route Personnel Management u2192 Employee Self-Service u2192 Service-Specific Settings u2192 Working Time u2192 Leave Request u2192 Processing Processes u2192 Specify Processing Processes for Types of Leave, but it turns not be there, maybe it is because of the sap version, could you please tell
me the exact route for Customize Types of Leave/ Absence Types ?
thank you very much

sorry , the above link is correct , I found the above linke missing like personnel management--employee self-servce, because Basis didn't delopy some pakcage , could you please tell me what package missed.
thank you very much .
Edited by: jingying Sony on May 7, 2010 7:58 AM

Model wage type for performance pay and additional pay

Hi gurus,
my client wants performance pay and additional pay in the additional payments. I am confused what model wage types to be copied for this. i tried copying m2sf for these but the prob is if if the employee is joining in the mid of month say 15th , then if i am trying to give performane pay of 10,000 rs then it is calculating only 15 days pay n giving 5000 in the payroll n payslip.
if i try to copy the other wage types like m200,m281 n m282, i have the same problem . but if i copy m280 for both of these w.ts ,then it is giving the flat amount irrespective of the joining date of employee. but my question is does it have any implications on the calculation of the tax. coz i observed different model wage types deduct different amounts of tax. i.e if i copy m281 for performance apy n give the value as 10,000 then ,it give some x amount of tax on 10,000 similarly if i copy some other model w.t , for same amount of 10,000 it gives some other amount of tax.
im really confused ,plzz help

Hi ramm,
I have checked the w.t amount in /434
/434 Total Incom                                                   182,060.00
n my other w.t amounts are:
4MOB Mobile Reim                                                    25,000.00
4PER Performance                                                    15,000.00
5CEA Child Educa                                                       193.55
5CON Conveyance                                                      1,451.61
5HRA House Rent                                                      4,838.71
5SPL Special All                                                    19,354.84
/001 Valuation b01                          179.90
/002 Valuation b01                          179.90
/118 PTax Basis 01                                                  75,516.13
/119 PTax Basis 01                       96,774.19                  35,516.13
2CAN Canteen Ded01                                                   2,000.00-
2NOT Notice Deuc01                                                   2,000.00-
2OTH Other Deduc01                                                   1,500.00-
5BAS BASIC      01                                                   9,677.42
I dont know how to check the slabs, i am new to payroll,can u guide plzz

RSAR2318 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Error RSAR238 : IDoc type for source system T90CLNT090 is not available
I have already checked trx & dtps, but could not find resolution.
Kindly help me with this error.
Thanks and regards,
MS

M Sharma wrote:
But how exactly can I create when T90CLNT is not active? Help please.
Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

Data Type for Process Flow... PB with Date?

I've got a problem by passing parameters in process flow.
I have a mapping with a parameter DATE_EXEC (data type : DATE) and a default value that is TO_DATE('20/01/2007' , 'dd/mm/yyyy') . My mapping is working good when i launch it.
I have a process flow which contains the mapping. This process has a parameter DATE_EXEC (data type : DATE). I bind the 2 DATE_EXEC. But when i launch my mapping the value is not recognized, I try with :
- TO_DATE('20/01/2007' , 'dd/mm/yyyy')
- 20/01/2007
- 2007.01.20
- 2007-01-20
My question is what are the data type in process flow? They are not ORACLE TYPE.
For example , a parameter in a mapping which is a VARCHAR2 must be input between quotes but if you bind it to a parameter of a process flow which is a STRING (not ORACLE Data type) , you must input it without quotes?
Anybody has some rules about that?
I apologize for my english, i'm a french people.

Here is some information on the literal quote or not quote query and what I think you need to do at the end, hope it helps. Not exactly intuitive...since the flow designer (you) have to know what is a PLSQL object and what is not.
1. Literal = FALSE
When Literal = FALSE is set then the value entered must be a valid PL/SQL expression which is evaluated at the Control Center e.g.
'Hello World!'
22 / 7
2. Literal = TRUE
When Literal = TRUE then the value is dependent on the the type of Activity. If the activity is a PL/SQL object i.e. Mapping or Transformation, then the value is PL/SQL snippet. The critical difference here is that the value is macro substituted into the call for the object. The format of the value is identical to that entered as default value in the Mapping editor. e.g.
'Hello World!'
sysdate()
If the activity type is not a PL/SQL object then the value is language independent. e.g.
Hello World
3.1427571
What you should try......
Check the map activity parameter in your process flow to see if literal is false (an expression), set it to false and then try using your TO_DATE('20/01/2007' , 'dd/mm/yyyy') expression, deploy your flow and execute. Alternatively the user guide defines the DATE type for flow with the format YYYY-MM-DD so you can have the parameter value as '2007-01-20' use literal equal to true and remember and quote your value.
Cheers
David

Account groups & Sales order types for 5 Companies

Dear All,
There are 5 company codes under one client but these are five different operating entities (Companies). I mean there is no intercompany process at all. One company will act as a customer / Vendor to another and even they file there IT returns separately.
But the business (Sales / Purchases) processes in these company codes are exactly the same.
Please help me out with the following issue under the above situation:
1) Will there be a common Account Group for all 5 company codes as it is defined at client level or there should be a separate Account Group Company codewise as 5 companies are operating separately.
2) Similarly Sales Document types i.e., ZIN, ZQT, ZOR, ZLF, ZF2 should be defined separately for each company code or not?
Regards,
Pankaj

Hi Akasha,
You said : for the document types again , a single document type can be used for all the company codes, unless there is some other specific case where in seperate document type is required
Cud you plz lemme know an example of any such specific case. Because if single document type for 5 companies is not affecting any Business Process Financially and operationwise. I can go ahead by sharing one document type for 5 Companies.
Only one thing cud be is the number range, which will also be shared. Am I right ?
Thnx & Best Regards,
Pankaj

Best Practice - Order Types for Consumers

I was curious what the best practice is for entering orders within the CRM Interaction Center. Do you have a separate order type within the CRM system and pass it to the SAP system for "Consumer" orders and then have a different order type that is defined in the ECC system for distributor/wholesale orders?
We are trying to determine if it is best practice to have a separate order type for consumer orders or not.
Any help on this topic would be greatly appreciated.
Thanks,
Darcie

Hello Darcie,
I received the following guidance from one of our CRM consulting practice managers at SAP:
"My recommendation to customers is that they separate out the number ranges and order types. Especially if they are being created via different sales channels. The reason is two-fold:
1. Gives greater visibility to what is created in one channel vs another channel (easy to report by order/document type and visually, someone would see an order that starts with 7 and know that itu2019s for consumers whereas one that starts with a 4 would be for wholesale accounts).
2. Even if the order/document types behave the exact same way today, they may want the flexibility to be able to change how a consumer order behaves without affecting the wholesale orders. They could always add the new order type later, of course, but itu2019s easier to set that structure in place now."
Regards,
John

Z condition type for surcharge need to be displayed in billing doc only.

Hi ,
I am having going to create condition type for surcharge, this condition type need to be diplayed only in billing doc.condition value should be calculated based weight of the material in delivery doc and scales in condition record.
scales values are as below:
Access key:
sales org/dis channel/ route /sales unit(KG)
DE10/02/DETX1/   1 Kilo   =   30 u20AC
skales:
DE10/02/DETX1 / 31 Kilo = 35 u20AC
DE10/02/DETX1/ 41 Kilo =   40u20AC
DE10/02/DETX1/ 51 Kilo =   45u20AC
then for 52 Kilo we have price for these item with 52 Kilo = 45 u20AC
where exactly need to do the config and development changes for displaying in condition type in billing doc only.
Thanks in advance.
Regards,
RAM

In the Pricing Procedure , maintain requirement as 24 against the Z Condition type.Now it will reflect the value only in Billing Document.
Best Regards,
Ankur

Default billing type for delivery type

Dear friends,
I am doing STO scenario. After creation of purchase order and delivery I am creating proforma Invoice with reference to delivery document. By default it is taking F2 billing document type, but I want my own created proforma invoice ZF2 as default billing type for this delivery type. Is it possible? If so how?
Regards
Rama

Dear Rama Rao
Go to VTFL, select your delivery type and assign ZF2 billing type so that whenever you create billing for delivery, by default system will take zf2.
thanks
G. Lakshmipathi

EDI Message Type for Credit Memo inbound message

Hi Experts ,
We have ECC6.04.
We configured Incoming vendor invoice idoc ( Message Type - INVOIC, Basic type - INVOIC02) which is working fine. We also have Credir Memo incoming message ( Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)
I am using same IdoC in WE19 that of Invoice, which successfully posted and editing the BSART as CRME and entering the Messgae type GSVERF , but when I am posting it system is giving error
No record exists in T661W for vendor 2000001 , plant , unloading pointMessage no. V4032
Diagnosis
The system could not determine a sold-to party as no record has been specified in Table T661W for the displayed supplier, plant, and unloading point values.
System Response
IDOCS processing is terminated.
Procedure
Please create a record in Table T661W for the above values and restart the IDOCS planning from electronic mail.
and
EDI: Syntax error in IDoc (segment cannot be identified)Message no. E0078
Diagnosis
The segment E1EDK04 does not occur at the current level of the basic type GSVERF03 (extension ).
This error can have several reasons:
The segment E1EDK04 is assigned to a group whose header segment does not occur.
The segment E1EDK04 does not exist in the syntax description of the basic type GSVERF03 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type GSVERF03 (extension ).
Th table T661W is for Vendor, partner decribtion, Sold to party, Unlaoding Point. So I am not getting whsy sold to part relevant table ssytem is asking to make entry ?
Can anyone please suggest/help me what is the problem and solution on this ?
Thanks
NAP

Hi ,
Currently we are using Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)..which is giving above error. I just found that process code GSVE is for Outbound message
Can any one suggest / confirm what should be exact Message Type , Basis Type, Process code and Funct. Module requiered for processing EDI inbound message in MM - Logistics Inv Varification ?
Thanks
NAP

Exactly RAM type for M200 (1,8GHz)

Similar Messages

Maybe you are looking for