Exam Reporting

I receive this error message for my exam:
SCORM 1.2 cannot report a total score of more than 100 as points. Please choose to report data as a percentage.
PROBLEM: 1 course
10 English questions - 100 points
10 Spanish questions - 100 points
Total points 200
I don't want the English totals to be calculated in with the Spanish totals.
If I use the percentage as suggested the calculated score is based on the total points of 200 (not 100)
Any suggestions
Missy

Use dynamic branching.
Have all English questions on one branch and all Spanish ones on another branch. Get users to choose their branch early. Use Branch Aware option so that only those questions the user actually sees will be factored into the scoring.

Similar Messages

Exam Result Report for Beta Exams?

I recently took a beta exam, passed it and received the cert. However, I don't receive any exam result. Is Oracle / Prometirc supposed to send the exam result to beta exam candidates?
When I took a production exam, I got the result (with breakdown on scores in each section) immediately after th exam. This was several years ago but I assume it is still the current practices. Then I can know in which area I am weak.

Hi!
I took several Beta exams and usually I got the exam report about 4 weeks after the beta period ended. I always got it before I got the certificate. Maybe you should ask what happened to your exam report, maybe it got lost on the way.
Best regards,
PP

I Just Did the Exam 1Z0-047 - What's Next?

I just passed my first (Internationally Recognized) Oracle exam 1Z0-047. Hmmm, i got %83. I think its good since its my first exam, i felt i could make it better up to %90+. The paper shows 9 bullet points of topics that i may show review. The topics they mentioned i know it really well. Shall i take the exam again? I don't think its a big deal probably %83 is good. Anyway, the exam center gave me a printed paper of my total score. They said Oracle will send another Certification to my address. Which Certification is official? The one i have been given by the exam center is a printed cert (black and point). Which one should i show to the employers?
I'm happy as well as sad because i knew the mistakes i made are silly (i wish to rid of the bullet points argghhhh) + i did the exam after having at least 3 months college hands on experience.

user11164565 wrote:
I just passed my first (Internationally Recognized) Oracle exam 1Z0-047. Hmmm, i got %83. I think its good since its my first exam, i felt i could make it better up to %90+.
The paper shows 9 bullet points of topics that i may show review. The topics they mentioned i know it really well. Shall i take the exam again? Be cool. - thats good. Congratulations.
NO DO NOT TRY TO TAKE ANY PASSED EXAM AGAIN - its against certification candidate agreements : [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=138]
Although the suggested topics are a guide dont dwell on them too much; if you feel you know them ell enough thats fine; move on. Because of the effects of small samples sizes on individual topics these can easily become skewed.
I don't think its a big deal probably %83 is good. Anyway, the exam center gave me a printed paper of my total score. They said Oracle will send another Certification to my address. WhicCertification is official? The one i have been given by the exam center is a printed cert (black and point). Which one should i show to the employers?
Keep both. 1z0-047 is an exam with fulfills a certification requirement so you get a success pack including a certificate; and thats even more important. Thats the best one to show to your employer; but it may be 8 / 10 weeks beforeyou received it. (NB: Oracle does not send a copy of your exam report - they will only send certificates - however there might be changes when they move to Prometric).
I'm happy as well as sad because i knew the mistakes i made are silly (i wish to rid of the bullet points argghhhh) + i did the exam after having at least 3 months college hands on experience.Then your mistakes will help you for the future.
Rgds - bigdelboy.
Whats next is up to you. The UK government is pleased to recommend as follows :-) : [http://whatsnext.direct.gov.uk]. If it oracle education or certifications read the forum announcements and visit [http://www.oracle.com/education] and [http://www.oracle.com/education/certification]; otherwise browse OTN at [http://otn.oracle.com]. Or you may wish to spend your time doing something completely different ... your choice.

Will we lose our certification history, if we leave our company?

I have a strange situation.
3 years ago, i registered to both OTN and Certview with my old email address, my old company's email address.
That company is closed. When i forgot the OTN password, i couldn't succeed to login to OTN, because it sends the temporary password only to the email address. No security questions, no alternate mail addresses. So i got a new OTN account with my new email address.
Yesterday i took an exam to upgrade my OCP certification. There were not any problems with pearsonvue. I could change my email address, registered for the exam, and took the exam.
I got an email from Certview to see my exam score. I tried to login with my new OTN account, entered my Oracle testing id, and certview did not allow me to login. It says another email address(my old email address) is registered with that testing ID. It suggested me to login with my old email address.
I forgot the password of my old account's password. I cannot use remember password because the only way to remember password is sending temp password to the registered email. My old company is closed, its domain is not in use. So there is no way to use my old email address.
I wrote lots of mails to OTN help, Certview help, etc. They always close my problem without solving it. They say, "The only way to see my exam report is to login with my old account.". And because of forgetting password, i cannot do that.
I am about giving up. I think my ceritification and exam history will be lost only because of forgetting my OTN account's password. Maybe i should go to my old boss and try to convince him to startup the company again, to get my old email address and to see my Certview detail. It's like a joke :)
Bora Yuret
Edited by: user7218444 on Jan 8, 2013 4:50 AM

I wrote lots of mails to OTN help, Certview help, etc. They always close my problem without solving it. They say,
"The only way to see my exam report is to login with my old account.". And because of forgetting password, i cannot do that.Open an SR and provide the same information that you posted (presumably without the 'giving up' part):
http://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP
I know that it is possible for the support team to change your email address without having you the password because I have done it. When I first created my OTN account, I worked for Oracle. I left Oracle and it was a couple of years before I needed my the account again (OCP info wasn't as tied to the OTN id then as it is now). The support team was able to change my email to a new address for me. Mind you... I had them change it to one that is my personal email rather than my work email so that the problem would not happen again.

MS Certification Marks Split up

I have Cleared MS certification last year November : 2013. I did nt received the Test results. Now how should i retreive my marks Split up. I have logged into prometric and i did not get the transcript. Please let me know the process.

There is no way of obtaining a copy of your exam report as it is only produced on the day you sit your exam.
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Where is the oracle.prometric

i wrote the Oracle RAC 10g R2 exam in india hyderabad on the oracle.prometric web-center but while i am checking the web site to see my score i can not find the website maybe it's changed
with my regard

Read..
http://blogs.oracle.com/certification/2009/08/0134.html
Create a new web account in VUE/oracle . Register with your prometric ID.
If you want previous exam report.. feel free to contact
How can candidates get a copy of their Prometric score reports?
Copies of your score reports at Prometric will no longer be available after September 25, 2009, so if you >need a copy of your score report, you should request it from Prometric before that date. After September >25, 2009, you can request your exam score (not a full detailed score report) from >[email protected]
Reards
Azar
DBA
Edited by: Azar on Nov 22, 2009 1:26 AM

Link to contact Adobe Examination Support Team

Guys~
I become Adobe Certified Expert (Flex 3 with AIR) as on 22nd Aug 09 but till the date (Now it is almost 3 days) I haven't received any email from ADOBE about my exam. On exam report my Candidate Id is showing as pending. I tried a lot to get in touch with Adobe and Pearson Prometric Center but whenever I click on contact link on ADOBE web site, it redirects me to Product Support Link.
Could anybody help me?
With Best Regards,
Yogesh

Firstly, Thanks for your immediate reply BaBo!
Yes it is true that ADOBE will mail certificate to my home but as per my conversation with Prometric Center Authority, I must receive confirmation email from ADOBE regarding the exam report and candidate id.
Now I am bit confused.

My notes won't open on my ipad

I use my I-pad at school, and I use the included software 'notes' to save money on apps. Until now it was working fine, but now, when I click it. It starts loading by flicks back to the home screen. I need to get on it urgently as I have an exam report on it that I forgot to save onto my laptop that is 4 pages long and due next week. (3/3/14)
I've already tried resetting it, turning it off and downloading a new app, but none of those are working. I'm rather worried about it since this exam report is worth 3 credits in total
Any suggestions

First thing, you want to get your notes. Perform a Spotlight search (Command-space), and key the name of the note or its subject matter. You'll find it under Documents. You've not indicated that you use the Cloud, so I doubt you'll find it there.
Once, or if, you find the Note, save it to an app you can trust. Personally, Evernote is a robust, bug-free app that will serve you well.
If that doesn't answer your problem, I'm not sure what you mean by "it starts loading by flicks."

Certview Bug examing score reports

I was prompted to test Certview Score reporting this following reports of people with difficulties viewing core reports in certview. At around the time of this post i find the following either bugs or IMHO bad behaviours. I am using Chrome Version 23.0.1271.95 m from a Windows Vista PC at this time.
A am able to get to the Certview - exam history page entitled "Oracle University Exam History"
I see exams I have taken here under the oracle certification program under both prometric and Pearson Vue ( i don not see earlier exams taken under sun / MySQL before takeover; though I do see them on the certification page, this is all as I would expect).
So I have a table of exams as follows:
Test Start Date     Exam Number     Exam Title                      Grade Indicator     Score Report
17-MAR-10     1Z0-047             Oracle Database SQL Expert      PASS                     View
...[1]
When I click on the 'view' link for the score report on an old exam previously taken under oracle when prometric was the provider I get a pop up Tab page with the message:
"There are no registrations associated with your student information."
                      _OK_I can understand what is going on here, though the message is not informative.
[2]
When I click on view link for score report for the exam above (taken under pearson view) I get a background tab attempting to open with a 'Loading....' message on the tab title ... which goes 'untitled' for an instant and then disappears completely. That tab near reaches foreground and I remain on the exam history page.
[3] I haven't taken an exam for one taken after the new results regime introduced in november 2012 .... but other forum posters seem to have at least got some issues here. I seem to recall from blog links others were initially unsuccessful but later successful with recently taken exams.
I am concerned the update to this area may not have been fully tested, and may be pleased to recommend prize of extended visit to Australian Bushtucker trials with opportunity to develop and test escape software from tunnels full of bandicoots. Of course I am unfairly jesting ;-)
I personnally an not too bothered on this but others may be. I may raise an SR anyway and will leave the number here if I do. I understand it is the weekend, and that software updates take some time to develop and test.
.....

user10613194 wrote:
I have several certifications that I have completed from 2002, 2005 and most recently 2012. I am not able to view the results and get the same error mentioned above :
"There are no registrations associated with your student information."
OK
I don't think this is a browser related issue since I have tried this with Chrome, IE and Mozilla. Can anyone help with the solution to view my old results ?
Thank you,
ShashiFor the 2002 and 2005 examinations these will have been with a pre-pearson vue exam provider and the detailed exam results will not be available.
For the 2012 by best guess you ought to have had a Pearson Vue exam with results available, but their may be exceptions ( eg one thought is might happen if oracle testing ID's were merged). Suggest raise a specific service request with Oracle Certification to investigate. This is new so behaviours will be emerging ... however you have not hit a browser issue here as far as I can tell ).

I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate if you have any suggestions for thi

Hi,
I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate if you have any suggestions for this Certification Exam preparation materials from another 3rd party or from SAP directly . I would like to prepare or get trained well before taking the exam as I see it costs around $500.
Thanks in advance for your help in this regard!
Sincerely,
J

Please search here.. Training and Certification Shop for your desired certification or training. Don't forget to set your location.
Please use some summarized title for your query.

HELP:About the OCP exam with Oracle Reports??

Hello
Can i achieve OCP with SQL exam , PL / SQL exam and oracle 9i reports exam / xml publisher exam
I'm not intrested in giving an oracle forms exam.
I'm working as an oracle reports writer on oracle applications.
Kindly guide me in the right direction with appropriate oracle links etc.
Regards
Fahad Hameed.

You can achieve "PL/SQL Developer Certified Associate" by passing "Introduction to Oracle9i SQL 1Z0-007" OR "Introduction to Oracle: SQL and PL/SQL 1Z0-001" OR "Oracle Database SQL Expert 1Z0-047".
For "Oracle Forms Developer Certified Professional", you need to pass "Oracle Forms: Build Internet Applications 1Z0-141" after getting the "PL/SQL Developer Certified Associate" certificate.
Oracle PL/SQL and Oracle Forms Developer
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=155
Oracle Certification Program - Oracle Middleware
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=140

Reports work in Crystal Server XI, but not in XI Rel 2.

Hello All. 
We have recently migrated Crystal Reports Server from 11.0 to 11.5 (Release 2).
While most of the reports work okay, there are some that generate an error message when we try to run them from Infoview or the Central Management Console. They work okay on the old server, and in Developer XI:-
 
CrystalReportViewer 
Cannot determine the queries necessary to get data for this report. Failed to retrieve data from the database. Error in File C:\WINDOWS\TEMP\{D7C16401-7B2A-4A95-AAAF-B6C16BEE11A8}.rpt: Failed to retrieve data from the database.
ERROR: Cannot determine the queries necessary to get data for this report. Failed to retrieve data from the database. Error in File C:\WINDOWS\TEMP\{D7C16401-7B2A-4A95-AAAF-B6C16BEE11A8}.rpt: Failed to retrieve data from the database.
 
I've compared some of the reports, and the only difference I can see between them is, the number of Oracle SQL statements which are used. All the reports I've checked, that don't work; have five SQL statements. Also, when I chopped out a few fields that are used by the lookups, the report worked (this removes one the SQL statements).
 
Are there any changes that I need to make to web.config, machine.config or the Oracle driver settings?
 
I've tried searching the forums, but cannot find the same sort of problem. (Originally, a lot of the reports were not working, but after checking the forums, I was able to change a timeout in web.config, so that was very helpful, thanks).
 
Thanks for looking. I'd be really grateful for any help.
 
Report doesn't work 
SELECT "STMAOS_Course"."ACAD_PERIOD", "STMAOS_Course"."AOS_CODE", "STMAOS_Course"."AOS_PERIOD", "STMAOS_Course"."STAGE_IND", "STCSTATD"."FULL_DESC", "STCSTATD"."AOS_TYPE", "STMAOS_Course"."STAGE_CODE", "STMAOS_Course"."ATTEND_MODE", "STCSTATD"."DEPT_CODE", "STACREDT"."APL_CREDITS", "STCSTATD"."AOS_CODE", "STMAOS_Course"."STUDENT_ID"
FROM ("QLSDBA"."STMAOS" "STMAOS_Course" LEFT OUTER JOIN "QLSDBA"."STACREDT" "STACREDT" ON ((("STMAOS_Course"."ACAD_PERIOD"="STACREDT"."ACAD_PERIOD") AND ("STMAOS_Course"."AOS_CODE"="STACREDT"."AOS_CODE")) AND ("STMAOS_Course"."AOS_PERIOD"="STACREDT"."AOS_PERIOD")) AND ("STMAOS_Course"."STUDENT_ID"="STACREDT"."STUDENT_ID")) INNER JOIN "QLSDBA"."STCSTATD" "STCSTATD" ON "STMAOS_Course"."AOS_CODE"="STCSTATD"."AOS_CODE"
WHERE "STMAOS_Course"."ACAD_PERIOD"='09/10' AND "STMAOS_Course"."STAGE_IND"='E' AND "STCSTATD"."AOS_TYPE"='C' AND ("STMAOS_Course"."STAGE_CODE"='E1RF' OR "STMAOS_Course"."STAGE_CODE"='EXAM' OR "STMAOS_Course"."STAGE_CODE"='FULL' OR "STMAOS_Course"."STAGE_CODE"='FULL2' OR "STMAOS_Course"."STAGE_CODE"='FULL3' OR "STMAOS_Course"."STAGE_CODE"='FULLE' OR "STMAOS_Course"."STAGE_CODE"='FULLR' OR "STMAOS_Course"."STAGE_CODE"='PROV') AND "STMAOS_Course"."ATTEND_MODE"='02' AND "STCSTATD"."DEPT_CODE"='A'
ORDER BY "STMAOS_Course"."ACAD_PERIOD", "STMAOS_Course"."AOS_CODE", "STMAOS_Course"."AOS_PERIOD"
 
select * from qlsdba.STSCMC10
where mapping_id = '22007042'
 SELECT "STMBIOGR"."STUDENT_ID", "STMBIOGR"."FORENAME", "STMBIOGR"."SURNAME", "STFSTFEE"."TOTAL_FEE", "STMENDET"."DDL_FIELD2", "STMENDET"."AOS_PERIOD", "STMENDET"."AOS_CODE", "STMENDET"."ACAD_PERIOD", "STMENDET"."STUDENT_ID"
FROM "QLSDBA"."STMBIOGR" "STMBIOGR" CROSS JOIN ("QLSDBA"."STMENDET" "STMENDET" LEFT OUTER JOIN "QLSDBA"."STFSTFEE" "STFSTFEE" ON ((("STMENDET"."ACAD_PERIOD"="STFSTFEE"."ACAD_PERIOD") AND ("STMENDET"."STUDENT_ID"="STFSTFEE"."STUDENT_ID")) AND ("STMENDET"."AOS_CODE"="STFSTFEE"."AOS_CODE")) AND ("STMENDET"."AOS_PERIOD"="STFSTFEE"."AOS_PERIOD"))
ORDER BY "STMBIOGR"."STUDENT_ID"
 
select * from QLDBA.CMPGENCD
where mod_id = 'SAS'
and category_id = 'DDL_FIELD2'
 
SELECT "STCSTDET"."COLL_SGEN2", "STCSTDET"."AOS_CODE"
FROM "QLSDBA"."STCSTDET" "STCSTDET"
WHERE "STCSTDET"."COLL_SGEN2"='U'
 
Report Works okay 
SELECT "STMAOS_Module"."AOS_CODE", "STMAOS_Course"."ACAD_PERIOD", "STMAOS_Course"."AOS_CODE", "STMAOS_Course"."AOS_PERIOD", "STMAOS_Course"."STAGE_IND", "STCSTATD"."FULL_DESC", "STCSTATD"."DEPT_CODE", "STCSTATD"."AOS_TYPE", "STMAOS_Module"."STAGE_CODE", "STMAOS_Course"."STAGE_CODE", "STMAOS_Course"."ATTEND_MODE", "STACREDT"."APL_CREDITS", "STMAOS_Module"."STUDENT_ID", "STMAOS_Module"."ACAD_PERIOD", "STMAOS_Module"."AOS_PERIOD", "STCSTATD"."AOS_CODE"
FROM (("QLSDBA"."STMAOS" "STMAOS_Course" LEFT OUTER JOIN "QLSDBA"."STACREDT" "STACREDT" ON ((("STMAOS_Course"."ACAD_PERIOD"="STACREDT"."ACAD_PERIOD") AND ("STMAOS_Course"."AOS_CODE"="STACREDT"."AOS_CODE")) AND ("STMAOS_Course"."AOS_PERIOD"="STACREDT"."AOS_PERIOD")) AND ("STMAOS_Course"."STUDENT_ID"="STACREDT"."STUDENT_ID")) INNER JOIN "QLSDBA"."STMAOS" "STMAOS_Module" ON ((("STMAOS_Course"."STUDENT_ID"="STMAOS_Module"."STUDENT_ID") AND ("STMAOS_Course"."ACAD_PERIOD"="STMAOS_Module"."ACAD_PERIOD")) AND ("STMAOS_Course"."AOS_CODE"="STMAOS_Module"."RAOSCD_LINK")) AND ("STMAOS_Course"."AOS_PERIOD"="STMAOS_Module"."RPROCD_LINK")) INNER JOIN "QLSDBA"."STCSTATD" "STCSTATD" ON "STMAOS_Course"."AOS_CODE"="STCSTATD"."AOS_CODE"
WHERE "STMAOS_Course"."ACAD_PERIOD"='09/10' AND "STMAOS_Course"."STAGE_IND"='E' AND "STCSTATD"."AOS_TYPE"='C' AND ("STMAOS_Module"."STAGE_CODE"='E1RF' OR "STMAOS_Module"."STAGE_CODE"='EXAM' OR "STMAOS_Module"."STAGE_CODE"='FULL' OR "STMAOS_Module"."STAGE_CODE"='FULL2' OR "STMAOS_Module"."STAGE_CODE"='FULL3' OR "STMAOS_Module"."STAGE_CODE"='FULLE' OR "STMAOS_Module"."STAGE_CODE"='FULLR' OR "STMAOS_Module"."STAGE_CODE"='PEND' OR "STMAOS_Module"."STAGE_CODE"='PROV' OR "STMAOS_Module"."STAGE_CODE"='RECS') AND ("STMAOS_Course"."STAGE_CODE"='E1RF' OR "STMAOS_Course"."STAGE_CODE"='EXAM' OR "STMAOS_Course"."STAGE_CODE"='FULL' OR "STMAOS_Course"."STAGE_CODE"='FULL2' OR "STMAOS_Course"."STAGE_CODE"='FULL3' OR "STMAOS_Course"."STAGE_CODE"='FULLE' OR "STMAOS_Course"."STAGE_CODE"='FULLR' OR "STMAOS_Course"."STAGE_CODE"='PROV') AND "STCSTATD"."DEPT_CODE"='A' AND "STMAOS_Course"."ATTEND_MODE"<>'01'
ORDER BY "STMAOS_Course"."ACAD_PERIOD", "STMAOS_Course"."AOS_CODE", "STMAOS_Course"."AOS_PERIOD"
 
select * from qlsdba.STSCMC10
where mapping_id = '22007042'
 SELECT "STMBIOGR"."STUDENT_ID", "STMBIOGR"."FORENAME", "STMBIOGR"."SURNAME", "STCASDET"."CREDIT_NUM", "STCSESSD"."AOS_TYPE", "STCSTDET"."COLL_SGEN2", "STRDEPRT"."DESCRIPTION", "STCSTDET"."AOS_CODE", "STRDEPRT"."DEPT_CODE", "STCASDET"."AOS_PERIOD", "STCASDET"."AOS_CODE", "STCASDET"."ACAD_PERIOD", "STCSESSD"."AOS_PERIOD", "STCSESSD"."ACAD_PERIOD", "STCSESSD"."AOS_CODE"
FROM ((("QLSDBA"."STCSTDET" "STCSTDET" CROSS JOIN "QLSDBA"."STRDEPRT" "STRDEPRT") CROSS JOIN "QLSDBA"."STCASDET" "STCASDET") CROSS JOIN "QLSDBA"."STCSESSD" "STCSESSD") CROSS JOIN "QLSDBA"."STMBIOGR" "STMBIOGR"
WHERE "STCSESSD"."AOS_TYPE"='M' AND "STCSTDET"."COLL_SGEN2"='U'
ORDER BY "STMBIOGR"."STUDENT_ID"
 

Post Author: Argan
CA Forum: .NET
Honestly I have never used the server explorer for anything, so I am not sure what is needed for that to work.
You need to install the Enterprise SDK on your dev box.
Do a custom server install on your dev machine, unchecking everything except for the .NET SDK and Help files.

CP6 internal server reporting modifications - Post Results - Continue button

I have searched the forum for similar issues, and have posed one or two questions, but I am struggling to get a clear direction as to how to post quiz results to an internal server automatically (including user variables), without the name/email dialog screen appearing. In addtion, to CLOSE the browser, on the Quiz Results slide,I have tried multiple options with the continue button, including a javascript command of:
top.window.close();
(courtesy of Colday213)
But this did not work for me when I tried to enter the script into the quiz preferences area (can't directly edit the continue button on the quiz results slide).
I have already been posting practice results to my website using the standard INTERNAL SERVER reporting method.
BUT --- here is my wish list --- to modify the process
1. Capture user variables (First name, Last name, student ID and student number) and post them with the quiz results. I have a slide setup to to do this.
2. Post results AUTOMATICALLY to the internal server without showing the Quiz Results slide at all.
3. Have the quiz exit the browser completely once the quiz has been taken.
My quiz results slide has TWO renamed buttons: SEND EXAM (Post results) and EXIT (Continue). My preferences on either pass or fail are "Continue". I have even made the "score" tiny font, and invisible (black text on black background), so the reults page shows (and which I wish did not appear).
Perhaps only a LMS is the method to allow the above, but I may not have an LMS option --- hence, the internal server method..

I will investigate the google spreadsheet option as that may solve the first two issues.
Regarding the last item, EXITING the quiz (closing the browser) --- since the user gets to an ending slide that asks them if they are satisfied with their user variables entered at the start, perhaps I can program the javascript "exit" command on that slide, once the use varifies the data is correct? Currently, a "continue" button appears after user data is verified, and then the button advances to the RESULTS slide, so that the resuls can be posted, which invokes the standard name/email dialog.
If the widget posts the quz results to the google spreadsheet after the last question has bee answered, then I can either HIDE (skip) the results slide, or choose "don't show" (uncheck) the quiz results box in the preferences, and have the verification slide appear. Then, I just need to make the browser close from there (probably with a button).
I will experiment with this option.
I was also wondering if I can edit the PHP file that collects the quiz results to include the user variables?

SRW.DOSQL NOT WORKING IN REPORTS 11G

Hi Experts
I have certain coding in my report which makes use of SRW.DOSQL and the queries are written in reports 11g.
Kindly let me know the alternative in reports 11g as the opening balance field is not bringing the value as attached in the report.
I am attaching the rdf file for reference.
Kindly let us know the solution for the same.
Regards

Your not seeing the built in package for some reason.
Maybe they are missing on your Linux machine.
Reinstall reports there? Examing your environment variables?
Is that rwrun.jar anywhere?

SRW package not working in Reports 10g (9.0.4)

Dear All,
I am using reports services 10g (9.0.4) for RHEL o/s.we are using SRW pkg in our reports heavily.But when we compile reports in Linux it is showing errors like SRW.message ,SRW.set_field_char,SRW.set_format_mask must be declared.
Though these functions are well written in reports help,it is not at all supporting these functions.
What is solution for this for successfull compilation of reports??
Regards-
Onkar Vidwans
INDIA

Your not seeing the built in package for some reason.
Maybe they are missing on your Linux machine.
Reinstall reports there? Examing your environment variables?
Is that rwrun.jar anywhere?

Exam Reporting

Similar Messages

Maybe you are looking for