Example for Functional Area Master Data in Private Company

Hi Expert
From my ERP experience with the State Enterprises, there are obvious dimensions to segregate the Functional Area Master Data of each Fund.
Such as the School Business, sometime they use Functional Area to divide the fund to use with Education Activity, Research Activity and Other Social Services Activity. This dimension oftenly have the direction from the government to be divided.
Could you please advice for example of Functional Area Master Data to be applied with the Private Company? I need to provide more example for my client to apply the Functional Area to use with, due to they are the independent firm that would like to use Functional Area.
Rgds,
Ton

Hi,
In private sector you might have similar segregation. For example, I was involved in the project where functional area was used to distinguish R&D expenses from operational expenses on the same fund. I.e. if you can always look at this as additional dimension in your budget management framework, if other dimensions are not sufficient for the efficient reporting. However, you should also bear in mind, that functtional area has other functions (sorry for tautology) which lie more in financial and not budgetary domain.
Regards,
Eli

Similar Messages

  • User-Exit or Badi for dangerous goods - master data

    Is there any user-exit or BADI    we can use while changing or saving dangerous goods?
    We want to do a copy on other dangerous goods immediately after the change or creation of the dangerous goods master data.
    But I can't find an user-exit which can be used before the changes are saved.
    Can anybody help?
    Thanks!

    Hi,
    Please check SAP enhancement DG100001
    You can use this SAP enhancement to define a customer exit to write change documents for dangerous goods master data and packaging data.
    The customer exit is in the function group XD10. It is called from the function DG10_CHANGE_DOC_USER_EXIT.
    If the system does not find a customer exit, a standard document description is called. This is stored in the include LDG1NU03
    Hope this will solve your problem
    Regards,
    Keshav

  • Open hub destination of text and attribute for Functional Area

    Hi Expert
    I have a requirement to accommodate both attribute ( 0FUNCT_LOC_ATTR)  and text ( 0FUNCT_LOC_TEXT ) for functional area in open hub destination .For this a DSO has been created from both 0FUNCT_LOC_ATTR, 0FUNCT_LOC_TEXT data sources .Problem is that DSO has 0FUNCT_AREA ( Functional Area ) as only key fields . So text for both english ( EN ) and Dutch ( NL) for particular 0FUNCT_AREA not getting loaded .If we assign both 0LANGU and 0FUNCT_AREA as composite key of dso , data from attribute transformation is loaded as blank as there is no language filed in attribute data source ( 0FUNCT_LOC_ATTR ).   Please let me know how can I design to accommodate both text for different language and functional area for open hub destination  .
    I know that I can create separate open hub destination for master data TEXT and Attribute.
    Any help is highly appreciated.
    Regards
    Saikat

    HI Saikat,
    You can create an additional characteristics counter and make it a key field in the DSO.After that we can populate this characteristics in the end routine .It value would increase by 1 everytime  different text comes for the same functional area.
    Sample code
    data: counter type n,
             w_farea type /bio/oifunc_area.
    Sort result_package by func_area.
    count =0.
    *checking whether we have the same functional area or we have a different functional area.
    Loop at result_package assigning <Result_fields>.
    if w_farea is initial or w_farea = <result_fields>-func_area.
    count = count +1.
    else
    count =1.
    endif.
    w_farea= <result_fields>-func_area.
    <Result_fields>-zcount = count.
    ENDLOOP.
    Clear w_farea.
    This way the value of counter would get increased by one everytime a new text comes for the same functional area.We can have any number of texts for the same functional area by this method.
    The only issue would be when some delta update comes for the existing text in this method.If you are doing a full load to the DSO from the datasource, then there would be no issue with this method.

  • Audit trails for ammendments to master data

    Hi dear all SAPians
    My client ask :   to recommend maintaining audit trails for ammendments to master data>
    what is its meaning and what is its purpose >
    your ans will be highly appreciable by heart and point>
    M Swadhin

    Hi,
    You can find SAP audit toolbox via transaction SECR.
    Audit logs may have following meaning:
    The Security Audit Log is a tool designed for auditors who need to take a detailed look at what occurs in the SAP System. By activating the audit log, you keep a record of those activities you consider relevant for auditing. You can then access this information for evaluation in the form of an audit analysis report.
    The audit log's main objective is to record:
    u2022 Security-related changes to the SAP System environment (for example, changes to user master records)
    u2022 Information that provides a higher level of transparency (for example, successful and unsuccessful logon attempts)
    u2022 Information that enables the reconstruction of a series of events (for example, successful or unsuccessful transaction starts)
    Specifically, you can record the following information in the Security Audit Log:
    u2022 Successful and unsuccessful dialog logon attempts
    u2022 Successful and unsuccessful RFC logon attempts
    u2022 RFC calls to function modules
    u2022 Successful and unsuccessful transaction starts
    u2022 Successful and unsuccessful report starts
    u2022 Changes to user master records
    u2022 Changes to the audit configuration
    You can find more details here: http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTADM/BCCSTSAL.pdf
    Cheers

  • Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

    Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

    Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it. 
    Alex D
    Applications Engineer
    National Instruments

  • Repository A2 is already used for document area DATAARCH (Data Archiving].

    Dear ALL,
    Actually I am getting probelem Photo configuration in back end.
    I am using Transaction SM31 maitaining the table TOAAR_C, here I am getting probelem  'Content Repository Identification' (A2), here i am getting below error.
    Repository A2 is already used for document area DATAARCH (Data Archiving].
    Please look in to issue.
    Regards,
    venkat

    Jürgen - your answer was very helpful and I'm sure I'm now in the right direction!
    However I still have an issue:
    When the write job is finished and before deleting and storage, the archive file is not accessible - and then I am not able to continue with deletion and storage.
    An example:
    Filename: RMM_EKKO11180104855_CLL
    Logical path: ARCHIVE_GLOBAL_PATH_WITH_ARCHIVE_LINK
    Physical file name: E:SAPContRepZ5RMM_EKKO11180104855_CLL
    E:SAPContRepZ5 is the root of the content repository and should according to the documentation contain the file during the delete phase and until final storage in the repository. But there is no file there.
    In the log of the write job there are the following entries:
    Job started
    Step 001 started (program RM06EW70, variant Z_DEMO_7, user ID CLL)
    Reading purchasing documents
    Archiving session 000913 is being created
    Path:
    Name for new archive file: RMM_EKKO11180104855_CLL
    1 of 1 purchasing documents processed
    Job finished
    I am a little concern about that no path is written to the job log - could maybe mean something.
    Any ideas?
    Thanks,
    Claus.

  • BTE's used for project systems master data.

    Hi ,
    Can anyone tell me what are the BTE's used for project systems master data.
    Tcode used are CJ01,  Cj02,  CJ20N,  CJ12,  CNMASS
    When master data is changed or created BTE should trigger.
    Regards
    Subin

    I don't think there are any open_fi BTE available for PS master data.
    you can use classic subs/vals using GGB0 and GGB1 transaction codes.

  • G/L Account - Field for Functional Area in IDoc?

    I'm experimenting with creating G/L Account data outside of SAP using IDoc's (GLMAS01).  However, I'm having trouble finding a field in that IDoc for the Functional Area of the account.  Is anyone familiar with this IDoc, and know whether or not there is a standard field for "Functional Area" or if I have to extend the IDoc?

    Have you tried the field FUNC_AREA on segment E1SKA1M?
    You could use WE60 to display the definition of GLMAST01 Idoc and look for the fields and segments on the document.
    Hope this helps.
    Regards.

  • How to find business content explaination for SD, MM master data

    Dear Expert,
           It might be stupid question:
           when I following BI Content help linkage: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm , I only can see transaction BI content data source. But I'm also wanna see the master data BI content data source explaination, e.g. 0CUST_SALES_ATTR, 0Material_Attr, 0Vendor_Attr.
          For example, I wanna check master data BI content data source: 0CUST_SALES_ATTR,   I goto BI content help page -- > Customer Relationship Management --> ERP Analytics --> Enterprise Sales and Distribution --> DataSources
          There is only transaction data source available.
    Anyone can help me, thanks in advance.

    Hi Jie,
    Please check these links for SD,MM business content.
    http://help.sap.com/saphelp_nw70/helpdata/en/90/d4f33b949b6b31e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/c5/bbe737a294946fe10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
    Regards,

  • Dual Control for Vendor/Customer Master Data

    We can set Dual Control for Vendor/Customer Master Data. I have set it. According to the cycle, I have customized sensitive field, and make changes in Vendor/Customer A/c. Here the changes will be confirmed by other user who is authorised to confirm the changes. In this scenario, I would like to know, can we avoid this confirmation once we have actived? If, no than how could we confirm the changes and where can we set authorisation?

    Dear,
    No, You cannot avoid the dual check if You activate it. Another user by FK08 has to confirm the changes.
    Then You can delete the field for the dual control into the table T055F and no check will be done in the future.
    I hope this helps.
    Mauri

  • Sustitution for Functional Area in CO

    Hi,
    I have defined a substitution step for functional area. When I run activity allocation I receive a messge (KI176) that the functional area has been changed. Despite this, when I review the final document, the functional area is the standard pre-substitution one.
    General explanation - the original functional area is derived from the sender cost cented. I am changing it to a different one.
    Please advice,
    Avihay Efrati

    Never mind. We managed somehow to figure it out ourselves.

  • IDOC for Functional Areas

    Hi,
    I am looking for some IDOC for the creation of Functional Areas.
    Transaction :  FM_FUNCTION
    Table : TFKB
    I have not find any yet, do you know how can i fine the IDOC or maybe it does not exist any IDOC for Functional Areas?
    Thank you,
    Regards,
    Zheng

    As far as I know, there is no standard IDoc for it. However, to give you a pointer, you can look at FM FM_FUNC_AREA_CREATE or BUS0023 (Functional Area).
    Thanks & regards,
    Hadiman

  • Give me some examples for functions for read POST, write POST, modify POST

    Give me some examples for functions for read POST, write POST, modify POST, create and delete theme in forum. This functions have to be make like Remote Methods

    Give me some examples for functions for read POST, write POST, modify POST, create and delete theme in forum. This functions have to be make like Remote Methods

  • LSMW for GL account Master data

    Hi all,
    I have to create one lsmw tool in GL ACCOUNT master data.
    Please suggest me which method i should adopt.
    direct input, BAPI , Recording OR IDOC.
    IF bapi or recording, please tell me BAPI or transaction for GL account master data.
    Reagrds,
    Ruchika

    Hi Ruchika,
    BAPI_ACC_GL_POSTING_POST caters to your requirement.
    Regards,
    Younus
    <b>Reward Helpful Answers:-)</b>

  • Which t.cod to copy in a massive manner the G/L Master data from a Company?

    Hi All,
    could anyone show me the customizing transaction to copy in a massive manner the G/L Master data from a Company code to another?
    Thanks
    Moderator: Please, search before posting

    Hi Rossi,
    You can do this through transaction code OB_GLACC01. Please check it and let us know if you run into any issues.
    For more information check the following area.
    SPRO-GL ACCOUNTING-GL ACCOUNTS-MASTER DATA-PREPARATION-GL ACCOUNT CREATION AND PROCESSING-CHANGE GL ACCOUNTS COLLECTIVELY.
    Warm regards,
    Murukan Arunachalam
    Edited by: Murukan_A on Jan 23, 2012 8:47 PM

Maybe you are looking for