Examples, exercises & solutions

Hi,
I'm getting started with Visual Composer and have already been through some exercises (Exercise1_CreatingBankInformationiView Basis Mode, Exercise2_EnhancingBankInformationiView, Exercise3_Creating a Guided procedure forBankInformation, Exercise4_Creating a Popup iview, Exercise5_Eventing, Exercise6_Nested iViews, Exercise7_Visibility & Guard Conditions).
If someone could give my some links to other exercises or tutorials, that would just be great! For instance about all the graphical possibilities in VC, more complexity in function modules, BAPIs etc.
thanks in advance,
Tom

Hi tom
few links....
high lighting rows in table
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c4e2ff87-0d01-0010-9db5-d1581fc1dfbe
Consuming a web service using VC
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e017128b-0c01-0010-fa85-e3a576f1a40d
Consuming Web Services Using Visual Composer [original link is broken]
/people/baris.buyuktanir2/blog/2007/07/30/how-to-create-a-visual-composer-user-selection-screen-with-ume-web-service-part-i
Regards
Pradeep

Similar Messages

How to Install/Access HANA Academy Workshop Exercise Solutions and Templates

In Thomas Jung's HANA Academy tutorial on "Native Development Workshop", solutions and templates are cited in the "Simple "Hello World"" video...
HANA Academy - HANA Native Development Workshop: Simple &quot;Hello World&quot; - YouTube
Where are there intructions on where to access and/or how to install/import these workshop resources?
Thank you.

Thanks Thomas.
I've been provided with a departmental, on-premise instance for the purposes of demo and educational sandbox, so will not be using a Developer Edition via one of the cloud providers.
I'm searching for a tutorial path that has kept prerequisite configuration to a minimum.
At first glance, your native HANA development HANA Academy series seems to fit that bill.
In that these are the first hours of my exposure to HANA, I'd love to be able to keep pace with your videos step-by-step. I'd prefer to use the solutions and templates that you begin to use in the second video (Hello World) of that series. As a noob, avoiding the translation from the SHINE doc would preserve my train of thought and prevent me from going into the weeds by taking missteps due to the translation.
Is there a way to access the solutions/templates depicted in your video series other than having to install/use/access Developer Edition?
...or is there another, more recent video tutorial with a close matching set of solutions/templates that you would recommend?
Thank you.

Can't run example JSF solutions

I just installed Studio Enterprise and tried to run the sample project called "tabbed-view". This example shows three diffrent ways to show a "tabbed" screen. Two of them work, the one using JSP (server pages) and the one using Tag Files. But the one using JavaServer Faces returns the following error:
exception:
javax.servlet.ServletException: Servlet.init() for servlet Faces Servlet threw exception
root cause:
java.lang.NullPointerException
javax.faces.webapp.FacesServlet.init(FacesServlet.java:144)
Does anybody have an idea why?
Thanks

Maybe a JSF forum is a better place to ask - http://forum.java.sun.com/forum.jspa?forumID=427
There are some similar threads (I haven't gone into details with them, however):
http://forum.java.sun.com/thread.jspa?threadID=598929
http://forum.java.sun.com/thread.jspa?threadID=501578

How to call other pages in the same solution in the PDK. NET

I have a solution within Visual Studio that has two pages and two components "ascx", a component is updated and the other is for display only. I am not able to draw page 2, because the response.redirect does not work right on the Portal.
Does anyone have any tips, examples or solutions to my problem?
Thank des of now the collaboration of all.

hello, this is a preference in your google search settings. go to google.com/preferences and disable the option to ''Open search results in a new browser window''.
https://support.google.com/websearch/answer/425

PL/SQL Exercises with answers

Hi All,
I am preparing a presentation for my team on PL/SQL basics and on this I need example Exercises on PL/SQL basics. If you can refer to such links then it would be
great help!!!!!!!!!!

See if this link helps - http://www.oracle.com/technology/tech/pl_sql/index.html
HTH
Srini

Is it possible to connect a DEV System to more than one SAP Solution Manage

Hello,
My system DEV is already connected to a first SAP Solution Manager, I would also like to reconnect the same system so that it communicates and will be monitored by a second SolMan.
Is it possible to do so and the do the operation involve any risks ?
Thanks for your help
Regards
Ben

Hello,
This is possible in many scenarios. Often this is done to distribute load, for example on Solution Manager will do the Service Desk Function, one may do ChaRM, one may be doing Monitoring & Reporting, one may be doing Diagnostics.
In these cases a managed ssytem can be connected to many Solution Manager systems.
However as Mateus has pointed out, you cannot connect one managed to two Solution Managers and do SMD on both Solution
Manager systems, but you can have more than one Solution Manager doing Diagnostics.
Even in the case of EWA, while you can connect a Managed system to multiple Solution Manager systems and have then generate a report, one of the Solution Manager systems must be defined as the Master.
So the specific scenario may place some restrictions on connecting a managed system to more than one Solution Manager,
but for most instances it can be done.
Regards,
Paul

SAP SOLUTION ARCHITECT

Hi Freinds,
I would like to know what is role of SAP SOLUTION ARCHITECT.
Now days I see so many advertises asking for Solution Architect SAP. Is this term used for Sap solution consultant. I would like to know the responsibilities for solution architect.
With Best Regards,
Rajesh

Easy question to answer if you google the phrase. There are so many job posting descriptions. Do a simple search and answer your own question easily. Here is an example: ["SAP Solution Architect"|http://www.tech-centric.net/it-jobs/SAP-Solution-Architect_436345]

MM - ECC 6.0 Certification

Hi All,
I want to go for Certification in MM - ECC 6.0. So please tell me tips and If you have any sample or certification questions please send me to '[email protected]'
Points will be rewarded
Thanks,
Naveen

Hi,
The MM exam:
1) The examination questions are grouped together on topic-wise and evaluated accordingly. You can see at the beginning of the first book some plus marks against each topic. So don't treat the questions as 57 right answers out of 80. For example from "solution manager" two or three questions will be there but it is a topic i.e. if you answer all the questions out of it you will get 100% in that topic. All the topics are evaluated separately and the overall is taken as the final result. Check with your tutor or someone for more awareness.
2) Decimal marks will be there and marks will be given proportionately for the questions you attend. No negative marks.
3) For single answer type, there will be only radio buttons so that you can select only one.
4) For multiple answer (where more than one answer is correct) type, against each statement (answer) there will be two buttons for true and false so that you can (have to) select one.
5) Read and be familiar with the books as much as possible. Group discussions will be very much useful.
6) Once you attend th exam, you will find it easier than you expected.
Prepare well, be relaxed, best of luck.
The Do and Don't
Don't look for dumps as you will find none in whole world .Go by each word , sentences and get familiar of all the screen that comes while doing excercise.
SAP certification is not like microsfot or CISCO certifications where one can easily get the dumps.
You need to complete the chapter end exercises thoroughly at least you expect 7 - 10 questions in your certification exams .
Purchasing II books carries 30 questions in certification.
Read all the 4 books at least 4-6 times at least not less then that .
Don't concentrate much on week end exams.
Don't loose patience as you will tend to feel that you don't know anything as exam dates get closer, feel free and relax and sleep at least for 10 hours before exam .
pls go through this link also:
http://www.sap-img.com/mm015.htm
All the very best.
Reward if useful
Chandru
Message was edited by:
CHANDRAMOHAN NATARAJAN
Message was edited by:
CHANDRAMOHAN NATARAJAN

Sdo_buffer question

I am hoping that someone can help me. I know this is a super easy fix. I am looking to creat a buffer around one xy coord. Am I on the right tract.
select sdo_geom.sdo_buffer(MDSYS.SDO_GEOMETRY(2001,8307,MDSYS.SDO_POINT_TYPE(2560808.6,387514.844,0),NULL,NULL), m.diminfo,100,.0005)
from tractblockpoint2000 t, user_sdo_geom_metadata m
select sdo_geom.sdo_buffer(MDSYS.SDO_GEOMETRY(2001,8307,MDSYS.SDO_POINT_TYPE(2560808.6,387514.844,0)
ERROR at line 1:
ORA-13205: internal error while parsing spatial parameters
ORA-06512: at "MDSYS.SDO_3GL", line 439
ORA-06512: at "MDSYS.SDO_GEOM", line 3065

The answer is yes. It is easy to buffer a point.
There are more questions to ask and answer here, though, because your data is not valid.
your sdo_gtype = 2301: this is not allowed. If I was to guess from looking at your data, I would guess you want 2001.
your sdo_srid = 8307: this is fine if your coordinates are between -180 and 180 in longitude (x), and -90 to 90 in latitude (y). Your data is not in this range.
if I was writing this, i would use the sdo_point_type instead of sdo_elem_info_array and sdo_ordinate array.
A two-d point in the sdo_ordinate_array should only have 2 ordinates (x and y, not x,y,null) - if stored in the sdo_point_type, then you need x, y, and null.
you don't need a select ... from dual to buffer the geometry, you can call the function in the operator.
Arc tolerance of 1/2 meter (0.5) is very fine - you will get a geometry with lots of vertices, and it may take a long time to get results. Below is an example of your query, rewritten, with a 10 meter tolerance. That said, further below is the same query written as sdo_within_distance, which includes an implicit, highly accurate buffer operation and an anyinteract.
Note since these queries are in a geodetic coordinate system and you didn't specify units, the default is meters.
The rewritten queries use the geod_cities table which is downloadable from OTN ( http://otn.oracle.com/products/spatial ), click on training on the right, then exercise solutions.
Your query rewritten:
select city
from geod_cities t
where sdo_relate(t.location, sdo_geom.sdo_buffer( mdsys.SDO_GEOMETRY(2001,8307, sdo_point_type(-75.13,40,NULL),null,null), 1000, 0.05, 'arc_tolerance=10'), 'mask = anyinteract querytype=window') = 'TRUE';
But best done using sdo_within_distance:
select city
from geod_cities t
where sdo_within_distance(t.location, mdsys.SDO_GEOMETRY(2001,8307, sdo_point_type(-75.13,40,NULL),null,null), 'distance=1000') = 'TRUE';

Create and use templates

Hi, experts,
When i created a document from a template,why i can't find the template( which i have created and activated in the system configuration) in the selection?
Thanks!

Hi sandy,
follow these steps
Check and Configure the
Template Service
Task:
Check the template service is activated and define the location of templates and
template groups.
1. Log on as EP300.A-## to check that the template service is running and
define the location of the template groups and templates.
a) In the top level navigation, choose System Administration → System
Configuration and navigate to Knowledge Management → Content
Management → Global Services → Template Service. If Template
Service is invisible in Global Services, choose Mode → Advanced.
b) Ensure that in Template Service, the Active box is checked. Note
the paths for the template groups and templates. The default path
is/documents/Templates.
c) Choose Show Advanced Options if the Active box is missing.
2. Create the folders that have been defined in the configuration for templates
and template groups.
a) Choose Content Administration → KM Content → documents.
b) Choose Folder → New → Folder.
c) Enter the name Templates and choose Save.
d) Open this folder and create a new folder for the templates. The folder
must have the same name as that defined in the configuration, so use
SingleTemplates.
e) Create now a folder for the template groups in folder Templates. The
folder name must be the name defined in the configuration, so use
TemplateGroups.
Create and Use Single
Templates
Task:
Upload documents that will be used as templates. Activate these templates for a
specific folder and create new documents based on these templates.
1. Upload the documents Exercise.doc, Solution.doc, and Unit.ppt from
\Courses\EP300 62\Exercises\Template Service on the training share to the
folder SingleTemplates.
a) Choose Content Administration → KM Content and navigate
todocuments/Templates/SingleTemplates.
b) In the SingleTemplates folder, choose Folder → New → Upload.
c) Choose Browse to locate the file in \Courses\EP300
62\Exercises\Template Service, for example, Exercise.doc, and choose
Open.
d) Choose Upload and repeat these steps for the other documents.
e) When all the templates have been uploaded, choose Done.
2. Activate the templates Exercise.doc, Solution.doc, and Unit.ppt for the
documents## folder.
a) Locate the documents## folder. Navigate to the folder by choosing
Content Administration → KM Content and select documents/Public
Documents/documents##.
b) Click on the context menu for documents## and choose Details →
Settings → Templates.
c) Select all the templates (select the checkboxes) and choose Save and
then Close.
3. Create new documents in the documents## folder based on these templates.
a) Within the documents## folder, choose Folder → New → From
Template and choose a template. Because the templates have been
activated only in this folder, the template selection is also only available
for this folder.
b) Enter a name and choose Save.
award me points if it helpful

How do I use a CNiDAQmxTask with multiple channels?

My last project from three years ago utilized Visual Studio 6.0. I am now using VS 2005.and created a "NI MFC DAQmx DLL".
I used the wizard to create a CNiDAQmxTask class called CDAQmx1124VOutTask for the 1124 card. The class now contains six different voltage channels in the Configure function. How do I write to a single channel?
Boy, C++ examples for solutions using the DAQmx Assistent are non-existent. All I find are C# examples, or native DAQmx funtions.
The best I have been able to come up with is this that will compile.
CDAQmx1124VOutTask m_1124VOut;
m_1124VOut.Start();
CNiDAQmxAnalogSingleChannelWriter* writer = new CNiDAQmxAnalogSingleChannelWriter(m_1124VOut.Stream);
writer->WriteSingleSample(TRUE, 12.);
delete writer;
Which output on the card will end up writing the 12 volts? Do I need to have the DAQmx Assistant create a new CNiDAQmxTask
for each output on the card? Any help or example links would be greatly appreciated.
TIA
Eric

Hello Eric,
The question of which output on the 1124 card will write the 12 volts depends on how you configured the DAQmx Task. If you specified all six channels, then you would need to create an array of data that is 6 elements in length. The first element in that array would be written to AO channel 0. The second element in the data array would be written to AO channel 1, and so on. So this answers the question about needing to create separate tasks for each individual channel. It would suffice to specify all of the physical channels in one task, and then specify the voltage updates to each channel based on the entries in the array. You can find examples by going to the following (or a similar) location in the directory structure of your computer (Windows OS assumed).
C:\Documents and Settings\All Users\Documents\National Instruments\NI-DAQ\Examples\MStudioVC2005\Analog Out\Generate Voltage
Best wishes,
Wallace F.
National Instruments
Applications Engineer

How do I make an oam file to be 100% width in browser?

I animated the edge file so that it's responsive to the width of the browser. It works in Edge when I preview & published, but when I placed the oam file into Muse it doesn't have that ability.
Dying to know, please help!

Hello!
Try to put your animations inside the new frame, and the frame to stretch the entire width of the template in Adobe Muse (until the red line). In addition, test page only in browsers, since I've noticed that myself Adobe Muse is not properly display such content. Unfortunately, I do not have an example of solutions to your problem, but maybe you'll find something interesting in the pages of adobe muse market! Thank you!

Runtime

Hi,
I wrote a program to retrieve data from three different master data tables and put it into an internal table.
I got an error message saying - 'Maximum Runtime Exceeded.'
What does it mean?
Thanks.

Hi,
Check the following SAP note 740648...
Symptom
A work process can exceed the maximum runtime (specified by the "rdisp/max_wprun_time" profile parameter) without being cancelled.
Other terms
COMMIT WORK, TH_REDISPATCH, maximum runtime, WP_HOLD
Reason and Prerequisites
The reason for this is that the maximum runtime of a work process is not only reset to the value of rdisp/max_wprun_time if a new user (or more generally: a new task) is dispatched into the work process, but also if the current user performs actions that are associated with communication with the message server.
This is the case with enqueue operations, for example.
Solution
As of the patch level mentioned below, there is a profile parameter for Releases 46D, 620 and 640 that you can use to change the behavior of the timer in these cases: If you set the "rdisp/hold_keeps_time_slice" profile parameter to the "TRUE" value, then, after communication with the message server, the timer is set to the value rdisp/max_wprun_time minus the time that the process consumed for this task up to now. This solves the problem in most cases.
However, since the explosion of the measurement of time is in the area of seconds, operations that occur between message server operations and require less than one second may lead to an extension of the overall runtime.
Parameters Values Default
rdisp/hold_keeps_time_slice FALSE, TRUE FALSE
As of Basis Release 7.0, the behavior described above is standard behavior and can no longer be changed. The parameter exists in other releases with the following patch levels:
46D: 1848
620: 1502
640: 18
Thanks and Regards,
Bharat Kumar Reddy.V

Sales order with reference to sales order

Hi,
 I need to create a sales order with reference another sales order using bapi CreateFromDat2. Please note, Sales Ord. Dist. channel, Div, sold-to to of the new order are different from original order. I gave reference order in field order_header_in-REFDOCTYPE . I am getting following error when I perform single test " FB Call: insufficient parameters. Can any of you tell me how to overcome this issue. And is it possible to create an order refering to another Saler order with different Sales Ord, Dist. channel, Division, sold-to ?
<REMOVED BY MODERATOR>
Cheers
Sudhaker
Message was edited by:
 Alvaro Tejada Galindo

There is an OSS note <a href="https://service.sap.com/sap/support/notes/370988">Note 370988 - BAPIs in SD: Creation with reference</a>
Symptom
This note describes the problems of the 'Create with reference' function when using BAPIs to create sales documents.
If you are working online, you can use this function module to create a sales document with reference to an existing sales document or a billing document (for example, a debit or credit memo request) according to fixed rules. The rules for transferring information from the source document to the target document are defined in the copying control on header and item level. The creation with reference permits an item selection.
When you use BAPIs in SD, a function of this type is not fully available. A reference is only possible for a quantity contract, so that the target quantity of the contract can be reduced by the order quantity of the sales document. Furthermore, the document flow is also updated.
As an alternative to 'Create with reference' in Transaction VA01, two variants are provided for solving the 'Create with reference' problem in the BAPI.
 1. Create a '1:1 ' - that is, a document copy of a sales document (customer quotation, order) with 'BAPI_SALESDOCUMENT_COPY'. At this point, you cannot create the 1:1 copy of either a billing document or a delivery.
 2. Create a sales document that refers to an existing document with 'BAPISDORDER_GETDETAILEDLIST' and 'BAPI_SALESORDER_CREATEFROMDAT2'.
Other terms
BAPI_SALESDOCUMENT_COPY, BAPI_SALESORDER_CHANGE, BAPI_CUSTOMERINQUIRY_CHANGE, BAPI_CUSTOMERQUOTATION_CHANGE, BAPI_SALESORDER_CREATEFROMDAT1, BAPI_SALESORDER_CREATEFROMDAT2, BAPI_SALESORDER_CREATEFROMDATA, BAPISDORDER_GETDETAILEDLIST
Reason and Prerequisites
As of yet, no method exists for creating a sales document that refers to an existing document.
Solution
For solution No. 1
 1. Create the documents using the BAPI_SALESDOCUMENT_COPY function module. However, this only permits a 1:1 copy without factoring out individual items.
 2. After you have created the document copy, you can use a change BAPI to edit this copy.
For solution No. 2
 1. Collect the data for the reference document (for example a customer quotation) with the 'BAPISDORDER_GETDETAILEDLIST' function module. In the example code, focus exclusively on the partners, items, schedule lines and conditions.
 2. Prepare the Data. Execute the 'copying control' manually. This way, you decide which values are to be transferred.
 3. Create the sales document using the 'BAPI_SALESORDER_CREATEFROMDAT2' function module by transferring the prepared data.
 4. Finally, you must remove a COMMIT WORK so that the sales document can be written into the database.
An example of solution 2 is attached as a text file. You are allowed to select items and quantities for example, if you use input parameters. If there are no entries, then transfer 1:1 from the reference document. When you enter the 'condition type' parameter, you can determine whether conditions are copied or recalculated ('G' for transferring from the preceding document; 'B' or ' ' for re-determining, and 'C' for re-determining with transfer of the manual elements).
Sample : <a href="https://websmp108.sap-ag.de/~sapidb/012003146900000486112004E/BAPI_COPY_WITH_REF.txt">ZZ_MS_BAPI_COPY</a>
Regards

FDM import script with selectable source file

Hi All,
I would like to build an import script attached to an import format that imports a text file with multiple value columns.
Source file:
Entity, Detail, Account 1, Account 2
E_abc, D_abc, 100, 200
In FDM this needs to be:
Entity, Detail, Account, Amount
E_abc, D_abc, Account 1, 100
E_abc, D_abc, Account 2, 200
So i need to loop through the file.
My biggest challenge is that when i attach a script to an import format in the import process i cannot select a file from inbox anymore, it has to be a pre-defined file.
Has someone an example or solution how to make a script-import format and enable the select file from inbox?
And if possible has someone an example script of the issue stated above?
Thanks in advance,
Marc

Hi Wayne..
Thanks for your reply (and sorry for the delay in mine).
Could you tell me what script to use to open the file in the befImport script, or how to rename the file in memory to a new one?
So i write a script that rewrites the file to a new file in the inbox but i need to tell FDM that it needs to process this new file.
Thanks,
Marc

Examples, exercises & solutions

Similar Messages

Maybe you are looking for