Examples of 7 to 9i upgrade wanted

My organisation is a charity (NGO) in the U.K. We are considering upgrading from 7 to 9i on Unix and I have been asked to gather general information about pitfalls and issues. Is there anybody who could provide me with a case study of a similar situation?
TIA,
Gavin.

Hi:
It is the fingerprint sensor and you can try the W8 driver from a newer model and see if that works.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109892-1&cc=us&dlc=en&lc=en...=
You can try the software too...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109764-1&cc=us&dlc=en&lc=en...=
Paul

Similar Messages

  • Can I use Apple store from a country other than the country I live in.  Example:  I live in USA and want to use Apple store in Thailand to buy and download thai content.

    Can I use Apple store from a country other than the country I live in.  Example:  I live in USA and want to use Apple store in Thailand to buy and download thai content.

    No, you can only buy content from your own country's store - to be able to buy form another store you need a valid billing address in that country and be in that country when buying from it. You can try requesting that the content that you want be added to the US store, but ultimately it's the content providers (record companies, film studios etc) that will have to grant Apple a license to sell it there : http://www.apple.com/feedback/itunes.html

  • Daq down counter example for pci-mio-16e-4 wanted

    Hi!
    I am searching for an example vi of a down-counter for
    ttl pulse trains.
    thnx,
    Holger

    Thanks for that, but that was also my first idea. Unfortunaly there is no
    example for an DOWN counter in that directory. they all count up.
    i want to count incoming a ttl-pulse-train and terminate that train(by
    dio-line) when
    counted exactly a certain number of counts. if i check the counts (600Hz)
    each time by software, there seems to be no chance to terminate the train
    at the desired number of pulses and thatfore i will have to use the daq card
    on board counter. and my idea is, that a down counter (which is specified in
    the
    manual) would do it.
    my question therefore is, if anyone has ever used a DOWN counter, because
    i have no idea how to realise it/how to use the daq-included down-counter
    vi, which
    i don´t realy understood
    i am thankful for any reply!
    bes
    t regards,
    holger
    "Nirmal Sharma" schrieb im Newsbeitrag
    news:[email protected]..
    > Hi,
    > there are numerous examples which you can find at this path:
    > C:\Program Files\National Instruments\LabVIEW 6.1\examples\daq\counter
    >
    > or Goto Find examples in Labview launching Panel -> Hardware Input and
    > Output -> DAQ -> Counters
    >
    > If you are using DAQ card, Goto ->Count buffered edges or count Edges.
    >
    > Hope this works. Your feedbacks are welcome.
    >
    > Best Regards,
    > Nirmal Sharma

  • Upgrade wanted

    I want to upgrade as high as possible - how far can I go within the limitations of my laptop? Will I need more memory?
    Keep it simple please - I may use computers but that's as far as I go!

    Rosemary:
    (Don't hear that name very often, anymore).
    what is HDD (I can guess at hard disk drive?)
    Good guess. Sorry for the short hand. It's quicker than typing out Hard Disk Drive.
    I have looked through the system profiler but wasn't able to track down the information - but I too would expect it to be the basic 60 GB.
    Go to Apple Menu > About this Mac > More Info > Hardware > Hardware > ATA and you will find complete information about your internal HDD. Capacity will tell you the total capacity, and Rotational Rate gives the speed.
    I "think" I can manage to do all this
    I'm pretty sure you can. We will work with you through the process.
    first I have to find the money!
    You're on your own there
    Replacing the HDD is, for me, in a little more nervous territory but obviously necessary if I am to get the full benefit of doing everything else.
    The PB G4 12" is pretty small and takes patience and time. When you are done with it, though, you will have the satisfaction of having done it, in addition to the benefits of having a newer, larger capacity drive.
    It is encouraging to find I can upgrade to Leopard as I would prefer to get as much as possible to last me longer.
    You will need the full retail version of Leopard. Computer specific versions will not work.
    You will find step by step directions at iFixit. Here are few tips you may find helpful:
    • Print out the ifixit directions as well as the screw guide ahead of time.
    • Be sure you have the right tools. You don't want to damage the screw heads or you may never get them out. And the Torx screw driver is critical. For a spudge I use the handle of an old toothbrush (choose one made of hard plastic), cut off the brush and bevelled the handle end like a flat blade screw driver). For some spudge jobs a credit card will do the trick.
    • Picking up on one user’s suggestion, I clicked on the pages of each step which involved removing screws to enlarge, then printed out the pages. I poked holes in the paper where the screws were removed, poked the screws in the holes and stacked the pages in order in which there were removed. Reassembling was a lot easier. No cups to tip over and spill. No guessing. Each screw was exactly in the right place. You can use an ice cube tray, egg carton, dixie cups etc. I previously used small medicine cups one for the screws in each step. I nested them so that the last ones out and the first to go back in are on top. (Some users report cutting up the screw guide and placing the applicable section in each container.)
    • Be very careful pulling out leads. Hold the lead as close to the plug as possible and wiggle (the plug ) to loosen its grip. Don’t hold the wires and pull as that can damage the cable, or worse, in some instances pull the wires out of the plug. Indeed, some users have pulled the socket off the logic board! Use needle nose pliers or tweezers if you can access the plug, or nudge the plug with a small instrument to help loosen its grip.
    • Use force gently in removing parts. Separating upper and lower case takes some doing. Use a plastic tool (spudge) so as not to leave marks.
    • Refer to the screw guide when reassembling computer. Putting longer screws in the wrong place can perforate the circuit board.
    Review the above to become familiar with the process and ask questions if anything is unclear.
    Here is a list of available drives for your computer at OWC. You may be able to purchase them for less elsewhere. Ask if you need help. Here is a list of RAM memory upgrades. You can install the RAM while you have the computer apart for installing the HDD.
    If you have data on the HDD you would like to move to the new drive you have a few options. Please don't hesitate to ask.
    cornelius

  • Windows Upgrade- Want to delete Old OS

    I have installed 2 OS in notebook. For that I patitioned hard drive.
    Now I want to remove Vista and want to keep windows 7 continue,
    I tried to upgrade windows 7 on windows vista. But it is not let me delete Windows vista.
    Any suggestion welcome...
    thanks

    How you want to make upgrade?

  • Cs5 upgrade wants to install as trial

    I just got a copy of the upgrade today. Entering serial takes me to install but the only choice takes me to a different directory than my current cs3 and wants to install it as a trial.  I did as suggested then I opened CS3 and it is not upgraded. 
    Checking my registered products shows that the upgrade has been registered as well as the original CS3 from 2007.  That was originally a windows install but the license was transferred to Mac.  I wonder if this is the source of the difficulty.
    Please advise as to what to do to get this installed as an upgrade.
    thanks,
    Mike

    OK, that helps but it is also saying that it only needs 100MB and that CS5 is already installed with an ! at the end of already installed.  The only thing on the machine right now is CS3.
    When I try to install should I check full install even though it says it is already installed?
    Maybe I should uninstall CS3 first so it goes to the applications directory?
    Also why does it say that the new install directory is a trial? 
    I'll proceed with a full install on the new disk and see what happens.
    will check back for more info later.
    thanks,
    Mike

  • Upgrade wanted but only to OS X 10.7 - macbook pro

    Hi all
    I currently have OS X 10.6.8 on my macbook pro. My university library software I need to install requires 10.7 minimum.
    Here lies my dilemma - I upgraded to Yosemite yesterday but it made my computer MUCH slower and it wouldn't let me download open source Office alternatives such as Open Office or Libreoffice as they are not Apple Store approved apps. I needed to do that, as my old version of Neooffice suddenly didn't work and you now have to pay £30 for the upgrade. So I used time machine to go back to my original 10.6.8 settings.
    So, is there a way to upgrade to 10.7 (not Yosemite) or over so I can install my university library programme AND be able to download some open source Office alternative or keep my old Neooffice version working?
    Is there an OS X you would advise me to upgrade to eg Lion, Mountain Lion, Mavericks etc that is preferred?
    Any advice and step by step instructions much appreciated.
    Thanks

    It's likely your Yosemite installation was messed up by the prior system you had installed.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Upgraded - Want to sync my media

    I have some questions regarding syncing my photos / iphoto, music/itunes and iPhone after I changed computers.
    I had an iMac with 10.7.5 and 1TB Hard drive which I used to sync my photos, music and iPhone to and a few days ago I bought a new MacBook Pro and got a quick sale for the iMac. Being a quick sale I just copied all my photos and music to an external hard drive but not the libraries as I was in a rush.
    So, long story short, I have my Music and Photos on a USB disk but no libraries.
    My iPhone syncs to the cloud so I should be somewhat safe.
    I have access to my Photostream through iPhoto on ML.
    Now, I do want to sync my phone and photos and music to my new MBP without earasing the phone AND since the MBP only has a 128GB drive i'd like to keep the files/libraries stored on an external source (USB drive).
    Is it possible / easy ?

    Try this ...
    On your iPhone, go to "Settings --> Mail, Contacts, Calendars --> Sync (under calendars, near the bottom of the list)".  Then select the "All Events" option.

  • Dv6-1214ax CPU original part or upgrade wanted

    Can anybody help with a new or upgrade CPU for a dv6-1214-001

    What is the installed CPU?
    Use the BIOS system information section to see what is installed or run CPU-z.
    The following image shows the CPUs supported by your notebook BIOS and hardware. reference source. Paviliion dv6 Maintenence & Service Guide
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Can anyone recommend a simple example for displacementmapfilter? I just want a simple expand effect.

    As the title says, can anyone recommend any simple displacementmapfilter examples?
    I have a bitmap image of a sleeping animal that I would like to add a small effect to that will make it look like it is breathing. I'm guessing this should be pretty simple with displacementmapfilter - a spherical distortion tweened over time over the animal's chest.
    Any suggestions?

    i don't think there's anything simple about the displacementmapfilter. i've tried to explain it before but i've never had the feeling that i was able to convey understanding.
    here's the displacementmapfilter at work:  www.kglad.com, click snippets, click displacement.
    here's the source code:  www.kglad.com/Files/forums/displacementMapFilter_AS3.fla
    p.s.  there's commented-out code in there that used a squeeze and bulge function during my early experiments that could probably be used by you.

  • New Oracle By examples available on OTN (Install, upgrade,agent patching ..

    Hi,
    The following OBEs are now available on 10.2.0.2 Enterprise Manager OBE page (http://www.oracle.com/technology/obe/obe10gemgc_10202/index.html) on OTN:
    Installing Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1.0)
    Patching Grid Control 10.2.0.1 to 10.2.0.2
    Deploying Oracle Management Agent using the Agent Push Application
    Patching 10.2.0.1 Management Agents to 10.2.0.2 Using Patch Wizard
    Thanks and Regards,
    Rajat

    Nice one. Thanks

  • I click on link, for example story on ESPN I want to read, and I get redirected to another page, often ad site

    I own a MacBook Air.  On really any site I go to I click on a link and get redirected to another page, often an advertisement.  For example, I am on ESPN and want to click on a story, when I click on the link, a new page or tab opens up.  I have to x out to get to my story.  I use Google and Safari.  In Safari, I click on a story in ESPN and new page opens up as well.  Can any one help?

    There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
    If you have trouble following those instructions, see below.
    Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
    The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
    Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination  command-C:
    /Library/LaunchDaemons
    In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
              com.something.daemon.plist
    and
               com.something.helper.plist
    Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
    If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
    /Library/LaunchAgents
    In this folder, there may be a file named
              com.something.agent.plist
    where the string something is the same as before.
    If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
    Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
    The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
    Open this folder:
    /Library/Application Support
    If it has a subfolder named just
               something
    where something is the same string you saw before, drag that subfolder to the Trash and close the window.
    Don't delete the "Application Support" folder or anything else inside it.
    Finally, in this folder:
    /System/Library/Frameworks
    there may an item named exactly
                v.framework
    It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
    Don't delete the "Frameworks" folder or anything else inside it.
    If you didn't find the files or you're not sure about the identification, post what you found.
    If in doubt, or if you have no backups, change nothing at all.
    The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • Cell Definition and Reverse sign Issue after upgrade

    Hi ,
    we are having a issue here after upgrade to BI 7 from 3.1c .
    There is a Collision between Cell Definition and Reverse sign in the query designer.
    Issue is . We have Key Figure "Net Days AR" which has Reverse Sign Checked under properties. In 3.1c when we ran the report the Net Days AR would get value like  for example    -40 . but now after upgrade to BI 7 SP 16 we are getting value 40. the negative sign is missing. The formula is correct.
    I went and checkd if we have any cell definitions defined on this and found the cell definitions onthis keyfigure.
    values are comming correct if there are  no cell definitions.
    Thanks in Advance and Points will be awarded.
    Thanks,
    Reddy

    we have the same problem. In BI 2004s with BEx 3.x when the cell reference is defined, the reverse sign flag is ignored.
    I opened a message to SAP. Until now no solution and I think we'll never receive solution. Here are the answers we received:
    SAP
    I have to say this is the limitation of front end 3.5.
    In designer 3.5, it works this way:
    When you define a cell referance, this cell is blocked from change of the column property change. No matter how you change the column key fig proerty, it keeps the original status when you define it.
    If you want the defined cell property, you need to delete the cell
    referance, change property, then redefine the referance.
    I agree this is very inconvinience, that's why I would recommend you to use query designer 7.0 if possible. With 7.0 front end, you can define separately the property for defined cells. It is more flexible.
    ME
    At the moment it is not possible to migrate to 7.0 frontend.
    I tried to delete the cell reference, change properties and redefine the reference. I tried to create new columns, define cell properties, save and define the cell reference. I tried several different combinations...
    No way, as soon as I define the cell reference, column properties are ignored.
    1) How can we restore the correct behavour of a query in frontend 3.5?
    2) If we found a way to restore it, we need a smart procedure to modify all our existing queries (including how to identify those affected by this inconvenience).
    SAP
    For front end 3.5, you need do following:
    1. delete cell referance
    2. change the column property (such as tick on or off the sign reversal)
    3. re-define the cell (this cell will with the new sign status)
    4. define formular base on cell
    After step 3, you can't change cell property whatever you do in
    column property. This is the designed behavior.
    If you want to change property after step 3, you need to start
    all over from step 1.
    ME
    I did it.
    Don't work. When I define the cell reference, column properties are ignored.
    SAP
    It seems there is some issue in front end.
    Do you use the front end 3.5 with latest patch?
    Could you please check front end installation as per sapbexc.xla (described in note 197460). If there are problems shown within this check do the following:
    - Remove your frontend via 'START' - 'PROGRAMS' - 'SAP FRONTEND' -'REMOVE SAP FRONTEND'
    - Install the lastest frontend and GUI patch (according to note 496977or 496989 again and check the installation).
    ME
    I don't think so. I am using:
    Sapgui 7.10 Patch 8
    Bex 3.50 Patch 3
    Bex 7.x Patch 5
    to be continued...

  • Files won't save since Maverick upgrade

    I have a file that exist in a folder and would like to replace it with an updated version of the same file (example.xls with example.xls) it asks if I want to replace and I say yes but the original file remains. I must first delete the original then svae the new version. This is only since I did the Maverick upgrade. Is there a fix for this.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Upgraded to Adabe 10.1x reader and drag and drop text problems

    I cannot drag and drop text from my saved PDF files to word files or for example, into online forms since upgrading to Adobe new reader version today. How can this problem be resolved?

    So after a month of trying to figure all this out I FINALLY fixed the problem!
    Before you do anything just go to your destop > right click personalize (this is for windows 7 - might be different for XP; I honestly forgot, but same idea) > find "window color" > select "advance appearance settings
    (I think can be found by just typing "window color and appearance" in the search from the start menu).
    Finally select "active title bar" (If the font is SEGOE UI, then following the link is the best thing to do; IF ITS NOT, I would think you can just follow the same steps and modify accordingly to how you want your fonts to look in iTunes). http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-to-change -system-default-font-in-all-parts/dfce15db-7337-420a-a42e-517521a8502e
    Hopefully this helps!!! Worked for me!

Maybe you are looking for