Examples of type

Indesign CC 2014: How to increase the size of the fonts display in the "Font Formatting Control Panel"
Can not you see the design of sources. The examples are too small.

Was well hidden!
Could have an extra large option.
Thank you very much!

Similar Messages

Simple OWB 10g R2 Example for Type 2 Dimensions Needed

Hello,
Does someone have a simple example of a Type 2 dimension on OWB 10g R2? That I can run and test. The ideal would be an MDL file that includes all the elements, so I only have to install and run it?
I have been trying to make this work for far too long now. All of this was not a problem in OWB 9i but I'm having trouble getting OWB 10g R2 to work like I'm used to.
Thanks
Eric
[email protected]

Sutirtha
FYI, with my configuration of having separate database instances for target and OWB repository I ran into a bit of an issue when deploying a map:
'RPE-01012: Cannot deploy PL/SQL maps to the target schema because it is not owned by the Control Center' error.
Even though I could do deploy tables, views, MVs et all but for some reason I couldn't deploy my mapping. Solution to get around this problem is to:
* create new OWB repository in the target environment using the REPOSITORY ASSISTANT
* add target schema as an OWB user using OWBREPowner (Global Explorer panel/Security/Users), check user as 'target schema' option
* start control center service against the target warehouse using target schema credentials
* delete previously created separate dedicated OWB repository
Now mappings can be deployed successfully.
My only concern now is if this is a valid legit configuration? I would hate to run into problems in the future once my environment becomes bigger.
What are your thoughts on this?

With examples process types

please give process types with examples

hi raj,
Process types in SAP with typical examples
MTS----
Auto parts
MTO----
Motor cycles, pumps
Engineer to order----
Elevators
REM----
switches
Sales order based REM----
Personal computers
Mass production----
lighting producs, walkmans,i pods
PP-PI
1.chemicals----
Paints, solvents
2.Pharmacheuticals----
Tablets, medicines, syrups.
Retail----
Food, Cosmetics.
IS - Auto
IS - Oil
IS - Retail
IS - Mobile etc.,
E N J O Y SAP
MM Arunkumar.

How do I find file types in finder? Example "resume" type PAGES?

So if I wanted to use spotlight, how would I search for resumes, kind pages documents, so I do not get any PDF or word doc hits?
I used to remember this.
Thanks

Type in .pages in the spotlight search bar. If you want to ignore any PDF files, you can turn off searching for that type of document.
OR
You could use a boolean search like this (probably more suitable)
resume (-doc -pdf)
More info on boolean searches in spotlight can be found here..
http://theappleblog.com/2005/05/27/boolean-searches-in-spotlight/
Hope this helps

Examples on type-pools

Hi all,
I come across type-pool : TRUXS. What is this type-pool use for?
Are there any type-pool? How do i list out all the type-pools available?
Thanks
William.

Hi,
REPORT ZTESTAA.
TYPE-POOLS:TRUXS.
DATA: BEGIN OF ITAB OCCURS 0,
     VBELN
LIKE VBAP-VBELN,
      POSNR LIKE VBAP-POSNR,
      END OF ITAB.
DATA:
ITAB1 TYPE TRUXS_T_TEXT_DATA.
SELECT VBELN         POSNR         UP TO
10 ROWS         FROM VBAP         INTO TABLE ITAB.
CALL FUNCTION
'SAP_CONVERT_TO_CSV_FORMAT'
EXPORTING
    I_FIELD_SEPERATOR    = ';'
TABLES
    I_TAB_SAP_DATA       = ITAB
CHANGING
    I_TAB_CONVERTED_DATA = ITAB1
EXCEPTIONS
    CONVERSION_FAILED    = 1
    OTHERS               = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO         WITH SY-MSGV1
SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    FILENAME = 'C:TEMPtest.txt'
TABLES
    DATA_TAB = ITAB1
EXCEPTIONS
    OTHERS   = 1.
list of available type pools you can get it from SE11,
use F4 help of TYPE-GROUP in SE11, you can find all.
regards
Vijay

Issue with xsd Data type mapping for collection of user defined data type

Hi,
I am facing a issue with wsdl for xsd mapping for collection of user defined data type.
Here is the code snippet.
sample.java
@WebMethod
public QueryPageOutput AccountQue(QueryPageInput qpInput)
public class QueryPageInput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class QueryPageOutput implements Serializable, Cloneable
protected Account_IO fMessage = null;
public class Account_IO implements Serializable, Cloneable {
protected ArrayList <AccountIC> fintObjInst = null;
public ArrayList<AccountIC>getfintObjInst()
return (ArrayList<AccountIC>)fintObjInst.clone();
public void setfintObjInst(AccountIC val)
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
Public class AccountIC
protected String Name;
protected String Desc;
public String getName()
return Name;
public void setName(String name)
Name = name;
For the sample.java code, the wsdl generated is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<wsdl:definitions
name="SimpleService"
targetNamespace="http://example.org"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
>
<wsdl:types>
<xs:schema version="1.0" targetNamespace="http://examples.org" xmlns:ns1="http://example.org/types"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://example.org/types"/>
<xs:element name="AccountWSService" type="ns1:accountEMRIO"/>
</xs:schema>
<xs:schema version="1.0" targetNamespace="http://example.org/types" xmlns:ns1="http://examples.org"
xmlns:tns="http://example.org/types" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:import namespace="http://examples.org"/>
<xs:complexType name="queryPageOutput">
<xs:sequence>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="xs:anyType" minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="queryPageInput">
<xs:sequence>
<xs:element name="fPageSize" type="xs:string" minOccurs="0"/>
<xs:element name="fSiebelMessage" type="tns:accountEMRIO" minOccurs="0"/>
<xs:element name="fStartRowNum" type="xs:string" minOccurs="0"/>
<xs:element name="fViewMode" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://example.org"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://example.org" xmlns:ns1="http://example.org/types">
<import namespace="http://example.org/types"/>
<xsd:complexType name="AccountQue">
<xsd:sequence>
<xsd:element name="arg0" type="ns1:queryPageInput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQue" type="tns:AccountQue"/>
<xsd:complexType name="AccountQueResponse">
<xsd:sequence>
<xsd:element name="return" type="ns1:queryPageOutput"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="AccountQueResponse" type="tns:AccountQueResponse"/>
</schema>
</wsdl:types>
<wsdl:message name="AccountQueInput">
<wsdl:part name="parameters" element="tns:AccountQue"/>
</wsdl:message>
<wsdl:message name="AccountQueOutput">
<wsdl:part name="parameters" element="tns:AccountQueResponse"/>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="AccountQue">
<wsdl:input message="tns:AccountQueInput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
<wsdl:output message="tns:AccountQueOutput" xmlns:ns1="http://www.w3.org/2006/05/addressing/wsdl"
ns1:Action=""/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSoapHttp" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="AccountQue">
<soap:operation soapAction=""/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServicePort" binding="tns:SimpleServiceSoapHttp">
<soap:address location="http://localhost:7101/WS-Project1-context-root/SimpleServicePort"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the above wsdl the collection of fintObjInst if of type xs:anytype. From the wsdl, I do not see the xsd mapping for AccountIC which includes Name and Desc. Due to which, when invoking the web service from a different client like c#(by creating proxy business service), I am unable to set the parameters for AccountIC. I am using JAX-WS stack and WLS 10.3. I have already looked at blog http://weblogs.java.net/blog/kohlert/archive/2006/10/jaxws_and_type.html but unable to solve this issue. However, at run time using a tool like SoapUI, when this wsdl is imported, I am able to see all the params related to AccountIC class.
Can some one help me with this.
Thanks,
Sudha.

Did you try adding the the XmlSeeAlso annotation to the webservice
@XmlSeeAlso({<package.name>.AccountIC.class})
This will add the schema for the data type (AccountIC) to the WSDL.
Hope this helps.
-Ajay

BADI for movement type 601 and COGS GL account

Hello SAP expert,
I am searching a solution from SAP enhancements.
The requirement is to provide different COGS GL account based on the Customer Account Assignment Group value(KNVV-KTGRD) when SAP performs goods issue. for example, movement type 601,
This means, when company ships goods to differnt customers, then SAP should generate different COGS GL account.
for example, when company ships goods to customer account assignment group '01' (Domestic customers), then SAP should generate COGS GL account 818100.
when company ships goods to customer account assignment group '02' (export customes), then SAP should generate COGS GL account 818200.
when company ships goods to customer account assignment group '03' (Testing - sample customers), then SAP should generate COGS GL account 818300.
the logic is following:
KNVV-KTGRD COGS GL account at goods issue
01 Domestic 818100
02 Export 818200
03 Testing - sample 818300
04 Testing - VOM 818400
05 Franchise 818500
Is there any similar BADI available to solve the above?
Happy New Year!
Regards,
Sylvia Chen

Hello,
First of all, Happy New Year!
Thank you for the tip.
Enhancement LMR1M002 was already implemented in the current SAP environment.
The text is "Account grouping for GR/IR account maintenance".
Function "EXIT_SAPLKONT_011" is the component under Enhancement LMR1M002.
That is all I can see from SAP.
I am not an ABAP person.
Can you provide information for the next step?
Thank you.
Regards,
Sylvia Chen

When I type in search words in the google box and then drop down to the search that matches what I want, and click on it, it does absolutely nothing. It used to complete the search, how do I get it to complete the search?

Here is an example:
I type Denver Dum in the google box.
It gives me several options, one is Denver Dumb Friends League, which is what I want. I bring the cursor to Denver Dumb Friends League and click. It does nothing. The google box still has Denver dum in it. The only way to get a search to be completed is if I type in the whole phrase and hit enter. How do I get it to search using just part of a phrase? It used to do this before I upgraded to the newer version of firefox. Thanks!

Do you have the Google Toolbar installed?
See:
* http://www.google.com/support/toolbar/bin/static.py?page=known_issues.cs

When I try to go to certain websites, I get redirected to a different website. How can I force Firefox to go to the exact website I type in?

Example:
I type in:
http://www.match.com/
It redirects me to:
http://jp.match.com/index.aspx?tcid=1097
This is most irritating. Everything turns up in Japanese, and I don't speak or write Japanese.

I think this was an issue with snagajob's site and they fixed it. Try it again and see if it works now!

Can I delete email addresses that pop up when I type a letter in the address bar.

my mail that I have linked to the mail app is yahoo and everytime I enter a letter into the to section it brings up other emails so I dont need to write it all out. For example: Ill type "M'" so I can email my brother and it will bring his up but then it will show other peoples email that I can click on, either to people Ive contacted once or people that I hardly ever talk to. How can I get rid of this without restting my touch?
Thanks

Hi A17,
There is a way. Go to Contacts on your iPod and delete the ones that start with "M" and see if that works. Delete them from your Yahoo account, then sync with iTunes. Hope this works.
xxmitchxx90

ORA-22913 while creating a QUEUE TABLE of a "Typed type"

Hi guys:
I'm trying to recreate an [AskTom's post|http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:8760267539329], but with a single difference. My Oracle Type contains a field that is another Oracle Type and when I try to create a QUEUE_TABLE, I got the ORA-22913.
Here are my steps:
create or replace TYPE PODTL_TYPE AS OBJECT
item varchar2(25),
ref_item varchar2(25),
physical_location_type varchar2(1),
physical_location number(10),
physical_qty_ordered number(12,4),
unit_cost number(20,4),
origin_country_id varchar2(3),
supp_pack_size number(12,4),
earliest_ship_date date,
latest_ship_date date,
pickup_loc varchar2(250),
pickup_no varchar2(25),
packing_method varchar2(6),
round_lvl varchar2(6),
door_ind varchar2(1),
priority_level number(1),
new_item varchar2(1),
quarantine varchar2(1),
rcvd_unit_qty number(12,4),
tsf_po_link_id number(10),
cost_source varchar2(4),
est_in_stock_date date
create or replace TYPE PODtl_coll as table of PODTL_TYPE;
create or replace TYPE PODesc AS OBJECT
doc_type varchar2(1),
order_no varchar2(10),
order_type varchar2(9),
order_type_desc varchar2(250),
dept number(4),
dept_name varchar2(120),
buyer number(4),
buyer_name varchar2(120),
supplier varchar2(10),
promotion number(10),
prom_desc varchar2(160),
qc_ind varchar2(1),
not_before_date date,
not_after_date date,
otb_eow_date date,
earliest_ship_date date,
latest_ship_date date,
close_date date,
terms varchar2(15),
terms_code varchar2(50),
freight_terms varchar2(30),
cust_order varchar2(1),
payment_method varchar2(6),
payment_method_desc varchar2(40),
backhaul_type varchar2(6),
backhaul_type_desc varchar2(40),
backhaul_allowance number(20,4),
ship_method varchar2(6),
ship_method_desc varchar2(40),
purchase_type varchar2(6),
purchase_type_desc varchar2(40),
status varchar2(1),
ship_pay_method varchar2(2),
ship_pay_method_desc varchar2(40),
fob_trans_res varchar2(2),
fob_trans_res_code_desc varchar2(40),
fob_trans_res_desc varchar2(250),
fob_title_pass varchar2(2),
fob_title_pass_code_desc varchar2(40),
fob_title_pass_desc varchar2(250),
vendor_order_no varchar2(15),
exchange_rate number(20,10),
factory varchar2(10),
factory_desc varchar2(240),
agent varchar2(10),
agent_desc varchar2(240),
discharge_port varchar2(5),
discharge_port_desc varchar2(150),
lading_port varchar2(5),
lading_port_desc varchar2(150),
bill_to_id varchar2(5),
freight_contract_no varchar2(10),
po_type varchar2(4),
po_type_desc varchar2(120),
pre_mark_ind varchar2(1),
currency_code varchar2(3),
contract_no number(6),
pickup_loc varchar2(250),
pickup_no varchar2(25),
pickup_date date,
app_datetime date,
comment_desc varchar2(2000),
PODtl PODtl_coll
These are my 3 Oracle types. When I try to create the QUEUE TABLE:
DBMS_AQADM.CREATE_QUEUE_TABLE(
Queue_table => 'PODESC_QUEUE_TABLE',
Queue_payload_type => 'PODesc',
Multiple_consumers => TRUE);
END;
I got the following error:
22913. 00000 - "must specify table name for nested table column or attribute"
*Cause:    The storage clause is not specified for a nested table column
or attribute.
*Action:   Specify the nested table storage clause for the nested table
column or attribute.
How can I solve this?

Here is the syntax used by Oracle in one of their internal tables.
orabase> select dbms_metadata.get_ddl('TABLE', 'ORDERS_QUEUETABLE', 'IX') from dual;
DBMS_METADATA.GET_DDL('TABLE','ORDERS_QUEUETABLE','IX')
CREATE TABLE "IX"."ORDERS_QUEUETABLE"
   (    "Q_NAME" VARCHAR2(30),
        "MSGID" RAW(16),
        "CORRID" VARCHAR2(128),
        "PRIORITY" NUMBER,
        "STATE" NUMBER,
        "DELAY" TIMESTAMP (6),
        "EXPIRATION" NUMBER,
        "TIME_MANAGER_INFO" TIMESTAMP (6),
        "LOCAL_ORDER_NO" NUMBER,
        "CHAIN_NO" NUMBER,
        "CSCN" NUMBER,
        "DSCN" NUMBER,
        "ENQ_TIME" TIMESTAMP (6),
        "ENQ_UID" VARCHAR2(30),
        "ENQ_TID" VARCHAR2(30),
        "DEQ_TIME" TIMESTAMP (6),
        "DEQ_UID" VARCHAR2(30),
        "DEQ_TID" VARCHAR2(30),
        "RETRY_COUNT" NUMBER,
        "EXCEPTION_QSCHEMA" VARCHAR2(30),
        "EXCEPTION_QUEUE" VARCHAR2(30),
        "STEP_NO" NUMBER,
        "RECIPIENT_KEY" NUMBER,
        "DEQUEUE_MSGID" RAW(16),
        "SENDER_NAME" VARCHAR2(30),
        "SENDER_ADDRESS" VARCHAR2(1024),
        "SENDER_PROTOCOL" NUMBER,
        "USER_DATA" "IX"."ORDER_EVENT_TYP" ,   <---------------------- seems analogous to what you are trying to do
        "USER_PROP" "SYS"."ANYDATA" ,
         PRIMARY KEY ("MSGID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS NOLOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "EXAMPLE" ENABLE
   ) USAGE QUEUE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS NOLOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "EXAMPLE"
OPAQUE TYPE "USER_PROP" STORE AS BASICFILE LOB (
ENABLE STORAGE IN ROW CHUNK 8192 RETENTION
CACHE
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT))Spend some time looking in directories under $ORACLE_HOME and you may well find the DDL that built it.

Rebate Issue: Qty Based Cond Type

Hi All,
I need to know only functional way (cant use update in pricing routine due to issues in business approvals) to tackle following Rebate requirement.
Background of issue:
User has created credit memo because the logistic discount was not correctly invoiced.
However in this case the Rebate Accrual got reduced
Reason:
System must have thought that total amount of cases was returned physically and thatu2019s why rebate accruals are reduced).
This is not correct because the Materials are not returned. The materials are still with the customer. Hence the rebate accruals should not be reduced in this case. The credit note is only written because of price differences and not because of returns.
Example: to understand the issue better:
Suppose we have Invoice with 100 CV and an invoice value of 100 u20AC.
Rebate 1.) Shows an amount of 100 u20AC * 4% = 4 u20AC accruals
Rebate 2.) Shows an amount of 100 CV * 0,20 u20AC = 20 u20AC
Now we came to know that the 100 u20AC net invoice was wrong because of a wrong on-invoice discount. Hence the invoice should not be 100 u20AC, but 80 u20AC. However the 100 CV still remain (NO CHANGE IN QTY).
The credit note should affect the rebates in the following way:
Rebate 1.) Should show after the credit note: 80 u20AC * 4% = 3,20 e accruals
Rebate 2.) Remains 20 u20AC accruals (100 CV * 0,20 u20AC)
Requirement:
We want that whenever credit notes are issued which that just price related (e.g. wrong logistic discount) and which do not have a material movement, the Qty-related rebate conditions should not be affected in that invoice.
This requirement must have been used/tackled in all projects where rebate functionally is used.
If anybody has still some confusion in understanding the requirement please let me know so that I can discuss it over the phone.
With Regards,
Tushar Gawande

Hello,
actually the rebate basis can be updated for the quantity scale and/or value scale based on the document category assigned to the sales document type in customizing.
I mean that except if you configured differently, actually are used the standard program for rebate calculation and settlement. Using the standard, a key field is the document category of the document type in customizing (table TVAK field VBTYP).
For the below list of standard document category:
A Inquiry
B Quotation
C Order
D Item proposal
E Scheduling agreement
F Scheduling agreement with external service
G Contract
H Returns
I Order w/o charge
K Credit memo request
L Debit memo request
W Independent reqts plan
0 Master contract
For example, document type with document category C or H update both: quantity and value rebate basis; document type with document category K or L update only value rebate basis.
If I understand properly, in your case when the user adjust the price via credit note, once posted to accounting, the reflect in the R.A. was in both direction: update of both quantity and value.
Personal feeling is that the document type used to adjust the price was not correct and that this document type (as per customizing) is configured to reduce both: quantity and value.
Did you check the customizing of the document type used to adjust the wrong discount?
Which category did you find?
Regards,

Determine class type of Generic Parameter (not via getGenericSuperclass()!)

I need to know the class type of a generic Parameter. Please imagine this class:
class MyGenericClass<T>
}In cases where other classes derived from MyClass and defined the generic parameter (like MyDerivedClass extends MyGenericClass<String>),
this snippets works just fine:
(Class<T>) ((ParameterizedType) getClass().getGenericSuperclass()).getActualTypeArguments()[0];But now I have no inheritance but the definition of the type parameter via instantiation:
MyGenericClass<String> entity = new MyGenericClass<String>();The method "getGenericSuperclass()" does not suit my needs because it does not target the actual class. Nor can "getTypeParameters() " help me...
After countless trying to retrieved the type information, I still have no clue how to determine for that case that (in my example) the type parameter
is a 'String'.
Does anyone know the solution?

Serethos_0 wrote:
Sure I could pass the class type itself as parameter to be stored in 'exportClassType'. But I only tried to adapt the idea used e.g. in Generic DAOs
as descibed here: [http://community.jboss.org/wiki/GenericDataAccessObjects]. The big difference is, that in the Generic DAO example the typed
information is available within the class definition ..
Besides that I am open for any other suggestion!I would recommend passing around the Class object as you say.
Some might suggest that you make MyGenericClass abstract, forcing any instantiation to be like this:
MyGenericClass<String> entity = new MyGenericClass<String>() {};That would indeed cause the String type parameter to be available at runtime, since you're creating an anonymous inner class. But it leads to a convoluted and extremely statically expensive instantiation pattern. Using the class object is a better solution IMO.

Handling pop up of sub type HR_MAINTAIN_MASTERDATA function module

Hi All,
I am using HR_MAINTAIN_MASTERDATA for creating employee it's working fine but i am not able to handle pop up for sub type.
For example sub type for Address it gives me pop up with values 1 Permamant address 2 Office address etc.
Anybody know how to handle such pop up in function module. How to provide values to sub type.
Thanks in advance.

Hi,
<li>Instead of using HR_MAINTAIN_MASTERDATA function module, you can use HR_INFOTYPE_OPERATION, because HR_MAINTAIN_MASTERDATA is used inside HR_INFOTYPE_OPERATION.
<li>Check the sample program .
REPORT ztest_notepad .
DATA:p0006 TYPE STANDARD TABLE OF p0006 WITH HEADER LINE.
DATA:return LIKE bapireturn1.
p0006-pernr = '00001234'.
p0006-subty = '2'.
p0006-endda = '99991231'.
p0006-begda = sy-datum.
p0006-anssa = '2'.
p0006-name2 = 'xyz'.
p0006-stras = 'Street 64'.
p0006-ort01 = 'US'.
p0006-pstlz = '560634'.
APPEND p0006.
CLEAR p0006.
LOOP AT p0006.
CALL FUNCTION 'HR_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = p0006-pernr.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
    EXPORTING
      infty         = '0006'
      number        = p0006-pernr
      subtype       = p0006-subty
      validityend   = p0006-endda
      validitybegin = p0006-begda
      record        = p0006
      operation     = 'INS'
      tclas         = 'A'
    IMPORTING
      return        = return.
IF return IS INITIAL.
    WRITE 'Successfully records created'.
ENDIF.
CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
    EXPORTING
      number = p0006-pernr.
ENDLOOP.
Thanks
Venkat.O

Handling pop up of sub type HR_MAINTAIN_MASTERDATA

Hi All,
I am using HR_MAINTAIN_MASTERDATA for creating employee it's working fine but i am not able to handle pop up for sub type.
For example sub type for Address it gives me pop up with values 1 Permamant address 2 Office address.
Anybody know how to handle such pop up in function module. How to provide values to sub type.
Thanks in advance.

HI R P,
The field SUBTY is there as an export parameter for function module you mentioned.
Please pass the value for that field when you call the FM in your program.
Hope this helps
Ajay

Examples of type

Similar Messages

Maybe you are looking for