Examples on usage the movement types 413E  and 412E

In what circumstances we are use the movement types 413E  and 412E with some practical examples
413E  :  Transfer posting Sales order to sales order
412E :   Reversal of sales order to own

Hi,
413E can be used while posting the Quantities which are diverted from one Sales Order to another Sales order of same/different customer. Like from Customer A to Customer B.
412E can be used posting back the Quantities from sales order stock to unrestricted stock.
Regards
SD

Similar Messages

  • Movement Types U61 and U62

    Hi Friends,
    I would like to know whether the movement types U61 and U62 are available in the system or they have to be created for installation.
    Looking forward for the reply at the earliest
    regards
    sudhakar.p

    Hello Sudhakar,
    Movements types  U61 and U62 are SAP Standard. These are used when the Integration of MM with IS-U Device management specially  During the device  technical Installation using the movement type U61, then the from stock the device stack is reduced and the device status become INST.
    Movement type U62 is same as device removal/Reverse/replacement the Device status is changes to ESTT.
    Hope this may help you , if you need more on Config level and Business Process level details please let me know....
    RAju

  • Restriction of Selecting Reason for movement based on the movement type

    HI,
    Defined Reason for movements for the movement types and made the field as " mandatory" in the control reason for the movement type.
    So, during the Goods movement transaction it becomes mandatory to enter the reason for movement code.
    But during the Goods movement transaction, it is possible to enter any reason for movement for any movement type. It needs to restricted with subject to the movement type.
    Example:
    Defined the Reason for movements 0001 & 0002 for the movement type 561.
    Defined the Reason for movements 0003 & 0004 for the movement type 563.
    During MB1C, now it is possible to select 0003 or 0004 for 561 as well as , it is possible to select 0001 or 0002 for 563.
    it needs to be controlled w.r.to the movement type.
    that is, if the movement type 561 is entered, then system should only allow the reason for movement either 0003 or 0004.
    Is it possible to control, the selection of "reason for movement" based on the movement type ?
    thanks in advance for your help.

    Hi Sundar,
    Check the transaction OMBS.Here you can make the entry of reason for movement mandatory check:controls and in reasons for movements you can maintain the allowed reasons for movement for the perticulatr movement type.
    Hope this help.
    Regards
    Ankush

  • Movement type 291 and 292

    What is the buisness scenario where movement type 291 and 292.
    and what is the accounting impact  for movement type 291 and 292

    Hello Amit,
    Please go to transaction OLMB->Movement Types and check the IMG documentation from Copy, Change Movement types.
    Then you'll see that:
    291 Goods issue for any arbitrary account assignment
    With this movement type, all account assignment fields are ready for input. You can assign the movement to any arbitrary account assignment object.
    The goods can only be withdrawn from unrestricted-use stock.
    Possible special stock indicators:
    E, K, P, Q
    Example:
    If you create a reservation in MB21 trx:
    with mov type '201': you will create a reservation against to cost center
    with mov type '261': you will create a reservation against to order
    with mov type '291': you couldl create a reservation against to cost center, order, wbs, sales order, network.
    So by using '291' you can directly perform a goods issue to a specific account assignment.
    I hope it helps you.
    Regards,
    Fábio Almeida
    MM Consultant

  • Recall process movement type configuration and account assignment for 671

    Hi Gurus-
    We have a retail recall business scenario.
    1. Create STO from Distribution Center and receive goods with 671 at DC from the store. If the store moving average price is $1.10 and at DC Mov. Avg. Price is $1.00. GL account for Inventory posting at DC is updated with store Mov. Avg. Price and the difference is posted at the Proce Difference account (PRD) account. In other words DC account gets updated with $1.00 and $0.10 is posted in PRD account.
    The problem-
    1. Is there any configuration to configure the movement type or recall document type to post to DC account at Store Retail moving average price ($1.10) without posting the PRD account? If not, any user exit that we can diploy to take the store mov. avg. price ($1.10) at the time of posting against delivery for 671?
    2. Also, if we are able to post the delivery with Store mov. avg. Price, the moving avg price at DC is likely to get updated with $1.10. How we can avoid that? Leave the moving avg. price at $1.00 at DC
    Please help! Reps for sure.
    Thanks!

    Hi Gurus-
    Can someone please shed some light on this?
    Thanks in advance!

  • Movement type 561 and GL Account 24301000

    Hello guys,
    I am trying to upload inventory through MB1C but receiving following error:
    "field selection for mvmnt type 561 / GL AC 24301000 differs for settlement period (003)"
    Can anybody help me how to fix this.
    Thanks

    Hi,
    The field selection for Movement type 561 is not matching with the field selection of G/L AC 24301000. This is causing the problem.
    Go to Tcode: OMWB, in this transaction you can check the difference between the field selection of movement type 561 and G/L AC, then change the field selection accordingly in SPRO for movement type (MM - Inventory -- Movement types -- copy movement types and Tcode: FS00 -- input the G/L account and company code, press enter -- click on tab- create/bank/interest, double click on the field status group, then check the settlement period whether it is suppressed, optional, required in both cases. They should be same in movement type and G/L field selection.
    Hope this helps.
    Thanks,
    Viswanath

  • Regarding Movement type 601 and 602

    Hi,
    We need to copy movement types 601 and 602. I would request to please provide me the configuration settings and all integration settings.
    Thank You,
    Waiting for your reply.
    Regards,
    Usha.

    Execute OMJJ where you have the option to copy the standard movement types.  Also search the forum before posting such answered question.
    thanks
    G. Lakshmipathi

  • Different Consumption Account for Movement type 201 and 261

    Dear All ;
    Client want use different consumption account for movement type 201 and 261  .
    How we canmap this in SAP
    Kindly suggest .
    Regards;
    Joydeep Mukherjee

    This you can acheive by setting account assignment indicator is checked.
    OMJJ >>> Movement Type >>>Account Grouping >>Check account Assignment
    If this indicator is set, the system checks whether a G/L account or an account assignment has been specified on the item screen when user post transactional data. If so, the system copies this data to the posting line for account determination.
    If this indicator is not set, the system always uses the G/L accounts or account assignments determined automatically.

  • Re: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349

    Reference discussion:  Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
    With reference to the above discussion and your explanation for user EXIT QAAAT0001, it was stated that:
    If you only have two inspection types, you can mark one as preferred.  Then with exit use logic that if MM = 311 use preferred inspection type, if 911 use, non-preferred inspection type.
    May I ask what are you refer to for MM? It seems like movement type to me, however, I can't find movement type field in the structure within the component of EXIT_SAPLQAAT_002.  Appreciate if you could shed some light on this.
    Best Regards,
    CY
    Branched from older discussion by moderator.  When there are questions concerning an older discussion, please create a new discussion with reference to the older one.  Thanks! 

    Yes.. you are correct.  But with the info that is provided by EXIT_SAPLQAAT_002, you should be able to identify the proper material document in table MSEG which will have the material movement. 
    You can use the values of plant, batch, material number, Purchase order number, Order number, item number, storage location as well as the current date since the exit would normally be executed on the same date the material movement was done.  You'd also probably only execute the logic if QKZ is "X".
    Craig

  • Copy the Movement types in OMJJ

    Hi,
    I have copied one movement type from 303 to 403. I assigned the tcode o MB1B and MIGO.
    Now I try to check in MB1B, Its no showing 403 mov type..but if I give manually, its allowing and working perfectlly..
    Anywhere any setting is missing while copy the mov type in OMJJ..
    Please Guide me.
    Regards,
    Priya

    Hi
    I am not sure of functioning of mvt types 401-403 which donot have any updates (value wise) but only quantity wise updation is there. 403 is standard mvt type defined by SAP, I hope it is not relevant for transfer posting where quantity and value will be updated. When I tried with Tcode MB11, it is appearing where as for MIGO, MB1B/A it is not. Hope its functionality doesnt support these Tcodes.
    When you copy any existing mvt type to other, use Z or X as prefix so that it will not fall under standard types.
    Thanks

  • MIGO : When the movement type field is changed in transaction is changed.

    Hi
    If the movement type field value is changed in the MIGO, i was getting a popup. this popup had a check box ( skip in future)
    I selected this and was doing my testing. Now how to restore it back. please help.

    Hi,
    Go to MIGO
    Here in Menu Settings > Default values
    Here click on "Redisplay tips already read"
    And click on "Adopt" button and then check in MIGO, it will start displaying the message pop-up

  • Conversion program to do movement type 202 and 309

    Hi everyone,
    I need to do a conversion program to upload current stock balance from 1 material to another material (Material to material transfer). This is because we have created a new material type, therefore i would need to move any current stock balance of 1 material (of a different material type) and create the material again in the new material type and transfer the current stock to it.
    Our consultant has decided upon using movement type 202 and 309 to do the goods movement required.
    Since MIGO could not be recorded, is there any other suggestion besides using ABAP program?
    Thanks in advance. Hope to get some feedback on this asap because this is urgent.

    Hi Bernard,
    You can check the direct input program RM07MMBL for goods movement.
    This is used in most of the cases to do a goods movement.
    Hope this helps
    Cheers
    VJ

  • Movement type 313 and 315 with special stock K.

    Hi,
    I would like to post a movement type 313 and 315 with special stock k (consignment) but it is not possible. Also i have tried to create a new movement type (OMJJ) coping 313 and trying to set stock special k in somewhere but I couldn't.
    it is possible a movement type 313 K or 315 K?
    Thanks in advance.
    Anna

    Hi Anna Barnils ,
    Not possible.
    Read the below help:
    SproMMInventory Management and Physical InventoryMovement TypesClick on the help infront of Copy, Change Movement Types and check movement types 313 / 315
    Regards
    Ramesh Ch

  • Movement types 251 and 201

    Hello SCN,
    I would just like to ask what is the difference of movement types 251 and 201?
    Can they be used for sales?
    What are the pros and cons in using both movement types?
    Please respond in a clear manner.
    Your prompt response will be much appreciated.
    Thanks.

    Hi
    Please respond in a clear manner.
    Your prompt response will be much appreciated
    These are highly condemnable
    What do you mean by clear manner?
    Friends who know about query respond to it and share whatever knowledge they have
    Most of the times it will be clear only and you cannot grasp it properly because you may be unclear
    No One needs your appreciation and you cannnot be expect them to be prompt
    You are not running a office to expect others to things promptly
    Regarding what you asked
    I have knowledge about Movement type 251
    One area this is used in IS RETAIL
    In Retail say RELIANCE in Chennai city has about 15 outlets
    All these 15 outlets will have point if sale system that is their billing system or billing machine
    All these billing machines are connected to SAP system in the backend and SAP system is available only in the headoffice of RELIANCE
    Now take an article say PEPSI 200 ml tin
    Across all 15 counters say in a particular day they have sold about 725 tins
    Now this sale information comes to the centralised SAP through IDOCS and gets updated
    When such sales information comes in SAP and an article  document that is material document ( to update inventory) and a billing document  ( to update financial accounts) gets created
    This material document gets created with Movement type 251 which reduces the warehouse stock and post it to sales
    We define in the POS ---SAP integration config this movement type as 251
    I dont have an SAP access right now to check what is movement type  201
    Regards
    Raja

  • What is the movement type on stock transfer across company codes

    <Deleted original post contents and retypes in capitalized letters - moderator >
    What is the movement type at the time of stock transfer between the company codes..
    Edited by: Arun Varadarajan on Sep 1, 2008 10:56 PM

    HI,
    Stock Transport Orders : -
    1. Plant to Plant one Step - Transfer Posting using Mvt Type 301
    2. Plant to Plant two Step - GI:303 & GR: 305
    3. Stock. Transport Order. w/o SD - GI: 351 & GR: 101
    4. Stock. Transport Order with SD - GI: 641 & GR: 101
    5. Stock. Transport Order with billing - GI: 643 & GR: 101
    Refer STO's in the below path for more details
    http://help.sap.com/saphelp_47x200/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
    Thanks & Regards,
    Kiran

Maybe you are looking for