Exange rate type in BCS

Hi,
I am a new to BCS. I want to Know the answer for the below questions:
1. how can I find the exchange rates which are using in BCS.
2. how can I find the key figures assigned the exchange rates.
3. how can I find the queries used the appropriate exchange rates.... and also further details...
I saw OB08 and TCURR table ..... I will appriciate everybody who send details...
Thanks in advance..

Hi ,
check this links ..
http://help.sap.com/saphelp_sem40bcs/helpdata/en/c0/f4693701e08332e10000009b38f8cf/content.htm
http://help.sap.com/erp2005_ehp_02/helpdata/en/5c/a1b142c444c96ae10000000a155106/content.htm
Regards,
shikha

Similar Messages

Error while determ. loc. crcy: exchange rate type M date 01/26/2011 frm SGD

Hi,
There is an issue like after order is created,while creating invoice(third party order) after saving there is message as its saved.
But when trying to go with either vf02 or vf03 there is an update termination as 'Error while determ. loc. crcy: exchange rate type M date 01/26/2011 from SGD to'...so any suggestions on this?

HI Srilatha,
Go to T.code OB08 there position the exange rate Ex: M in you case and valid from 01.01.2011 then give currency if it is INR give 1INR X 1 INR = 1 give according to you document currecy.
Thanks
Vinayak

Different Exchange rate type is picked while creating PO

Hi All,
We are maintaining daily exchange rates under exchange rate type "M" for currency GBP to INR. We have also maintained exchange rate type "ZCIG" but we are not maintaining daily exchange rates under this exchange rate type.
Still system is promting us to maintain the exchange rate under exchange rate type ZCIG instead of "M" while creating Purchase order. Becoz of this error i could not save the PO.
Please guide me on this issue.
Thanks
Sonal

Hello,
Could you please let me know how you have solved this problem.
I want a particular exchange rates for a particular vendor posting.
Thanks,
Srini

Mass update exchange rate type (not rate) in open sales orders

Hi all,
Our requirement is to update the exchange rate type at sales order header (VBAK-KURST) for all open sales orders with a new type created. (Z001). This field does not appear in MASS transaction for sales orders despite being present in the structure MASSSDHEAD.
This field cannot be located even in VA02 transaction (I am not sure if standard SAP masks or shows this field at header; I also can't find any transaction variants assigned).
Can anyone suggest how this field can be updated for sales orders either individually or in mass mode.
Regards,
KC
SAP SD

You are correct in indicating that Exchange rate type field is not seen in Header data of sales order. I checked screen layouts for various screens for sales order data and this field is not suppressed. The only reason could be that this field is not used in sales order screens
If you are interested, you could also check in the following way
1. Go to SE11, enter database table as VBAK
2. Once inside data dictionary table, click where used list button, select programs and screens and execute
3. click continue (don't select background)
4. now you would have list of programs and screens, this table is used
5. now start another session and go to transaction SE51
6. indicate program name as SAPMV45A and screen numbers as listed in step 4. you can check all screen numbers to see whether Exchange rate type field is listed in sales order layout.
7. Of particular interest would be screen number 4311 as this contains Financial accounting data & 4303 Billing data
8. you can check screen layout for screen 4311 & 4303. you would see Exchange rate type field is not indicated.
9. in case you could find this field in any screen, you could ask your ABAP consultant to add this field in the layout screen.
Hope this answers your question

ERROR in MIRO : An exchange rate type is not defined for country IN

Experts:
When I try to enter the invoice received from the vendor, I am getting the following message.
An exchange rate type is not defined for country IN
Message no. FF802
Can anyone provide me a solution for this?
Thanks,
Vijai

This is the explanation given in note 974619 for the above error message
Summary
Symptom
When you post an FI document, the system issues error message FF 801 or FF 802.
Other terms
Plants abroad, FF 801, FF802
Reason and Prerequisites
You use the 'Plants abroad' function.
See Note 882132 for more information about this.
Solution
If the 'Plants abroad' function is active, additional fields appear when you maintain the country global parameters (transaction OY01, table T005):
- Country currency       (Field WAERS)
- Exchange rate type     (Field KURST)
- Net discount base      (Field XSKFN)
- Net tax base           (Field XMWSN)
You must maintain the fields 'Country currency' and 'Exchange rate type'.
Otherwise, the system issues error message FF 801 or FF 802.
thanks
G. Lakshmipathi

How to change exchange rate type for specific pricing condition type

Hello every one,
I have a requirement for billing ie VF01.
currently all the exchange rate are being calculated with exchange rate type 'M' by default.
but now client want it should calculate exchange rate with type 'E' for two pricing condition type for all others it should calculate with type 'M'
Please any body can help me with the exit and code which i can use.
I have checked exits SDVFX008.
but how to change exchange rate with type 'E' only for two conditions.
as changing exchange rate at document header will change exchange rate for all condition type.

You need to assign KOMK-KURST = 'E', for those two condition types. If it had been item number specific, you could have used USEREXIT_PRICING_PREPARE_TKOMK(RV60AFZZ).
Do one thing, put a breakpoint on FM 'PRICING' and then do selective runtime analysis.
Check whether any user exit/BADI/ explicit enhancement are available when condition types are processed in a loop. If nothing is available, try implicit enhancement.
Link to refer for selective runtime analysis - Runtime Analysis for VOFM
Also try with VOFM requirements ( not sure whether changing KOMK-KURST is permissable in requirement as normally we only set sy-subrc values to suppress/allow condition types ). Don't forget to assign requirements against condition types in pricing procedure.

Error while creating PO- ENTER AUD / MYR rate type M(Currency).

Dear Friends,
While creating PO (PO-Currency with MYR u2013 Malaysia Curr), I faced this error message:
Error:: ENTER Rate AUD / MYR rate type M for 11/02/2009 in system settingsu201D
In OB08, I maintain the currency conversion, then system allowed. But:
Query:   My PO currency is MYR (Malaysia currency)
        Why system checking with AUD.
                Any config?
Please help.
Best regards,
LEINAL

Hi Leinal,
There is a config missing in SPRO-img.
Go to t.code OB08 and check for the dir and indir quot for currency conversion for
AUD to MYR and vice versa.
Hope either of the above 4 combinations is not maintained for the specific date.
Cheers
Arun.

Error with Exchange rate type

Hello all,
While releasing the billing document to accounting, getting the error:
'An exchange rate type is not defined for country US'.
In customer master, have maintained Exchange rate as 'M'.
where do we maintain the exchange rate type for country.
Thanks
Gauravjit.

HI Gauravjit,
Try this:
SPRO-F5- General Settings-Currencies-Define Translation ratos for currency translaction
Reward if it helps
regards
Srini

Using an Exchange Rate Type other than 'M' in a Purchase Order

I use several exchange rate types in SAP for various currency positions, specificially with pricing.
As a result, when I create a Purchase Order I want to use a different Exchange Rate Type, instead of the standard 'M'. I have seen the rates can be placed directly in the Purchase Order, but I would like the system to look up the required rate using a specific exchange rate type.
Can anyone provide any suggestions or guidance based on prior experiences ?
thanks
gino ruggiero

Dear Gino Ruggiero,
The MM functionality always uses the "M" rate.
Not able to release Purchase doc.
Regards,
Naveen.

HOw to see currency pairs in Exchange rate type

Hi,
Can anyone tell me how to see currency pairs in an exchange rate type?
Thanks

Hi,
I am not sure this is a right solution. But I have some inputs on your requirements:
1. For traveller cheques you may create a new payment method and do the required configuration for automatic payment program. Don't generate any payment medium while running APP.
2. For currency notes (cash payment) I am not sure how it works. But probably it is possible by creating an account (account ID) for a particular house bank and use that (house bank & account id) for making payment.
Per my knowledge we have never used payment method cash (currency notes) in APP. But logically it would work by create a new payment method and doing the required config for APP.
Please update if you found a better way to do this.
thanks & regards,
Kumar

User exit/BADI for changing the exchage rate type in MIGO

Dear guru's,
Please help me in finding the user exit/BADI to change the exchange rate type in MIGO.
Regards,
Abdul Rahim

did you check this one MB_GOODSMOVEMENT?
also exchange rates needs to be changed at Purchase order level and those will be reflected while creating MIGO.

Exchange rate type error

Hi,
I am trying to Purchase order PO so that time i am facing error as
Enter rate USD / INR rate type for 19.01.2011 in the system settings
Message no. SG105
Diagnosis
For the conversion of an amount into another currency, an entry is missing in the currency conversion table.
Procedure
Add the missing entry in the currency conversion table.
Execute function
You can then continue to process the commercial transaction
i have configured in OB08 and OBBS maintain the exchange rate type M for USD and INR.
but still i am facing error, please guide me to resolve this issue.
Thanks
Shital D

Hi,
I have checked with FI consultant Direct and Indirect Quo has maintaned,
please suggest me any other config is required to resolve this issue.
Thanks
Shital D

Exchange Rate Type M in MIRO

Hi
We have some issue in exchange rate . When i am doing MIRO this time i have geeting error enter rate / USD rate type M for 04.12.2009 in system setting.we have process different types Invoices with different currency in Miro to get this error message.
After i m exit in this MIRO screen. Than again enter MIRO T. COde and enter PO number this time i have no geeting any error.
We have check all the seeting in OB08 all are perfect. Colud please help me on this issue.
Thanks in advance
Why this error is geeting in first time.

Srikanth,
Yes, exactly it is the rate upon 28.01.2011that should be relevant for the actual document.
Exchange rate has not entered manually in document header by interface nor by user. Interface only feed document amount and currency i.e. no rates.
Standard quotation in table TCURN for GBP=>USD is:"1" Direct quotation valid from 01.01.1800
Standard quotation in table TCURN for "Blank"=>GBP is:"2" Indirect quotation valid from 01.01.1800
Translation ratio for currency pair GBP => USD for exch rate type M is 1:1, valid from 01.01.1800, alt ERT=blank.
Translation ratio for currency pair USD=> GBP for exch rate type M is 1:1, valid from 01.01.1800, alt ERT=blank.
Translation ratio for currency pair USD=> GBP for exch rate type M is 1:1, valid from 31.10.2010, alt ERT=blank.
Maintained exchange rate valid for the period 31.12.2010 - 30.01.2011 for exchange rate type M is 1 USD= 0.64114 GBP
Amounts in document are
Doc. Curr. Amount= 187.44 GBP
LC2 Amount= 281.16 USD
Rate used for LC2 Amount in document equals 1 USD = 0.6667 GBP
Correct LC2 Amount with rate 1 USD= 0.64114 GBP should be 292,35 USD.
Kind regards,
Linda

Exchange rate type for version - error message GP541 during confirmation

Hi FICO Experts,
I bumped into a problem during confirmation in CO15. (I would like to get the SFG by mvt 101 and consume the raw material by 261).
The error messase I get is:
Maintain the exchange rate type for version 000 in 2009
Message no. GP541
Diagnosis
You want to use plan version 000 with controlling area 1000 in fiscal year 2009.
You have not specified an exchange rate type for this plan version for fiscal year 2009. Since the update of all currencies in 2009 is active in the control indicators of the controlling area, currency conversions are possible and sometimes also needed.
It is therefore necessary to specify an exchange rate type for plan version 000 in year 2009.
System Response
The system will not accept your entry.
Procedure
1. Please maintain plan version 000 first using the function 'Change Plan Version', or
2. correct your typing error.
I'd like to ask you to please help to resolve this issue.
Thanks,
Csaba

go to Maintain Version at SPRO-Controlling-General Controlling-Organization->Maintan Version and do what ever it says. Provide Exchange rate type P or M would resolve your issue

No daily exchange rate defined for rate type Corporate

We are entering a transaction in AR for currency XDR (Nav Path in Receivables: Transactions->Transactions; Form Name: ARXTWMAI, FOrm Version: 11.0.62).
The currency XDR is supposed to be IATA Rate related and has nothing to do with Corporate Exchange Rate (i.e. Bank rate). We have IATA Rate and Corporate conversion rate types (Nav Path in Receivables: Setup->Financials->Currencies->Rates->Conversion Type).
While entering the transaction, we get this message:
"FRM-40735: ON-INSERT trigger raised unhanled exception ORA-20000.
ORA-20000: GLMCCURB: There is no daily exchange rate defined from XDR to MUR for MAY-00 for rate type Corporate.
ORA-06512: at "APPS.RA_MRC_CUSTOMER_TRX_BIUD", line 318
ORA-04088: error during exception of trigger 'APPS.RA_MRC_CUSTOMER_TRX_BIUD'
ORA-06512: at "APPS.ARP_PROCESS_HEADER_INSRT_COVER", line 786
ORA-06512: at line 1
APP-01728: An assignment does not exist for these parameters.
Cause: An attempt was made to find a sequence for this document flexfield. The option says Sequential Numbering is only partially used.
Action: None is necessary unless you expected this document flexfield to have a sequence defined."
We checked the Daily Rates from XDR to MUR (Nav Path in Receivables: Setup->Financials->Currencies->Rates->Daily) and it shows only IATA rates, which is correct since XDR is not for Corporate rate type.
What we don't understand is why the error message prompts for an exchange rate to be defined from XDR to MUR for rate type Corporate.
Where is it defined that the transaction should look for rate type Corporate? Should I define it to look for IATA rate type for such kind of transaction?
Can anyone advise. Thanks.

Andrew Li,
1.For the first message, please check to your DBA, maybe there is some patches should apply.
2. For the error msg APP-01728: An assignment does not exist for these parameters. Do you use document sequence number ? If Yes, make sure your document sequence has been assigned to proper SOB, and then please check profile option for Sequential Numbering. The Sequential Numbering profile should Partially Used or Always Used.
I hope it will solve your problem
Regards
Mahendra
null

Exange rate type in BCS

Similar Messages

Maybe you are looking for