Exceeds Disc Capacity when it shouldn't
I'm creating a DVD with a single title and one main menu that simply has a play button. The DVD compliant mpg is 2,675,243 KB. Encore is saying that my project exceeds disc capacity. I have no ROM content on this disc. This DVD is one in a series of 20. All of the others have fit on a DVD 5 fine, some with significantly larger source files than this. Does anyone have any idea why I'm getting this error? I have tried recreating the project from scratch, but I get the same results every time.
Thanks.
Ok, I went ahead and tested it now. What I suspected was indeed the case. The source files for this series of DVDs that I'm doing are of questionable quality...well downright low quality. The client is aware and that's what they want to do. Anyway, something about that file must be corrupt because the resulting encode is showing up as non-compliant (all my other files did not need to be Transcoded).
Anyway, long story short, Encore wanted to Transcode, and my Transcode settings were at a much higher bit rate than these low quality DVDs we're doing. Therefore the new, transcoded file turned out to be a lot larger than my original source file. I adjusted the Transcode settings and now it fits.
Thanks again for trying to help out! Case closed.
Similar Messages
-
I am exporting my project from CS3 to Encore. The message tells me my video file exceeds the capaci
I am exporting my project from CS3 to Encore. The message tells me my video file exceeds the capacity of the disc. Any help? In fact I have adjusted the bitrate to 4478 MB and it let me pass, But when it goes to ENcore the message says the file exceeds 4.7 GB. I chacked up it is true the M2V files is over 5 GB. Why is it? Anyone can help? Thanks a lot!
>a " trick " question
Hmm... let's see here...
The Semi has taller tires, but the Ferrari has wider tires
The Semi has 18 gear speeds, the Ferrari has a 6 speed transmission
The Semi and the Ferrari both have a supercharger
The Semi runs Diesel, the Ferrari runs high octane gasoline
The Semi driver is about 6 feet above the roadway, the Ferrari driver about 6 inches
The Semi driver has a CB, the Ferrari has a stereo with 12 speakers
I think this deserves a bit more study... -
Errors with Queue exceed maximum capacity of: '65536' elements
I faced this issue recently , where the messaging bridges from an external domain was not able to connect my my domain.
When i checked the logs i found one of the server with the below error.
####<Feb 28, 2011 7:31:23 PM GMT> <Warning> <RMI> <dyh75a03> <managed06_orneop02> <ExecuteThread: '2' for queue: 'weblogic.socket.Muxer'> <<WLS Kernel>> <> <
BEA-080003> <RuntimeException thrown by rmi server: weblogic.rmi.internal.BasicServerRef@a - hostID: '4275655823338432757S:dywlms06-orneop02.neo.openreach.co
.uk:[61007,61007,-1,-1,61007,-1,-1,0,0]:dywlms01-orneop02.neo.openreach.co.uk:61002,dywlms02-orneop02.neo.openreach.co.uk:61003,dywlms03-orneop02.neo.openrea
ch.co.uk:61004,dywlms04-orneop02.neo.openreach.co.uk:61005,dywlms05-orneop02.neo.openreach.co.uk:61006,dywlms06-orneop02.neo.openreach.co.uk:61007,dywlms07-o
rneop02.neo.openreach.co.uk:61008,dywlms08-orneop02.neo.openreach.co.uk:61009,dywlms09-orneop02.neo.openreach.co.uk:61010:orneop02:managed06_orneop02', oid:
'10', implementation: 'weblogic.transaction.internal.CoordinatorImpl@f6ede1'
weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements.
weblogic.utils.UnsyncCircularQueue$FullQueueException: Queue exceed maximum capacity of: '65536' elements
at weblogic.utils.UnsyncCircularQueue.expandQueue(UnsyncCircularQueue.java:72)
at weblogic.utils.UnsyncCircularQueue.put(UnsyncCircularQueue.java:94)
at weblogic.kernel.ExecuteThreadManager.execute(ExecuteThreadManager.java:374)
at weblogic.kernel.Kernel.execute(Kernel.java:345)
at weblogic.rmi.internal.BasicServerRef.dispatch(BasicServerRef.java:312)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:1113)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:1031)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:225)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:805)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:782)
at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:705)
at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:651)
at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:123)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:32)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
>
As a workaround , i had restart this server. After this bridges from ext domain was working.
Has any one come across this issue before.
Regards
DeepakFound this issue again in one of the domains....the threads dumps is showing deadlocks.
Found one Java-level deadlock:
=============================
"ExecuteThread: '3' for queue: 'weblogic.kernel.Default'":
waiting to lock monitor 0868dea4 (object a4e99be8, a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer),
which is held by "ExecuteThread: '6' for queue: 'weblogic.kernel.Default'"
"ExecuteThread: '6' for queue: 'weblogic.kernel.Default'":
waiting to lock monitor 00255304 (object b23be050, a weblogic.transaction.internal.ServerTransactionImpl),
which is held by "ExecuteThread: '0' for queue: 'weblogic.kernel.Non-Blocking'"
"ExecuteThread: '0' for queue: 'weblogic.kernel.Non-Blocking'":
waiting to lock monitor 086677a4 (object a4e99c00, a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer),
which is held by "ExecuteThread: '3' for queue: 'weblogic.kernel.Default'"
Java stack information for the threads listed above:
===================================================
"ExecuteThread: '3' for queue: 'weblogic.kernel.Default'":
at weblogic.transaction.internal.TransactionLoggerImpl$LogDisk.release(TransactionLoggerImpl.java:1323)
- waiting to lock <a4e99be8> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
- locked <a4e99c00> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
at weblogic.transaction.internal.TransactionLoggerImpl.release(TransactionLoggerImpl.java:389)
at weblogic.transaction.internal.ServerTransactionImpl.releaseLog(ServerTransactionImpl.java:2767)
at weblogic.transaction.internal.ServerTransactionManagerImpl.remove(ServerTransactionManagerImpl.java:1466)
at weblogic.transaction.internal.ServerTransactionImpl.afterCommittedStateHousekeeping(ServerTransactionImpl.java:2645)
at weblogic.transaction.internal.ServerTransactionImpl.setCommitted(ServerTransactionImpl.java:2669)
at weblogic.transaction.internal.ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1875)
at weblogic.transaction.internal.ServerTransactionImpl.localCommit(ServerTransactionImpl.java:1163)
at weblogic.transaction.internal.SubCoordinatorImpl.startCommit(SubCoordinatorImpl.java:274)
at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:492)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:435)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:430)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
"ExecuteThread: '6' for queue: 'weblogic.kernel.Default'":
at weblogic.transaction.internal.ServerTransactionImpl.onDisk(ServerTransactionImpl.java:836)
- waiting to lock <b23be050> (a weblogic.transaction.internal.ServerTransactionImpl)
at weblogic.transaction.internal.TransactionLoggerImpl$LogDisk.write(TransactionLoggerImpl.java:1252)
- locked <a4e99be8> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
- locked <a4e99bb8> (a weblogic.transaction.internal.TransactionLoggerImpl$LogDisk)
at weblogic.transaction.internal.TransactionLoggerImpl.flushLog(TransactionLoggerImpl.java:614)
at weblogic.transaction.internal.TransactionLoggerImpl.store(TransactionLoggerImpl.java:305)
at weblogic.transaction.internal.ServerTransactionImpl.log(ServerTransactionImpl.java:1850)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrepare(ServerTransactionImpl.java:2118)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:259)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228)
at weblogic.transaction.internal.TransactionManagerImpl.commit(TransactionManagerImpl.java:303)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1279)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1190)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:1989)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:1985)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2686)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
"ExecuteThread: '0' for queue: 'weblogic.kernel.Non-Blocking'":
at weblogic.transaction.internal.TransactionLoggerImpl$LogDisk.release(TransactionLoggerImpl.java:1322)
- waiting to lock <a4e99c00> (a weblogic.transaction.internal.TransactionLoggerImpl$IOBuffer)
at weblogic.transaction.internal.TransactionLoggerImpl.release(TransactionLoggerImpl.java:389)
at weblogic.transaction.internal.ServerTransactionImpl.releaseLog(ServerTransactionImpl.java:2767)
at weblogic.transaction.internal.ServerTransactionManagerImpl.remove(ServerTransactionManagerImpl.java:1466)
at weblogic.transaction.internal.ServerTransactionImpl.setRolledBack(ServerTransactionImpl.java:2597)
at weblogic.transaction.internal.ServerTransactionImpl.ackRollback(ServerTransactionImpl.java:1093)
- locked <b23be050> (a weblogic.transaction.internal.ServerTransactionImpl)
at weblogic.transaction.internal.CoordinatorImpl.ackRollback(CoordinatorImpl.java:298)
at weblogic.transaction.internal.CoordinatorImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:492)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:435)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:430)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Found 1 deadlock. -
[SOLVED]dmraid: "sda: p4 exceeds device capacity" errors during bootup
hello all.
I made my first raid and arch64 setup. everything is working and its fast
My laptop (asus g71v) suports raid, and i've managed to get it to work with windows and linux, using intel raid setup in bios.
I'm using dmraid to create the fakeraid devices in /dev/mapper and system boots. But I can see this errors. It looks that linux is trying to acess the discs directly and gives structure errors.
dmesg
scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.C0 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sda: p4 exceeds device capacity
sd 0:0:0:0: [sda] Attached SCSI disk
sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 4:0:0:0: [sdb] Attached SCSI disk
attempt to access beyond end of device
sda: rw=0, want=1250273160, limit=625142448
Buffer I/O error on device sda4, logical block 114340848
attempt to access beyond end of device
sda: rw=0, want=1250273160, limit=625142448
Buffer I/O error on device sda4, logical block 114340848
attempt to access beyond end of device
sda: rw=0, want=1250273272, limit=625142448
Buffer I/O error on device sda4, logical block 114340862
attempt to access beyond end of device
sda: rw=0, want=1250273272, limit=625142448
Buffer I/O error on device sda4, logical block 114340862
attempt to access beyond end of device
sda: rw=0, want=1250273280, limit=625142448
Buffer I/O error on device sda4, logical block 114340863
attempt to access beyond end of device
sda: rw=0, want=1250273280, limit=625142448
Buffer I/O error on device sda4, logical block 114340863
attempt to access beyond end of device
sda: rw=0, want=1250273280, limit=625142448
Buffer I/O error on device sda4, logical block 114340863
attempt to access beyond end of device
sda: rw=0, want=1250273280, limit=625142448
Buffer I/O error on device sda4, logical block 114340863
attempt to access beyond end of device
sda: rw=0, want=1250273280, limit=625142448
Buffer I/O error on device sda4, logical block 114340863
attempt to access beyond end of device
sda: rw=0, want=1250273280, limit=625142448
Buffer I/O error on device sda4, logical block 114340863
attempt to access beyond end of device
sda: rw=0, want=1250273280, limit=625142448
attempt to access beyond end of device
sda: rw=0, want=1250273224, limit=625142448
attempt to access beyond end of device
sda: rw=0, want=1250273272, limit=625142448
attempt to access beyond end of device
sda: rw=0, want=1250273280, limit=625142448
attempt to access beyond end of device
sda: rw=0, want=1250273280, limit=625142448
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
ReiserFS: dm-3: using ordered data mode
ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-3: checking transaction log (dm-3)
ReiserFS: dm-3: Using r5 hash to sort names [
mkinitcpio.conf
MODULES="ahci sd_mod reiserfs"
HOOKS="base udev autodetect dmraid"
is there a way to remove this errors? thanks, and sorry my english
Last edited by TigTex (2009-01-14 03:02:04)... latest kernel update solved all my problems and added a nice performance boost.
-
HP OfficeJet Pro 8500 goes to sleep, but often wakes up when it shouldn't
HP OfficeJet Pro 8500 goes to sleep, but often wakes up when it shouldn't. This happens over and over. It used to sleep until I sent something to be printed. I now shut the printer down, but that takes a long time to start it up.
When you finally get around to looking at my post, never mind.
I reset the factory defaults on the printer and reauthorized my WiFi network.
Now it is working. -
Podcasts are syncing when they shouldn't be
My iPod finally ran out of space so I wanted to remove some of the video podcasts from it. I have my podcast syncing set to sync the selected podcasts so I thought I could just uncheck the ones I didn't want to keep on my iPod and sync to remove them. That didn't work so I put my iPod in manual sync mode and removed them. I turned off the manual sync option and told it to sync again and it's copying all my podcasts (even the ones that aren't checked on the podcast tab). How do I make it stop so I can free up some space?
Ok, I can confirm that the problem doesn't affect music playlists.
I've also noticed that the files that get copied when they shouldn't take up more space than the ones that are supposed to be there. I noticed this by syncing, checking a podcast that was previously unchecked, then resyncing. It wasn't a lot of space, only around 10-25 mb.
I've also found a workaround to get the files off my iPod. I have the "Sync only checked songs and videos" option checked on the summary tab for my iPod in iTunes. I can uncheck each individual podcast that I don't want to be on my iPod, then resync and they are removed. So I guess the problem is only present on the Podcasts (possibly movies and tv shows too) tab of the iPod screen in iTunes.
Is there somewhere else I should go to submit a bug report? -
iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
iSO image document but the box that should open to select use iso does not open. How should I proceed?The Mac SuperDrive built into your Mac is the Optical drive.
1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
4. Partition your drive.
5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2. -
I have a 16GB San Disc that when more than half full and trying to transfer the images to the iPhoto library I get the message "communication error". How can I update my computers software to be SDHC compatable? I can buy a card reader but thought an update to the software would fix this problem.
Thank you for any solutions or advice.KRDHarris-
I am not familiar with Flickr, but found their support page at <Flickr Support>. You may get better help there than here. I get the impression that the App is somewhat buggy.
The iTunes preview page indicates the App is for iPad as well as the iPhone. <Flickr App Preview>
Fred -
I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?
update manually,: http://www.adobe.com/downloads/updates/
-
I keep getting the message "macintosh hd disc full" when I try to edit or import video. How can I make room?
You can go to Applications, Utilities, Activiy Monitor to see just how much space is available. To free space you need to remove files that take a lot of space, things like videos, photos, music. Get an external hard drive, OWC http://www.macsales.com has a good selection, and move material off the internal drive.
-
AfterValueChange event trigged when it shouldn'tbe...
Hi there,
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. the
field loosing focus. The problem is that I'm trying to recreate this in
a simple test class, but now it won't happen. I still have the original
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
Any ideas as to why this could be happening?
Many thanks in advance.
Jaco
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Thanks for the replies so far, but this is not the problem. I know about
the "Validate on keystroke" option and it is definitely swithed off.
I was rather thinking along the lines of this being be a 'funny' in
Forte. Has anyone seen this before? Here is more information:
1) The windows that it is happening on all have parent windows.
2) The fields with this problem are all part of a mapped gridfield, ie.
it has a type.
However, I have constructed a test class with these characteristics, but
it is no good. There must be something else that could cause this. Any
ideas?
-----Original Message-----
From: Rottier, Pascal [SMTP:[email protected]]
Sent: Friday, October 09, 1998 10:53 AM
To: Fouche, Jaco
Cc: Forte Users Mailing list
Subject: RE: AfterValueChange event trigged when it shouldn't be...
Hi Jaco,
Check if the option "Validate on keystroke" is set
to true on the widget that posts the AfterValueChange.
If so, than that's the reason. Turn it off and your
problem will go away.
Pascal
Hi there,
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie.
the
field loosing focus. The problem is that I'm trying to recreate this
in
a simple test class, but now it won't happen. I still have the
original
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
Any ideas as to why this could be happening?
Many thanks in advance.
Jaco
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Block PP Work Center capacity when breakdown maintenance order create on that work center
Hi All,
My Client want to Block PP Work Center capacity when breakdown maintenance order create on that work center, how can i do it ..
Please help me.
PayalDear Sir,
I have Done Every think but still Production Order is create.
CM50
OIOI
CO02
Payal -
How to use the 5 recovery discs made when new???
I have a Toshiba Satellite L455-S5046. I purchased this laptop new in a factory sealed box, a little over a year ago.
When I opened it, I made the suggested recovery discs using 5 DVD+RW 4.7GB discs.
Well, now after having issues with installing a windows update and a bluetooth adapter, the laptop just doen't work the same. I get script errors on web pages and have been spending way too much time repairing issues like invalid "not genuine Windows 7" messages.
So, I attempted a recovery using the discs made when new, and the computer tells me the recovery disc is not valid. What the heck? I did exactly what the computer suggested on new startup. The discs are not damaged and have been stored in a safe place.
Can anyone walk me through using these discs? If I order the recovery discs from Toshiba, will this restore to original condition?
Thanks for the help.
Solved!
Go to Solution.I just made a "System Repair Disk" going through Control panel, Backup and Restore on my L775D and it is identical to the Disk 5 made when I got the machine using the Create Recovery Media process.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit -
AltKey Uniqueness Rule firing when it shouldn't
Hello,
I am using JDev 11.1.1.4.0.
I have a 'Name' field that has Altkey for uniqueness rule. It works fine. In fact, it works too well that the rule fires when it shouldn't.
So I was looking for an example to execute the validation conditionally, for my case only when 'Save'.
Any suggestion/comment appreciated.
Thank you
Bones JonesNo reason in particular, when I created the class, FlashBuilder put it in there (I'm using Flash Pro CS5 + Flash Builder 4). I read that it calls it by default when the class is constructed, so having it in or out didn't really matter. I did comment it out with no luck, but I ended up shifting around the timeline quite a bit today and the problem has gone away. It seemed to only do it when it was in the first frame.
Thanks for your help, I'm going to investigate it further when I have time just for reference, I'll post anything I find here.
-Nick -
I have an iMac 27", running OS X 10.9.3 with 16GB omemory, 1 TB disc capacity and
I have a late model 2009 iMac with 27" screen. I am running OS X 10.9.3 and have a 3.06 GHZ Intel core 2 Duo processor. I have 16GB of memory and the disc capacity is 1 TB. I have a frequent problem with the pointer on the screen freezing in place. The only way I can fix the problem is to restart the computer. I am looking for causation and fixes.
Impossible to state if you don't provide any useful information. A good place to start might be by posting an EtreCheck report and then we can look for any obvious causes such as using antivirus apps or any other apps that are unncessary and may cause problesm. You can get EtreCheck by clicking:
http://www.etresoft.com/etrecheck
Maybe you are looking for
-
Mid-2009 13" MacBook Pro emits high-frequency noise when engaged for sound
Recently I noticed that when the MacBook Pro activates the sound output device for built-in speakers, a high-pitched whine or noise begins, and does not stop until the card deactivates again. The sound is not proportional to brightness, hard drive ac
-
Dear Expert, How do we check the report of pending inbound delivery in Purchase order? I have problem, during i post GR by inbound delivery but sometime i forget to delete on or two inbound delivery, so some purchase order don't show the pending qua
-
Hi, I am completely panicking. I downloaded Mozilla, then Firefox and then Firefox theseauraus yesterday. Following that the other users could not access their applications, they seemed to be deleted, although my account was fine. I then tried the Di
-
Macbook pro and time capsule run hot
How hot should the laptop be getting? It only does this intermittently and more so up by the speakers, and the speakers are not always running. The Time capsule is on all the time and is hot all the time. Not so hot as to melt the plastic etc but I w
-
Aperture 3 - Can't send images to Photoshop CS3
When ever I try to edit images within Aperture 3 using photoshop CS3 I get the following message: *Editing Error This image cannot be rendered for editing because Aperture does not support the image format.* So far I have updated Aperture to 3.0.1, I