Excel 2007 "Hang" issue when copy/pasting.

Hi.
I have a user, using terminal services from a HP thin client. The server is a Windows server 2008 R2 SP1, Office 2007 SP3. The user is trying to copy from a IBM access session into Excel, sometimes the Excel will hang, an needs to be forcefully closed down
using the Task Manager. I have made sure that the IBS Access is using the clipboard function on the server. Other users can copy/paste from this program without any issues. The server is fully updated and the office pack also.
Any suggestions on where to start?
Regards Martin

Hi Martin,
Thank you for posting in Windows Server Forum.
Thus from your description it seems that particular user is facing the hangs issue, please correct me if there is anything misunderstand from my side.
Does this happens for all Excel file with that user?
Please try with RDP 8.1 for user and check the result. Please check the network connectivity is good. As user is copy pasting from IBM session it can create a little delay with file size or corrupt Excel file. The issue might also appear because the size for
Excel sheet would be very high and thus during the logon time it will take a long time to open. Also it may take into hang issue for the users. In addition also check below link for information.
What can cause slow copy and paste in Excel?
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2011/09/08/what-can-cause-slow-copy-and-paste-in-excel.aspx
Hope it helps!
Thanks,
Dharmesh

Similar Messages

Excel 2007 Formatting Issues When Making PDF

Running Excel 2007 on XP Pro. When I make a pdf file from an existing Excel file in Excel 2007 (originally created in Excel 2000), a lot of the formatting changes. Cells that were aligned to the center are now aligned to the top or bottom with no rhyme or reason.
I would hate to have to go through and fix all the alignment problems in Excel 2007.
Any suggestions or has anybody else had this problem?

Not so much Excel (or, at least not so much that I remember) but I've read a
LOT of messages about problems with Word'07
You might want to check and make sure you have all MS Office updates installed, to fix any known bugs... plus make sure your version of Acrobat is fully up to date
Acrobat Updates Here - Updates are NOT cumulative, so install in number order
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows

Can't shown chinese text when copy & paste data from server to Outlook, Word & notepad, etc.( Office 2013)

Can't shown chinese text when copy & paste data from server to Outlook, Word & notepad, etc.( Office 2013)

Hi
As per the information and details provided by you, when you copy & paste a data from server to Outlook, word, notepad, then you do not receive the Chinese text.
For Outlook, please follow these steps: -
Close and reopen Outlook in your western locale (or switch the windows system to your Western locale if you changed that),
Manually change the message from Western to Chinese encoding, which you can do in all versions up to Outlook 2007.
If you want to stay in your Chinese locale in Outlook 2007, then:
After you hit reply, go to the Option tab > More Options.
In the Encoding drop-down menu, select the Chinese encoding you are working in (Not the encoding used by the person who will receive the message)
Note:
To set the Chinese locale in all versions up to 2007 the controls are under.
Tools > Options. In Outlook 2010 File tab > Options > Advanced > International options.
Unicode (UTF-8)
is a good setting for multilingual users.
Check the
Auto select 2007)/ Automatically select (2010) encoding box.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

CR duplication when Copy/Pasting text from a JTextArea

I have a typical scenario of having text in a JTextArea. When I select some of that text and try to paste it either to an external text editor or even in the same JTextArea, I am getting extra line spaces in the screen.
For example, if I have the following text:
<a id=1>
<b/>
</a>When I copy paste it, I get:
<a id=1>
<b/>
</a>When I looked to see what characters were being used for the CR, I see "\r\n". This is the standard line.seperator for Windows OS which is fine. When I save this text to a file using the Java I/O libraries, it is fine (no extra lines). But when copy/pasting it prints extra lines.
Has anyone had similar problems?

Has anyone had similar problems? No. How are you doing the copy/paste? Did you write your own routines or are you using the default Actions. By default, when a Document is loaded it will convert the "\r\n" end of line string to "\n" and store the single character in the Document. When you use the getText(..) method the enod of line string will be expanded to "\r\n" on a Windows system, but this should not happen in a copy/paste operation. How do you add data to your text area?
This section from the Swing tutorial on "Text Component Features" has a working example of using copy/paste:
http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html

Formatting issues in sharepoint 2013 when copy/paste from word document

Hi,
When we copy/paste content(rich text, tables, styles) from a word document to SharePoint site whole formatting is messed up.
is this the limitation of SharePoint 2013?
Thanks,
Shiva.

Hi Shiva,
Some styles for font of rich text aren't be kept when I copy the content from Word 2013 and paste into a wiki page from SharePoint 2010/2013(even SharePoint 2007 like this
post) site as same as yours, it looks like a limitation.
As a workaround, we can publish the Word content as a Blog article in SharePoint site, then copy the content from the blog page to the needed SharePoint page, it will keep the rich text content format, you can have a try.
http://plexhosted.com/billing/knowledgebase/274/How-to-publish-a-SharePoint-blog-article-via-Microsoft-Word-2013-SharePoint-2013.html
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Strange characters when copy/paste from Word

Hi,
I have in Word u2018hellou2019 and when I paste it in the Notes of IR and save it, it turns into 018hello 019 so the apostrophes transform into these strange characters.
I checked with Notepad, Excel and Wordpad and this issue does not occur, only for Word.
Do you know why this happens ?
It should be a Word/IE setting as this issue does not occur on a Terminal Server. Only on usersu2019
workstations.
Thank you
Edited by: Mihai Olaru on Nov 1, 2008 2:43 AM

Hi Shiva,
Some styles for font of rich text aren't be kept when I copy the content from Word 2013 and paste into a wiki page from SharePoint 2010/2013(even SharePoint 2007 like this
post) site as same as yours, it looks like a limitation.
As a workaround, we can publish the Word content as a Blog article in SharePoint site, then copy the content from the blog page to the needed SharePoint page, it will keep the rich text content format, you can have a try.
http://plexhosted.com/billing/knowledgebase/274/How-to-publish-a-SharePoint-blog-article-via-Microsoft-Word-2013-SharePoint-2013.html
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

IWork(Keynote, pages and numbers) doesn't work well about the issue of copy & paste problem

I think so, too. the Keynote 6.5 is not working well on Yosemite (Mac OS X 10.10.1).
In my case, I can't copy & paste from some program(particularly analysis program in my case) to Keynote.
So, when I check coping & pasting the graph or image and so on to Powerpoint and other programs (one of Office is such word and 3rd programs), It works well. However It doesn't work at Keynote, page and numbers.
Also, I tried to do the following process to solve this issue
======
Something is wrong with your installation of Keynote
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1 delete all the iWork applications if you have them, not just Keynote by using AppDelete.
2 restart the Mac;   Apple menu > restart
3 immediately after the start chime, press the shift key until you see the Apple symbol.
         let it fully boot up, it will take longer as the OS is repairing the drive
4 when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and      click repair disc permissions
5 when complete, restart the Mac normally
6 install Keynote from the Mac App Store
====
It doesn't work! Anything doesn't change.
In conclusion, I didn't solve this yet!
Plz, solve this problem or fix it!.

This is a double posting, please only post in one discussion at a time.
Keynote 6.5 is stable and reliable under Yosemite for most users.
As with all new operating systems and applications, a small number of users find a few problems.
Copy and pasting text from and into Keynote from all the applications I have, work perfectly: the applications include; Safari, Mail, Word, PowerPoint, excel, Pages, Numbers, iMovie, Photoshop, InDesign, Illustrator.
If you want to place graphics into Keynote, use one of the following methods:
Insert > Coose
click the media button on an image placehoder
click the media button on the tool bar
drag and drop from a Finder window
Copy and pasting images into Keynote is not supported

Dates change from Numbers generated xls file when copy/pasted

I've saved a Numbers '09 file as xls and sent it to an Excel 2003 for Windows user. The file looks great when they open it in Excel 2003. But, when they copy and paste data into a different Excel 2003 file, the date changes about 4 years, which seems to make this a 1900/1904 issue. But why? If Excel 2003 opened up the original xls file generated by Numbers ok, why can't the dates be copy and pasted into another Excel 2003 spreadsheet?

Apple uses a year pattern that starts with the first day of the first leap year in the 20th century.
Microsoft originally adopted a year pattern that began with the first day of the last year of the 19th century (1900) which, although it was a year divisible by 4, was not a leap year.
Later, MS added the 1904 start pattern, but kept the1900 start pattern as well.
What is likely happening in the case you describe is this:
When Numbers traslates the document into Excel format and saves it, Numbers apparenly includes the flag that tells Excl 'use the 1904 start for dates.' Excel open the file, reads the code, and sets the calendar accordingly.
When the Excel 2003 user then copies the data frm that document, the copy picks up only the date serial number(s), and does not get the coded flag identifying which date system is in use.
That data is then pasted into the new Excel document, and with no flag to tell it different, Excel uses its 'normal' setting—the calendar starts on January 1, 1900—and all dates are interpreted as being four years earlier than they were in the original Numbers table or in the first Excel sheet.
I'd assume there is a setting that can be changed in Excel. Where to find it/how to use it would be a good question for an Excel community discussion site. (Although it's possible an answer might arrive here as well.)
Regards,
Barry

How do you keep strokes, etc, from changing when copying & pasting?

I am sure there is a simple solution to this problem, but I cannot figure it out and could use some help. I have a graphic in one InDesign document (ID CS4 - using Windows XP Pro) and when I try to copy and paste it into another ID doc, it completely changes the strokes and fills. It usually does the opposite of what is in the graphic (this happens with every graphic I try this with). So if I have a circle that is stroke only, when I copy and paste it, it comes in with no stroke and a fill. I have to use these graphics between documents frequently and some of them are complicated, making it difficult to spend the time correcting this problem. When I tried adding the graphic to a library, it did the same thing. It also changed it when I moved one page to another document. Anyone have any ideas why this might be happening and how to make it stop?
Thanks,
GS

Thanks for the reply. While it wasn't the preferences, I did find a link on the link you included in your answer that led me to the solution.
The problem was conflicting object styles. The solution was to load the object style from the doc that included the graphic into the doc that I wanted to place the graphic in. Then when I copy & paste, the graphic comes in perfectly. The only problem is if there are other graphics in that doc, but now that I know there is an issue with object styles, I can pay attention to it as I design.
I can always count on the forum for great answers!
GS

Hyphenation issues when copying from word document

OS X Mavericks / Indesign CC2014
I'm having an issue copying & pasting text from Microsoft Word into an Indesign document. Mainly happens with copy in foreign language (in my case Spanish & Polish). If I copy a block of text with a hyphen in it, the hyphen comes over as a character (like a manually inserted hyphen) and stays with the copy, even in the middle of a paragraph. If I select all of the copy in Word, then turn off hyphenation, I don't have the issue as all of the automatic hyphenation is removed. But sometimes I forget...
Any thoughts on why this occurs - don't really notice it happening with English copy.

What happens when you place the same block of text instead of copying & pasting? Sometimes I have to do some pretty extensive file massage (conversion to other formats, opening those other formats in OpenOffice, etc.) to get multilingual stuff to work at all.
Word's handling of hyphenation is odd, and I don't trust the clipboard. If you're using Word files supplied by third parties (which seems likely) you could have files from a variety of platforms and versions in play. Maybe somebody inserted Optional Hyphens in these languages?
There's a preference for "Clipboard Handling" that will let you choose whether you're pasting raw text or rich text

Slightly distorted aspect-ratio (and missing alpha channel) when copy/paste from Photoshop

Maybe this is an old topic (but I didn't find anything on google or this forum):
When I copy images from Photoshop to Flash, the aspect ratio of the bitmap gets distorted. A 728x90 Bitmap becomes 727.6x90 (and so on...). The dpi is set on exactly 72 on both programs. Is there any way to JUST get a 1:1 pixel copy? (except using another program like Irfanview as a "man-in-the-middle")
Although I selected "32 bit color w/alpha" in the clipboard settings of Flash, the alpha channel seems to get discarded when copying from Photoshop. Shouldn't it at least work with Photoshop? I mean, it's an Adobe product after all and maybe the most commonly used together with Flash.
Would just be nice if a copy-paste between PS and FL was an easier thing.
I know there can also be a pixel-aspect somewhere (like used for video productions and wide-screen), but I didn't find settings for that anywhere.
I still use Flash Professional CS5.0

I'm on windows7 with CS5.5 and transparency and size are copied over just fine. You answered what would be my first question, 72dpi. How about the image mode. Are you using RGB 8bit?
I've had lots of issues with the OS not handling transparency very well also, such right-click on an image on a website that you know is a PNG and has transparency, then paste it into photoshop, the transparency isn't saved.
The route that always works (but is a PITA) is of course to save it as a PNG with transparency and just import it.

Can't get Typekit to work with localhost (also, another weird issue with copy+paste)

Hi!
I've searched through the other posts already, and I *think* I've tried all the solutions, but I still can't get the typekit fonts on my machine.
I'm trying to use the "orator-std" font. In the "kit editor", in the "kit settings -> kit settings" tab I have for name "localhost" (w/o quotes) and for domains just "127.0.0.1" (w/o quotes).
Then (AFTER saving the settings from that tab), I go back into edge animate, I start a new font by clicking that + sign next to "fonts", in the "library" tab. I set the "font fallback list" to ' "orator-std",sans-serif ' (w/ quotes, w/o single quotes), and then go back to the open browser and go to the "embed code", copy both lines of javascript, go back to edge animate, and... nothing. It won't let me change ANY text in this box anymore after the window loses focus. I have to press "cancel" and try again. So this time, I just type in the orator-std... blah blah, same as last time, but paste in the code successfully as it was already in the clipboard and I didn't need to make the window lose focus. Okay, so I click "Add font", and apply the font to my text. Nothing happens.
Huh... well the "Font's from T" picture is showing up in the bottom right of my screen, so that's odd. I go to preview in chrome, still ugly old sans-seriff there, also with the "Font's from T" logo in the bottom right.
I figure "okay, probably just takes a second... or a minute... or w/e like the message said." Well this was at least an hour ago, so something is still wrong.
I would love to just delete the font and start from scratch... maybe something got screwed up along the way and it would fix things to just start from scratch. Well... "sorry" says edge animate... can't let you delete that! In the "libarary" tab, there's only one font visible, it says "orator-std,sans-serif" (w/o quotes). If I right click it, the only option is "delete" and it's greyed out.
I tried doing one with arial instead of sans-serif just now, still not working, but everything shows up in arial now instead of sans-serif... so that's something I guess.
Apologies if this is just a simple problem that I'm just somehow not grasping. Please accept this legitimate bug report as payment... the er copy paste bug, I mean...
Thanks!
Trevor

Hi Trevor,
I'm sorry you ran into trouble here. Typekit can be used locally. However there are some necessary steps that if left out, will cause the fonts not to render. In order to use Typekit locally, you've got to:
1. Be running a local server when testing your site in the browser. You can tell if you're running a local server by the URL of the local site. If it starts with: file:// then you are just viewing the local file in a browser and not running it from a local server.
If the local URL starts with: http:// then you're running a local server.
2. The domain of your local server has to be part of the domain list in your Kit. So, if your local server uses: localhost, you'll need to add this to your Kit's domains.
I hope this helps. If you have any further questions, feel free to reach out to us directly: [email protected]
Cheers,
Benjamin

Garbled text when copy-pasted from a pdf document in Preview

I have this PDF document which I created in NeoOffice. When I copy some text from it, then paste it somewhere (or just go to Finder>Edit>Show Clipboard) I see garbled text. Or, if I go into the search field within Preview and type a word which I know exists in the PDF, it doesn't find it. But if I copy-paste it from the PDF document window into the search field, the copied term appears garbled in the search field itself, but I do get search results.
This happens only with this particular document, which I myself produced. No password/encryption or anything weird; just a straightforward print job from within NeoOffice.
Any clues? Many thanks.

happens to me all the time in preview, copying something that I need to paste, like a URL. Quitting and relaunching usually solves it, but now that won't work on the text I am copying today.

OS X Maverick mail crashes when copy/paste mail in draft

When I send the same email to several persons I usually make a draft, save it and then copy/paste that draft. Now when I do that the mail client crashes - every time. Why? I have tried to update what I can but still it crashes. In need of URGENT assistance

When I send the same email to several persons I usually make a draft, save it and then copy/paste that draft. Now when I do that the mail client crashes - every time. Why? I have tried to update what I can but still it crashes. In need of URGENT assistance

Retaining SFX and music when copying/pasting one project to another

I noticed that when I tried to copy/paste one project into another, the video makes it, but any added sound effects and background music do not get brought along.
Does anyone know how to override this, so when I copy and paste the project, the SFX and music get copies and pasted, too? Thanks.

I spoke with AppleCare and they said this is not possible.

Excel 2007 "Hang" issue when copy/pasting.

Similar Messages

Maybe you are looking for