Excel 2010 is very slow at inserting automatic subtotals. How can I resolve this?

How can I resolve this?

In addition to Mr Oskar's Suggestion..
Basically inserting subtotal is adding rows for each group and inserting formula for SUM,COUNT etc.If your data has many rows obviously that will take more time.You may try once with PIVOT TABLE
Best Regards,
Asadulla Javed, Kolkata
Please do not forget to click “Vote as Helpful” if any post helps you and
"Mark as Answer”if it solves the issue.

Similar Messages

The date and time on my iPhone 5s is incorrect when I select Set Automatically. How can I resolve this?

My iMessage and FaceTime, among other apps, are unable to activate for some reason. Other forums have suggested I make sure my date and time are correct and are Set Automatically. I noticed that the time zone, date, and time are all incorrect. Any suggestions??

I'm sorry this is happening, loucm. When did this start? Please try resetting Network Settings. You can go to Settings>General>Reset>Reset Network Settings
Please keep us posted.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

I have about 97% directoryservice cpu usage, 55% cpu usage, high temps and fan speeds with very minimal activity on my macbook, how can I resolve this?

Recently my computer has only been showing 42% idle when im doing absolutely nothing on the computer, i'll only be browsing the internet. Even when I shut down programs such as drop box, skype, itunes, etc. When I check activity monitor the only process that is using over 5% is directoryservice, and it is usually sitting between 90-99% usage. I downloaded istat which is showing my cpu temp at 77 degrees and fan at 4000 rpm. If I watch a youtube video it will kick into 6000 rpm. Please tell me how I can resolve this issue!! When I restart the macbook it seems to work for about 10-20 minutes where I can browse with ~90% idle and ~2000 rpm.

I discovered this issue independent of this thread, and can confirm that killing KiesWifiAgent will instantly take care of DirectoryService's high CPU load. You'll also free up a bunch of memory. On my MBP (8 GB RAM), Kies had leaked its way to consuming 1.5 GB of memory.

My mac mini is running very slow all of a sudden, how can i restore it's speed?

my mac mini is running very slow all of a sudden, how can i restore it's speed?

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=`ls /L*/L*/Dia*/*.panic | wc -l`; Ps "Panics"; o=`ls /L*/L*/Dia*/*.c* | tail`; Pm "System crash logs"; o=`ls L*/L*/Dia* | tail`; Pm "User crash logs"; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(egrep -v '(local|broadcast)host' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in {0..1}; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem.

My mozilla does't opening new tabs & I am having very problem with my work due to this.Please tell me how can i resolve this problem

The Ask Toolbar is causing that in the Firefox 3.6.13 version. Evidently something in that extension isn't compatible with a Firefox security fix. Disable that extension or un-install it.

Hi this is alamzeb , i have purchased OS X mountain lion from apple store and installed it on my macbook with the expect ion of making my macbook faster but it become more slow by installing os x , how can i solve this problem

Hi this is alamzeb , i have purchased OS X mountain lion from apple store and installed it on my macbook with the expect ion of making my macbook faster but it become more slow by installing os x , how can i solve this problem

alamzeb wrote:
Hi this is alamzeb , i have purchased OS X mountain lion from apple store and installed it on my macbook with the expect ion of making my macbook faster but it become more slow by installing os x , how can i solve this problem
Have a read under the threads on the Right hand side of this page under 'More Like This'
Pete

I open safari and one site takes me to their app in the store automatically. How can I prevent this?

I open safari and one site takes me to their app in the store automatically. How can I prevent this?

some sites that use flash (or other issues) dont want you trying to view the site in your browser on an ios device, because they know it will not be a good experience - they detect your device, and if it is an ios device they want you to use their app instead of your browser.

FlasCC compiled swc library is very slow on first function call - how can I speed it up?

Hi everyone,
I have a C++ library that fits a mesh onto images of faces, now compiled into an swc.
I have just exposed one function from the library, that operates on a BitmapData and returns a Vector of Points indicating various parts of the face.
The problem is that the first call to the library (to process the first image) seems to take about 10 seconds. After that repeated calls take a fraction of a second.
Is there any way I can improve the performance on the first call, by initialising my library class in an init method or something? In the target application most users will only call the library once, so I need to improve this.
UPDATE: Profiling in Flash Builder, the [verify] action (which I understand is JIT bytecode verification) takes 10.1 seconds. The other main culprits are [avm1] (1.7s) and global$init.global$init (2.0s).
Can this be normal behaviour that JIT verification takes 10 seconds? Or can I speed it up? The source C++ code is probably 100,000 lines because it includes several modules from OpenCV, however so does Alex Mac's OpenCV demo and it doesn't take this long.
Below is the code for my library wrapper. Very grateful for any help!
#include <AS3/AS3.h>
#include <AS3/AS3++.h>
#include <Flash++.h>
#include "FlashCLM.h"
using namespace AS3::local;
// First we mark the function declaration with a GCC attribute specifying the
// AS3 signature we want it to have in the generated SWC. The function will
// be located in the com.FrameFish namespace.
void fitCLM() __attribute__((used,
          annotate("as3sig:public function fitCLM(img:BitmapData,shape:Vector.<Point>):int"),
          annotate("as3package:com.FrameFish"),
          annotate("as3import:flash.utils.ByteArray"),
          annotate("as3import:flash.geom.Point"),
          annotate("as3import:flash.display.BitmapData"),
          annotate("as3import:flash.Vector")));
void fitCLM(){
          AS3_Trace("fitCLM starting");
          // Copy pixels to C ram
          inline_as3(
                    "var ba:ByteArray = img.getPixels(img.rect);\n"
        "var imgPtr:int = CModule.malloc(ba.length);\n"
                    "ba.position = 0;\n"
                    "CModule.writeBytes(imgPtr, ba.length, ba);\n"
    uint8_t* pixels = 0;
    AS3_GetScalarFromVar(pixels, imgPtr);
          // Get the width and height of image
          inline_as3(
                    "var w:int = img.width;\n"
                    "var h:int = img.height;\n"
          int width, height;
          AS3_GetScalarFromVar(width, w);
          AS3_GetScalarFromVar(height, h);
          // Fit CLM
          ff::FlashCLM clm;
          int shapeSize = 58*2; // Size of the imm_face_db markup
          int* shapeBuffer = new int[shapeSize];
          int result;
          clm.fit(pixels, width, height, shapeBuffer, &shapeSize, &result);
          // Copy shape to as3 shape vector
          if (result == ff::FlashCLM::FOUND){
                    for (int i=1; i<shapeSize; i+=2){
                              inline_as3(
                                        "var x:Number = %0;\n"
                                        "var y:Number = %1;\n"
                                        "var p:Point = new Point(x,y);\n"
                                        "shape.push(p);\n"
                                        : : "r"(shapeBuffer[i-1]), "r"(shapeBuffer[i])
          // Clean up C memory
          inline_as3(
                    "CModule.free(imgPtr);\n"
          delete shapeBuffer;
    // return the result (using an AS3 return rather than a C/C++ return)
    AS3_Return(result);
int main(){
    // We still need a main function for the SWC. this function must be called
    // so that all the static init code is executed before any library functions
    // are used.
    // The main function for a library must throw an exception so that it does
    // not return normally. Returning normally would cause the static
    // destructors to be executed leaving the library in an unuseable state.
    AS3_GoAsync();

I never did get to the bottom of it. I got this response from Alex Mac:
It's hard to give good advice at the C++ level because the problem is more
of a code generation issue. When a function ends up requiring too many
registers to be live at once the resulting AS3 code can in some cases cause
the verifier to take a long time to run. Exception handling and
setjmp/longjmp can contribute to this, but so can things beyond your
control when LLVM inlines too much into a single function and ends up
generating unreasonable code...
In the end I moved most of my C++ code out of flash and on to a server. To
me flascc was a nice idea but didn't live up to the hype

Video inserted in Keynote has no sound on iPad Air, how can I resolve this?

I have saved a video from iMoves to my camera roll on my iPad Air. It plays fine in both programmes. Only when I insert it into a keynote presentation does it play with no sound. Can somebody help me resolve this please?

Try this. Settings>Safari>Clear History, Cookies and cache (data in iOS 5) then restart the iPad. If that doesn't help, look here for more tips.
http://support.apple.com/kb/TS3694#error1004

I want to put my wifi password in for internet but mac automatically connects, how can i stop this?

So I connect to my wifi automatically, but recently I simply want it to ask for a wifi password instead of automatically connecting because other people use this MacBook also...

Doesn't each user have a login with a different password.. the login on the Macbook itself is much more important than the wireless login.
You should be able to set the Airport or wifi to not remember the password.
Untick remember the network.. clean them all out of the airport settings and start over..

My Macbook Pro 2010 is very slow, I know its old but can I speed it up?

I have had my Macbook pro for nearly 4 years so I expect it to have slowed down, but now its getting ridiculous and difficult to use. Does anyone have any ideas on how to speed it up? I have removed all my larger files and the most memory is now take up by my music on I tunes. Aside from buying a new one which I would love to do but cant afford can anyone offer any suggestions to speed it up?
Thanks.

I have a MacBook Pro Mid 2010 Model.
My machine is working better than ever since I installed an 8Gb RAM Upgrade and Upgraded the HDD only yesterday. My drive had developed an error and was causing it to be very sluggish. I posted this somewhere else a little earlier:
Quote:...
My Mid 2010 Macbook Pro was getting sluggish even after installing 8Gb of RAM sometime ago. During a verbose boot I noticed an I/O error on my primary drive. Rather than mess about trying to determine exactly why I did a quick search for sensibly priced standard disk drives. Large SSD's are out of my price range so I opted for a 1Tb Seagate Momentus XT Hybrid SSHD which is a standard drive with 8Gb of high quality flash built in.
I swapped out the old drive and put it in a USB Caddy, installed the new drive, blew out all the dust and debris while doing so and reassembled. Booted into recovery from the old drive and reinstalled OSX Mavericks and then left the system to recover my files from the old drive.
WOW!! What a difference!... The read/write is around 100Mb/s. Thats near twice the reading from the original MacBook drive and with the added flash on this new Seagate the boot up time is near the speed of SSD. These Seagate Hybrids are a little more expensive that the regular... but very well worth it.
Kevin

My new Macbook pro is running very slow especially with photoshop. How can I speed it up?

Hi there,
I just bought my Macbook Pro two weeks ago specifiacally to use Photoshop CS and Lightroom together. It worked fine for the first few days but
has slowed down considerably since then. I live in Taiwan which makes it difficult to go to a store to have it finxed due to the language barrier
so online help would be fantastic! If the problem continues would it be possible to exchange it for an Air (if that's a wise choice?)
I look forward to a quick reply!
Thank you
Candice

Hi Clinton,
Thanks for that super quick reply!!
I wasn't expecting this to happen with my new computer! However photoshop and lightroom are running ridulously slowly, even while scrolling through pictures the beachball appears!
Ill give you some information that may help you understand this problem better.
%CPU
Flash Player Safari internet plugin 5.3
% User 2.75
% System 3.37
% Idle 93.38
Page out - 6.36 GB
Swap Used - 6.75 GB
Would you like the system log and kernel log too?
Thank you for your help!!
CC

When downloading a file is completed, it is automatically opened, how can I stop this behaviour?.

Every time I download a file (documents, audio, etc) Firefox for android automatically opens the file when the downlod is completed. This is relly annoying when I want to open it at a later or when I want to downoad a lot of files. Is there is any way to stop it from automatically opening downloded files?

This will change in Firefox 25.

After recently updating Firefox through the automatic updater, I can no longer load any websites in Firefox. How can I resolve this?

IE loads websites fine. I have tried all the suggestions from the articles of the knowledge base including checking proxy settings, editing about:config and starting in safe mode; none of which have resolved the problem.

Forgot to mention the online version of the Flash Player Installer is now affected as well. I could not update flash player using it and had to download the offline installer.
This makes me wonder whether it still is a firewall or even a router issue, but like I said I tried the re-adding as an exception in the firewall method and having not changed anything with my router I don't see why that would be an issue.

After upgrading to 10.8.5, my laptop converts all uppercase letters to lower case automatically. How can I fix this?

I can only get the uppercase to "stick" by going back, highlighting, and changing. This is incredibly problematic for typing any work-related material. help!

Okay - this issue seems to have resolved on it's own. Yea!
I did find a thread that suggested resetting the PRAM/NVRAM so I did this, restored the external monitor to factory settings and went into Disk Utility and repaired disk permissions and verified disk permissions.
Here is a link to reset the PRAM/NVRAM: http://support.apple.com/kb/HT1379
These things may have helped resolve this issue. I can't tell what worked because it was hours after I did all these things that my monitor and computer decided they liked each other again. If you have a similar issue, maybe these steps will help you resolve your problem too.
Hope this is helpful!

Excel 2010 is very slow at inserting automatic subtotals. How can I resolve this?

Similar Messages

Maybe you are looking for