Excel 2010 not enough system resources to display completely

I have searched the web high and low for an answer to this issue we are having with one user who uses Excel 2010 quite extensively and I have not been able to find an answer that resolves the issue.
She keeps getting the error message "Not enough system resources to display completely." The spreadsheet in question is a simple two worksheet file that she does simple calculations on. Her PC is an HP Elitebook 8560w (only 1 month
old) with an i7 Intel processor, 8GB RAM, 500GB HDD with over 300GB free, Windows 7 Professional (64-bit) with all the latest patches and updates & Office 2010 Professional (32-bit). The video and printer drivers are all update to the latest versions.
The spreadsheet is one she has used before on her older Windows XP Pro SP3 desktop with no problems. We have tried the "set the Zoom to 100% or less" resolution that has been mentioned all over the web and it does not work.
We are still having this issue. Does anyone know how to resolve this in Excel 2010. I have seen the "solutions" for Excel XP, 7, 2000, 2003 and 2007 and they don't seem to work, or at least the ones I have tried! :-)
Would welcome all serious suggestions. Mahalo Nui Loa!

I've had this problem on several computers on our network. I found various recommendations, but no solid answers. I have resolved this problem on two computers with
just the first steps performed. The third computer require also following the step highlighted in yellow below:
Deleted all temp files by:
Start > Run > enter %temp% in the search box and press Enter
Delete everything from this folder
Cleared Recent Docs List & Lower Number Displaying:
File > Options > Advanced > Scroll to Display category > change number of recent documents. To clear the list, set this to 0 and save. You can adjust up after that if you choose.
Delete files from the following folders:
(may have to view hidden files – top corner drop down > folder options > view tab > Hidden files and folders > select Show hidden files, folders and drives.
Local Service:
%windir%\ServicesProfiles\LocalService\AppData\LocalLow\Microsoft\CryptnetUrlCache\Content
%windir%\ServicesProfiles\LocalService\AppData\LocalLow\Microsoft\CryptnetUrlCache\MetaData
Network Service:
%windir%\ServicesProfiles\NetworkService\AppData\LocalLow\Microsoft\CryptnetUrlCache\Content
%windir%\ServicesProfiles\NetworkService\AppData\LocalLow\Microsoft\CryptnetUrlCache\MetaData
LocalSystem:
%windir%\System32\config\systemprofile\AppData\LocalLow\Microsoft\CryptnetUrlCache\Content
%windir%\System32\config\systemprofile\AppData\LocalLow\Microsoft\CryptnetUrlCache\MetaData
The above process worked to prevent this problem on two machines, but not another. On the one that this didn’t work, I also
Start > Programs > Windows Update > View Update History. Look for KB# 2597166
If it exists, click it and uninstall.
Can also try, though I didn’t. I may do this first, but I didn’t feel this was my issue.
Control Panel > Add/Remove Programs > Select Office > Change > Run Repair

Similar Messages

Not enough system-resources to finish required-service

Hi,
I have developed a backup-program, using java.util.zip package.
When I applie this program to zip a file greather than 100Mo, an OutOfMemoryError occurs.
So, I try to call the JVM with Xms and Xmx parameters set to 512Mo:
java -Xms512M -Xmx512M ClassName
Then, my program crash on the following exception:
java.io.IOException: Ressources syst�me insuffisantes pour terminer le service demand�
(Translation: "Not enough system-resources to perform the required-service")
My workstation is equiped of 512Mo-RAM for an Athlon 1000MHz under Win2KPro 5.00.2195 and I using Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.0-C) - Java HotSpot(TM) Client VM (build 1.3.0-C, mixed mode)
The memory-usage after the Exception-evenment is 112Mo,
the maximum-memory-usage is 216Mo,
the virtual-memory-usage is 532Mo,
Is it an another way than increasing physical-memory of my workstation to contain my JVM ?
Thanks beforehand for your replies.

You create (write) an archive I suppose.
I wrote a little web-server in Java which serves the requests on the basis of the zip archives listed in its configuration. That is, it lets us browse inside several zip archives with a browsers without having to unpack them. I use this thing on my PC against a couple of complete Java SDK documentation packages etc. The total size is above 150MB (megabytes, or, si vous pr�f�rez, megaoctets). The thing runs without memory options without problems for a week (I usually shut the box down for the weekend).
The bottom line: with reading the archives I encounter no problems with the java zip package.

"Not enough system memory" when there is?

Hi,
Yesterday I had a screen freeze and did a forced restart. After that I've been having a problem that will not go away, altho I have run Disk Warrior and Disk First Aid.
When I try to launch applications I'm sometimes getting an error message saying: "There is not enough system memory, please close an application, etc."
The puzzle is that I have plenty of free available memory when I'm getting this message. It also seems to jump between applications. First I couldn't open Word. Now Word launches but I can't open Internet Explorer, altho Mozilla launched okay. Re-starting and running Disk Warrior didn't help. I don't get it. What else should I do?
Thanks much!

Hi, Paul -
Is it possible for it to change itself during a mishap (freeze)?
It's just about impossible for that to happen. When a program's memory allocation settings are changed, the new numbers are not entered in an external document like most prefs setting. Instead, it changes a bit of the code in one of the resources in the program itself (judicious use of ResEdit will reveal this). For just that particular piece of code to be altered in an acceptable way as the result of a freeze is nigh impossible.
However, there is a utility program named Reaper whiuch will make such changes with no input from the user. Its purpose is to automatically change the memory allocations for programs based on perceived usage and need. Unfortunately it will make such changes according to its logic, which is not constrained by the logic of the user.
Check to see if Reaper has been installed. It uses a control panel as a user interface; not sure what the name of that control panel is, but it may be Reaper. If you find it has been installed, try deactivating it.

Not enough available resources

I bought a Satellite A665-S6050 last month. I set up the computer and allowed the battery to charge, etc. After I used it the 2nd day, I logged off instead of shutting down. When I came back and clicked my user name, the computer had a message that said "not enough available resources, cannot log in as a new user and it told me to use a user that was logged in. I am the only user right now. So of course I hit ok and it brings me back to my user id and when I click it again, I just keep getting the same message. So I have to manually shut down the computer and reboot. When I reboot I of course get the message that Windows did not close properly, etc. etc.
Would resources be the "hard drive"? this is a brand new computer that has 4 gig 500 m - how can there not be enough resources? If anyone has suggestions please let me know.

Satellite A665-S6050
I logged off instead of shutting down. When I came back and clicked my user name, the computer had a message that said "not enough available resources, cannot log in..
I suspect a glitch in a Toshiba program that's being loaded along with the desktop. Maybe left in memory and reloading it doesn't play well. Possibly leaks gobs of memory and runs out. Whatever..
See if you can identify the culprit this way.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
-Jerry

Excel 2010 not using the default print settings

Currently got an issue with Excel 2010 not using the default print settings for a couple of users on our network,
basically when pressing cntrl P or selecting the print option from the file menu the printer settings are different to the print settings selected in the devices and printers menu, we have checked the print drivers etc but this has still not resolved the
issue, all other office programs are fine and also other users are reporting this issue more and more with different printers,
tried restarting print spooler service and re-installing office but this has come to no avail,
any ideas would be much appreciated!

Hi,
This issue occurs because the Page Setup settings that you specify in your file override the settings that you specify in the printer driver properties.
To work around this issue, do not specify the paper size, page orientation, or page margins in the printer driver properties. Instead, specify these settings in your workbook.
To specify these settings, follow these steps:
1.Start Excel, and then open the workbook you want to change.
2.In Microsoft Office Excel 2010, click the sheet that you want to print, and then click the Page Layout tab. In the Page Setup group, click Page Setup to open the Page Setup dialog box.
3.Click the Page tab.
4.Under Paper size, click the paper size that you want.
5. Click Options button and in Printing Shortcuts tab, in the Paper source area, perform one of the following steps: ◦If the printer can automatically select the correct paper tray to use, click Default tray in the First page list, and then click Default
tray in the Other pages list.
Default tray is the default setting in both of these lists.
◦If the printer cannot automatically select the correct paper tray to use, you may have to select the paper tray that contains the paper size that you selected in step 4.
To do this, click the appropriate paper tray in the First page list and in the Other pages list.
6.If you want to change the page orientation or its page margins, click the Finishing tab.
7.Select the options that you want.
8.Click OK.
9.Repeat steps 2 to 8 for each sheet of your workbook for which you want to specify settings.
Jaynet Zhang
TechNet Community Support

Insufficient system resources exist to complete the requested service

[I did intend to start this post with a screenshot of the above error when I initiate the transfer from Windows Explorer, but apparently 'Body text cannot contain images or links until we are able to verify your account.' so I will just have to do some typing,
viz the error dialog says:
'An unexpected error is keeping you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
Error 0x800705AA: Insufficient system resources exist to complete the requested service.'
I get this error pretty much 100% of the time from one particular PC when trying to copy a folder of 10 2GB files to a server with both mirror and parity storage spaces.
I recently purchased a Thecus W5000 running Windows Storage Server 2012 R2 Essentials. Absent any guidance either way I decided to set up a storage pool across the three 3TB WD Red drives that I have installed in it and to allocate 1.5TB of that space to a
mirror storage space and the remainder to a parity storage space. Having read some faily dire things about storage spaces, but wanting the resilience provided by those two types of storage space, I decided to run some benchmarking tests before finalising anything.
To that end I only went as far through the Essentials setup as creating a handful of user accounts before setting up the storage spaces and sharing both of them, with all authenticated users permitted full control. My benchmarking consists of a Take Command
batch file timing three large directory copies - one with 10 2GB files, one with 10240 10K files and another with a multi-level directory with a variety of files of differing sizes. The first two are completely artificial and the latter is a real world example
but all are roughly 20GB total size.
To test various aspects of this I copied the three structures to and then from a partition created on the internal disk (the W5000 has a 500GB SSHD) and to the two storage space partitions. I also created a version of the batch file for use internally which
did something similar between the internal disk and the two storage space partitions, and another as a control that tested the same process between the two Windows PCs. The internal test ran to successful completion, as did the PC to PC copy and the external
one from my Windows 8.1 64-bit system (i5 3570K, 16GB RAM, 1TB HD) but when I ran it from my Windows 7 Pro 64-bit gaming rig (i7 2600K, 8GB RAM, 1TB HD) I got a number of failures with this error from Take Command:
TCC: (Sys) C:\Program Files\bat\thecus_test_pass.btm [31] Insufficient system resources exist to complete the requested service.
(where line 31 of that batch file is a copy command from local D: to the parity space on the Thecus).
The error occurs only when copying large files (the 2GB ones already mentioned but some of those in the real world structure that are about 750MB in size) from the Win7 system to the Thecus and only when doing so to the storage space volumes - ie. copying to
the internal disk works fine, copying from all volumes works fine, copying internally within the Thecus works fine, copying between the Win8 and Win7 machines works fine and initiating the copy as a pull from the server between the same two disks also works
fine. One aspect of this that surprised me somewhat was just how quickly the copy fails when initiated from Windows Explorer - checking out the details section of the copy dialog I see roughly ten seconds of setting up and then within five seconds after the
first file transfer is shown as starting the error dialog pops up (as per the image no longer at the top of this post).
There are no entries in the event log on either machine related to this error and I've had the System Information window of the Sysinternals Process Explorer up and running on both machines whilst testing this, and it shows nothing surprising on either side.
I've also run with an xperf base active and I can't see anything pertinent in the output from either system.
Frankly, I am at a loss and have no idea what other troubleshooting steps I should try. The vast majority of the existing advice for this error message seems to relate to Windows 2003 and memory pools - which both the fact that this works from one PC but not
the other and the SysInfo/xperf output seems to suggest is not the issue. The other thing I've seen mentioned is IRPStackSize, but again if that was the problem I would expect the failure to occur where ever I initiated the large file transfer from.

Ff it works from the win 8 box, it must be in the win 7 box?
I'm going to answer this one first because much of the rest of this is not going to be pertinent to the problem at hand. I've been over and over this aspect whilst trying to think this issue through and you are right, except that it only happens when copying
files to the Thecus and only then when the target is a ReFS partition on a mirror or parity storage space. So the best I can come up with is that it is most likely an issue on the Win7 box that is triggered by something that is happening on the server side,
but even that is a bit of a stretch. This is why the lack of information from the error message bugs me so much - in order to debug a problem like this you need to know what resource has been exhausted and in which part of the software stack.
Now that may not be easy to do in a generic way, and since programmers are inherently lazy it is tempting just to return a simple error value and be done with it. However, I've been in the position of doing just that in a commercial product and ended up
having to go back and improve the error information when that particular message/code was tripped and I was expected to debug the problem! Obviously there is a significant difference between a Microsoft consumer product and a mainframe product that costs many
times as much and comes with a built in maintenance fee, but the underlying requirement is the same - somebody needs to be able to solve the problem using the information returned. In this case that simply isn't possible.
You spend your time testing file copies, where I devote most of my time to backup and restore
I don't really want to be testing file copies - the initial intention was to benchmark the different storage space and file system combinations that I was intending to use but the error whilst doing so has spiralled into a cycle of testing and tweaking that
really isn't achieving anything. My primary reason for having a NAS at all has always been backup. My current strategy for the two boxes participating in this testing involves having a local drive/partition to hold backups, running a daily incremental file
copy to that partition which is then immediately copied to a NAS and backing that up with a regular (needs to be at least once per month to be totally secure) full image copy of the local disks that is also copied to the NAS afterwards (hence my fascination
with copying large files).
There is a weakness in that strategy because I've never been very good at performing that full image backup regularly enough, so one of the reasons for buying the W5000 was the possibility of making those backups automatic and driven from the server end.
However, that takes the local backup drives out of the equation and leaves me with the need to backup the NAS, which I don't do with my existing unit because there are (nearly) always copies held elsewhere.
The other reasons for going with the Thecus were a desire to backup the other machines in the household - I've always dreaded a hard drive failure on my wife's laptop but getting her to perform any kind of housekeeping is nigh on impossible and also to provide
a file server capability protected by a single set of userids (the existing NAS data is open to all household members). So my goal is backup and restore too ;)
I meant a different nic on the beast (win 7)
I should have realised that but obviously wasn't thinking straight. I don't have a spare gigabit NIC to hand (although perhaps even a megabit one might provide an interesting data point) although there is such a card in one of my other (less used) PCs that
I could cannibalise for testing purposes. Another project for the coming weekend methinks.
put some limits on it to keep the lawyers happy. 2gb ram, OS loaded on a drive, limit the # of Hard Drives
That statement got me thinking, because I've never been able to find a definition anywhere of what the restrictions are with WSS 2012 R2 Essential - if I bring up the software license terms on the box itself they are for 2012 Standard!?- and wonder whether
they'd stop me doing things like adding RAM or changing the processor.
Even my buddies at wegotserved do not seem to have done any hands on reviews and they get "everything."
The cynic in me wonders whether that is because Thecus know that they've just shovelled this onto a handful of existing boxes that barely meet the spec. and which simply aren't up to snuff as anything other than a box full of disks. The Thecus boxes
look like good value because they include the server OS (the unit cost me roughly 50% more than I could buy Windows Server 2012 R2 Essentials for) but if you can't realise that value then they are just an expensive NAS.
if perhaps the algorithms in the Seagate SSHD do not know ReFS?
I haven't put a ReFS partition on the SSHD, only on the three 3TB WD Reds.
I will ask my contacts at MS to take a look at this thread, but they stay so busy with v.next I don't know if they will spend many cycles on it
Perhaps you could ask them if the next version of the OS could do a better job of identifying which resources have been exhausted, by what part of the stack and where in the maze of connectivity that makes up a modern computing environment?? {gd&r}
Cheers, Steve

RDP session to 2012 R2 server comes up with "Not enough storage is available to complete this operation"

I've just set up two new servers in identical fashion which will be hyper-v hosts.
They both have Windows Server 2012 R2 Datacentre installed. 128GB of RAM and c:247GB free, d: 1.9TB free. Resources are not an issue.
Only role installed is Hyper-V on both.
I can RDP to one server without a problem but the other is complaining with the message above. The only option is to click OK and this exits the session. I can log in fine through the Drac card of the server.
I get terminalservices events 261, 1149, 40.
At this time I also get Desktop Window Manager event 9009 - The Desktop Window Manager exited with code (0xd00002fe).
The other strange issue which may or may not be relevant is when I enter task manager on the affected server, the User details tab has lots of entries (approx. 60) with no names and 0% CPU/Memory. This looks odd to me.
Any help gratefully received as I don't want to rebuild from scratch if it is a basic tweak setting somewhere.

Hi Sir,
What I understood from this error was thata RESTRICTED amount of MEMORY allocated for particular type of OS RESOURCE,
has got EXHAUSTED.<o:p></o:p>
<o:p> </o:p>
In both the cases above,
the resource type that was getting exhausted or causing other resources to be exhausted was a HANDLE. A Handle is an OS object used to get a reference of another object (like File, registry,
port etc.). It’s using these handles that a process will work with open files, read registry keys or work with a network port.<o:p></o:p>
<o:p> </o:p>
In both the above scenarios,
we saw a process (Non-Microsoft) consuming large amount of Handles. You can view the handles owned by different processes through
"Task Manager" in Windows. In the "Task Manager", under the Process tab you can add an additional column to display Handles information.
http://blogs.technet.com/b/abizerh/archive/2009/07/12/troubleshooting-the-error-not-enough-storage-is-available-to-complete-this-operation.aspx
>>Any help gratefully received as I don't want to rebuild from scratch if it is a basic tweak setting somewhere.
Instead of rebuilding , you may try to perform in-place upgrade .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Hibernate - Insufficient system resources exist to complete the API (Tecra M4 )

I just thought that I would pass on my experience with this problem.
I recently upgraded the memory of my Tecra M4 to 2GB of RAM. Everything was fine except everyonce in a while it would not hibernate. It would suspend to RAM (standby) however. It seemed to happen after the antivirus software kicked in (which I had changed around the same time). I investigated that route but it also happened if I had a lot of programs running. So, a quick google search revealed why almost all laptops ship with only 512MB of RAM.
There is a problem with Windows releasing the memory in a way which allows it to be written to the hard drive, preventing hibernation and creating the very vague error message "Insufficient system resources exist to complete the API".
The solution is to contact Microsoft by telephone and ask them for the hotfix from Knowledge Base article #909095. The hotfix is free although the MS website makes it look as though you will have to pay 200 for contacting MS support.
This seems to have solved my problem!
Hurray!
Here is the Knowledge Base article:
http://support.microsoft.com/?kbid=909095
Here is the Blog that I first found the solution on:
http://www.ntwizards.net/2004/10/13/hibernate
Of course, the one problem with contacting MS support is that I have recieved LOTS of phone calls asking me what I thought of their support... it was pretty good so I don't really mind but I do find it funny that I keep getting called and asked the same questions!

Hi Kelly
Thanks for this useful information.
Its very nice that you have posted this tip. I think its very helpful for forum users which could have the same issues on the notebooks.
Regards

When i open .exe error poops Insufficient system resources exist to complete the requested service

when i try to open some exe it tells me: Insufficient system resources exist to complete the requested
service
but before it was working

Hi,
According to the error message, it could be a Service running that is consuming all the memory, you may check the memory.
Diagnosing memory problems on your computer
http://windows.microsoft.com/en-us/windows7/Diagnosing-memory-problems-on-your-computer
Please aslo check the CPU and memory performance to determine which application use too much resource.
http://windows.microsoft.com/en-in/windows7/view-cpu-utilization-and-other-performance-information
It could be what a lot of posts online talk about a software hive corruption. If you have any unnecessary external device connected to the machine, you may unplug them. Also uninstall 3rd party antivirus software.
Then, please try clean boot mode and check the result:
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista.
http://support.microsoft.com/kb/929135
Meanwhile, you can use this tool to scan your system and check if this is a virus-effected issue:
http://www.microsoft.com/security/scanner/en-us/default.aspx
If the issue did not occur before, please try to use the system restore, return to the point which did not appear the problem.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Error: insufficient system resources exist to complete the requested service

Hi,
Hope all are well. I am getting this error "insufficient system resources exist to complete the requested service" while trying to install Lookback Adapter on my Windows 7 Professional OS installed on my HP Laptop.
Well, there is more to this problem. Actually I have VMWare installed on my Laptop where everything was working fine. At one fresh boot, I found VMWare Host-Only adapters were missing. So I tried to enable them and could never do so. I tried to troubleshoot
a lot but couldn't get it working. Not sure why but I thought of uninstalling Lookback Adapter and reinstall and see if that works and there you go, I am getting "insufficient system resources exist to complete the requested service". I am sure if
I can solve this one for Loopback Adapter, I can also make VMWare environment working as there definitely appears to be a relation between these two.
So by now, I have at least read 20 different articles and did a "Clean Boot" of OS and uninstalled all unnecessary applications from it. But I still can't install Loopback Adapter.
Can some Microsoft expert provide a solution? I can see many people facing this problem and many of them haven't found a solution. Note that I have admin rights on my OS.
Any quick help will be greatly appreciated!
Thanks,
N Jo

Based on the information found on the internet and on the Microsoft website, there is nothing wrong with the OS.
How much personal research have you done looking for solutions?
See Microsoft info links @
http://www.microsoft.com/en-us/search/results.aspx?form=MSHOME&mkt=en-us&setlang=en-us&q=microsoft%20loopback%20adapter%20windows%207
See Google info links @
https://www.google.com/search?lr=&as_qdr=all&q=microsoft+loopback+adapter+windows+7&revid=308607325&sa=X&ei=KIOxU8zaNIqvyAT6soKQDw&ved=0CGgQ1QIoAQ&biw=1128&bih=871
And based on the thread @
http://social.technet.microsoft.com/Forums/windows/en-US/259c7ef2-3770-4212-8fca-c58936979851/how-to-install-microsoft-loopback-adapter it has been working for the past 5 years.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Insufficient System resources exist to complete the requested Services

Hi,
My client has SBS 2011 with 32GB ram and ever two or three days some users get this error message when trying to access folders on the Server "Insufficient System resources exist to complete the requested Services" I have to restart the server
to correct this issue. Driving me nuts.....
Has anyone come across on this on SBS 2011?
Many Thanks
JP
JP

Hi HC13,
We have OS on Raid 1 "136GB" and Raid 5 for Application and Data Drive "4TB". Ram is 32GB. The Server is Dell T420. The Ram shoots up to 24GB.
Exchange is limited to 2GB but w3wp.exe takes up a lot of ram I really don't know how to control this ram take up.
On another note Larry this is happening to 5 users on the first floor and on ground floor 10 users no issues. Once I restart the server all is well as ram is 12GB after restart and during the day it climbs to 24 or 26Gb. This is
happening on two sites. Strange thing is this are the only two sites with 32Gb Ram, the rest of my sites have 16Gb and they don't have any issues.
Many Thanks for your efforts
JP

Optimize-volume -retrim gives error Optimize-Volume : Not enough storage is available to complete this operation

We ar e working with a 3par san combined with a hyper-v cluster. I have some virtual machines with direct attached storage. when i issue the command optimize-volume -driveletter x -retrim I Always get an error Not enough storage is avalable to complet this
operation. The command defrag /L gives me an out of memory error. All volumes are over 2 TB

Hi,
Thanks for responding,
We are working with Windows 2012 R2. We are running the optimize-volume cmdlet on the guest system. The guest system is directly attached to the SAN through the virtual fibre channel adapter. Although we have some volumes with less ten 15 % space we
also have tested it with volumes which have more then 25% space. All gave the same error so I'm wondering if it is the amount of memory addressed to the virtual machines what give the problem
The HP 3Par San normaly will do it automaticly but on 1 volume it is not cleaning up after we deleted 2 TB on disk space.

Hyper-V - Not enough storage is available to complete this operation

Hi,
I'm running Hyper-V on Windows 8.1.
This is what I've one so far. I installed Hyper-V and everything was working fine (i.e. Hyper-V started and I was able to create a VM).
Then when I created a new VM I ran out of diskspace, and that seems to be where the problem started. I resolved my disk space issue. However when I tried to start the Hyper-V service I'm getting:
error 14: Not enough storage is available to complete this operation.
I tried removing Hyper-V and then reinstall Hyper-V but this still gives the same error. I'm guessing that something got corrupted when I ran out of disk space, however a reinstall should have done the trick.
The event log ( System log) only shows :
The Hyper-V Virtual Machine Management service terminated with the following error:
Not enough storage is available to complete this operation.
Any ideas?

Hi Pieter,
How are things going ?
Could you please have a share with your storage environment and the steps you resolved your disk space issue .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA)

Hello Gurus
i have installed windows server 2012 RTM with Hyper-V. i already created virtual machine with virtual fiber channel adapter connected to physical one. sometimes when i restart the virtual machine it gets failed to start again and the following error appears
in the event viewer of the host:
error id 21502
'Virtual Machine xyz' failed to start.
'xyz' failed to start. (Virtual machine ID number)
'xyz' Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA). (Virtual machine ID
number)
'xyz': Operation for virtual port (C003FF18F98C000E) failed with an error: No physical port available to satisfy the request (Virtual machine ID
number).
error id 1069
Cluster resource 'Virtual Machine xyz' of type 'Virtual Machine' in clustered role 'xyz' failed. The error code was '0x5aa' ('Insufficient system resources exist to complete the requested service.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
appreciate your help
Ashraf

Dear All,
Subject : Need to create a file cluster
in Guest Vms (Host machine : Windows 2012 R2), using MSA p2000 strorage with HBA Qlogic (HP 8Gb PCIe Host Bus Adapter)
Note: It's a direct connection from HBA to HP MSA p2000 (No SAN switch in between)
Currently I am using Qlogic HBA (HP
81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter- Part No. AK344A).
Unable to create vPort using Microsoft
Hyper-V (Win 2012 R2) & secondly using QConverge
Console utility.
When trying to create Microsoft
Hyper-V (Win 2012 R2), I received the below error.
Secondly, when I am trying to create vSAN switch in using Qlogic QConverge Utility the above error is popup.
Currently I am using the following latest version of Qlogic Firmware & Drivers...
HBA - Running Firmware Version: 7.00.02
HBA - Driver Version: STOR Miniport 9.1.11.24
If any body the same issue, Please could you update me as earliest.
Regards,
Mirza

While Browsing SSAS 2005 Cube Getting Error " The following system error occurred from a call to GetOverlappedResult for Physical file: Logical file: '' : Insufficient system resources exist to complete the requested service."

Hi Guys,
When I try to Brows Cube (SSAS 2005), I get below error (Sometimes):
TITLE: Microsoft SQL Server 2005 Analysis Services
Server: The operation has been cancelled.
The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\674.fact.data', Logical file: '' : Insufficient
system resources exist to complete the requested service. .
The following system error occurred from a call to GetOverlappedResult for Physical file: '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q23.0.prt\385.fact.data', Logical file: '' : Insufficient
system resources exist to complete the requested service. .
BUTTONS:
OK
and I think due to above Error, Index on a Particular Attribute (EMP_ID) of a DIMENSION DIM_EMP is getting dropped from FEW of the Partitions (Folders) and started getting new error:
TITLE: Microsoft SQL Server 2005 Analysis Services
File system error: The following error occurred while opening the file '\\?\F:\Program Files\Microsoft SQL Server\MSSQL.2\OLAP\Data\XXX_2012.0.db\XXX DC.0.cub\FACT_XXX.0.det\PARTITION_2013Q31.0.prt\688.DIM_EMO.EMP_ID.fact.map'.
BUTTONS:
OK
I followed the above path and did not find file 688.DIM_EMO.EMP_ID.fact.map in folder PARTITION_2013Q31.0.prt. Once I rebuild the Index (ProcessIndex) for this partition, I am able to See file 688.DIM_EMO.EMP_ID.fact.map.
But again when next time I get error "Insufficient system resources exist to complete the requested service", Then 688.DIM_EMO.EMP_ID.fact.map will be dropped and will not be available in folder PARTITION_2013Q31.0.prt.
Anyone had similar issue. Could you please share your experience and resolution if any.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi Shiven,
In your scenario, the issue occur at sometimes, right? Base on my research, the issue can be caused by that calculation estimate exceeded available memory. Possibly due to possible number of dimension members and sizes of keys. And 32bit environment didn’t
allow for any expansion to the SSAS memory space.
To avoid this issue, please try to use userva to fine tune the 3GB setting down to 2900 since /3GB is the likely
cause (has been for most other customers who encountered the same problem before). The KB Articles below discuss that setting in detail.
How to use the /userva switch with the /3GB switch to tune the User-mode space to a value between 2 GB and 3 GB
Regards,
Charlie Liao
TechNet Community Support

Excel 2010 not enough system resources to display completely

Similar Messages

Maybe you are looking for