Excel 2010; Two file opened in a single instance with two different windows... Is it possible?

Hello
I'm using Excel 2010
I need to open a new Excel file to be display on a 2' monitor. The new file need to be under the same instance has my main Excel file to prevent problem with a special dll collection that I'm using.
I need to have both file in a separate window
Is it possible?
Excuse my English
Martin

Hi Martin,
Open two excel file in one excel instance, display them to different windows.
Please try the methods listed in the thread below:
http://social.technet.microsoft.com/Forums/en-US/6ba32569-19a0-4b45-806f-9a42258bdb5f/how-to-open-two-excel-files-in-multiple-monitors-in-windows-7?forum=excel
Best Regards,
Wind

Similar Messages

Excel 2010 error when opening excel file

Getting error "excel can not open the file xlsx because the file format or extension is not valid"

Hi,
Based on the error message you provided, this file may have been saved as an Excel binary workbook. However, the workbook has an .xlsx extension that is appended to the file.
Try to change the file name from ".xlsx" to ".xlsb" or ".xls" to check the result.
One other possible cause is the file is corrupted, open Excel and click File -> Open -> Browse to the file location, select the file, and choose "Open and Repair", check if this helps in this scenario:
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

SQL Injection, replace single quote with two single quotes?

Is replacing a single quote with two single quotes adequate
for eliminating
SQL injection attacks? This article (
http://www.devguru.com/features/kb/kb100206.asp
) offers that advice, and it
enabled me to allow users to search name fields in the
database that contain
single quotes.
I was advised to use "Paramaterized SQL" in an earlier post,
but I can't
understand the concept behind that method, and whether it
applies to
queries, writes, or both.

Then you can use both stored procedures and prepared
statements.
Both provide better protection than simply replacing
apostrophes.
Prepared statements are simple:
Set myCommand = Server.CreateObject("ADODB.Command")
...snip...
myCommand.CommandText = "INSERT INTO Users([Name], [Email])
VALUES (?, ?)"
...snip...
myCommand.Parameters.Append
myCommand.CreateParameter("@Name",200,1,50,Name)
myCommand.Parameters.Append
myCommand.CreateParameter("@Email",200,1,50,Email)
myCommand.Execute ,,128 'the ,,128 sets execution flags that
tell ADO not to
look for rows to be returned. This saves the expense of
creating a
recordset object you don't need.
Stored procedures are executed in a similar manner. DW can
help you with a
stored procedure through the "Command (Stored Procedure)"
server behavior.
You can see a full example of a prepared statement by looking
at DW's
recordset code after you've created a recordset using version
8.02.
"Mike Z" <[email protected]> wrote in message
news:eo5idq$3qr$[email protected]..
>I should have repeated this, I am using VBScript in ASP,
with an Access DB.
>

Is it possible to use a single iPhone with two contact numbers via dual sim or an app?

Is it possible to use a single iPhone with two contact numbers via dual sim or an app?
This would be a useful feature for personal and company numbers but using one mobile, rather than carrying two devices or diverting calls.

Then go ahead and try it. You'll find it's probably a load of crap.
You want 2 numbers, then use Google Voice or TalkaTone
Those are US based only Apps or numbers so no good. I won't be wasting money by just trying something either, especially because using a dual sim would mean purchasing another sim card on either pay as you go or monthly contact.

Deinstall Oracle 11.2.0.2 grid Single instance with ASM at AIX

Hi gurus,
I'm trying to deinstall Oracle 11.2.0.2 grid Single instance with ASM at AIX when executing deinstall utility It's doesn't show any commando to run with root:
the first execution, ran the command as root (normally), but the session where it ran the deinstall tool was closed.
[root@> /tmp/software ]#/tmp/deinstall2011-07-05_06-54-19PM/perl/bin/perl -I/tmp/deinstall2011-07-05_06-54-19PM/perl/lib -I/tmp/deinstall2011-07-05_06-54-19PM/crs/install /tmp/deinstall2011-07-05_06-54-19PM/crs/install/roothas.pl -force -deconfig -paramfile /tmp/deinstall2011-07-05_06-54-19PM/response/deinstall_Ora11g_gridinfrahome1.rsp
Using configuration parameter file: /tmp/deinstall2011-07-05_06-54-19PM/response/deinstall_Ora11g_gridinfrahome1.rsp
PRKO-2573 : ONS daemon is already stopped.
CRS-2500: Cannot stop resource 'ora.cssd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'dwmdm'
CRS-2673: Attempting to stop 'ora.evmd' on 'dwmdm'
CRS-2677: Stop of 'ora.evmd' on 'dwmdm' succeeded
CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'dwmdm' has completed
CRS-4133: Oracle High Availability Services has been stopped.
ACFS-9459: ADVM/ACFS is not supported on this OS version: 'AIX 5300-10-01-0921'
ACFS-9201: Not Supported
Successfully deconfigured Oracle Restart stack
[root@> /tmp/software ]#
-- here the deinstall tool was closed --
-- -Here the output for the second execution --
$deinstall
Checking for required files and bootstrapping ...
Please wait ...
Location of logs /u01/app/oracle/oraInventory/logs/
############ ORACLE DEINSTALL & DECONFIG TOOL START ############
######################### CHECK OPERATION START #########################
Install check configuration START
Checking for existence of the Oracle home location /grid/app/grid/grid
Oracle Home type selected for de-install is: SIHA
Oracle Base selected for de-install is: /grid/app/grid
Checking for existence of central inventory location /u01/app/oracle/oraInventory
Checking for existence of the Oracle Grid Infrastructure home
Install check configuration END
Skipping Windows and .NET products configuration check
Checking Windows and .NET products configuration END
Traces log file: /u01/app/oracle/oraInventory/logs//crsdc.log
Network Configuration check config START
Network de-configuration trace file location: /u01/app/oracle/oraInventory/logs/netdc_check2011-07-06_09-16-58-AM.log
Network Configuration check config END
Asm Check Configuration START
ASM de-configuration trace file location: /u01/app/oracle/oraInventory/logs/asmcadc_check2011-07-06_09-16-58-AM.log
ASM configuration was not detected in this Oracle home. Was ASM configured in this Oracle home (y|n) [n]: n
ASM was not detected in the Oracle Home
######################### CHECK OPERATION END #########################
####################### CHECK OPERATION SUMMARY #######################
Oracle Grid Infrastructure Home is:
The cluster node(s) on which the Oracle home de-installation will be performed are:null
Oracle Home selected for de-install is: /grid/app/grid/grid
Inventory Location where the Oracle home registered is: /u01/app/oracle/oraInventory
Skipping Windows and .NET products configuration check
ASM was not detected in the Oracle Home
Do you want to continue (y - yes, n - no)? [n]: y
A log of this session will be written to: '/u01/app/oracle/oraInventory/logs/deinstall_deconfig2011-07-06_09-16-56-AM.out'
Any error messages from this session will be written to: '/u01/app/oracle/oraInventory/logs/deinstall_deconfig2011-07-06_09-16-56-AM.err'
######################## CLEAN OPERATION START ########################
ASM de-configuration trace file location: /u01/app/oracle/oraInventory/logs/asmcadc_clean2011-07-06_09-17-03-AM.log
ASM Clean Configuration END
Network Configuration clean config START
Network de-configuration trace file location: /u01/app/oracle/oraInventory/logs/netdc_clean2011-07-06_09-17-03-AM.log
De-configuring backup files...
Backup files de-configured successfully.
The network configuration has been cleaned up successfully.
Network Configuration clean config END
---------------------------------------->
Press Enter after you finish running the above commands
<----------------------------------------
*1. Any idea to remove Grid infraestructure normally?*
*2. In this step, can I remove (rm) the grid HOME ?*
Regards

Mexman wrote:
*1. Any idea to remove Grid infraestructure normally?*
*2. In this step, can I remove (rm) the grid HOME ?*
RegardsHi,
You must use deinstall tool to remove Grid Infrastructure installation,
as grid owner run $GRIDHOME/deinstall/deinstall
Cheers

How can i split a long single video with many different scenes in it ?

how can i split a long single video with many different scenes in it ? in premiere pro cs3

Yep better ask in the Premeire Pro forums, but while loading their forum page check the cutter tool (C) it will allow you to cut your footage

After Firefox update, my gmails open up in separate instances of minimized Firefox windows. Any suggestions?

After an automatic Firefox update, my gmails started to open up in separate instances of minimized Firefox windows. The former way was that any email I clicked on would open full screen in the same instance of Firefox and in the same maximized window. Any suggestions on how to get back to the former way?

First, try to update to the recently released Firefox 15, see if that resolves your issue. [[Update Firefox to the latest version]].
If it doesn't, try to Reset Firefox.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

I have two separate calendars on iCloud (to share with two different groups), but I click on the second and try to enter data, it defaults to the first one I set up. How do I fix this?

I have one iCloud account. I set up two separate calendars on iCloud to share with two separate groups. But when I click on the second calendar and try to enter data, it defaults to the first/other calendar (wrong group to share with). How do I fix this?

Was this ever resolved?
Recently I set up a share for one calendar with another Apple user, through my iCloud. Now I find that the shared calendar, which has maybe 50 entries a week because it is for keeping track of community center activities and printing out PDFs, appears in my personal Calendar --- unless I turnoff the sharing.
Is this generally true? I cannot find any clarity on this on Apple Support.
If so, I plan to stop the assistance to the other Apple user. I will stop sharing the community center calendar that I set up on my computer and ask her to set up such a calendar on her own computer anew. The sharing of Calendars does not work well. It seems the shared calendar takes over as the only calendar one can see on one's own computer, replacing other calendars set up without sharing. I can only "see" the other calendars by turning off the sharing on the shared calendar. This is inconvenient. Basically shared Calendars take over!

Office 2010 & 2007 - Excel and Access File Locking Out On the Network With Multiple Users

This is also posted in the Office 2010 - IT Pro General Discussions, but was suggested to repost here, since a definitive answer was not found.
Hi,
An issue that's happening is that Excel and Access files are locking on the network. We're currently using Office 2007 and 2010.
Here are some different scenarios that are happening:
When opening the file it is locked out by “User X” which is the person that has the file locked out and no one else can open the file.
When opening the file it is locked out by “User Y” which is NOT the actual person, but is locked out by “User X” and no one else can access the file.
When opening the file it is locked out by “…another user” which is generic and no one else can access the file.
The two more common events are incident 1 and 2 with 3 happening the less common.
This message will continue until the sessions are closed through computer management on the file server.
The file server is running Windows Server 2003.
This does happen on both Windows XP and Windows 7 clients.
This does happen for users using Office 2007 and Office 2010.
There are two sets of Office 2010 Users when it comes to patches. Everyone has the most current patches with Office 2010 SP2 while anyone that has Microsoft Project 2010 is using all the current update before Office 2010 SP2.
All users that are using Office 2007 have all the current patches and service packs.
Another variable is that we have users that will leave a file open on the network for 3+ days and after a while it will lock the file out.
Also we have Shadow Copy that runs daily on the system which I'm not for sure if that impacts anything if a file is opening during that time.
Any ideas on how to mitigate the lock out issues would be appreciated.
Thanks,
Binary Process
Edit November 12, 2013: This issue can occur if and if not another person actually has the file open. If the person doesn't have the file open then there is a hung connection which needs to be disconnected by going to the Computer Management of the File
server.

Hi Binary,
I know that the description of the hotfix does not relate to the issue. The purpose is to install it for upgrading SMB related file.
A similar issue I encountered before:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b7fcc59b-52d9-4a02-863a-1a529bcb8cb1/temp-doc-etc-files-dont-close-after-a-file-closes-this-causes-locked-files?forum=winserverfiles
It is resolved by upgrading SMB files so maybe it will help on your case.
Another hotfix which may related:
http://support.microsoft.com/kb/983458
If you have any feedback on our support, please send to [email protected]

Excel 2010 temp Files do not delete on network share automatically when closed *Word 2010 do!*

Hi,
saw this post in similar Versions but never with a "cool solution" :)
We got NetApp 2050 as Filer in a Windows Server 2008 R2 Domain with Windows 7 Clients and Office 2010 Pro Plus, all up to date with WSUS.
If I open an Excel 2010 sheet on the Netapp Share or a Share on the Domain Controller and close it, it do not delte the temp file.
Same to PowerPoint 2010.
But with Word 2010, this works!
Therefor I don't think, this will be the NTFS permissions or Network issues.
We also got VMware Clients with Windows 7 and Office 2010. There the issue does not occure!!!
May be something in Group Policies? Could it be some Microsoft Updates?
I'm very interested in your opinions...
Best regards...

Hi,
As far as I know, the issue usually caused by the anti-virus actively scanning Excel files (XLS, XLSX, or XLSM files). Please try to make the anti-virus to not actively scan Excel files.
Then, if you are using Kaspersky 2009, I recommend we try the below method:
Go to Run>Regedit>Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\KLIF\Parameters>Create the key NonCachedIo (Type: Dword Value:1)
Next, some other customer solved the issue by turning off the index with the effected folders.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error in MS excel 2010 standard file..

Dear Concnered,
I am troubling using my excel file while using it says Excel cannot complete this task with the available resources.chosse less dataa or close other file to complete the task.
please help.
same file is opening in onther system perfectly. i have reinstalled office, C++ ETC.
but still the same issue is there.
please help..

Hi,
Based on the error message, the issue may be caused by some reasons, please try the following methods to fix it:
Method 1: Check whether you exceed limits
Method 2: Make sure only one instance of Excel is active
Method 3: Close all applications
Method 4: Test Excel in safe mode
Method 5: Turn off the preview pane in Windows Explorer (Windows 7 only)
Method 6: Save as an Excel workbook file if you use relative names
Method 7: Change defined names to reference cells directly
Quote from:
http://support.microsoft.com/kb/2655178/en-us
Besides that, I found more KB and blog for this error message:
http://support.microsoft.com/kb/2779852/en-us
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/22/quot-excel-cannot-complete-this-task-with-available-resources-quot-after-installing-ms12-030.aspx
Regards,
George Zhao
TechNet Community Support

Excel for Mac File- Open Issue after latest OS X update (Yosemite)

Using Excel for Mac 14.4.8 (on OS X Yosemite 10.10.3) always defaults to the Documents directory when using File->Open. It will not remember last directory a file was opened from. Has anyone else experienced this? This did not happen
before the latest OS X update.
(If this is not the right forum, could you please tell me which forum is for Excel for Mac questions.)

Hi
This is the forum for discussions about Excel development (VBA, automation) on Windows platform. Since your issue is about Excel on Mac OS ,I will suggest you posting this thread on Office for Mac so that you will get more effective and more professional
help there.
Office for Mac: http://answers.microsoft.com/en-us/mac
Thanks for your understanding.
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SP2013 and Project 2013 - project files open in read-only mode with no options to edit only Save As

Hi all,
Environment:
SharePoint 2013 (15.0.4420.1017) RTM
Windows 8 - Project 2013 (15.0.4433.1506) 32Bit
Issue details:
When opening .mpp files stored within SharePoint they are opened successfully within Project 2013 however they are opened in Read-Only mode with no options to edit/check out only Save As. The
same outcome is experienced if you click the document link within SharePoint or you chose to edit from the document menu.
Opening the file through windows explorer also opens only in read-only mode.
To date we’ve tested the following
Windows 7 – Office 2010 = working as expected
Windows 8 – Office 2010 = working as expected
Windows 7 – Office 2013 = opening as read only, no prompt to edit
Windows 8 – Office 2013 – opening as read only, no prompt to edit
Current thinking is that it is an issue with either the SharePoint Office Documents Class ActiveX control or Project 2013 itself interacting with SharePoint 2013.
We have tested this in multiple SP2013 environments with the same outcomes.
The workaround therefore is to save locally and then upload again which is not ideal.
Unable to find an exact issue match to this.
Any help with this appreciated.

Hi Dan,
For us after investigating this further it was found that using the document menu to edit or checkout and then edit results in the project file being opened in read-only mode.
The same issue was present for Visio files.
Using the FILES ribbon menu results in the document being opened in edit mode successfully in both Project and Visio.
Please note that we found that this issue only exists within document libraries where checkout is required to edit which was our case. If checkout is not required the document
menu can also be used as expected.
Cheers,
Dan

Opening Blend, I'm met with TWO device choices my Z10 and another that I don't recognize

Actually, when I first open Bland on Samsung Tab S, I see my Z10. I enter the Password. It goes through some process and then I am met with TWO device, the Z10 and Device-xxxx where I guess XXXX is some partial PIN number but I don't recognize it. So I then have to reselect the Z10 and again enter its password. Basically logging in TWICE. Somewhat irritating but I'm more curious what's the other device and how do I eliminate it. Going to BBID site I don't see any place to specify devices associated with my BBID. And it is not the partial PIN of either of my Playbooks (heaven forbid Blend from supporting BB's own devices).

f2 wrote:
So, I gather it is some residual device that BBID had/had associated but I don't know where to go to remove it from the pool.
The current Z10 replaced a defective one about a year ago and I don't recall its PIN number.
Where does BBID store the devices that share it?
I will charge the 9930 and see what its pin is.
I think that is likely it.
ON a PC, login to www.bbid.com and see if that device is still listed and you can remove it there.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I want to buy a Canon 6D but will its raw files open in my Photoshop CS6 with camera raw version 8.5.0.236

I want to buy a Canon 6D but will its raw files open in my PhotoshopCS6 with camera raw version 8.5.0.236. Does anyone know, please

Camera Raw plug-in | Supported cameras

Excel 2010; Two file opened in a single instance with two different windows... Is it possible?

Similar Messages

Maybe you are looking for