Excel 2011 Mac - function IRR() not found "#NAME?"
Hello everyone
I need to calculate the Internal Rate of Return using the "=IRR()" function. The Problem is that Excel does
not find the function and returns the "#NAME?" error. I checked the web for a solution but can't find it to safe my life.
How can I add the function to Excel 2011 for Max?
Thank you very much for your help!
Jakob
Click the cell that displays the error, click the button that appears , and then click the option "Trace Error"
if it appears. (Sorry, I've not install Excel 2011 for MAC, so I cannot confirm the exact name of the option)
Review the possible causes and solutions from the following article.
Correct a #NAME? error:
http://office.microsoft.com/en-gb/excel-help/correct-a-name-error-HP005203939.aspx
Tony Chen
TechNet Community Support
Similar Messages
-
Error Function module " " not found in Smartforms
Hi all,
Please help me out .
I created the form using the smartforms, check it and activated it. I can see the unique function module is assigned to the form. I wrote the ABAP program and use function module SSF_FUNCTION_MODULE_NAMEand also define data types.
when I called the function module fm_name for passing values and tables from program to smartform. This is working perfectly in development server but in production it giving error like Function module " " not found.
Below I m pasting my code.
*& Report ZCASHJOURNAL *
REPORT zcashjournal .
TABLES: bseg.
DATA: FM_NAME TYPE rs38l_fnam.
DATA:BEGIN OF it_bseg OCCURS 0.
INCLUDE STRUCTURE bseg.
DATA:END OF it_bseg.
DATA:BEGIN OF it_bseg1 OCCURS 0.
INCLUDE STRUCTURE bseg.
DATA:END OF it_bseg1.
DATA: gv_amt_in_words TYPE spell,
gv_word TYPE spell-word,
gv_decword TYPE spell-decword.
DATA:BEGIN OF gt_bkpf OCCURS 0.
INCLUDE STRUCTURE bkpf.
DATA:END OF gt_bkpf.
DATA:bktxt TYPE bktxt.
DATA:waers TYPE waers.
DATA:belnr TYPE belnr_d.
DATA:werks TYPE bukrs.
DATA:desc TYPE butxt.
DATA:awkey TYPE awkey.
DATA:docno TYPE matnr.
DATA:cajo TYPE awkey.
DATA:desc1 TYPE butxt.
DATA:dmbtr TYPE dmbtr.
SELECTION-SCREEN BEGIN OF BLOCK b2.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (15) FOR FIELD s_belnr.
SELECTION-SCREEN POSITION 28 .
PARAMETERS : s_belnr TYPE bseg-belnr .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (15) FOR FIELD s_werks.
SELECTION-SCREEN POSITION 28 .
PARAMETERS: s_werks TYPE werks.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECT * FROM bkpf
INTO CORRESPONDING FIELDS OF TABLE gt_bkpf
WHERE belnr LIKE s_belnr
AND bukrs LIKE s_werks.
IF NOT gt_bkpf[] IS INITIAL.
SELECT * FROM bseg
INTO CORRESPONDING FIELDS OF TABLE it_bseg
FOR ALL ENTRIES IN gt_bkpf
WHERE bukrs EQ gt_bkpf-bukrs
AND belnr EQ gt_bkpf-belnr
AND shkzg EQ 'S'.
ENDIF.
LOOP AT gt_bkpf.
bktxt = gt_bkpf-bktxt.
waers = gt_bkpf-waers.
belnr = gt_bkpf-belnr.
werks = gt_bkpf-bukrs.
awkey = gt_bkpf-awkey.
docno = awkey+0(10).
cajo = awkey+10(4).
ENDLOOP.
LOOP AT it_bseg.
dmbtr = it_bseg-dmbtr.
ENDLOOP.
IF s_werks EQ '65'.
desc = 'JCBML - Heavy Equipments'.
ENDIF.
IF cajo EQ '0001'.
desc1 = 'PETTY CASH PLANT II'.
ENDIF.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
amount = dmbtr
currency = waers
filler = space
language = sy-langu
IMPORTING
in_words = gv_amt_in_words
EXCEPTIONS
not_found = 1
too_large = 2
OTHERS = 3.
IF sy-subrc EQ 0.
MOVE : gv_amt_in_words-word TO gv_word,
gv_amt_in_words-decword TO gv_decword.
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZCASHRECPT'
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING formname = 'ZCASHRECPT'
variant = ' '
direct_call = ' '
IMPORTING fm_name = lf_fm_name
EXCEPTIONS no_form = 1
no_function_module = 2.
*v_vbeln = S_VBELN-low.
CALL FUNCTION FM_NAME
EXPORTING
bktxt = bktxt
waers = waers
belnr = belnr
werks = werks
desc = desc
docno = docno
cajo = cajo
desc1 = desc1
dmbtr = dmbtr
gv_word = gv_word
TABLES
T_ZDEB = it_bseg
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.Hi Rakesh,
Check two things
1. Program tranpsorted to production without any error in request log.
2. Smartform tranpsorted to production without any error in request log and without renaming / misspelling it.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZCASHRECPT'
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Also try to uncomment the Message id part and it will show some meaningful message.
And to check whether actaually fucntion module is generated or not goto smartforms ->Smartform name -> Display -> Environment->Fucntion module name . if this is blank try to retransport smartform.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.*** -
Hi Masa/Muthu/Viru ,
We have upgraded from SRM 3.0 to SRM 7.0.
we have copied the ZUS2000113 from Business object BUS2000113 for Contract workflow.
In SRM 7.0 the above Function Module not found in SRM 7.0 -CRM_ORDERADM_H_SELECT_BUF_M_DB.
Can you telll which is the replacement of this FM
Regards
G.Ganesh KumarHello,
What is the aim of FM name you gave us ?
What is its function group ?
With those data, it could be easier to find an existing one with same goal in SRM 7.0 release .
Regards.
Laurent. -
Hello All,
Problem:-
I am transporting my interface from Dev to QA using CMS transport method. Everything is fine in Dev system even mapping is checked correcetly, but when I am checking the mapping in QA system it it showing the error message in the Message mapping as:-
Error Message in QA message mapping:-
The source or target structure has been changed or could not be found in the Integration Repository. The mapping definition contains elements or attributes that do not exist in the changed structure. The relevant entries will be deleted
Function iFS not found
Function iFS not found
In My message mapping i am using IF then else function.
I created new message mapping in Dev system and also transported again but it is giving the same eror message.
ChiragFew other functions are also missing.
If functions were present in DEV and are now missing in QA....then i would suggest you compare both the systems in terms of patch....this might be the cause of concern....both should be on the same SP
Update:
Check the solution section from this note(specifically for IfS): https://service.sap.com/sap/support/notes/1090369
and confirm that your QA system abides by them
Regards,
Abhishek.
Edited by: abhishek salvi on Nov 20, 2009 4:14 PM -
SMQ2 SYSFAIL - Function Module not found
Hi All,
When i am trying to push data to cdb i got sysfail - Function module not found error in the smq2. But data inserted in the cdb, the probelm we found was the data object having the dependency cause this error.
The data was there in the cdb, but no distribution entries found.
Please help me to resolve the same.
Regards,
RamkumarHi,
Clear the queue first (delete it), then implement the NOTE 1552255 - 'Parallel load problem for partial association shadow'. Run the report mentioned in the NOTE and do a delta generation.
Then on doin a delta load the queues should run successfully.
regards,
Anil -
ORA-20100: Error occurred while processing: Function 'test' not found.
this program follow:
declare
p xmlparser.Parser;
xmlbuf varchar2(512);
xmlpat varchar2(512);
xmldoc xmldom.DOMDocument;
xmldocnode xmldom.domnode;
n xmldom.domnode;
begin
xmlbuf:='<emps><emp>odp</emp></emps>';
xmlpat := 'emps/emp/test()';
p:=xmlparser.newParser;
xmlparser.parseBuffer(p,xmlbuf);
xmldoc:=xmlparser.getDocument(p);
xmldocnode :=xmldom.makeNode(xmldoc);
n:=xslprocessor.selectSingleNode(xmldocnode,xmlpat);
--dbms_output.put_line('value of first selected node is:ok');
exception
when others then
raise;
end testxml;
message of error:
ORA-20100: Error occurred while processing: Function 'test' not found.
ORA-06512: at line 20.
please quick reponse.Steve,
Yes it helps. I was able to finally figure this much out, however, in order to get the quotes to get handled right, I had to declare the xsl inline and I had to change (there quite a few, this just being an example) the following line from
<xsl:when test="normalize-space(string(sub_container_settings/initial_investment)) = ''">10000</xsl:when>
to
<xsl:when test="normalize-space(string(sub_container_settings/initial_investment)) = ''''">10000</xsl:when>
This works, but I would prefer to store the xsl in a CLOB. Neither of these work when I get the document from the clob and call the xmldom.parseClob procedure. The parser fails with an error that the document is not valid.
Do you have any idea on how to handle the single quotes in this circumstance. -
Function modules not found....
Hello,
I found the following errors in my SDCCN logs, I have googled and also searched in SAP market place and even in SDN but no help. Also the EWA shows the same in Missing Function Module column.Please help in this regards.
Thanks and Regards,
Yoganand.V
Errors:
1) EWA_MAIN_BUSINESS_HOURS : no matching interface found
function module not found
EWA_MAIN_BUSINESS_HOURS : funcname /SDF/MAIN_BUSINESS_HOURS , module 000156
2) READ_RFC_LIST : # of imp params in funcmod < # of imp params in mod 000152
READ_RFC_LIST : inconsistency in # of imp params found for mod 000152
READ_RFC_LIST : non-default imp param IF_ANONYMIZE is not passed to mod 000152
READ_STAMP : no matching interface found
function module not found
READ_STAMP : funcname /BDL/READ_STAMP , module 000153Hi,
EWA_MAIN_BUSINESS_HOURS
READ_RFC_LIST
READ_STAMP
are three new function modules which will be supplied with the next version of ST-PI. The next version of ST-PI is currently scheduled to be released in mid December. For the moment, the only thing to do is to ignore those errors until the next ST-PI becomes available.
best regards,
-David. -
G_G_IDOC_REC_ZZINCOT function module not found in ECC 5.0
i am getting the dump.
the fuction module is not presend in ECC 5.0
Runtime Errors CALL_FUNCTION_NOT_FOUND
Exceptn CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 04/05/2007 07:13:25
ShrtText
Function module "G_G_IDOC_REC_ZZINCOT" not found.
What happened?
The function module "G_G_IDOC_REC_ZZINCOT" was called, but cannot be
found in the Function Library.
Error in ABAP application program.
The current ABAP program "SAPLGUIF" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_FUNC',
was neither
caught nor passed along using a RAISING clause, in the procedure
"IDOC_INPUT_GLROLL" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The program "SAPLGUIF" contains a CALL FUNCTION statement. The name
of the function module to be called is "G_G_IDOC_REC_ZZINCOT".
No function module exists with the name "G_G_IDOC_REC_ZZINCOT".
All function modules are stored in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Particular attention should be paid
to upper/lower case and underscores ("_")
b) Transport error
c) If an enqueue/dequeue module has been used, the lock object
may not have been activated (ABAP Dictionary)
may not have been activated (ABAP Dictionary).
How to correct the error
Check the last transports to the R/3 System.
Is the program "SAPLGUIF" currently being changed?
If an enqueue/dequeue module is involved, is the activation
of the lock object missing in the ABAP/4 Dictionary?
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"CALL_FUNCTION_NOT_FOUND" CX_SY_DYN_CALL_ILLEGAL_FUNCC
"SAPLGUIF" or "LGUIFU05"
"IDOC_INPUT_GLROLL"
Function modules with names similar to "G_G_IDOC_REC_ZZINCOT":
G_G_IDOC_REC_COFIT
G_G_IDOC_REC_FILCT
G_G_IDOC_REC_ECMCT
G_G_IDOC_REC_GLPCT
G_G_IDOC_REC_GLT0
G_G_IDOC_REC_SECURE
G_POSTING_ZZINCOT
G_G_IDOC_SEND_COFIT
G_G_IDOC_SEND_ECMCT
G_G_IDOC_SEND_SECURE
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"IDOC_INPUT_GLROLL"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "d48ix100"
Network address.......... "151.162.153.62"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C65EFD4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 2
Short dump setting....... "full"
Database server.......... "d48ix100"
Database type............ "ORACLE"
Database name............ "D48"
Database owner........... "SAPR3"
Character set............ "en_US.ISO8859-1"
SAP kernel............... "640"
Created on............... "Nov 5 2006 20:46:58"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "156"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory usage.............
Roll..................... 16128
EM....................... 8379856
Heap..................... 0
Page..................... 16384
MM Used.................. 2530176
MM Free.................. 1657232
SAP Release.............. "640"
User and Transaction
Client.............. 010
User................ "OS0730"
Language key........ "E"
Transaction......... "YICUPLD "
Program............. "SAPLGUIF"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLGUIF" in "IDOC_INPUT_GLROLL".
The main program was "Y21091IRECON ".
The termination occurred in line 65 of the source code of the (Include)
program "LGUIFU05"
of the source code of program "LGUIFU05" (when calling the editor 650).
Processing was terminated because the exception "CX_SY_DYN_CALL_ILLEGAL_FUNC"
occurred in the
procedure "IDOC_INPUT_GLROLL" "(FUNCTION)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "SAPLGUIF ". Its source code starts in line 5
of the (Include) program "LGUIF$05 ".
Source Code Extract
Line SourceCde
35
36 *Prüfen, ob Customizing richtig eingestellt ist
37 CHECK EXIT IS INITIAL.
38 PERFORM CHECK_CUSTOMIZING USING IDOC_NUMBER.
39
40 *Für Einzelposten neue Belegnummern vergeben
41 CHECK EXIT IS INITIAL.
42 PERFORM NEW_DOCUMENT_NUMBER USING IDOC_NUMBER
43 IDOC_CONTRL-MESTYP.
44
45 *Füllen der Segmentdaten
46 CHECK EXIT IS INITIAL.
47 CLEAR IDOC_SEGMENT. REFRESH IDOC_SEGMENT.
48
49 LOOP AT IDOC_DATA WHERE DOCNUM EQ IDOC_NUMBER.
50 IDOC_SEGMENT = IDOC_DATA.
51 APPEND IDOC_SEGMENT.
52 ENDLOOP.
53
54 *Name des zu rufenden Funktionsbausteines ermitteln
55 ROL_FUNCNAME = 'G_G_IDOC_REC_$'.
56 PERFORM BUILD_ROL_FUNCNAME USING IDOC_NUMBER ROL_FUNCNAME.
57
58 *Funktionsbaustein zum Empfangen des IDOC's aufrufen
59 *Wenn Sender 4.0 System -> Nimm' TAB30, sonst altes TAB
60 IF NOT E1GLTTF-TAB30 IS INITIAL.
61 L_TAB30 = E1GLTTF-TAB30.
62 ELSE.
63 L_TAB30 = E1GLTTF-TAB.
64 ENDIF.
>>>>> CALL FUNCTION ROL_FUNCNAME
66 EXPORTING
67 MESTYP = IDOC_CONTRL-MESTYP
68 DOCNUM = IDOC_NUMBER
69 TAB = L_TAB30
70 TABLES
71 IDOC_SEGMENT = IDOC_SEGMENT
72 IDOC_STATUS = IDOC_STATUS
73 RETURN_VARIABLES = RETURN_VARIABLES.
74
75 ENDLOOP.
76
77 *Keine IDOC's empfangen
78 IF SY-SUBRC NE 0.
79 RAISE WF_ERROR_PROCESS.
80 ELSE.
81 *Prüfen, ob Fehler bei der Verarbeitung der IDOCs aufgetreten sind
82 LOOP AT IDOC_STATUS WHERE MSGTY = 'A'
83 OR MSGTY = 'E'.
84 EXIT.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 2
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY &I think that the FM is a customized one. Correct me if I am wrong. It is quite possible that certain FM's might have been missed out while the new system is built. Here I am assuming that the you are doing an upgrade.
If whatever, I've mentioned above is correct, you can copy the FM and its other components from the old system into the new one, to rectify the error -
Mac Client Certificate not found
Hey all, i'm trying to install the ConfigMgr client on a mac system. The site is 2012 SP1 RTM however since there is no release yet of the mac client i'm using the mac client install from the SP1 beta install folder (Suggested by Microsoft)
I followed the instructions on how to install clients on mac computer from technet. Everything from the install and the enrollment seems to complete fine no errors. After the enrollment when I open System Preferences > Configuration Manager it says "Certificate
not found" If i check the ccmclient log file on the mac it shows the following errors
Failed to Parse MgmtAuthority ServerList
Failed to get server list
Failed to GetProperty Mode from Configuration Provider : 80070490
Requested certificates not available in store
Certificate not found in store. Bailing out!
Failed to validate certificate
The certificate shows up under system in the keychain, the only strange thing is it shows for name the user who enrolled in the certificate. I figured it should have showed the system name. The root ca is also there. Any help would be appreciated, thanksOkay so figured this out, and i'll post in case this happens to someone else. The certificate will always show under the keychain with a name of whoever the user was that did the enrollment. So if you used Joe Smith, then the certificate will be called
Joe Smith. In my case the account I used to enroll had a active directory display name of two words such as "Joe Smith" Because of this space in between, configuration manager client kept listing the certificate as "Joe". I was then realized that indeed just
like the error said the certificate could not be found because its looking for Joe and the the certificate says Joe Smith. The fix was instead do the enrollment with a normal account with no spacing in the name. This may be a bug or Microsoft may not recommend
creating AD accounts with display names with spaces. -
Mac OSX - Certificate not found
Hi,
Is SCCM 2012 SP1 supports Mac OS 10.9.1 version? If yes, do I need to install any updates?
I have successfully installed and enrolled certificate on Mac OS 10.9.1 verison but when I open Configuration Manager under system preferences, it says ‘Certificate not found’ and
CCMClient log in Mac machine says...
Certificate not found in store. Bailing Out! Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
Failed to GetProperty Mode from Configuration Provider : 80070490 Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
Requested certificates not available in store Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
Certificate not found in store. Bailing Out! Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
Failed to validate certificate Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
OMA : Sending Notification to UI : <CCMClientNotification><Sender>Service</Sender><Name></Name><Id></Id><Type>CCM_OMA</Type><State>Error</State><Data>-2016344009</Data><Description></Description><RebootRequired></RebootRequired><Time></Time></CCMClientNotification> Default 12/26/2013
2:52:42 AM 2954526720 (0xB01A8000)
No Preferences found for Key - 'OMAFailureRetryDelayInSec', Domain - 'com.microsoft.ccmclient'. Default 12/26/2013 2:52:42 AM 2954526720 (0xB01A8000)
and to resolve the above issue need a AD account without space in between (thats what I read in blogs). In this case do I need to uninstall client and certificate? if yes could you please let me know how to unregister certificate from Mac OSX machine.
Thank you,
RamanaHi,
FWIK, I think the Mac OS 10.9.1 is supported by SCCM 2012 R2, you'd better to upgrade to SCCM R2 to get supported.
Also, take a look in the blog below. There is a way to upgrade the certificate.
http://blogs.technet.com/b/configmgrteam/archive/2013/12/16/mac-os-x-10-9-support-for-sc-2012-config-manager-clients.aspx
Juke Chou
TechNet Community Support -
Shared library: function is not found and recognized in header file
Hello,
I am trying to use Java methods into LV. I am doing so by creating Java Invocation Interface, usind which I can call Java methods into C++ and then create a shared library that can be called into LV.
When I am importing my shared library into Labview, I am getting the following error messages:
The shared library contains 3 function(s). But no function is found and recognized in the header file. The following function(s) cannot be wrapped. If you want to import these functions, please review the warning messages next to the functions below. You will need to fix the problems before you can continue with the wizard.
jclass invokeJavaClass(JNIEnv* jenv, string className);
The following symbols are not defined:
jclass;
Undefined symbols can prevent the wizard from recognizing functions and parameters. To correct this problem, check the header file to determine if you must add preprocessor definitions. Click the Back button to return to the previous page of the wizard to add a preprocessor definitionsl (for example, "NIAPI_stdcall = __stdcall" or "NIAPIDefined = 1").
The following header file was not found in the specified header file or one of the referenced header files:
- string
- iostream
- cstring
- jni.h
To fix, click the Back button to go to the previous page and add the header file path to the Include Paths list.
Please advise.
Regards,
H
Attachments:
SharedLibError.png 51 KBHello Vivek,
The LabVIEW dll that I am trying to import does not include any third-party device..all my code is fully based on LabVIEW. Maybe this helps you to guess what is happening: once I've parsed the dll' header appears an error
like this one:
void
__cdecl Zdmt(LVBoolean *stop, double P, char channelName[],
TD1
*errorIn, TD14 *FFTOptions, TD12 *Calibration, char FileName[],
int32_t minRecordLength, TD26 *InstrumentHandler, LVRefNum
sessionRefArray[],
LVRefNum *queueIN, TD1 *errorOut, LVBoolean
*averagingDone,
HWAVES LastRecordFetched, TD24 *Impedance, TD17
*ColeColeCluster,
TD18 *FFTcluster, TD5
*InstrumentHandleOutputCluster, LVRefNum *queueOut,
int32_t
*Acquired, TD6 *FreqTimeInfoCluster, double *averagesCompleted,
int32_t len);
The following symbols are not defined:
LVBoolean;
int32_t; LVRefNum;
Undefined symbols can prevent the wizard
from recognizing functions and parameters. To correct this problem,
check the header file to determine if you must add predefined symbols.
Click the Back button to return to the previous page of the wizard to
add a preprocessor definitionsl (for example, "NIAPI_stdcall =
__stdcall" or "NIAPIDefined = 1").
The following header file was
not found in the specified header file or one of the referenced header
files:
- extcode.h
To fix, click the Back button to go to the
previous page and add the header file path to the Include Paths list.
I have replaced the first line #include "extcode.h" of
the dll header file for #include "C:\Program Files\National
Instruments\LabVIEW 8.6\cintools\extcode.h" that is the full path where
the header file is located. However, new libraries seems to be missed:
- stdint.h
- MacTypes.h
As far as I know, Mactypes.h contains basic mac os data types and it doesn't have any relation with stdint.h...
I have created both of them and stored into the same folder as extcode.h, but then other libraries are missed!!!
Do you know if it would be possible to create the .dll generating all the header files associated for its data structures???
And if this is not factible, then what do you suggest me? because I hope to not having to create all the header files until it stops giving me an error!
thanks for four time,
ben -
Connection error to SAP InfoSets/Queries 'Function module not found'
I have crystal reports 2011 and I would like to connect to our SAP system (ECC6.0). I am able to connect partially but when I drill down into where I guess crystal is trying to pull a list of queries or infosets I get errors.
For infosets i get 'Function module "/CRYSTAL/GET_FUNCAREA_CATALOG" not found.'
For queries i get 'Function module "/CRYSTAL/GET_QUERY_CATALOG" not found.'
What changes need to be performed to our SAP system to get these functions added?
Thanks in advance.Hi Joshua,
I did some checking so I changed my original reply. Those drivers are installed so nothing extra needed. I'm not completely sure how all of the Classic SAP data sources work but the only thing different is BW Query was removed in favor of MDX.
Also, the Transports are in a download package and must be installed onto the BW system. I'm checking what that means and where they are located.
The package for the BW server is located here:
<folder where I unzipped>\DATA_UNITS\CrystalReports\Collaterals\Add-Ons\SAP\Transports
Thanks again and sorry for the confusion...
Don
Edited by: Don Williams on Jul 11, 2011 10:59 AM -
SourceSet in function (Jscript) not found any Data View
HI,
I have the code:
var = oDB xfa.sourceSet.DataConnection.clone (1);
oDB.nodes.item (1). query.setAttribute ("text", "CommandType");
oDB.nodes.item (1). query.select.nodes.item (0). value = "SELECT * FROM vw_products";
oDB.open ();
oDB.close ();
This code works perfectly if I call in initialize the form.
(form1.Inicial::initialize - (JavaScript, both))
But the same code does not work if I call a function in Jscript, (Function test {} for example). Not found "sourceSet.DataConnection".
Any idea what could be? I've tried everything but it only works if i put in initialize the page.And a further example from my library of examples, just to help you out...
SQL> CREATE OR REPLACE TYPE num_descript AS OBJECT(num number, descript varchar2(30))
2 /
Type created.
SQL> CREATE OR REPLACE TYPE tbl_num_descript AS TABLE OF num_descript
2 /
Type created.
SQL> CREATE OR REPLACE PACKAGE reftest AS
2 FUNCTION pipedata(p_choice number) RETURN tbl_num_descript PIPELINED;
3 END;
4 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY reftest AS
2 FUNCTION pipedata(p_choice number) RETURN tbl_num_descript PIPELINED IS
3 v_obj num_descript := num_descript(NULL,NULL);
4 v_rc sys_refcursor;
5 BEGIN
6 IF p_choice = 1 THEN
7 OPEN v_rc FOR SELECT empno as num, ename as descript FROM emp;
8 ELSIF p_choice = 2 THEN
9 OPEN v_rc FOR SELECT deptno as num, dname as descript FROM dept;
10 END IF;
11 LOOP
12 FETCH v_rc INTO v_obj.num, v_obj.descript;
13 EXIT WHEN v_rc%NOTFOUND;
14 PIPE ROW(v_obj);
15 END LOOP;
16 CLOSE v_rc;
17 RETURN;
18 END;
19 END;
20 /
Package body created.
SQL> select * from table(reftest.pipedata(1));
NUM DESCRIPT
7369 SMITH
7499 ALLEN
7521 WARD
7566 JONES
7654 MARTIN
7698 BLAKE
7782 CLARK
7788 SCOTT
7839 KING
7844 TURNER
7876 ADAMS
7900 JAMES
7902 FORD
7934 MILLER
14 rows selected.
SQL> select * from table(reftest.pipedata(2));
NUM DESCRIPT
10 ACCOUNTING
20 RESEARCH
30 SALES
40 OPERATIONS -
CDMC - Function Modules not Found
Hi,
Initially the Solution manager ST level is 23 and CDMC clearning analysis worked will with ERP satellite system.
Later, Solution manager has upgraded with 24 and not able to actiavate the statistics and unable to perform clearning analysis.
Below are 2 known errors(there could be more),
Function Modules "CNV_CDMC_CC_GET_COMPS_OF_SYS" and "CNVCDMC_OBJECT_EXISTENCE_CHECK" not found.
Did any face this similar issues ?
Do we need to consider any component upgrade at Satellite systems with respect these upgrades in solution manager ?
Note: 3 of components are upgraded in solution manager which are ST , ST-A/PI and ST-SER...
Regards,Hello,
If you are on ST-PI SP03 this note is needed in all the participating systems of your CDMC project
1509340 - Collective Note with all corrections for CDMC (ST-PI SP03)
Also pleae review SAP Note 1348772 - CDMC Corrections - Composite SAP NotePlease look under Solution for Support Package 03 relevant Notes:
This will ensure that your system works without errors!
Regards,
Paul -
MSS Report Export to excel - ERROR - load: class query not found
Hi All,
I am navigating and getting error as follows:
Manger Services ->My reports -> Report Selection -> HIS Reports -> General -> Employee Details -> add some people and click start report -> report shows -> click local file -> save as spreadsheet get ERROR - load: class query not found in the status bar or IE and IE then locks up
Please reply if any one has some clue.
Thanks & Regards,
VishalHey Vishal,
This issue gave us a very hard time. The query was HRIS manager. when you add some attributes to be exported to excel and then select export. It hangs there. or hangs at the step where you select save as spreadsheet, OR after it where it runs a query to export.
I came to know that Java JRE is used in the last step. So for solving this issue, go to java.com, on the first screen there will be big link to install java(i guess JRE). install it and then try exporting your query. I am sure it will work.
Just notice that after doing installation of Java you will get coffee cup in you system tray.
Thanks.
Ankur.
P.S. Points if works.
Maybe you are looking for
-
Where is the Address Book data located
I am trying to pull in my contacts from a Palm Treo 755p and I was successful exporting it as a Vcard file. While I am able to open the file, I have not been able to import it into addressbook. I am trying to laocate where the data for addressbook is
-
Background color of Pageheader
Hi all, I searched on the standard documentation and several threads here, but I didn't find any reply to this specific problem. I need to change the background color of the Pageheader of a WDA modifying somehow a custom theme in the MIME Repository.
-
Screen resolution too high - text is tiny - how to change?
I'm a newbie to Audition, and spent 2.5 hours this weekend editing a 6.5 minute talk. Ended up with a massive headache, largely because of the small size of the text in the screen menues, etc. Anyone know how to change these? I Use a MS Surface 3 pro
-
Essbase Java API - Check if the cube is in read-only mode
Hello, I use "Essbase Java Api 11.1.2.0" to manage my essbase server. I made a script based on sample to make a cube in read-only mode and I have an exception when the cube is already in read-only mode. So is-it possible to check if the cube is in re
-
File.length() too slow?
I'm working on an application that needs to process directory listings on network fileserver, looking for files and directories, and getting basic info about files found (size, last modified date). I'm trying to use java.io.File.list(java.io.FileFilt