Excel 2013 not responding when doing refresh all for enbedded quires.

System:
Windows 8.1
Intel I7 620 CPU
12 GB ram
Office 2013
Issue 1:
I have a excel file with 29 data from WEB quires. These are quires for stock data and the only difference in them is the ticker symbol. When I request a refresh all Excel goes into a not-responding mode and I have to quit the program to stop it. This same
file ran OK in Excel 2010. I have the data on sheet one and about half the quires on sheet 2 and the remaining quires on sheet 3. Each quire downloads data a small table and cells in sheet one reference cells in sheet two and three. Two cells are accessed
from each table. I had a Microsoft support person on the line today and she had me repair office, which didn't help. I removed Sheet 2 and Sheet 3 and redid all the quires and that didn't help. Each quire can be refreshed individually. 
I also have a laptop with Office 2013 and Excel has the same problem with the same file.  
Issue 2:
Each row holds information about a given stock and gets current stock price and dividend percent from its quire table. The stock price comes from column A and the dividend percent come from column C two rows below the row the price is in. Every
time a do a refresh the cell that references the data in Column C comes from two rows below the row it should come from. This does not happen for every stock only some of them. The reference to the data from the A column is always correct. This problem was
happening in Excel 2010 too.

Hi,
To your first issue:
Excel 2013 not responding may be caused by some reasons. Let's do some tests to narrow down the issue:
Method 1: Verify/install the latest updates
Method 2: Start Excel in safe mode
Method 3: Investigate possible issues with add-ins
Method 4: Check whether your antivirus software is up to date or is conflicting with Excel
https://support.microsoft.com/kb/2758592/en-gb
If the issue still exists, please upload the event log in the thread, I'll do more deeply
research.
To your second issue, would you like to upload a sample of the Excel file by using SkyDrive? I want to test in my PC.
Regards,
George Zhao
TechNet Community Support

Similar Messages

  • Outlook 2013 not responding when creating a new email item in Windows 8

    This issue occurs intermittently. No add-ins are running. No anti-virus programs are running. Outlook does not respond and it must be restarted. This issue also affects reply email items and forwarding email items as well.

    Hi,
    Which type of email account are you using? POP3, IMAP or Exchange?
    If you are using a POP3 email account with an Exchange server account configured in the same profile, this issue may happen because the
    delivery folder selection is corrupt and you are referencing a nonexistent folder. To fix it, in Outlook 2013, click on the File tab >
    Info > Account Settings > Account Settings > Highlight your POP account, then click Change Folder. Select a proper folder to deliver to. For more information, please refer:
    http://www.slipstick.com/problems/outlook-crashes-when-you-reply-or-create-a-new-message/
    If above didn't apply, please follow the steps in the KB article below to troubleshoot the issue:
    http://support.microsoft.com/kb/2652320/en-us
    Hope this helps.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • Local EPM Excel Connection not responding when working with proxy server.

    Hi All ,
    We were working on a server . Due to some issues we had to use proxy server to connect to the Backend.
    But the Local Connections that were made in Excel to log in via EPM Tab is no more working.
    Is it something related to Proxy Server.
    In that case , how to configure the Local Excel Connections.
    Regards,
    SHUBHAM

    Hi Andy ,
    When we connect to EPM Office Add in link in Web Admin , We get basically 3 options, out of which we choose connect EPM Office Add-in for Excel. But that option is not coming. Rather it asks to install EPM addin, while it has been already installed . This problem has been present for a very long time .
    So in case of Connecting to  Excel Interface , if this option was fine then we could have easily gone to System generated link in Web Admin to connect to EPM Excel interface. But since this option isn't coming so we had to go through making Local Connections.
    But given the Proxy server settings the earlier Local EPM Excel Connections are not working.
    Regards,
    SHUBHAM

  • Firefox does NOT respond when trying to clear history, cache etc

    Firefox does NOT respond when trying to clear history, cache etc
    windows says not responding and I can not clear anything

    Look this one
    http://kb.mozillazine.org/About:config_entries
    go to PRIVACY and read the following
    privacy. item. cache
    privacy. item. cookies
    privacy. item. downloads
    privacy. item. formdata
    privacy. item. history
    in about:config all the above put it to TRUE if there are FALSE
    thank you

  • Photosmart C6180 on wireless network does not respond when attempting to print

    Photosmart C6180 successfully installed on wireless network does not respond when attempting to print.  All in one is successfully installed on wireless network and SW successfully installed on Windows XP computer yet printer does not print.  Get no error message other than document failed to print.  HELP!

    So gald I'm not the only one. I have been fighting this crappy HP printer for MONTHS also. Everything says a OK goody goody but printer fails to print every two to three weeks.

  • Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    Hello I have a problem with facebook Messenger disappeared from my desktop iPod in the AppStore it says "open" does not respond when I press it. What should I do to download it? But I do not have it in AppStore it says that I have it: (

    - Go to Settings>General>Usage>Storage>and under apps select FBM and try to delete it.
    Next:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Lots of programs does not respond, when opened

    Lots of programs does not respond, when they are opened, Apple store, Mail, Photo Booth and VideoConverterPro and some moor.
    To close, I have to click on finder first. What to do ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • All applications are not responding when wake from sleep.

    All applications are not responding when Macbook pro wake from sleep,
    the keyboard and touch pad are okay.
    Why?
    Thanks a lot.

    I want to see if there's a service that may be preventing it from working properly when waking from sleep. To test this, we'll need to Disable all non-system-critical services to see if the issue occurs.
    If it does not, that means one of those services that was disabled, is causing the issue.
    If the touchscreen is still unresponsive after sleep with all of those non-critical services disabled, then it may be something with the registry or the hardware. 
    Here are the steps to disable non-critical services:
    Windows + Q to bring up Search
    Type 'msconfig' and press Enter
    Click the Services Tab
    Check the Hide All Microsoft Services box 
    Click the Disable All button 
    Click Apply and Restart
    Once it restarts let it go into sleep mode and then wake it back up from sleep mode and test the touchscreen. Do this a couple of times, if you have time. (When you're done troubleshooting, you'll have to go back into msconfig and re-enable all of those non-critical services, apply and restart.)
    Let me know the results when you get a chance, please

  • I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

    I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
    I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
    help?

    command-option-esc keys and force quit Mail. Then relaunch.

  • The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    The pass 4 days now my iTunes Store is not responding, when I reload it all that comes up is a blank white page that says iTunes Store. Help please!!!! Cannot load my gift card to buy music and such!!!

    I tookyour suggestion and SUCCESS!  I can now access the Itunes Store.  A simple fix, and thanks so much!!.
    Below is the advice you forwarded:
    I found a solution to my problem.
    > start menu
    > accessories,
    > right click on the command prompt icon and choose "run as administrator".
    Once it opens, type in the following command...
    netsh winsock reset
    hit enter
    You should get a message that the winsock reset successful and you will need to reboot your computer.
    Reboot and when I reloaded itunes the store loaded fine.
    Thanks again, -Dean Stoneburner

  • When I try to open images I am getting this message: "The file "image.jpg" couldn't be opened because you don't have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?

    When I try to open images I am getting this message: "The file “image.jpg” couldn’t be opened because you don’t have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.iBooksX
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I pad does not respond when trying to turn on

    I pad does not respond when trying to turn on

    Charge the battery.
    Try restoring your iPad > iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

  • Hey software does not respond when I open a new file or an existing file

    Hey software does not respond when I open a new file or an existing file

    Nobody can tell you anything without system info and other technical details.
    Mylenium

  • My screen seems to have frozen and does not respond when I touch. I tried to shut it off and when the red slider comes up, it does not let me slide it off.

    My ipad screen seems to have frozen. I tried to turn it off and the red slider does not respond when I slide it. What can I do?

    Hold down the sleep and home keys for about 20 seconds. If you see the silver apple it's rebooting. Let it do that and see if you're unfrozen.

  • My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select.  Now I cannot open a file in my finder window by double clicking on it.  Any suggestions?

    My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select.  Now I cannot open a file in my finder window by double clicking on it.  Any suggestions?

    Did you reinstall CS3 after CC?
    For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
    And you shouldn't need to save as IDML after opening the .inx in CC.

Maybe you are looking for