Excel Addin Pull error from Essbase studio cube

Hi There,
I have cube deployed from essbase studio with dupilicate member name enable. however user gets error "unable to resolve duplicate name "2010" on line 1" error when using Excel addin and SmartView. I guess I have year 2010, also have account 2010, but it build and deploy fine.
Any suggestion?
Many thanks
Edited by: Donny on Jul 28, 2011 5:29 PM

I think I figure it out

Similar Messages

Deploying Cube from Essbase Studio

Hi,
I am fresher and I am a student and I am trying to study Oracle Hyperion Essbase Studio. I have a problem when I am trying to Build outline and load data from Essbase studio ->Cube Deployment option.
Failed to deploy Essbase cube.
Caused by: Cannot end incremental build. Essbase Error(1007072): Member [keyboard] tagged as <REFER does not have a member to refer to
\\Record #1 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~karnataka) to member (karnataka)
karnataka karnataka banglore banglore 457787 457787
\\Record #2 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~Maharashtra) to member (Maharashtra)
Maharashtra Maharashtra Pune Pune 411043 411043
\\Record #4 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~Maharashtra) to member (Maharashtra)
Maharashtra Maharashtra Pune Pune
\\Record #5 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~maharashtra) to member (maharashtra)
maharashtra maharashtra pune pune
\\Record #6 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~Maharashtra) to member (Maharashtra)
Maharashtra Maharashtra pune pune 441205 441205
\\Record #7 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#545#0@#~Gujrat) to member (Gujrat)
Gujrat Gujrat 123456 123456
\\Record #8 - (3345) Error setting ID (#~@12#0#196#0@#~@3#0#562#0@#~maharashtra) to member (maharashtra)
maharashtra maharashtra mumbai mumbai 433653 433653
Edited by: 980685 on Jan 8, 2013 11:30 PM
Edited by: 980685 on Jan 8, 2013 11:31 PM

Hi All,
Towards this error if we are talking about Hyperion Essbase - Version 11.1.2.1.000 and later.
So mostly we are facing this issue has been verified as unpublished Bug 12967639.
As documented in KM:
Unable to Save ASO Outline After Renaming Members, "Error(1007072) Member [xxx] tagged as <REFER does not have a member to refer to" [ID 1465850.1]
Also towards ASO there is another document having all there as:
Oracle Hyperion Essbase and Aggregate Storage (ASO) [ID 1291202.1]
Thanks,
Shaker

Can't Login from Essbase Studio

Hello Everyone,
I am new to Essbase. I have successfully installed Essbase in Unix server. But when i tried to login from essbase studio which I have installed in windows. I got the following error from log files in the server.
[ESSBASE0] [ERROR:32] [TCP-17] [] [ecid: 1361889277748,0] [tid: 1098848576] Network error: Timed out before receiving all data
and I got following error in the client side
Error Connecting to Essbase Studio Server
Reason :
Network Error
ps: I can ping to the server and also login to Essbase Administration Services

Hello John,
I can also connect ./start_BPMS_bpms1_CommandLineClient.sh from command line in Unix server. But i couldn't connect from my studio console install in windows.
I am getting the following error.
Network communication with the server failed. Check your network connection and try again.
Connection timed out: connect
Help!!!
Edited by: Khadka on Feb 28, 2013 9:34 PM

Teradata connectivity from Essbase Studio

Hi all,
We are trying to connect connect to Teradata server from Essbase studio console from Windows.
The Essbase Studio server is on Linux. We can ping to the Teradata server both from Windows ad Linux.
But when we enter the server name, user name and password, it tells connection can't be established.
We have put the Teradata jdbc driver jar files inside the EssbaseStudio server directory.
We are getting same connection can't be established error in the Essbase Studio server logs.
Do we need to put the jar files somewhere in Windows as well?
Can someone help?
Thanks.

I assume you looked at http://download.oracle.com/docs/cd/E17236_01/epm.1112/est_user.pdf in the admin section. There is another thing, In the Essbase.cfg file is a section that looks like
BPM_Oracle_DriverDescriptor "DataDirect 6.0 Oracle Wire Protocol"
BPM_DB2_DriverDescriptor "DataDirect 6.0 DB2 Wire Protocol"
BPM_SQLServer_DriverDescriptor "DataDirect 6.0 SQL Server Native Wire Protocol"
;BPM_SQLServer_DriverDescriptor "SQL Server"
;BPM_Netezza_DriverDescriptor "NetezzaSQL"
BPM_Teradata_DriverDescriptor "Teradata"
;BPM_ORACLEBI_DriverDescriptor "Oracle BI Server 11g_OHXXXX"
;BPM_ORACLEBI_DriverDescriptor "Oracle BI Server"
BPM_MySQL_DriverDescriptor "DataDirect 6.0 MySQL Wire Protocol"
make sure teradata is not commented out.

MaxL script deploy essbase studio cube

Hi There,
I am testing my MaxL script deploying cube from essbase studio, here is result from my cmd windows:
BPM connect status: success
BPM maxL deployment ... succeeded with warning.
How do I find out the detail about the warning? I assume it is essbase studio log at C:\Hyperion\logs\esbstudio
But I did not see any warning message.
Thanks

Thanks John and Glenn, I just check my app log, the warning I found is:
Warning(1013254)
Hybrid Analysis spanning cannot be enabled on database [test] in application [test]. Check if the database has Hybrid Analysis and if span into relational source is enabled.
I am not sure I understand this.

Essbase Studio Cube Migration

Hi All,
We have a requirement where we want to migrate our Essbase Studio Cube from one environment to another. We want to migrate the entire catalog/models/cube/data.
Can anyone mention the correct sequence to follow.
(Version: 11.1.1.3)
I was trying to search this in forum; I found that the cubes can be migrated via LCM while the catalog migration is difficult.
Also please verify my understanding:
1. LCM cannot be used for Studio v11.1.1.3.
2. The catalog export/import option is not available for v11.1.1.3. It was introduced for v11.1.2.
Any response will be highly appreciated.
Thanks.

LCM still does not support studio in 11.1.2.2
11.1.2.0 Studio New Features - "In this release, you can replicate the Essbase Studio catalog database among different machines for various administrative purposes, such as making catalog backups, restoring the catalog, and moving the catalog from one machine to another. Essbase Studio now provides an option to export the catalog into an XML file. This file can then be imported to a new location or a different machine to recreate the catalog. You can selectively copy some catalog objects, export to an XML file, and then recreate these objects in a new location or on a different machine."
Cheers
John
http://john-goodwin.blogspot.com/

Essbase Studio Cube Deployment SQL Connection Error

Hello,
Has anyone seen this error in studio.
Failed to deploy Essbase cube
Caused By: Failed to build Essbase cube dimension: (Accounts)
Caused By: Cannot incremental build. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
I connected to the SQL database without issue creating the data source and I can view the sample data on the dimension element. The only time I have a connection issue is during cube deployment. The log is no help.
Thanks

Hi Celvin
Thanks for your reply.
I can connect from the same Essbase Server from the data source connection used in the Essbase Studio console.
I am not using any encrypted passwords.
I can log into MaxL with no issues, but running trying to execute the following command is where I get the error.
deploy all from model 'GL_Analysis' in cube schema '\ANALYSIS\Schema\Schema' with option delete_members login $1 identified by $2 on host 'server1' to application 'test1' database 'test1' overwrite values using connection 'essbaseserver' keep 200 errors on error ignore dataload write to default;
It allows me to connect and deploy sucessfully using the Maxl installed from the Essbase client version 11.1.2.2. However running the MaxL installed from the Essbase client MaxL version 11.1.2.3 seems to provide me with the connection issue. I am trying to determine if it is a bug or something that was missed during upgrade process.
Currently we need to deploy via the Studio.
Thanks.

SSRS pulls data from ESSBASE cube, data not showing

Dear Experts,
We are connecting SSRS 2012 to Essbase 11.1.3 to pull data from the cube, and having some issues with some members data not showing in the query designer and report, while some have no problem. And we couldn't find a pattern on which members won't show. We are wondering if this is a known issue and if there is a way to solve the problem.
Thanks very much.
Grace

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

Essbase Studio Cube Deployment Error

Hi,
I am trying to deploy a cube using essbase studio 11.1.1.3.00. I am getting this error.
\\Record #1203 - Unable to write smartlist 801990, error code 1060301
Any ideas what the issue is? I can't find anything on the error and I don't have any idea what smartlist would have to do with the deployment.
Thanks in advance

Hi,
I assume that the Essbase studio version is 11.1.2 and above.
The error is caused by the Essbase Studio Server failing to establish a connection with the SQL Database Server and you can try the following:
1) Back up the server.properties file and alter it in the following manner:
Change the server.essbase.streamingCubeBuilding=true to server.essbase.streamingCubeBuilding=false (use Essbase drivers)
2) Set the ODBCINST variable to point directly to odbcinst.ini
3) Then, the BPMS service should be restarted.
The file is named:
startBPMS_bpms1_Server.bat on Windows;
startBPMS_bpms1_Server.sh on UNIX.
Note:
The Essbase Studio Server startup file contains the commands necessary to start Essbase Studio Server. During the configuration process , the EPM System Configurator writes information to the startup file about the computer on which Essbase Studio is installed so that Essbase Studio Server can start properly. Oracle recommends that you do not manually edit the startup file.
The start up file is installed by default in:
MIDDLEWARE_HOME/user_projects/epmsystem1BPMS/bpms1/bin
KosuruS

Loading the data from essbase studio to the cube

I am building application using Essbase studio 11.1.2
I have been able too create the hierarchies, but I am not clear on the process of assigning the data piece.
In this instance all data is in a table named “FullPolicyCount”
What is the process for a successful load of the data to the cube
Please advise

Hi,
take a look into psa data. The key is defined by the request, the record number, the data packet and the change indic. Use the same key for your ods/dso and you will get all records to your ods/dso. Use update mode overwrite for the keyfigures (but just because it is the default). With the obove mentioned key it doesn't matter if your update mode is overwrite or addition.
regards
Siggi

Data load error in essbase studio

I get the following error when trying to load an ASO cube using Essbase Studio (EPM 11.1.2). This error doen't seem to be documented in any of the Essbase manuals. Question - does this error indicate an essbase server issue or a data source issue? I'm thnking it's datasource related, but my data source is an Oracle database, which I've used previously to load cubes without a problem. I've refreshed the source and can connect to it fine otherwise.
Error:
Data load started at: Fri Dec 03 08:52:21 EST 2010. Data load elapsed time: 10 Minutes 23 Seconds.
Failed to deploy Essbase cube.
Caused by: Failed to load data into database: 8020.
Caused by: Cannot execute a SQL query
Caused by: Io exception: Socket read timed out
Caused by: Socket read timed out
Appreciate any hel with this issue.

When I have issues with Studio I try to break it down slowly. I build my dimensions one at a time. If it breaks on a single dimension build I trace the issues backwards and usually find my issue in the schema.
Studio's role in life is to create SQL load rules and as such depend on a good schema definition. Unforntunately, the dimension build rules can't be opened in EAS with the Dataprep Editor (regular load rules) because they're binary and can do things that a normal load rule cannot (text measures, date measures, time varying attributes, etc.). But that doesn't mean the .rul files are un-readable. If you're having trouble with a particular dimension build process, open the load rule it creates with something like Notepad and grab the SQL that Studio is generating and drop it into Toad (or equivalant) to see if it is generating usable code. If not, there's something wrong with your modeling and you need to go back to the mini-schema.
When you're able to build all dimensions all at the same time, you're almost there. If your issues comes when you want to build and load data, the final debuging steps go quickly. Towards that end, the data load rules (ones that load data vs. building dimensions) generated by Studio can be edited in EAS using the Dataprep Editor. If you know SQL Load Rules, you should be able to figure out. If not, contact John Goodwin, OCS or a partner and set up a consulting visit.

Rejected record message from Essbase Studio load (3355)

I receive the following error when deploying an outline via Essbase Studio to an ASO cube (ver 11.1.2):
\\Record #36798 - Member XXX does not exist. Reference member column types require the field to be an existing member (3355)
As I read the error (BTW, can someone help me find the table of rejected record codes?), it is rejecting the assignment of an attribute to a member because the member does not exist.
What could be a reason though that I did not receive an "Error adding member XXX" rejection beforehand or something indicating that there was an error adding the member originally? I am puzzled because I cannot find anything special about the source data when comparing to the many others that loaded successfullly.

Hi All,
Towards this error if we are talking about Hyperion Essbase - Version 11.1.2.1.000 and later.
So mostly we are facing this issue has been verified as unpublished Bug 12967639.
As documented in KM:
Unable to Save ASO Outline After Renaming Members, "Error(1007072) Member [xxx] tagged as <REFER does not have a member to refer to" [ID 1465850.1]
Also towards ASO there is another document having all there as:
Oracle Hyperion Essbase and Aggregate Storage (ASO) [ID 1291202.1]
Thanks,
Shaker

Essbase Studio Cube Stores data as integer, drops decimals

I have an Essbase cube that I am developing in Essbase Studio 11.1.2.1. If I preview the data in Essbase Studio I can see the decimals for the number. However, when I deploy the cube the numbers are not stored in the Essbase cube with the decimal places. So for example I have a value of 106,257.58 on a certain intersection of data that I can see when I preview the data. However, when I querry the data in the cube after it is built it shows as 106,527.00. It is not rounding up, but instead just dropping the decimals.
I have also noticed that if I take a numeric field and do a math equation in the dimmension element, when I preivew the data in key bindings it also drops the decimals. But if I view the data in caption bindings the decimals show.
Is there a global setting where the numeric format is set? It almost seems like it is default to store numeric fields as integers and not with decimals. Any help is appreciated.

The first error is because you have the dimension set as stored either change it to multiple hierarchies or dynamic and it will allow shared members
The second error is because the first instance is getting tagged as the shared member. in 11.1.2 this is changed so Essbase automatically detects this issue and corrects it automatically
You are probably getting it because both your primary and secondary hierarchies are getting build intermingled
suppose you have your example
PRODUCT (Gen1)
Soda (Gen2)
123 (Gen 3)
747 (Gen 3)
Juice (Gen2)
555 (Gen 3)
747 (Gen 3) (shared member)
Water (Gen2)
111 (Gen 3)
747 (Gen 3) (shared member)
If you build this as a parent child recursive build and the order of your data file is
Parent Child
Product Soda
Product Juice
Product Water
Juice 747
Soda 747
yiou see it would add the 747 to juice first so the Soda would get shared. You would need to change it so the Soda 747 would be seen first

Newbie questions regarding pulling data from hyperion planning cube w/OBIEE

Hello there,
we've recently implemented Essbase and are currently pumping it full of revenue/expense data from out source systems to calculate NOI. This data is stored in a staging table at the detail level where it is sourced into Hyperion and aggregated. We also have OBIEE 10g (plan to upgrade to 11g later this year) and we would like to connect to and report out of Essase. Our ultimate goal is to be able to report on the NOI numbers in the planning cube but have the ability to drill down to the detail level which is not stored in Essbase. We've heard it is possible, albeit not native for OBIEE 10g to do this. We've also heard that it is not best practice to use our transactional cube for this type of reporting but to actually create a second "reporting cube".
What are best practices for getting this NOI data out of Hyperion and merging it with our relational detail reporting? Can we somehow export the data from the cube and store it in a relational database? Should we clone the cube (if even possible) and configure both it and our relational source in the BI repository and setup all drill-throughs there?
Any info is GREATLY appreciated. Thank you.
Edited by: cisGuy on Sep 20, 2010 5:31 PM

i have found information on how to use ODI to extract data for the cube. What I'm really trying to find out though is best practices for reporting off summary level data in Essbase with the ability to drill-through to the detail.
We've heard reporting off the same cube that users are writing back and transacting on is bad. Do we need to make a "reporting cube" and then bring that in OBIEE and merge it with a relational source or is it better to extract the data from Essbase into flat files and join it to detail tables in our relational source?

Physical Path for Essbase Studio Cubes

Hi All,
I have one doubt regarding Cubes developed in Essbase Studio.I want to know the extact phyical existance path for Essbase Studio.
Currently we have an space constraint for Essbase Studio in Server.So,Is there any possibility to change the cube path in Essbase Studio where we have sufficient space.
Can some one provide assistance for this issue
Thanks,
SatyaB

Hi All,
Currently Iam facing with Cube space allocation.
Essbase Applications is installed in D: .Currently D: has only 2GB Disk Space only. So, They want to point out the applications in E: drive which contains sufficient space.
Can someone suggest me where I have to make changes in settings to build and load the cube in E: instead of D: drive.
For your reference
1. Building and Loading of cube is happening through Essbase Studio.
2. EPM Version : 11.1.2 (Platform : Windows)
Should I need to make changes in EAS Console edit properties. Please Advise. Thanks in Advance.
Thanks,
SatyaB

Excel Addin Pull error from Essbase studio cube

Similar Messages

Maybe you are looking for