Excel does not open after OPEN is clicked after a while

Hi ,
I am generating a excel report using Java servlet. The report works fine as of now with out any issues. When the link is clicked the dialogue box comes and when open is clicked immediately the excel is opening with out any problem.
Here is the issue when i wait for a while says about 30 to 40 seconds and click on the open button the excel is not opening. I get no reponse.
Please help
KG

One thing that might help is to reset and/or restore the iphone.
Here are a couple of articles from the apple support website that might help out.
http://support.apple.com/kb/HT1737
http://support.apple.com/kb/HT1414
You might need to reset and or restore the iphone to resolve any software issues.
Hope this helps.

Similar Messages

Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

I have been a happy user of Firefox for many years. Around last April first I opened Firefox and was offered an update to v 4.42.0.0 which I accepted. Installation seemingly went well. I forget now exactly what happened but the result has been that ever since April 1 I haven’t been able to open the Firefox browser when clicking on the Firefox icon. My computer now was running very slowly. I tried to uninstall Firefox, but a popup told me I couldn’t because Firefox was in use. This confused me because I couldn’t see it being used. Only now I have found that on Task Manager processes that “firefox.exe” was consuming 99 % of the CPU. After removing firefox.exe by clicking End Process my computer ran better. I uninstalled Firefox I had on my computer and installed Firefox 5.0. Unfortunately I have the same problems: Firefox does not open when clicking on the icon, the firefox.exe process consumes 99 % of the CPU and my computer runs slowly.

Born2die! Brilliant. I am a desktop clicker and never knew Firefox had a safe mode.
Thank You!
I was unable to start in safe mode initially. The second time I disabled all of the Add-Ons and she started up just fine. I enabled them one by one hoping to track down the culprit but the problem seems to have gone away.
BTW I am running ver. 3.6.8 (in response to cor-el's earlier post) and
Firefox is in the process of downloading 3.6.10 (which I am starting to think may have been what caused this whole problem to begin with)
Incidentally, whats up with all of the Java Console Add Ons?
I have:
Java Console 6.0.11, Java Console 6.0.13, Java Console 6.0.15
Java Console 6.0.17, Java Console 6.0.20, and Java Console 6.0.21
What are they? Do I need them? Can I uninstall them? Is this due to using Open Office?
Also, .NET Framework 0.0.0 Should I uninstall it?

Iphoto does not open, i click and it just "jumps" one time at the dock version:iphoto`09 8.1.2(424)

iphoto does not open, i click and it just "jumps" one time at the dock version:iphoto`09 8.1.2(424)

Back up your iPhoto library, Depress the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
LN

Folder in TOC does not open on click in Firefox 3

On firefox 3, when i click on the folder icon in the TOC, the
folder does not open to show the topics.
The Stats
1. Robohelp 7
2. Using Custom Skin (though the problem exists even when I
am not using a skin)
3. Problem exists only on Firefox 3. Works ok on IE
Any help will be much appreciated

I'm seeing the same problem. I looked on your web page under
browsers, at item
11] TOC Books do not open in Firefox
and it says "fixed in 7.0.1". My colleague who is seeing the
problem is running 7.00.145. Because of the funny numbering I can't
tell which version comes before the other.

Cluster does not work after a while

Hi :
          I have 2 clustered EJB server, the IP address is 192.168.0.226 and
          192.168.0.227.
          A servlet server is calling these two EJB servers with
          t3://192.168.0.226,192.168.0.227:7001
          All three machine use weblogic 5.1 sp9, Win2K Advanced Server.
          If I restart weblogic service, then the cluster works fine. but after while
          the cluster does not work, all the client request goto only one machine, in
          most case it's 227.
          It has no use even if I restart the service in the losted server. I have to
          restart all the server.
          The weblogic.log in the losted server is like this :
          Thu Apr 26 00:04:16 GMT 2001:<I> <RJVM> Signaling
          peer -6817319611378695685S192.168.0.204:[7001,7001,7002,7002,7001,-1] gone:
          weblogic.rjvm.PeerGoneException:
          - with nested exception:
          [java.io.EOFException]
          Thu Apr 26 00:04:47 GMT 2001:<I> <RJVM> Signaling
          peer -2123734719233546013S192.168.0.227:[7001,7001,7002,7002,7001,-1] gone:
          weblogic.rjvm.PeerGoneException:
          - with nested exception:
          [java.io.EOFException]
          Thu Apr 26 00:14:16 GMT 2001:<E> <ConMan> Attempt to sendMsg using a closed
          connection
          Thu Apr 26 00:14:16 GMT 2001:<E> <RJVM> Exception on send :
          weblogic.rmi.ConnectException: Attempt to sendMsg using a closed connection
          Please help me
          thanks
          andrew


Are you running with any proxy? Is the servlet server also the static httpd
          server?
          What type of network equipment are you using? If its high-end (Cisco) make sure
          all ports are set to 100/Full.
          Also, try setting the SendDelay slightly higher (ie. 25, 30, 35). Experiment
          with different values.
          weblogic.cluster.multicastSendDelay=25
          andrew wrote:
          > Mike, thanks for reply
          > The 192.168.0.204 is the servlet server.
          > I changed the NICs to use 100Mbps/Full duplex. it looks better: the error
          > msg is less than before, the it still happened.
          > Any suggestion?
          > thanks
          > andrew
          >
          > "Mike Kincer" <[email protected]> wrote in message
          > news:[email protected]...
          > > Which box is 192.168.0.204 ??
          > > It is communicating via multicast, which I would say is suspect.
          > > Otherwise, I'd say you have some network issues.
          > > Make sure all switch ports and all NICS are NOT set to "auto" config.
          > Select
          > > 100Mbps/Full duplex on all ports.
          > >
          > > andrew wrote:
          > >
          > > > Hi :
          > > > I have 2 clustered EJB server, the IP address is 192.168.0.226 and
          > > > 192.168.0.227.
          > > > A servlet server is calling these two EJB servers with
          > > > t3://192.168.0.226,192.168.0.227:7001
          > > >
          > > > All three machine use weblogic 5.1 sp9, Win2K Advanced Server.
          > > >
          > > > If I restart weblogic service, then the cluster works fine. but after
          > while
          > > > the cluster does not work, all the client request goto only one machine,
          > in
          > > > most case it's 227.
          > > >
          > > > It has no use even if I restart the service in the losted server. I have
          > to
          > > > restart all the server.
          > > >
          > > > The weblogic.log in the losted server is like this :
          > > >
          > > > Thu Apr 26 00:04:16 GMT 2001:<I> <RJVM> Signaling
          > > > peer -6817319611378695685S192.168.0.204:[7001,7001,7002,7002,7001,-1]
          > gone:
          > > > weblogic.rjvm.PeerGoneException:
          > > > - with nested exception:
          > > > [java.io.EOFException]
          > > > Thu Apr 26 00:04:47 GMT 2001:<I> <RJVM> Signaling
          > > > peer -2123734719233546013S192.168.0.227:[7001,7001,7002,7002,7001,-1]
          > gone:
          > > > weblogic.rjvm.PeerGoneException:
          > > > - with nested exception:
          > > > [java.io.EOFException]
          > > > Thu Apr 26 00:14:16 GMT 2001:<E> <ConMan> Attempt to sendMsg using a
          > closed
          > > > connection
          > > > Thu Apr 26 00:14:16 GMT 2001:<E> <RJVM> Exception on send :
          > > > weblogic.rmi.ConnectException: Attempt to sendMsg using a closed
          > connection
          > > >
          > > > Please help me
          > > > thanks
          > > > andrew
          > >
          > > --
          > > /\/\i|<e
          > >
          > > Mike Kincer
          > > Solutions Developer/Engineer
          > > Atlas Commerce "ebusiness evolved"
          > > Office phone: +1-607-741-8877
          > > mailto:[email protected] [http://www.atlascommerce.com]
          > >
          > >
          /\/\i|<e
          Mike Kincer
          Solutions Developer/Engineer
          Atlas Commerce "ebusiness evolved"
          Office phone: +1-607-741-8877
          mailto:[email protected] [http://www.atlascommerce.com]

8.1SP2 Webserver does not respond after a while

Hello,
I've had this happen several times. Nothing in the logs shows anything
strange. It logs the HTTP requests coming in, but does not return a
response.
The process is still running, and the applications can connect to the
port, but they hang on waiting for a response.
My setup:
Redhat Linux 9 w/ Weblogic Server 8.1 SP2
I'm trying to connect to the /console app, but have also tried to access
the / directory to make sure it wasn't just the console that was hung.
Thanks

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

New tab does not open when clicking on + tab

I'm trying to open a new tab. I click on the + tab and nothing happens

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Report Generation for Excel does not work after using the Application Builder

I have a VI that writes data to an Excel file using the Report Generation Toolkit. I recently compiled the VI into a single Application (EXE) using the Application Builder. My VI runs its tests properly, but no data is written to Excel. What could be the cause? I don't receive any error messages.

Hi
I usually build exe-files, which sometimes also have report functionality.
Open the Application Builder and check the following things:
1. Add the following vis: _Word Dynamic VIs.vi, _Excel Dynamic VIs.vi They should be located in the directory ..\LabVIEW X.X\vi.lib\addons\_office in the llbs _wordsub.llb and _exclsub.llb (report1.jpg)
2. If you use an Installer, go to the Advanced Settings. There you can select some things to include in the Installer. Check if "NI Reports Support" is selected. (report2.jpg)
These are the things I always do, if I need reports and I never had problems up to now. I made two screen-shots of these settings.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
report.zip ‏25 KB

Application with excel does not work after installing. Cause is excel report generation

First of all, yes i have selected the installer and included the NI report support. I can run and install the application buth the application freezes when handling an excel-related VI. I can still run the program in Labview and it works fine buth i want to use an exe because i have seen that it works considerably faster.
Thanks,
Andries Wim

wim andries student wrote:
> First of all, yes i have selected the installer and included the NI
> report support. I can run and install the application buth the
> application freezes when handling an excel-related VI. I can still
> run the program in Labview and it works fine buth i want to use an exe
I won't be able to help you with the Excel problem. I do not like Active
X and don't deal with it if I don't absolutely have to.
But your claim that the executable runs considerably faster given the
same hardware and system resources definitely sounds suspicious. LabVIEW
has very little speed difference between the development system and an
executable. The difference is so small that you almost never should be
able to even notice it. If it is very notica
ble there are other reasons
that it is faster, for instance failed initialization for whatever
reasons, which makes subsequent functions to simply skip their task
instead of doing something.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Interactively changing values to table problem: indicator and control table, and why it does not work after a while...?

I have been producing a VI that loads a set of data and displays it in a table: A table control is initialised with an empty variable, the loaded data takes the place of the variable and fills the table, while some headers are added. That table feeds an intensity graph to give a pictorial impression of the data.
With this scheme, a user can change any value of the table, and the changes are interactively reflected on the graph.
Problem: after few saving of the VI, the access to the table doesn't work anymore. It is the same with all my numerical controls in the VI where it should be possible to enter a value.
If anybody has an idea on the potential
causes of these problem, I would be really grateful as it is very useful...when it works !
Regards,
Elie Allouis

I can not image what is causing the error. Would you be willing to post some code to see if we can reproduce the problem?
Jeremy7

Book icon not opening when clicked

I have an odd problem here.
In my Contents tab on the left side, I have eight Book icons
that, when clicked, open to reveal the Help topics inside them-
just like any normal RoboHelp project would work. However, the very
last Book icon in the list does not open when clicked. I checked
the original file and all of the help topics are under the Book
like they should be. When I compile the file and do a View Primary
Layout, this last Book icon opens correctly. The problem only
occurs once the project is built into the software I'm doing the
Help for. When I move the Book icon up in the list (so it's not the
last one anymore) it works correctly. But then the Book icon that
becomes the last icon doesn't open when clicked. So whichever Book
icon is last in the list doesn't open when clicked. Anyone have any
clue what would cause this? Thanks alot.

Hi Scott45 and welcome to the RH community.
Have you tried deleting the book and adding it again? Also
you can open the project's .HHC file in Notepad (or something
similar) and check that the relevant TOC entry is displayed
correctly there.

Iphoto application does not open

Installing all updates within one week of release. Last month March 2015 installed all current updates and I do not recall the exact update but there was one that allows for a future iPhoto app to be readied to use with the new release of Yosemite 10.10.3 but as of now my iPhoto application does not open. Clicking on icon in applications does not work. Whats going on ?
iMac 21.5" 2011 v. 10.10.2 Everything has always worked until now

What happens when you try?

After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up.

I am using MacBook Air with Yosemite OS. After mistakenly clicking a link, my safari does not open automatically and unexpected webs open up. Could you please give me suggestions on how to fix this problem? Thank you

That's a bit vague, but you may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates
if it's not already checked.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.

Using office outlook under parallel desktop double click on an Excel attachement does not open the document in Excel

using office outlook under parallel desktop double click on an Excel attachement does not open the document in Excel.
double-click opens Excel Office 2011 for mac without the document.
It should open the document in Excel 2010 for Windows.

In Parralells, choose the file you want to open.
Right Click on it and choose Properties.
In the General Tab you will see "Opens with:"
Click the "Change ... " button.
Then choose Excel 2010. The checkbox below should be set to "Always use ... "

Excel does not open after OPEN is clicked after a while

Similar Messages

Maybe you are looking for