Excel Download correct and upload
Hi Oracle Apps Design Gurus,
We are involved in designing an application involving download , correct and upload of quotes data. The specific s of the requirement are:
1. Extract Quotes data: Buyer runs a process to extract Quotes data with select parameters.Selected Quotes data extracted in spreadsheet format.
2. Update extracted Quotes data: Buyer updates the Quote data in Excel. Updated Quotes data is ready to be uploaded into Oracle.
3. Upload modified Quotes data: Buyer uploads the spreadsheet with updated Quotes data into Oracle. Updated Quotes data is loaded in to Oracle. Exceptions are output in a report.
Some of the constraints of this design:
1. Client has only e-business suite license. No other oracle tools which require license may be used.
2. Client wants to achieve this within the standard framework as far as possible.
3. Complex navigation from one form to another is not wanted.
The first thing that occured to us was the use of Oracle Web ADI for this. But we are not sure as to how that can be used to download correct and upload in the same spreadsheet.
We will be much grateful for any help in desgning this or any alternative approach to the problem.
Thanks,
Avi
Step one: Visit http://www.giganews.com/line_info.html and post up the Traceroute the page shows, if you wish. Be aware that your non-bogan public IP Address will show up. It might shown up as the final hop (bottom-most line of the trace) might contain a hop with your IP address in it. Either remove that line or show only the first two octets. What I'm looking for is a line that mentions "ERX" in it's name towards the end. If for some reason the trace does not complete (two lines full of Stars), keep the trace route intact.
For example this what I saw when I was using Verizon
news.giganews.com
traceroute to 71.242.*.* (71.242.*.*), 30 hops max, 60 byte packets
1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 13 ms 13 ms 13 ms
2 ash-bb1-link.telia.net (213.248.70.241) 39 ms 7 ms 7 ms
3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 4 ms 4 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 4 ms
4 so-7-1-0-0.PHIL-CORE-RTR1.verizon-gni.net (130.81.20.137) 6 ms 6 ms 6 ms
5 P3-0-0.PHIL-DSL-RTR11.verizon-gni.net (130.81.13.170) 6 ms 6 ms 6 ms
6 static-71-242-*-*.phlapa.east.verizon.net (71.242.*.*) 32 ms 32 ms 33 ms
Step two: Can you provide the Transceiver Statistics from your modem?
#3 If you don't know how to get that info:
a) What is the brand and model of your modem?
b) If you have a RJ-45 WAN port router connected to it: What is the brand and model of the RJ-45 WAN port router?
#4 If you have a RJ-45 WAN port router connected to the modem, even if you know how to get the Transceiver Statistics from the modem: What is the brand and model of the RJ-45 WAN port router?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.
Similar Messages
-
My music file did not download correctly and stops playing after a few seconds.
My music files did not download correctly from itunes and stop playing after a few seconds.
Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library and then download again from your purchased history. If the problem persists, or that facility is not available in your region contact the iTunes Store support staff through the report a problem links in your account history.
tt2 -
Can Someone please help me understand why I just got scammed by Itunes for purchasing a song and not being able to download it because it autmatically makes me download it as the old file that I already purchased instead of rebuying it which is not working either.
I'm very troubled by this issue because I have been purchasing music from the ITunes Store for years but the problem basically is that when I try to buy the one song again it says I have already purchased it so it automatically downloads it when I try to buy it again which continues the same problem and I tried to hide it from the purchase menu and that did not work i unhid it and the problem seems to continue can anyone kindly please help me figure out what I did wrong because I'm sure its ITunes Store's fault on this one.
-
I have an I-phone 4. I downloaded an audiobook onto it and after an hour and a half, it stops playing. I tried to transfer the audiobook to my computer hoping to redownload it but only 1.5 transferred. I cannot even listen to it on my computer. Any ideas how to redownload?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
arc357 wrote:
The computer does not recognize the phone at all.
Also see > http://support.apple.com/kb/TS1538 -
Can anyone advise on how to make the picture you select display on the main screen (Loupe view)?
Might be hardware failure. Take the iPhone to the nearest Apple store
for evaluation. Make a Genius Bar appointment to avoid delay at the store.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/ -
Hi experts,
i want to download hierarchies from production bw to development bw. pls explain me the procedure how to do. as i understand hierarchies will be in the r/3 system. then how do i download them and upload them to the required box in bw. is there any function module for downloading and uploading hierarchies.
Pls help.....Hello,
To execute the program you have to run it in transaction se38.
Check if you have it since it is Z you might not have it.
If you don't find it create in se38 a new program with the following code:
*& Report Z_SAP_HIERARCHY_DOWNLOAD *
* SAP Consulting BW Tools:
* Download hierarchy into a flat file. The file has the correct format
* for uploading into BW via a hierarchy InfoSource (IDOC).
* (c) SAP AG 2003-2004 MFB, SAP Labs LLC
* created: 2003-07-23
* last update: 2004-05-02
* Text elements:
* P_DATES Include from/to dates
* P_DATETO Valid-to date
* P_FNAME File name
* P_HIENM Hierarchy name
* P_INTER Include from/to leaves
* P_IOBJNM InfoObject
* P_LANGU Language
* P_VERS Hierarchy version
REPORT z_sap_hierarchy_download.
TYPE-POOLS: rs, rsdm, rrh1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
p_iobjnm TYPE rsdiobjnm MEMORY ID rsc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS:
p_hienm TYPE rshiedir-hienm,
p_vers TYPE rshiedir-version,
p_dateto TYPE rshiedir-dateto,
p_langu TYPE rshiedirt-langu.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME.
PARAMETERS:
p_fname LIKE rlgrap-filename,
p_dates AS CHECKBOX DEFAULT 'X',
p_inter AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b3.
* File structure
TYPES:
* No dates/intervals
BEGIN OF y_s_hierfile_1,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_1,
y_t_hierfile_1 TYPE STANDARD TABLE OF y_s_hierfile_1,
* With dates
BEGIN OF y_s_hierfile_2,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
dateto TYPE rsdateto,
datefrom TYPE rsdatefrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_2,
y_t_hierfile_2 TYPE STANDARD TABLE OF y_s_hierfile_2,
* With intervals
BEGIN OF y_s_hierfile_3,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
leafto TYPE rsleafto,
leaffrom TYPE rsleaffrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_3,
y_t_hierfile_3 TYPE STANDARD TABLE OF y_s_hierfile_3,
* With dates/intervals
BEGIN OF y_s_hierfile_4,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
dateto TYPE rsdateto,
datefrom TYPE rsdatefrom,
leafto TYPE rsleafto,
leaffrom TYPE rsleaffrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_4,
y_t_hierfile_4 TYPE STANDARD TABLE OF y_s_hierfile_4.
* Hierarchy definition
DATA:
g_s_hiesel TYPE rsndi_s_hiesel,
g_s_hiedir TYPE rsndi_s_hiedir,
g_subrc TYPE sy-subrc,
g_t_hiedirt TYPE TABLE OF rshiedirt,
g_s_hierstruc TYPE rssh_s_htab,
g_t_hierstruc TYPE TABLE OF rssh_s_htab,
g_s_thiernode TYPE rsthiernode,
g_t_thiernode TYPE TABLE OF rsthiernode WITH KEY langu hieid objvers
nodename,
g_s_hierintvl TYPE rssh_s_jtab,
g_t_hierintvl TYPE TABLE OF rssh_s_jtab WITH KEY hieid objvers nodeid,
g_s_message TYPE rsndi_s_message,
g_t_message TYPE TABLE OF rsndi_s_message,
g_s_chavlinfo TYPE rsdm_s_chavlinfo,
g_t_chavlinfo TYPE rsdm_t_chavlinfo.
* File
DATA:
g_fname TYPE string,
g_struct_s TYPE string,
g_struct_t TYPE string,
gr_s_file TYPE REF TO data,
gr_t_file TYPE REF TO data.
FIELD-SYMBOLS:
<g_langu> TYPE ANY,
<g_s_file> TYPE ANY,
<g_t_file> TYPE STANDARD TABLE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_iobjnm.
CALL FUNCTION 'RSD_IOBJ_F4'
EXPORTING
i_show_cha = rs_c_true
i_objvers = rs_c_objvers-active
i_hietabfl = rs_c_true
CHANGING
c_iobjnm = p_iobjnm
EXCEPTIONS
illegal_input = 1.
CHECK sy-subrc = 0.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_hienm.
DATA:
l_s_hiertxt TYPE rrh1_s_hiertxt,
l_t_hiertxt TYPE rrh1_t_hiertxt.
CALL FUNCTION 'RRH1_HIERARCHY_HELP_VALUES_GET'
EXPORTING
i_iobjnm = p_iobjnm
i_dateto = p_dateto
i_hienm = p_hienm
i_version = p_vers
IMPORTING
e_t_hiertxt = l_t_hiertxt
EXCEPTIONS
no_f4_available = 1
dialogue_canceled = 2
OTHERS = 3.
CHECK sy-subrc = 0.
READ TABLE l_t_hiertxt INTO l_s_hiertxt INDEX 1.
CHECK NOT l_s_hiertxt IS INITIAL.
p_hienm = l_s_hiertxt-hienm.
DATA:
l_s_dynpfields TYPE dynpread,
l_t_dynpfields TYPE STANDARD TABLE OF dynpread.
CLEAR: l_t_dynpfields, l_s_dynpfields.
l_s_dynpfields-fieldname = 'P_VERS'.
WRITE l_s_hiertxt-version TO l_s_dynpfields-fieldvalue.
APPEND l_s_dynpfields TO l_t_dynpfields.
l_s_dynpfields-fieldname = 'P_DATETO'.
WRITE l_s_hiertxt-dateto TO l_s_dynpfields-fieldvalue.
APPEND l_s_dynpfields TO l_t_dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = l_t_dynpfields.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
DATA:
l_filename1 TYPE string,
l_filename2 TYPE string,
l_path TYPE string,
l_fullpath TYPE string,
l_action TYPE i.
l_filename1 = p_fname.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
window_title = 'Select Download File'
default_extension = 'txt'
default_file_name = l_filename1
file_filter = 'All Files (*.*)|*.*|Text files (*.txt)|*.txt'
CHANGING
filename = l_filename2
path = l_path
fullpath = l_fullpath
user_action = l_action
EXCEPTIONS
cntl_error = 1
OTHERS = 2. "#EC NOTEXT
CHECK sy-subrc = 0.
CALL METHOD cl_gui_cfw=>flush.
IF l_action = 0.
p_fname = l_fullpath.
ENDIF.
INITIALIZATION.
GET PARAMETER ID 'RSC' FIELD p_iobjnm.
START-OF-SELECTION.
* Check input
CHECK NOT p_fname IS INITIAL.
IF p_langu IS INITIAL.
p_langu = sy-langu.
ENDIF.
IF p_dateto IS INITIAL.
p_dateto = '99991231'.
ENDIF.
* Read hierarchy
CLEAR g_s_hiesel.
g_s_hiesel-objvers = rs_c_objvers-active.
g_s_hiesel-hienm = p_hienm.
g_s_hiesel-version = p_vers.
g_s_hiesel-iobjnm = p_iobjnm.
g_s_hiesel-dateto = p_dateto.
CALL FUNCTION 'RSNDI_SHIE_STRUCTURE_GET'
EXPORTING
i_s_hiesel = g_s_hiesel
i_no_nodenm_table = rs_c_true
IMPORTING
e_s_hiedir = g_s_hiedir
e_subrc = g_subrc
TABLES
e_t_hiedirt = g_t_hiedirt
e_t_hierstruc = g_t_hierstruc
e_t_thiernode = g_t_thiernode
e_t_hierintvl = g_t_hierintvl
e_t_message = g_t_message.
IF g_subrc <> 0.
READ TABLE g_t_message INTO g_s_message INDEX 1.
IF sy-subrc = 0.
MESSAGE ID g_s_message-msgid TYPE 'I' NUMBER g_s_message-msgno
WITH g_s_message-msgv1 g_s_message-msgv2
g_s_message-msgv3 g_s_message-msgv4.
ELSE.
MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
WITH 'Hierarchy read error'.
ENDIF.
EXIT.
ENDIF.
* Defined output structures
IF p_dates IS INITIAL AND p_inter IS INITIAL.
g_struct_s = 'Y_S_HIERFILE_1'.
g_struct_t = 'Y_T_HIERFILE_1'.
ELSEIF p_dates = 'X' AND p_inter IS INITIAL.
g_struct_s = 'Y_S_HIERFILE_2'.
g_struct_t = 'Y_T_HIERFILE_2'.
ELSEIF p_dates IS INITIAL AND p_inter = 'X'.
g_struct_s = 'Y_S_HIERFILE_3'.
g_struct_t = 'Y_T_HIERFILE_3'.
ELSE.
g_struct_s = 'Y_S_HIERFILE_4'.
g_struct_t = 'Y_T_HIERFILE_4'.
ENDIF.
CREATE DATA gr_s_file TYPE (g_struct_s).
ASSIGN gr_s_file->* TO <g_s_file>.
CREATE DATA gr_t_file TYPE (g_struct_t).
ASSIGN gr_t_file->* TO <g_t_file>.
* Nodes
REFRESH <g_t_file>.
LOOP AT g_t_hierstruc INTO g_s_hierstruc.
CLEAR <g_s_file>.
MOVE-CORRESPONDING g_s_hierstruc TO <g_s_file>.
* Texts for nodes
READ TABLE g_t_thiernode INTO g_s_thiernode WITH TABLE KEY
langu = p_langu
hieid = g_s_hierstruc-hieid
objvers = rs_c_objvers-active
nodename = g_s_hierstruc-nodename.
IF sy-subrc = 0.
MOVE-CORRESPONDING g_s_thiernode TO <g_s_file>.
ELSE.
* Texts for characteristic values
REFRESH g_t_chavlinfo.
CLEAR g_s_chavlinfo.
g_s_chavlinfo-c_chavl = g_s_hierstruc-nodename.
APPEND g_s_chavlinfo TO g_t_chavlinfo.
CALL FUNCTION 'RSD_CHAVL_READ_ALL'
EXPORTING
i_iobjnm = g_s_hierstruc-iobjnm
i_langu = p_langu
i_dateto = p_dateto
i_check_value = space
i_sid_in = space
i_hieid = g_s_hiedir-hieid
i_objvers = g_s_hiedir-objvers
CHANGING
c_t_chavlinfo = g_t_chavlinfo
EXCEPTIONS
info_object_not_found = 1
routines_generation_error = 2
check_table_not_existing = 3
text_table_not_existing = 4
OTHERS = 5.
IF sy-subrc = 0.
READ TABLE g_t_chavlinfo INTO g_s_chavlinfo INDEX 1.
IF sy-subrc = 0.
MOVE-CORRESPONDING g_s_chavlinfo-e_chatexts TO <g_s_file>.
ASSIGN COMPONENT 'LANGU' OF STRUCTURE <g_s_file> TO <g_langu>.
IF sy-subrc = 0.
<g_langu> = p_langu.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
* Intervals
IF g_s_hierstruc-intervl = 'X' AND p_inter = 'X'.
READ TABLE g_t_hierintvl INTO g_s_hierintvl WITH TABLE KEY
hieid = g_s_hierstruc-hieid
objvers = rs_c_objvers-active
nodeid = g_s_hierstruc-nodeid.
IF sy-subrc = 0.
MOVE-CORRESPONDING g_s_hierintvl TO <g_s_file>.
ENDIF.
ENDIF.
APPEND <g_s_file> TO <g_t_file>.
ENDLOOP.
* Download output table
g_fname = p_fname.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = g_fname
write_field_separator = space
TABLES
data_tab = <g_t_file>
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc = 0.
MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
WITH 'Hierarchy download successful!'.
ELSE.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Diogo -
I have tried installing one update at a time, several together, and all at once. I have tried yesterday and today.
What can I do to get the updates to download correctly and install?This is what I am seeing when I try to install an update:
"There was an error downloading this update. Please quit and try again later" -
HT1369 new version of itunes will not load getting info that itunes is not downloaded correctly
have had itunes for several yrs attempted to download newest version but getting message that itunes is not downloaded correctly and new version will not download
well nobody bothered to give me a hint on what to do, maybe because the problems with the new version of iTunes are really a lot, there is an enormous amount of people out there that have all sort of different problems including mine so I have decided to return to the previous version which works fine and wait untill the apple people come up with a decent product ....
-
After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.
If you have older versions of excel and word that previously ran under the Rosetta emulator (allows PowerPC code to run on Intel system), they will no longer work with Lion.
You can use the Apple programs Pages and Numbers to access the files. They can be bought and downloaded from the App store. NeoOffice is available at http://www.neooffice.org/neojava/en/index.php which has Lion support. OpenOffice doesn't talk to Lion support, it's at http://www.openoffice.org/ -
I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
1. The C2WTS Windows service and C2WTS SharePoint service are both running.
2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
ABAP Convert Internal Table values to Excel and Upload
Hi Friends,
I have a internal table with multiple columns along with values and i need to convert this into String-->Xstring and upload to system but before that i need to make the alignments in the Excel before uploading ex:Making the text bold,set border so how will i do this?
Regards,
Vinodkumar.HI Vinod,
Using OLE is better option to play with Excel.
You can refer below link for detailed information on how to use OLE to download to excel
Downloading report output to Excel using OLE
Thanks,
Lohit
http://www.****************/Tutorials/ABAP/OLE/Index.htm -
PO download and Upload functionality in SRM 5.0
Dear experts,
Is there really in SRM 5.0 Extended Classic scenario a functionality to download and Upload PO's to Excel?
I have seen some people speaking about it in this forum but it is not documented in any SAP document
Thanks
RDYeap, sure!
You can do this, if you go into the PO, you'll see these buttons.
Check that.
Rgs,
Pedro Marques
Edited by: Mr. Pedro Marques on Jun 30, 2008 5:35 PM -
Downloading and Uploading ABAP programs
I need to move a new GUI program (including all screens, include, subroutines, etc.) that was developed on our SAP 4.5 system to our new, upgraded, ECC 6.0 system.
There is an old ABAP program that we use to use called ZSABAPUPDOWNLOAD, but it no longer seem to work between these two SAP versions.
Because of the version differences between these tow systems, our BASIS group does not want us to use a transport to move this code.
Other than completely recreating this program on the ECC60 system, does anyone know of a program (like the old ZSABAPUPDOWNLOAD) or utility that I could use to transfer this program to the new system?welcome to SDN.
is this the program do u have.
if not check it with this.
REPORT ZUPDOWNPROGRAMS LINE-SIZE 132 LINE-COUNT 62 NO STANDARD PAGE HEADING.
This program up / downloads from / to a local dataset
all the components of an ABAP - i.e TEXTS, the entire CUA
including statuses and menus, DYNPROS and source code.
Program documentation and variants are not handled.
INCLUDED programs are automatically handled both on upload
or download. INCLUDE selection can be excluded or generic
e.g only handle INCLUDES starting with ZIN*
INCLUDES within INCLUDES also handled.
The only restriction is on UPLOAD the INCLUDED programs must come
from the same directory as the main program.
On Download of course the ABAP must exist in the library.
Note for LINUX and BATCH users
This program was originally designed as a one off tool for
getting ABAPS etc from a SAP R2 (IBM MVS mainframe system) into
an R3 test system minimising the need for a large amount of
mainframe sysprogs (anybody remember what they were !!) time
and support to say nothing of access problems from TSO /JES2 /
SAP R2. At that time network connections were patchy and the
transport systems largely incompatable and not very reliable.
This program was originally designed as a one off tool for
Must run on Windows front end ---- If you are running SAP with
LINUX on your work station you will have to change the WS_UPLOAD
and WS_DOWNLOAD functions to reflect the Linux file system. The
contents of the data sets themseleves do not need to be changed
Program can easily be modified to run in batch and store
the data on a UNIX host. Change the WS_UPLOAD and WS_DOWNLOAD
to read from and write to UNIX data sets (OPEN FILE etc).
You will also need to modify the parts of the program that get
the DOS directory and display the Windows file paths.
The actual abap data sets do not need to be changed.
Rel 4.0 names can now be up to 40 bytes long
Dynpros and CUA have changed from rel 3.1
Tabstrips now loaded and unloaded in dynpros
Please note restriction on 4.6 systems for users who
have ABAP names which include '/'s in their names.
Rel 4.6b, 4.6c Abap names can include the '/' in their names
e.g /CUST1/CUST2/ORDER
This causes problems when storing to a local file.
a solution is to change the name to %CUST1%CUST2%ORDER i.e / will
be changed to %. On upload the % should be changed back to /
again. This change still needs to be implemented.
If you don't use the / in the abap name then this is not a problem.
If file to be uploaded is in rel 3 format then names are only 8
bytes long.
program uses 3 datasets per abap
1) abapname.eee source, dynpr logic, texts, CUA stuff
2) abapname.hhh dynpr header
3) abapname.fff dynpro fields.
because of varying lengths and contents 3 data sets are used. The
complexity of combining all these to 1 data set would make the
program far too complex.
NOTE: This version of the program can only be used on
release 4.0 or higher. Once an ABAP has been converted
to rel 4.0 it cannot be converted back to rel 3.0
on a release 3/3.1 system. Release 4 CUA tables
are different. Use release 3 version of this program
for releases 3.0 and 3.1. Available on SAPFANS website.
Note that data to be uploaded must have been previously downloaded
by this program (any version since rel 2.0) - except for Initial
Load -- see end of these comments.
Dynpros and CUA statuses have changed since rel 3.1
This program will handle rel 3.1 format on upload but will
download in rel 4.0 format. To upload 3.1 format specify an 'X'
in the rel3 parameter.
If you have downloaded components in rel 4.0 format and you
want to re-load to a 3.1 system you will have to load
the source via standard upload and re-create dynpros and the CUA
manually.
As names can now be longer than 8 characters you can only
use this program if the SAP front end (SAPGUI) supports
long file names (WIN 95/98 or WIN NT). Windows 3.x will not
work as the underlying DOS system cannot handle long file names.
UPLOAD function and DOS directory.
When an ABAP is selected for UPLOAD then the DOS
directory is read into a table. A file called ABAP.BAT is created,
and down loaded to the 'C' drive and executed.
This file executes a DOS DIR command and pipes the output
into a dataset which is then uploaded into an internal
table on SAP.
Note on running DOS commands from ABAP
The first time this procedure is executed you will see a DOS window
which you will have to close manually. To get round this
use windows explorer to select the file ABAP.BAT and then
right mouse click on the file name. Select the
properties window. From this click the CLOSE on EXIT box. This
will then automatically close the DOS function after it has
executed. (Windows restriction).
The DOS function has not been tested using Windows 2000 so
it might not work. OK on W95,W98,WME and Windows NT (No Thanks)
If INCLUDE programs are wanted on UPLOAD only the specified
directory is searched.
Instead of entering path name manually you can click on
the path parameter. Because of Windows restriction you will
have to select ANY file in the relevant directory.
The path will then be copied on to the selection screen.
To do still : Merge 3 files to one and compress output to .ZIP file
fix 4.5 4.6 problem of abaps containing '/' in the name
possibility to automatically up / download referenced
function modules with selection criteria like INCLUDES
To load the ist time into a system.
Create program with ABAP editor and Upload the .EEE file.
Delete ist line (????SRCE) in the ABAP EDITOR --NOT THE DISK FILE
Delete all the source from the line that starts ????TEXT (towards
the end file) till the end so the last line in your source is ENDFORM.
DO NOT ALTER THE DISK FILE. DO THESE CHANGES IN THE ABAP EDITOR.
Save file and execute
Use following parameters (Note the ist time you won't get proper
text on the selection screen).
Function U
Path full dos path containing source e.g c:\abaps\
NOTE YOU MUST ENTER THE FINAL \ as above.
REPID the program name. e.g ZZJIMHXX
note that on the DISK you will see 3 files
ZZJIMHXX.EEE, ZZJIMHXX.FFF, ZZJIMHXX.HHH
just use the name before the dos qualifier - the
program will do the rest
ignore other parameters
The program will then load itself with all the texts etc.
It should now be ready for use.
Macros
DEFINE DEFINE_TABLE.
DATA: &1 LIKE &2 OCCURS &3 WITH HEADER LINE.
END-OF-DEFINITION.
DEFINE CLS.
REFRESH &1.
CLEAR &1.
END-OF-DEFINITION.
DEFINE INIT.
IF &1 NE SPACE.
SEARCH &1 FOR '. .'.
IF SY-SUBRC = 0.
WRITE '*' TO &1+SY-FDPOS(1).
ENDIF.
TRANSLATE &1 USING '*%'.
ELSE.
MOVE '%' TO &1.
ENDIF.
END-OF-DEFINITION.
end of macros
/ SAP standard tables */
TABLES: D020S, "Dynpro header
D020T, "Dynpro title
D021T, "Screen field keyword texts
TRDIR, "Attribute table
TADIR, "Dev. class etc.
EUDB, "CUA data
TSTC, "transaction data
TITLE, "CUA titles
RSMPTEXTS. "Function texts (rel 4.0)
/ Work tables to hold ABAP source etc, and dynpro */
/ contents. */
DATA: BEGIN OF H. "Header
INCLUDE STRUCTURE D020S.
DATA: END OF H.
DATA: BEGIN OF H1 OCCURS 10, "Header
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D020S.
DATA: END OF H1.
DATA: BEGIN OF H2 OCCURS 0, "Rel 3 dynp. header
CNAME(8) TYPE C,
CNUM(4) TYPE C,
NNAME(8) TYPE C,
NNUM(4) TYPE C,
FILL(51) TYPE C,
CDAT(6) TYPE C,
CTIM(6) TYPE C,
END OF H2.
DATA: BEGIN OF F OCCURS 250. "Dynpro Fields
INCLUDE STRUCTURE D021S.
DATA: END OF F.
DATA: BEGIN OF F1 OCCURS 500, "Dynpro Fields
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D021S.
DATA: END OF F1.
DATA: BEGIN OF OLD_F1 OCCURS 0, "Dynpro Fields (rel 3)
NAME(8) TYPE C,
NUMBER(4) TYPE C.
INCLUDE STRUCTURE D021SE_OLD.
DATA: END OF OLD_F1.
DATA: BEGIN OF F2 OCCURS 0, "Dynpro Fields (rel 3)
TFIL(284) TYPE C,
END OF F2.
DATA: BEGIN OF M OCCURS 3. "Match codes (if any)
INCLUDE STRUCTURE D023S.
DATA: END OF M.
DATA: BEGIN OF E OCCURS 0. "Dynpro Logic
INCLUDE STRUCTURE D022S.
DATA: END OF E.
DATA: BEGIN OF E1 OCCURS 0, "Dynpro Logic
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N.
INCLUDE STRUCTURE D022S.
DATA: END OF E1.
DATA: BEGIN OF T OCCURS 0, "prog name and dynpro nrs
NAME(40) TYPE C, "rel 4
NUMBER(4) TYPE N,
END OF T.
DATA: BEGIN OF R OCCURS 56, "prog name and language
NAME(40) TYPE C, "rel 4
LANGUAGE(1) TYPE C,
END OF R.
DATA: BEGIN OF S OCCURS 3000,
TXT(180) TYPE C, "rel 4 was 132
END OF S.
DATA: BEGIN OF R1 OCCURS 50, "for include programs
NAME(40) TYPE C, "rel 4
INSTANCE(3) TYPE P,
END OF R1.
DATA: BEGIN OF S1 OCCURS 3000,
TXT(180) TYPE C, " rel 4 was 132
END OF S1.
DATA: BEGIN OF U OCCURS 100, "Text elements
TXT(180) TYPE C, " rel 4 was 132
END OF U.
DATA: BEGIN OF DIR. "ABAP Attributes
INCLUDE STRUCTURE TRDIR.
DATA: END OF DIR.
DATA: BEGIN OF DTXT. "Dynpro field keyword texts
INCLUDE STRUCTURE D021T.
DATA: END OF DTXT.
/ This data contains all the components of the */
/ CUA such as menus, statuses, Pfkeys */
/ As from rel 4.5 Tabstrips are automatically copied as well */
/ The rel3 parameter must be set however to load the */
/ correct version of the CUA tables if uploading rel 3 */
/ data to a rel 4 system. */
/ Rel 4.0B can convert 3.1 and earlier CUA's */
/ This could change later however. */
CUA Tables.
Key of CUA tables in EUDB data set. Name is len 40 in rel 4.0
DATA BEGIN OF EU_KEY.
INCLUDE STRUCTURE RSEU1_KEY.
DATA END OF EU_KEY.
Status
DATA BEGIN OF STA OCCURS 0.
INCLUDE STRUCTURE RSMPE_STAT. " rel 4
DATA END OF STA.
Functions
DATA BEGIN OF FUN OCCURS 0.
INCLUDE STRUCTURE RSMPE_FUNT. "rel 4
DATA END OF FUN.
Menus
DATA BEGIN OF MEN OCCURS 0.
INCLUDE STRUCTURE RSMPE_MEN. "rel 4.0
DATA END OF MEN.
Menus (texts)
DATA BEGIN OF MTX OCCURS 0.
INCLUDE STRUCTURE RSMPE_MNLT. "rel 4.0
DATA END OF MTX.
Action Bar
DATA BEGIN OF ACT OCCURS 0.
INCLUDE STRUCTURE RSMPE_ACT. "rel 4.0
DATA END OF ACT.
Push Buttons
DATA BEGIN OF BUT OCCURS 0.
INCLUDE STRUCTURE RSMPE_BUT. "rel 4.0
DATA END OF BUT.
PF-Keys
DATA BEGIN OF PFK OCCURS 0.
INCLUDE STRUCTURE RSMPE_PFK. "rel 4.0
DATA END OF PFK.
Function sets
DATA BEGIN OF SET OCCURS 0.
INCLUDE STRUCTURE RSMPE_STAF. "rel 4.0
DATA END OF SET.
Documentation
DATA BEGIN OF DOC OCCURS 0.
INCLUDE STRUCTURE RSMPE_ATRT. "rel 4.0
DATA END OF DOC.
Title codes with text
DATA: BEGIN OF TIT OCCURS 0.
INCLUDE STRUCTURE RSMPE_TITT. "rel 4.0
DATA: END OF TIT.
DATA BEGIN OF FTX OCCURS 0. "rel 4.0
INCLUDE STRUCTURE RSMPTEXTS.
DATA END OF FTX.
rel 3.1 CUA components.
Status
DATA BEGIN OF OLD_STA OCCURS 0.
INCLUDE STRUCTURE RSEU1_GEN. " rel 3.1
DATA END OF OLD_STA.
Functions
DATA BEGIN OF OLD_FUN OCCURS 0.
INCLUDE STRUCTURE RSEU1_FUN. "rel 3.1
DATA END OF OLD_FUN.
Menus
DATA BEGIN OF OLD_MEN OCCURS 0.
INCLUDE STRUCTURE RSEU1_MEN. "rel 3.1
DATA END OF OLD_MEN.
Menus (texts)
DATA BEGIN OF OLD_MTX OCCURS 0.
INCLUDE STRUCTURE RSEU1_TXM. "rel 3.1
DATA END OF OLD_MTX.
Action Bar
DATA BEGIN OF OLD_ACT OCCURS 0.
INCLUDE STRUCTURE RSEU1_ACT. "rel 3.1
DATA END OF OLD_ACT.
Push Buttons
DATA BEGIN OF OLD_BUT OCCURS 0.
INCLUDE STRUCTURE RSEU1_BUT. "rel 3.1
DATA END OF OLD_BUT.
PF-Keys
DATA BEGIN OF OLD_PFK OCCURS 0.
INCLUDE STRUCTURE RSEU1_PFK. "rel 3.1
DATA END OF OLD_PFK.
Function sets
DATA BEGIN OF OLD_SET OCCURS 0.
INCLUDE STRUCTURE RSEU1_SET. "rel 3.1
DATA END OF OLD_SET.
Documentation
DATA BEGIN OF OLD_DOC OCCURS 0.
INCLUDE STRUCTURE RSEU1_ETM. "rel 3.1
DATA END OF OLD_DOC.
Title codes with text
DATA: BEGIN OF OLD_TIT OCCURS 0.
INCLUDE STRUCTURE TITLE. "rel 3.1
DATA: END OF OLD_TIT.
dynamic function text
DATA BEGIN OF FDN OCCURS 1.
INCLUDE STRUCTURE RSEU1_FDYN. "not req for rel 4.
DATA END OF FDN.
Icons
DATA BEGIN OF FIN OCCURS 1.
INCLUDE STRUCTURE RSEU1_ICON. "not req for rel 4
DATA END OF FIN.
dynamic menu texts
DATA BEGIN OF MDN OCCURS 1.
INCLUDE STRUCTURE RSEU1_MDYN. "not req for rel 4.
DATA END OF MDN.
Symbol list
DATA BEGIN OF SYM OCCURS 0.
INCLUDE STRUCTURE RSEU1_SYMB.
DATA END OF SYM.
Status Short text
DATA BEGIN OF STX OCCURS 0.
INCLUDE STRUCTURE RSEU1_CTX.
DATA END OF STX.
Attributes for function key settings (menu bars) Rel 3.0
DATA BEGIN OF ATT OCCURS 0.
INCLUDE STRUCTURE RSEU1_HAT.
DATA END OF ATT.
Include-Menus
DATA BEGIN OF INC OCCURS 3.
INCLUDE STRUCTURE RSEU1_INC.
DATA END OF INC.
Last used numbers
DATA BEGIN OF LAST.
INCLUDE STRUCTURE RSEU1_LST.
DATA END OF LAST.
data for call transaction (SE41 to re-generate the CUA)
DATA: BEGIN OF T_BDC_TAB OCCURS 0.
INCLUDE STRUCTURE BDCDATA. "BDC data
DATA: END OF T_BDC_TAB.
DATA: BEGIN OF T_MESSTAB OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
DATA: END OF T_MESSTAB.
/ Program data */
DATA: NUMBER(4) TYPE N,
OLDNUM(4) TYPE N,
FILESIZE TYPE I,
NR_OF_BYTES TYPE I,
I(3) TYPE P,
IX(3) TYPE P,
J(3) TYPE P,
L(3) TYPE P,
CUA-FLAG(1) TYPE C,
CUA_RETURN(10) TYPE C,
DYNPRO_MESSAGE(160) TYPE C,
DYNPRO_LINE TYPE P,
DYNPRO_WORD(30) TYPE C,
NUM(3) TYPE N,
DYNNAME(44) TYPE C,
FN1(128) TYPE C,
FN2(128) TYPE C,
FN3(128) TYPE C,
W_ITERATE(1) TYPE C,
MAIN(1) TYPE C,
FUNC(1) TYPE C,
OLDNAME(40) TYPE C,
OLD-FUNC(8) TYPE C,
NEW-FUNC(8) TYPE C,
FOUND(1) TYPE C,
LANGUAGE LIKE SY-LANGU,
FIRST-TIME(1) TYPE C VALUE 'Y',
OK-CODE(5) TYPE C,
NAME(40) TYPE C, "rel 4
TXLINE(70) TYPE C,
LINE(132) TYPE C.
DATA:
UL_FILE(128) TYPE C,
DL_FILE(128) TYPE C,
DOSLINE(72) TYPE C.
DATA: BEGIN OF DOSDIR OCCURS 0,
TEXT(72),
END OF DOSDIR.
DATA: BEGIN OF I_PROG OCCURS 0,
NAME(40),
END OF I_PROG.
DATA: BEGIN OF I_PROGT OCCURS 0,
NAME(40),
END OF I_PROGT.
DATA: BEGIN OF I_INCLUDE OCCURS 0,
NAME(40),
HANDLED(1) TYPE C,
END OF I_INCLUDE.
DATA: BEGIN OF I_INCL OCCURS 0,
NAME(40),
END OF I_INCL.
DATA: BUFFER(1024).
DATA: WINSYS(3).
DATA: GLOBAL_FILEMASK_MASK(20), GLOBAL_FILEMASK_TEXT(20).
DATA: GLOBAL_FILEMASK_ALL(80).
DATA: T_FILENAME(128),
TMP_FILENAME(128),
T_MODE(1),
FIELDLN TYPE I.
DEFINE_TABLE I_DYNPFIELDS DYNPREAD 0. "dynpro fields to be updated
DATA: I_FLDS LIKE HELP_VALUE OCCURS 0 WITH HEADER LINE.
FIELD-SYMBOLS: <F>.
/ Parameters */
SELECTION-SCREEN BEGIN OF BLOCK A1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS REPID FOR TRDIR-NAME OBLIGATORY .
PARAMETERS:
FUNCTION(1) TYPE C OBLIGATORY, "Function
DSNAME(40) TYPE C, "Data set name
INCLUDES(1) TYPE C DEFAULT 'N', "Resolve Includes
IMASK(40) TYPE C, "Include Mask
CLASS LIKE TRDIR-CLAS,
AUTHOR LIKE TRDIR-CNAM, "Author
APPL LIKE TRDIR-APPL,
PATH(88) TYPE C DEFAULT 'A:\',
REL3(1) TYPE C.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-005.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-002.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(70) TEXT-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK A1.
/ Check users workstation is running WINDOWS, */
/ WINDOWS 95, or WINDOWS NT. OS/2 no good for */
/ this application. */
CALL FUNCTION 'WS_QUERY'
EXPORTING
QUERY = 'WS'
IMPORTING
RETURN = WINSYS.
IF WINSYS(2) NE 'WN'. "Win 3.X no good either
WRITE: / 'Windows NT or Windows 95/98 is required'.
EXIT.
ENDIF.
/ Get names of programs to be handled. */
/ Name can be a single value, many values or ranges */
/ as per standard SELECT-OPTIONS on selection screen */
/ On Download read TRDIR and store program names in a table */
/ as per selection options. */
/ On upload read the specified directory for all files of */
/ type .EEE from specified directory */
/ compare file names with selection criteria */
MOVE FUNCTION TO FUNC.
MOVE 'Y' TO MAIN.
CASE FUNC.
WHEN 'U'. "Upload required
PERFORM READ_DOS_DIRECTORY.
PERFORM GET_RANGE_UL. "Get list of progs to process
WHEN 'D'. "Download required
PERFORM GET_RANGE_DL. "Get list of progs to process
WHEN OTHERS.
WRITE: / 'Function not performed due to user request'.
EXIT.
ENDCASE.
SORT I_PROG.
DELETE ADJACENT DUPLICATES FROM I_PROG.
For download INCLUDE handling can be resolved via function
module call.
All Includes within Includes are also resolved by the function
module call.
Note that this method does not work if program itself is of type
I (it's an include)
In this case we can still search the source.
IF FUNC = 'D'.
IF INCLUDES = 'Y'.
PERFORM GET_INCLUDES_DL.
PERFORM PROCESS_INCLUDES_DL.
ENDIF.
ENDIF.
Program list from selection criteria i.e excluding INCLUDES found
LOOP AT I_PROG.
MOVE I_PROG-NAME TO R1-NAME.
APPEND R1.
DESCRIBE TABLE R1 LINES I.
WHILE I NE 0.
PERFORM EXECUTE-FUNCTION.
ENDWHILE.
REFRESH R1.
ENDLOOP.
We need to check now for INCLUDES on DOWNLOAD when the INCLUDE
program itself is of type I. In this case the function call
will not return the INCLUDES. For example we could be
downloading ZTESTTOP (an Include itself) which as an include
ZTEST01.
The process fortunately is the same as the UPLOAD function
except of course we need to read the library instead of the
DOS directory
process INCLUDE modules for Upload
On upload the procedure is more complex as Includes within
Includes can only be resolved by scanning the code and
searching if the program exists in the directory.
To get all INCLUDES within INCLUDES entries in table I_INCL
that do not exist in I_INCLUDE are copied to table I_INCLUDE
after each entire pass of table i_INCLUDE and table is then
re-looped through. Programs in table I_INCLUDE that have already
been processed have a "Y" indicator set in I_INCLUDE-AVAIL.
if func = 'U'.
IF INCLUDES = 'Y'.
DESCRIBE TABLE I_INCL LINES I.
IF I > 0.
W_ITERATE = 'Y'.
ELSE.
W_ITERATE = ' '.
ENDIF.
WHILE W_ITERATE = 'Y'.
PERFORM PROCESS_INCLUDES_UL.
PERFORM LOOP_THROUGH.
DESCRIBE TABLE I_INCL LINES I.
IF I > 0.
W_ITERATE = 'Y'.
ELSE.
W_ITERATE = ' '.
ENDIF.
ENDWHILE.
endif.
ENDIF.
DESCRIBE TABLE I_INCLUDE LINES I.
IF I > 0.
SKIP 1.
WRITE: / ' Included Programs found'.
SKIP 1.
LOOP AT I_INCLUDE.
WRITE I_INCLUDE-NAME TO LINE(40).
CONDENSE LINE.
WRITE: / LINE(80).
ENDLOOP.
ENDIF.
/ Table R contains ABAP names to up / download. */
/ Loop through table R and perform up / download */
/ for each program. */
/ Table R1 contains INCLUDE names found (if any) */
/ As each */
FORM EXECUTE-FUNCTION.
LOOP AT R1.
MOVE-CORRESPONDING R1 TO R.
APPEND R.
ENDLOOP.
REFRESH R1.
LOOP AT R.
REFRESH : T, E1, H1, F1, S, U.
PERFORM PROCESS.
MOVE 'N' TO MAIN.
ENDLOOP.
REFRESH R.
DESCRIBE TABLE R1 LINES I.
ENDFORM.
/ Build file names for UP/DOWNLOAD */
/ 3 files are generated per ABAP. */
/ 1) ABAP Path\PROGNAME.EEE (ABAP, Attr,Texts) */
/ Logic Path\PROGNAME.EEE (Dynpro Source Logic) */
/ CUA Path\PROGNAME.EEE (CUA components - keys etc) */
/ 2) Header Path\PROGNAME.HHH (Dynpro Header) */
/ 3) Fields Path\PROGNAME.FFF (Dynpro Field definitions )*/
/ ( If alternate file name specified -DSNAME- this will */
/ be used instead. This is only valid for the main program. */
/ INCLUDED programs will have file names as specified */
/ above). */
/ By using this scheme it saves the user from having to */
/ be prompted for 3 file names. */
/ If you want multiple copies / versions on disk either */
/ rename the old versions or specify a different directory in */
/ the path parameter. */
FORM PROCESS.
MOVE PATH TO FN1.
CASE MAIN.
WHEN 'Y'.
IF DSNAME NE SPACE.
WRITE DSNAME TO FN1+66. "rel 4
ELSE.
WRITE R-NAME TO FN1+66. "rel 4
ENDIF.
WHEN OTHERS.
WRITE R-NAME TO FN1+66. "rel 4
ENDCASE.
MOVE FN1 TO FN2.
MOVE FN1 TO FN3.
WRITE '.HHH' TO FN1+124(4). "rel 4
WRITE '.FFF' TO FN2+124(4). "rel 4
WRITE '.EEE' TO FN3+124(4). "rel 4
CONDENSE FN1 NO-GAPS.
CONDENSE FN2 NO-GAPS.
CONDENSE FN3 NO-GAPS.
NAME = R-NAME.
CASE FUNC.
WHEN 'D'.
PERFORM DOWNLOAD_OBJECTS.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been unloaded' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
DESCRIBE TABLE T LINES I.
IF I = 0.
WRITE: / 'No Dynpros were found for unload function'.
ELSE.
WRITE: / 'The following Dynpros have been unloaded : '.
PERFORM LOOP_THROUGH_T.
ENDIF.
WHEN 'U'.
PERFORM UPLOAD_OBJECTS.
DESCRIBE TABLE T LINES I.
CASE I.
WHEN 0.
WRITE: / 'No Dynpros were found for restore function'.
WHEN OTHERS.
WRITE: / 'The following Dynpros have been restored : '.
PERFORM LOOP_THROUGH_T.
ENDCASE.
IF MAIN EQ 'Y'.
CASE OLDNAME.
WHEN SPACE.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
WHEN OTHERS.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored - original name :'
TO LINE+55.
WRITE OLDNAME TO LINE+92.
CONDENSE LINE.
WRITE: / LINE.
ENDCASE.
ELSE.
CLEAR LINE.
WRITE : 'ABAP : ' TO LINE.
WRITE R-NAME TO LINE+8.
WRITE 'has been restored' TO LINE+55.
CONDENSE LINE.
WRITE: / LINE.
ENDIF.
ENDCASE.
ENDFORM.
/ print progname + dynpro nrs that have been processed. */
FORM LOOP_THROUGH_T.
LOOP AT T.
CLEAR LINE.
WRITE R-NAME TO LINE.
WRITE T-NUMBER TO LINE+50.
CONDENSE LINE.
WRITE: / LINE.
ENDLOOP.
ENDFORM.
/ Download Objects */
FORM DOWNLOAD_OBJECTS.
PERFORM UNLOAD_ABAP. "ABAP source, texts, attr
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
IF TRDIR-SUBC = 'I'.
CASE INCLUDES. "Included file wanted
WHEN 'Y'.
PERFORM SCAN4-INCLUDES.
ENDCASE.
ENDIF.
PERFORM UNLOAD_CUA. "CUA stuff
PERFORM DOWNLOAD_DATA. "Download EEE file to PC
PERFORM BUILD_T. "Build table of all dynpros in ABAP
DESCRIBE TABLE T LINES I.
CASE I.
WHEN 0. "if no dynpros exist then cannot download any
PERFORM DOWNLOAD_DATA. "Download EEE file to PC
WHEN OTHERS.
PERFORM UNLOAD_DYNPROS. "Get Raw dynpros from SAP
PERFORM UNLOAD_DYNPRO_COMPONENTS."Convert to table
PERFORM DOWNLOAD_DATA. "Download ABAP etc. to PC
PERFORM DOWNLOAD_BIN_H1. "Download dynpro header
PERFORM DOWNLOAD_BIN_F1. "Download dynpro fields
ENDCASE.
ENDFORM.
/ Split ABAP up into its component parts */
/ A) Program source (72) */
/ B) Texts (132) */
/ C) Attributes (117) */
/ D) CUA stuff (Various) */
FORM UNLOAD_ABAP.
/ Get ABAP language. Only required on download. */
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
MOVE TRDIR-RLOAD TO R-LANGUAGE.
READ REPORT R-NAME INTO S. "Get source into table S
MOVE '????SRCE' TO S-TXT.
INSERT S INDEX 1.
/ Text elements, Numbered texts, headings, selection texts */
/ Read text elements with logon language. If they don't */
/ exist read with the value taken from TRDIR. */
READ TEXTPOOL R-NAME INTO U LANGUAGE SY-LANGU.
IF SY-SUBRC NE 0.
READ TEXTPOOL R-NAME INTO U LANGUAGE R-LANGUAGE.
ENDIF.
DESCRIBE TABLE U LINES I.
CASE I.
WHEN 0.
WHEN OTHERS.
MOVE '????TEXT' TO S-TXT.
APPEND S.
LOOP AT U.
MOVE U-TXT TO S-TXT.
APPEND S.
DELETE U.
ENDLOOP.
ENDCASE.
/ Retrieve Attributes from TRDIR and add to table S */
/ Change language to logged on language */
MOVE '????ATTR' TO S-TXT.
APPEND S.
SELECT SINGLE * FROM TRDIR
WHERE NAME EQ R-NAME.
MOVE SY-LANGU TO TRDIR-RLOAD.
MOVE-CORRESPONDING TRDIR TO DIR.
MOVE DIR TO S-TXT.
APPEND S.
ENDFORM.
/ retrieve CUA stuff and append to table S. */
FORM UNLOAD_CUA.
MOVE R-NAME TO EU_KEY-NAME. "Program name for CUA
MOVE 'D' TO EU_KEY-SPRSL. "CUA seems to want D as lang
MOVE R-LANGUAGE TO EU_KEY-SPRSL. "Language "rel 2.2
IMPORT STA FUN MEN MTX ACT BUT PFK SET LAST INC STX DOC "rel 2.2
IMPORT STA STX FUN MEN MTX ACT BUT PFK SET LAST INC DOC "rel 3.0
ATT FDN MDN SYM FIN "rel 3.0
FROM DATABASE EUDB(CU) ID EU_KEY.
IF SY-SUBRC NE 0. "No statuses
EXIT.
ENDIF.
read titles in logged on language. If not present use
language from TRDIR.
CASE REL3.
WHEN SPACE. "(rel 4)
SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
AND SPRSL = SY-LANGU.
MOVE-CORRESPONDING RSMPTEXTS TO FTX.
APPEND FTX.
ENDSELECT.
IF SY-SUBRC NE 0.
SELECT * FROM RSMPTEXTS WHERE PROGNAME EQ R-NAME
AND SPRSL = R-LANGUAGE.
MOVE-CORRESPONDING RSMPTEXTS TO FTX.
APPEND FTX.
ENDSELECT.
ENDIF.
DESCRIBE TABLE FTX LINES I.
IF I > 0.
MOVE '????FTXT' TO S-TXT.
APPEND S.
LOOP AT FTX.
MOVE FTX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
WHEN OTHERS.
SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
AND DDLANGUAGE EQ SY-LANGU.
MOVE-CORRESPONDING TITLE TO TIT.
APPEND TIT.
ENDSELECT.
IF SY-SUBRC NE 0.
SELECT * FROM TITLE WHERE PROGNAME EQ R-NAME
AND DDLANGUAGE EQ R-LANGUAGE.
MOVE-CORRESPONDING TITLE TO TIT.
APPEND TIT.
ENDSELECT.
ENDIF.
ENDCASE.
DESCRIBE TABLE STA LINES I.
IF I > 0.
MOVE '????STAT' TO S-TXT.
APPEND S.
LOOP AT STA.
MOVE STA TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FUN LINES I.
IF I > 0.
MOVE '????FUNC' TO S-TXT.
APPEND S.
LOOP AT FUN.
MOVE FUN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MEN LINES I.
IF I > 0.
MOVE '????MEN1' TO S-TXT.
APPEND S.
LOOP AT MEN.
MOVE MEN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MTX LINES I.
IF I > 0.
MOVE '????MTX1' TO S-TXT.
APPEND S.
LOOP AT MTX.
MOVE MTX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE ACT LINES I.
IF I > 0.
MOVE '????ACTN' TO S-TXT.
APPEND S.
LOOP AT ACT.
MOVE ACT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE BUT LINES I.
IF I > 0.
MOVE '????BUTN' TO S-TXT.
APPEND S.
LOOP AT BUT.
MOVE BUT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE PFK LINES I.
IF I > 0.
MOVE '????PFKY' TO S-TXT.
APPEND S.
LOOP AT PFK.
MOVE PFK TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE SET LINES I.
IF I > 0.
MOVE '????SETS' TO S-TXT.
APPEND S.
LOOP AT SET.
MOVE SET TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
IF LAST NE SPACE.
MOVE '????LIST' TO S-TXT.
APPEND S.
MOVE LAST TO S-TXT.
APPEND S.
ENDIF.
DESCRIBE TABLE INC LINES I.
IF I > 0.
MOVE '????INCL' TO S-TXT.
APPEND S.
LOOP AT INC.
MOVE INC TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE STX LINES I.
IF I > 0.
MOVE '????STXT' TO S-TXT.
APPEND S.
LOOP AT STX.
MOVE STX TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE DOC LINES I.
IF I > 0.
MOVE '????DOCN' TO S-TXT.
APPEND S.
LOOP AT DOC.
MOVE DOC TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE TIT LINES I.
IF I > 0.
MOVE '????TITL' TO S-TXT.
APPEND S.
LOOP AT TIT.
MOVE TIT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
Next 5 tables are rel 3.0 specific (ATT, FDN, MDN, SYM, FIN)
DESCRIBE TABLE ATT LINES I.
IF I > 0.
MOVE '????VATT' TO S-TXT.
APPEND S.
LOOP AT ATT.
MOVE ATT TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FDN LINES I.
IF I > 0.
MOVE '????VFDN' TO S-TXT.
APPEND S.
LOOP AT FDN.
MOVE FDN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE MDN LINES I.
IF I > 0.
MOVE '????VMDN' TO S-TXT.
APPEND S.
LOOP AT MDN.
MOVE MDN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE SYM LINES I.
IF I > 0.
MOVE '????VSYM' TO S-TXT.
APPEND S.
LOOP AT SYM.
MOVE SYM TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF.
DESCRIBE TABLE FIN LINES I.
IF I > 0.
MOVE '????VFIN' TO S-TXT.
APPEND S.
LOOP AT FIN.
MOVE FIN TO S-TXT.
APPEND S.
ENDLOOP.
ENDIF. -
Excel Download of a Web SAP BW Report asks userid and password.please help
Dear BW folks,
Issue: When I run a specific SAP BW Report from Web and download the same into excel & csv.
When I open the excel file downloaded, it asks me user name and password to enter. csv file downloaded doesn't ask.
The report has 0cust_sales hierarchy and SBU hierarchy.
Is there any thing to do with these hierarchies that the excel download is asking user name and password?
Please help me out!!!!! This report needs to be downloaded into excel sent to my manager.....
Regards
PavanHi Pavan
It is possible,please refer the below link
Report execution without prompting user id
Providing un-secured access to a web report.
Also, for the time being, you can run the query and save a workbook and sent across
These will resolve the issue
Thanks
Pavan Agarwal -
How to upload data from excel to SAP and options to be used
How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shuklaHi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S
Maybe you are looking for
-
Recently I upgraded from snow leopard to Mavericks . Since the upgrade my Adobe Creative Suite 4 will not launch any programs. I downloaded adobe license recovery it says " this program is no longer supported " . At this point I am ready to go back t
-
Hi everyone! I'm trying to install the trial version of SAP CE 7.1 on a windows XP Pro Machine. I successfully installed it on my laptop so I don't know whats happening. In steps.xml: <i><taskexecution start="20071017115418" end="20071017115431" desc
-
Golden Gate configuration with 12c Database
Hi, I have a requirement to configure the golden gate with oracle database 12c with container database. Versions: Golden Gate - 12.1.2.1.0 Oracle Database - 12.1.0.2 Here we need to configure with container database and two pluggable database. Kindly
-
What is the differences between the older version of Oracle Financials and the 11 i
What is the differences between the older version of Oracle Financials and 11i?
-
Hi gurús, I settled some documents for a supplier trough transacction MRKO. Now I need to reverse or delet this settled? What should be the transaction that I need to use? Regards Enzo