Excel Error: Microsoft Visual Basic Application: "Compile error in hidden module: Module 11

i am enable to creat XML file in excel when ever try to creal the XML file it shows Microsoft Visual Basic : "Compile error in hidden module MODULE 11
can any one help me to solve this issue

Hi,
For the error message, this problem may occur when the following conditions are true:
The Microsoft Office Startup folder or the Microsoft Excel Startup folder contains either or both of the following Adobe Acrobat PDFMaker add-in template files:
Pdfmaker.dot
Pdfmaker.xla
Norton AntiVirus software is installed.
No full installed
Please try the following methods:
Method 1: Download the latest version of the add-in for Adobe Acrobat 5.0
Method 2: Move the files
Method 3: Visit the Symantec Web site for Norton Antivirus information and product updates
Method 4: Repair from the CD disk.
For more detail information, please refer to the following link:
http://support.microsoft.com/kb/307410/en-us
Regards,
George Zhao
TechNet Community Support

Similar Messages

Excel Error: Microsoft Visual Basic Application: "Compile error in hidden module: Importedfunctions

When i open excel 2010 i am getting the above mentioned error please help

Firstly, You can check startup directory: c:\Users\UserName\AppData\Roaming\Microsoft\Excel\XLSTART\
And remove files from it.
Also try to run excel in safe mode: press ‘Win+R’ -> Enter Excel.exe \Safe .
If this issue goes away is safe mode, it should caused by some third party add-ins. Try to disable it.
In addition, you can refer to the following KB:
http://support.microsoft.com/kb/307410

Microsoft Forms and Microsoft Visual Basic while opening the Excel file

Hello,
I have issues with 2010 64 bit Office Pro Plus Excel. Whenever I open an Excel file (97-2003 worksheet) which has macros then I get below 2 errors in sequence.
Please note that all macro settings are enabled and below are my system configs.
Win 7 Ultimate 64 bit,
MS Office Pro Plus 2010 64 bit with SP2.
Googled all and tried but in vein and also note that I dont have any .exd files under ../forms to delete. Please help.
Please note that for others with same system config/office versions and same 97-2003 worksheet it works so issues is only in my system.
First Error
Microsoft Forms
Could not load an object because it is not available on this machine.
Second Error
Microsoft Visual Basic for Applications
Compile error in hidden module: MainUtilities2.
This error commonly occurs when code is incompatible with the version, platform, or architecture of this application. Click "Help" for information on how to correct this error.
Thanks.

Your macro's will not run in a Office 64 environment only in a 32bit environment. The 64bit environment has a whole different setup and macro's created in an earlier 32 bit environment will stop working.
So if you want to use them in a 64 Office environment you have to rewrite the macro's.
have a look here:
http://msdn.microsoft.com/en-us/library/gg264421.aspx
Maurice

Compile error in hidden module: modRun. Excel 2010 x64

When closing any Excel spreadsheet, this error occurs
Microsoft Visual Basic for Applications
Compile error in hidden module: modRun.
This error commonly occurs when code is incompatible with the version, platform, or architecture of this application. Click "Help" for information on how to correct this error.
any helps here please?

Hi,
Try to start office in safe mode [hold ctrl key while startup].This issue may be caused by some add-ins. Please check this article:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q307410
Wind Zhang
TechNet Community Support

Error message in excel 2003 : compile error in hidden module could be caused by Adobe Acroate add in

The error message in excel 2003 : "compile error in hidden module AutoExecNew" could be caused by Adobe Acroate add ins, thats waht microsoft told me.I use windows xp service pack3.I have got reader newest version and photoshop 6.0. With this and also with an older reader version I got the error message when opening excel. what can I do?
Best regards Ray

If you have Adobe Reader, you (probably) don't have Adobe Acrobat, a
commercial ($$) product. 5.0 is a very old release.
But you can check if the files are there anyway from long ago. See
http://support.microsoft.com/kb/307410
Aandi Inston

Compile error in hidden module: Essbaselogon. This error commonly occurs when code is incompatible with the version, Platform, or architecture of this application

Hi,
I am getting below wrror while accesing the Ecel:
compile error in hidden module: Essbaselogon. This error commonly occurs when code is incompatible with the version, Platform, or architecture of this application

IIRC essbase is a financial reporting add-in (Hyperion, or something similar?).
This message is telling you that the add-in is not compatible with your current software. You should check with the vendor who provided the essbase add-in. Tell them what version of windows and Excel (and maybe Hyperion) you are using, and get a compatible
version from them...
If you do not need or run essbase/hyperion/etc then you should just remove/disable the add-in. If it doesn't show in your add-in menu, then you may have to do a repair installation or re-install Excel

Microsoft Visual Basic Compiler - MAC and also IPHONE

I work for a company that manufactures traffic calming products. Our software development for the sign has been in Microsoft Visual Basic which is then compiled for the windows environment.
I need to locate a compiler that will hopefully compile it for use on the MAC and also possibly the IPHONE. Many of our customers are looking for a MAC version of the code. It is a simple program that uses bluetooth to communicate to the bluetooth modem in the sign, sending and receiving data and settings.
Thank any of you that can help me with this project. Rich Garrett [email protected] 678-925-3555 www.radarsign.com

xnav is right. RealBASIC is a good one to check out. I have a small amount of experience with it, as well as Visual Basic and Liberty BASIC. So, I don't really care for BASIC or any of its variants, but I think that if you to program BASIC on the Mac then RealBASIC is a good way to go. It's similar to Visual Basic, and provides a simple way to build basic (and maybe not-so-basic) apps on the Mac. I'm not sure if it supports iPhone development or not, but it's definitely worth looking into if you need to program BASIC on Mac, and it's the only BASIC-based development environment on the Mac that I know of (there could be more that I don't know of though).

Microsoft XL Compile error in hidden module:

When i start and stop MS XL ,it give me this error message i chicked help and got this
Compile error in hidden module: <module name>
A protected module can't be displayed. This error has the following cause and solution:
There is a compilation error in the code of the specified module, but it can't be displayed because the project is protected. Unprotect the project, and then run the code again to view the error.
How i can Unprotect the project, and then run the code again to view the error.

Is this an Oracle Database General question?Does it count if Oracle is installed on the machine? What about if an installation CD is near the keyboard?
:-)

ADI 7.2.11 - Error "Compile error in hidden module Utils.1"

Hi,
I've got the following Error message , with ADI 7.2.11 , with Excel 2003 and Excel 2007 , while Uploading Journal :
Microsoft Visual Basic Error : "Compile error in hidden module Utils.1"
Note : The following has been checked :
- In Excel 2003 : "Trust access to Visual Basic Project" has been Checked.
- In Excel 2007 : "Trust access to the VBA project object model" has been Checked.

Hi Octavio,
Thank's for your Help.
I've checked Note 796512.1 : the following security Updates are not installed : KB936507, KB958690, KB960225.

Compile error in hidden module: AZWizardModul.

Receiving the following error message when opening Office Word 2010:
=========================================================
Microsoft Visual Basic for Applications
Compile error in hidden module: AZWizardModul.
This error commonly occurs when code is incompatible with the
version, platform, or architecture of this application. Click ‘Help; for
information on how to correct this error.
=========================================================
Microsfot Office Word 10 has never been a problem.
Recently purchased a new HP i7 laptop, have had problems since..
Have attempted several online solutions but nothing has worked.

Hello StanleyBogacz. I understand that you're encountering this error when launching Word 2010. Is this correct?
The module it is referring to is an Avery Label Wizard template. Do you have Avery Label Wizard? It is not compatible with Office 2010. Here is a Microsoft Answers thread on the topic.
In any case, it would be a good idea to remove this template and attempt to use Word again. Follow these directions as this in a hidden folder within Windows.
Click Start, type "C:\users\\appdata\roaming\microsoft\templates" and press Enter.
Locate the AZWizardModul.
Right click this module and delete it.
Close any Word windows and re-open it.
Verify that the error is no longer there.
The easiest way to find your computer name is to click Start. Then right-click Computer and this will open the System Information window. In the middle area is a section labeled "Computer Name," it will be listed here.
I hope you find this information helpful; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Compile error in hidden module cBEXcommon

Hi
whenever i try to open up the Bex analyzer from Start-> all Programs -> Business explorer -> Bex Analyzer
it opens up Microsoft excel with error -
Microsoft VB for Applications
Compile error in hidden module cBEXcommon
This error commonly occurs when code is incompatible with verrsion, platform or architecture of this application.
Even after this if i try to click Open query it gives error
Cannot run the macro 'sapbex.xla!repoNewQuery'
i tried copying SAPBEX.XLA from another machine where it works but this still doesnot work..
my machine has windows 7, another machine has windows xp
are there any new patches or addins for windows 7
thanks very much for help

Hello
Can you please follow the steps as below:
1.Control panel > Add or remove programs > uninstall Sapgui
2.Control panel > Add or remove programs > uninstall Sap bex explorer
3.Delete the following folders in the PC
C: \program files/SAP/Frontend
C:\Program Files\SAP\Business Explorer
C:\Program Files\Common Files\SAP Shared
C:\Documents and Settings\All Users\Start Menu\Programs\SAP Front End
C:\Documents and Settings\All Users\Start Menu\Programs\BusinessExplorer
4.Delete the files in the recycle bin and reboot the PC. (this step is important)
5 After the reboot, first install the GUI 710/720 with the latest patch level
6 Install BEx 7.0 and BEx 3.5 with the latest patches for each.
Regards,
Michael

How do i use directX in microsoft visual basic studio 2010 express ?

i am writing code to graph stock market prices using microsoft visual basic studio express
i want fast response (i do machine language) using directX
this is my problem
i have never used directX, and i have never used directX in visual basic studio
i followed a tutorial that went like this
Reference: Microsoft.DirectX
             Microsoft.DirectX.Direct3D
             Microsoft.DirectX.Direct3DX
    Imports: Microsoft.DirectX
             Microsoft.DirectX.Direct3D
             Microsoft.DirectX.Direct3DX
    Declare: Private D3Ddev As Device = Nothing
             Private D3Dpp As PresentParameters = Nothing
             Private DP As DisplayMode = Nothing
i found the reference dll's at C:\Windows\Microsoft.NET\DirectX for Managed Code\1.0.2902.0
when i imported microsoft.directX.direct3DX i got error #1
namespace or type specified in the imports 'microsoft.directX.direct3DX' doesn't contain any public member or cannot be found...
the same error occurs wether i use direct3DX \1.0.2911.0 or \1.0.2902.0
when i built and ran, i got error #2
microsoft visual basic 2010 express is waiting for an operation to complete ...
it hangs and i have to soft reset ctrl-alt-del
error #3
when i reference
Microsoft.DirectX
Microsoft.DirectX.Direct3D and
Microsoft.DirectX.Direct3DX
from C:\Windows\Microsoft.NET\DirectX for Managed Code\1.0.2902.0,
all my declares work:
        D3Dpp = New PresentParameters()                             'Initialize
some stuff for the Presentation parameters
        D3Dpp.BackBufferFormat = DP.Format
        D3Dpp.BackBufferWidth = DP.Width
        D3Dpp.BackBufferHeight = DP.Height
        D3Dpp.SwapEffect = SwapEffect.Discard                       'There's flip, copy, and discard. Flip and Discard
are used most often.
        D3Dpp.PresentationInterval = PresentInterval.Immediate      'Present the scene immediately
but when i start debugging (f5), i get this error message:
mixed mode assembly is built against version 'v1.1.4322' of the runtime and cannot be loaded in the 4.0 runtime without additional configuration information
i dont fully understand the visual studio process, but i think 'mixed mode' means run and debug. two seperate app's
i know this is a long question, but the forums don't answer it properly
i want it answered concisly. i am running windows 7 basic, and this is my question
can somebody give me a dozen lines of directX code that will work with my system, so that i can at least draw a line using directX 2D and 3D ?
thanks everybody :)

Hi,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Since your issue is related to DirectX, I suggest you consult on DirectX forum:
http://xboxforums.create.msdn.com/forums/ for better response.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Compile error in hidden module: xliff Translator

Hi All,
I'm new here and finished installing the 10.1.3.3 version. Everything is working fine except the Excel Analyzer.
When I try to open any report with it opens a new excel file with a blank tab named "_remove_me_please" and a window with the message "Compile error in hidden module: Xliff Translator".
Please advise.
Thanks
Valente

The reason this is happening is BI Publisher is pretty much junk. We have been using the same version of the product as you since February 2008 and have experienced endless problems. It is completely embarrassing the IT department. The Excel functionality is the most buggy, but we also have very strong feelings about the Query Builder in the web interface (no numeric aggregation functions!).
For half the users who try to use the Excel Add-in, the 'BI Publisher' menu never even shows up! We all use the most updated version of MS Office 2003 Pro, and a fully updated .NET Framework 2. Right now, I do have the menu in my Excel, but I can't even get the Analyzer to show my report. I get the same result as you, with the empty sheets, one of which is called 'remove_me_please'. I'm sure the report works because I can view the XML data in the web interface using 'Data' output format.
There is another error related to this issue, which might shed some light on the situation for the Oracle developers. If you save the fargled file to disk instead of opening it directly, then open Excel and login to BI, then open the file, you get this error:
'Object variable or With block variable not set'
This may actually be a problem in .NET, as mentioned in the Microsoft knowledge-base article: http://support.microsoft.com/kb/316478
In any case, BI Publisher suffers from a terrible lack of diagnostic capability, which wouldn't be an issue if it wasn't so buggy. Have you tried diagnosing problems in your XSLT in your RTF templates? What a freakin' nightmare that is. If you change more than a few form fields and then get an error, you can forget about finding where the error is. That means you must rerun the report after every minute change. Talk about slow development! As much as I like XSLT and XPATH, we completely abandonded showing people how to design reports that way.
I haven't used the old RDF way of reporting, but I think Oracle should have stuck with that. BI Publisher is what happens when a Microsoft wanna-be like Oracle tries to integrate with a Microsoft product like Office. With all the bugs and patches in Microsoft products, there's no way Oracle could keep up with all the different versions and caveats, to keep their products functioning in that environment.
Sincerely,
Multiverse

Compile Error in Hidden Module:Autoopen

Hello everybody,
I'm having a very annoying problem:
We have an Excel spreadsheet used by several people on the company. After some update made by Microsoft around December past, whis spreadsheet just won't work anymore and Excel shows the message:
"Compile Error in Hidden Module:Autoopen"
I tried some solutions found here and there, but no remedy for the problem. The only solution is uninstall the updates from end of Deceber 13 until now.
Can anyone help me, please ?
Thank you very much !

Hi,
According to your description, your issue seems related to the Microsoft Office Security Updates for December 2014, I recommend you try the method and check if it is help:
Delete the EXD files, these extender files will be under the user's profile and may also be in other locations, such as the following:
%appdata%\microsoft\forms
%temp%\excel8.0
%temp%\word8.0
%temp%\PPT11.0
%temp%\vbe
More reference:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2014/12/13/forms-controls-stop-working-after-december-2014-updates-.aspx
Microsoft understands the position our customers are in and we are working to find a solution besides a FixIt that can be deployed to remedy the issue. If we have any update, we'll post in the forum. Thanks for your understanding.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

BI Desktop - compile error in hidden module

Hi,
I realise this is a common and old problem, but I'm having trouble setting up BI publisher desktop on my laptop with:
64 bit
Windows 7
Office 2007
I started with this
https://blogs.oracle.com/xmlpublisher/entry/template_builder_woes
and I've tried these suggestions
compile error in hidden module: module starter (Urgent)
even to the point of removing .NET 4 and re-applying v2
I have re-installed BI desktop quite number of times now, and I've given up trying. Any tips?
Scott

Hi,
I too was facing the same problem while clicking on the log in button on the Microsoft Word.
I just executed the below command and now I am able to login to Bi Publisher through my Microsoft Word.
Run command prompt as Admin
For 64-bit operating systems, type the following:
Regsvr32 "C:\Windows\SysWOW64\MSCOMCTL.OCX"
For 32-bit operating systems, type the following:
Regsvr32 "C:\Windows\System32\MSCOMCTL.OCX"
Thanks,
Ila

Excel Error: Microsoft Visual Basic Application: "Compile error in hidden module: Module 11

Similar Messages

Maybe you are looking for