Excel extractor produces error "Error 8 when compiling the upload program"

I am trying to test a new Excel extractor I've created but when I do so I get the following error:
RSAR233
Error 8 when compiling the upload program: row 446, message: A newer version of data type /BIC/B0000788000 was
I've tried reactivating transfer structures and transfer rules but with no success. When I activate the transfer structures I can see in the status bar briefly a message refering "Activating Structure /BIC/B0000788000". I am assuming it's the technical name of the structure which supports the extraction.
Any ideas?
Thanks for the help.

OK, I can see your point. The Communication structure fields have data types, CHAR, CURR and DATS (those are the data types for the info-objects I am trying to load).
But if I try to assign the same data types to the objects of the transfer structure which match the flat file I get errors like "Invalid data type (DATS) for source systems of type Ext. System.". What I understand this means is that I cannot use data types other than CHAR in the flat file structure so how can I assign data from a CHAR flat file to a DATS destination object? Do I need some kind of conversion? How? Do I really need a routine in the transfer rules?

Similar Messages

Error 8 when compiling the upload program: row 436

Hi all,
pls let me know how to solve this error
Error 8 when compiling the upload program: row 436, message: A newer version of data type /BIC/B0000582000 was
Thanks
Prashant

Hello SAP gurus.
I know it's a very long time the question was asked, but who cares if it can someday help somebody?
So i just faced the same issue, the solution was sample, i relaunch RSA1 and the problem was solved.
Hope i would be helpful
Salah

Error 8 when compiling the upload program: row

Error 8 when compiling the upload program: row
248, message: Data type /BIC/CCAWSAI_CID_TEXT was
found in a new
kindly help me out pls

Hi Raghu,
Error 8 Implies
The last words should be read as "was found in a newer version".
The system says that the active version of your Infosource is older then another version.
I'd recommend to delete Infosource - Source system assignment (with PSA tables etc.).
Then save (activate) the Infosource (communication structure). Then assign source system, create infopackage and load data again.
else..
Goto se38 and Run the program RS_TRANSTRU_ACTIVATE_ALL and relogin..
Plz look the link.
[Error when compiling the upload program (Message no. RSAR233) ]
Hope this helps...
Regards,
NR
Assign points if helpful...

Error 8 when compiling the upload program

When loading data to the Infocube it gives the following error
"Error 8 when compiling the upload
227, message: Data type /BIC/CCFBZ
found in a ne "
It doesnot go any further from thr infopackage also..

Error when compiling the upload program (Message no. RSAR233)

Error when compiling the upload program (Message no. RSAR233)

Hello,
I tried to upload data from a flatfile but I did modified the Comm.Structure, Trans.Structure and Transfer Rules.
After activating the all changes, I check data from InfoPackage by previewing it. Unfortunately, I got the follow messages from the popup window:
Error 8 when compiling the upload program: row
227, message: Data type /BIC/CCABTWJI_STK01 was
found in a newer
I got this kind of problems many times. I solved it by create a new infosource and everything again. I don't think it's good idea to do this way.
Any better solution would be sincerely appreciated?
-WJ-

Another solution:
go out the transaction RSA1 ans return to the transaction RSA1 again.
This would help for me without restarting anything.
Thank you very much for all suggestion.
-WJ-

Errors occured when compile the bpel process

Errors occurred when compile the bpel process using bpel designer for Eclipse:
(com.oracle.bpel.designer_0.9.13)
using PM: bpel_jboss_101200
More error infomation following:
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
[bpelc] retun true;
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.collaxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.collaxa.cube.engine.types.bpel.CXPartnerLink.
[bpelc] __pl.setPartneLinkBinding(getProcessDescriptor().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
[bpelc] ^
[bpelc] E:\OraBpelDEclipse3.2\workspace\AboutTest\temp\bpelc762.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
[bpelc] __setOutgoingLinks(__sc, __ctx);
[bpelc] ^
[bpelc] 4 errors
BUILD FAILED
E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml:28: ORABPEL-01005
Error in java files auto-generated when compiling ,why?
Thanks!

when compiled again without any change, the same errors like above are not occurs
more info.
Buildfile: E:\OraBpelDEclipse3.2\workspace\AboutTest\build.xml
main:
BUILD SUCCESSFUL
Total time: 9 seconds
BUT, some errors occurs in BPEL PM server and in Console the process is not available
more Info: Because I using Chinese version,some chinese Info occurs in the error infomation ,so i have translated some character into English.
process "AboutTest" (version "1.0") compiled sucessfully
15:49:15,718 INFO [STDOUT] <2007-05-11 15:49:15,718> <INFO> <default.collaxa.cu
be.engine.deployment> process "AboutTest" (version "1.0") loaded sucessfully.
16:25:25,265 INFO [STDOUT] <2007-05-11 16:25:25,250> <INFO> <default.collaxa.cu
be.compiler> validating "E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0.jar\
AboutTest.bpel" ...
16:25:35,015 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: Invalid expression statement.
16:25:35,015 INFO [STDOUT] retun true;
16:25:35,015 INFO [STDOUT] ^
16:25:35,031 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:835: ';' expected.
16:25:35,031 INFO [STDOUT] retun true;
16:25:35,031 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:208: Method setPartneLinkBinding(com.col
laxa.cube.rm.suitcase.PartnerLinkBindingDescriptor) not found in class com.colla
xa.cube.engine.types.bpel.CXPartnerLink.
16:25:35,859 INFO [STDOUT] __pl.setPartneLinkBinding(getProcessDescript
or().getPartnerLinkBindings().getPartnerLinkBinding(__pl.getName()));
16:25:35,859 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] E:\OraBPELPM\domains\default\tmp\.bpel_AboutTest_1.0
.jar\BPEL-INF\src\bpel\p0\BPEL_BIN.java:584: Undefined variable: __ctx
16:25:35,859 INFO [STDOUT] __setOutgoingLinks(__sc, __ctx);
16:25:35,859 INFO [STDOUT] ^
16:25:35,859 INFO [STDOUT] 4 errors
16:25:36,343 INFO [STDOUT] <2007-05-11 16:25:36,312> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessFactory::generateProcessClass>
process "AboutTest" (version "1.0") compiled failed.
16:25:36,359 INFO [STDOUT] <2007-05-11 16:25:36,359> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessLoader::create> can not compile the class .
can not compile the bpel class generated from "AboutTest".
16:25:36,375 INFO [STDOUT] <2007-05-11 16:25:36,375> <ERROR> <default.collaxa.c
ube.engine.deployment> process "AboutTest" (version "1.0") loaded failed!!
16:25:37,281 INFO [STDOUT] <2007-05-11 16:25:37,265> <ERROR> <default.collaxa.c
ube> <BaseCubeSessionBean::logError>
if you have installed patched in server, please check whether the proriety "bpelcClasspath" contained the patch class.
16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.bind(CubeProcessHolder.java:1257)
16:25:37,343 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.loadAndBind(CubeProcessHolder.java:870)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sHolder.loadArchive(CubeProcessHolder.java:812)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.engine.CubeEngine.loadProces
sArchive(CubeEngine.java:985)
16:25:37,421 INFO [STDOUT] at com.collaxa.cube.ejb.impl.BPELDomainManagerBe
an.loadProcessArchive(BPELDomainManagerBean.java:390)
16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke0(
Native Method)
16:25:37,421 INFO [STDOUT] at sun.reflect.NativeMethodAccessorImpl.invoke(N
ativeMethodAccessorImpl.java:39)
16:25:37,421 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
16:25:37,421 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
24)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer$Conta
inerInterceptor.invoke(StatelessSessionContainer.java:683)
16:25:37,421 INFO [STDOUT] at org.jboss.resource.connectionmanager.CachedCo
nnectionInterceptor.invoke(CachedConnectionInterceptor.java:186)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.StatelessSessionInstanc
eInterceptor.invoke(StatelessSessionInstanceInterceptor.java:72)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.AbstractTxInterceptor.i
nvokeNext(AbstractTxInterceptor.java:84)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.runWit
hTransactions(TxInterceptorCMT.java:282)
16:25:37,421 INFO [STDOUT] at org.jboss.ejb.plugins.TxInterceptorCMT.invoke
(TxInterceptorCMT.java:148)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.SecurityInterceptor.inv
oke(SecurityInterceptor.java:111)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.LogInterceptor.invoke(L
ogInterceptor.java:191)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.plugins.ProxyFactoryFinderInter
ceptor.invoke(ProxyFactoryFinderInterceptor.java:122)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.StatelessSessionContainer.inter
nalInvoke(StatelessSessionContainer.java:331)
16:25:37,437 INFO [STDOUT] at org.jboss.ejb.Container.invoke(Container.java
:709)
16:25:37,437 INFO [STDOUT] at sun.reflect.GeneratedMethodAccessor81.invoke(
Unknown Source)
16:25:37,437 INFO [STDOUT] at sun.reflect.DelegatingMethodAccessorImpl.invo
ke(DelegatingMethodAccessorImpl.java:25)
16:25:37,437 INFO [STDOUT] at java.lang.reflect.Method.invoke(Method.java:3
24)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.ReflectedDispatcher.dispa
tch(ReflectedDispatcher.java:60)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
ation.java:62)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.dispatch(Invoc
ation.java:54)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.Invocation.invoke(Invocat
ion.java:82)
16:25:37,437 INFO [STDOUT] at org.jboss.mx.server.AbstractMBeanInvoker.invo
ke(AbstractMBeanInvoker.java:197)
16:25:37,453 INFO [STDOUT] at org.jboss.mx.server.MBeanServerImpl.invoke(MB
eanServerImpl.java:473)
16:25:37,453 INFO [STDOUT] at org.jboss.invocation.local.LocalInvoker.invok
e(LocalInvoker.java:97)
16:25:37,453 INFO [STDOUT] at org.jboss.invocation.InvokerInterceptor.invok
e(InvokerInterceptor.java:90)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.TransactionInterceptor.invoke
(TransactionInterceptor.java:46)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.SecurityInterceptor.invoke(Se
curityInterceptor.java:55)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ejb.StatelessSessionIntercept
or.invoke(StatelessSessionInterceptor.java:100)
16:25:37,453 INFO [STDOUT] at org.jboss.proxy.ClientContainer.invoke(Client
Container.java:85)
16:25:37,453 INFO [STDOUT] at $Proxy146.loadProcessArchive(Unknown Source)
16:25:37,453 INFO [STDOUT] at com.collaxa.cube.engine.deployment.CubeProces
sMonitorWork.run(CubeProcessMonitorWork.java:129)
16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.jca.work.WorkerJob.go(W
orkerJob.java:51)
16:25:37,453 INFO [STDOUT] at oracle.tip.adapter.fw.common.ThreadPool.run(T
hreadPool.java:267)
16:25:37,453 INFO [STDOUT] at java.lang.Thread.run(Thread.java:534)
16:25:37,453 INFO [STDOUT] <2007-05-11 16:25:37,453> <ERROR> <default.collaxa.c
ube.engine.deployment> <CubeProcessMonitorWork::run> Error while loading process
archive E:\OraBPELPM\domains\default\deploy\bpel_AboutTest_1.0.jar
why?
thanks

Error 8 when starting the extraction program

HI all
I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
Regards
alex

Alex,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Abdul

Error 8 when starting the extraction program (BI7.x)

I am receiving the following message when loading from the ODS to the data targets:
Error 8 when starting the extraction program
Message no. R3019
Diagnosis
Error 8 occurred when starting the data extraction program.
System response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or create a problem message of your own.
I have searched the forums and OSS, and can't find anything that matches my situation exactly. I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system. I restored the BIP client and all transfer structures were reactivated. Now when I try to load, I get this error 8. Has anyone experienced this issue?
Thanks,
Pam

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Error 4 when starting the extraction program

Hello Gurus,
Yesteday I got one error "Error occured in the source system"that "Error 4 when starting the extraction program" and "error in the source system" has given, it has affected all the loads,please any one give me solution for thia it is urjent.
Please find the error message bello.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Service API .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is
Thanks,
Muddu Reddy.

Hi sekhar,
You can try this. you right click on the datasource and click on display in source system it takes you to the R/3 system enter the user id and password so u can now see the datasource in the R/3 so now click on back f3 so now u vl be in BI now replicate the datasource and try to load the data. I think now it should work fine.
Tell me if you still face some problem.
Thanks
Ram

MFC compile error LNK2001 when compiler the MFC_example file

When I compiler the MFC_example(GPIB example) file in vc++ 6.0 .Found some error :
error LNK2001: unresolved external symbol _ibonl@8
error LNK2001: unresolved external symbol _ibcntl
error LNK2001: unresolved external symbol _ibrd@12
Can you tell me what's problem?

Hi,
You need to include the gpib-32.obj in your project settings. The object file is where the API functions are actually implemented.
Go to Project >> Settings. Then select the Link tab to include the name of the object file on the "Object/library module" field. You might have to add the object file path on the "Additional Library path" field in the same Link tab under the Input category. Refer to the Visual C++ environment documentation.
Here is a previous discussion on this.
DiegoF
National Instruments.

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Bi data upload error:status 51 - error: Error 8 when starting the extr prog

while data load form the source system into thw bw i am getting error in error monitor as under,
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
                                IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
                               Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
   r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
                 IDoc sent to SAP system or external program"
   bw side: "IDoc: 0000000000007089 Status: Application document posted,
                 IDoc was successfully transferred to the monitor updating"
what to do at r/3 side?
Best regards,
dushyant.

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixon

try these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you...

Errors when compiling the web service (SAP Web Service Design Tool)

After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

Hello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]

Errors were found when compiling the workflow

My company has consolodated many SharePoint sites into one with many subsites to save money. I ported my existing libraries from theold site to the new site (Same version of SP). The workflows did not go with the libraries, as expected. I re-created each
workflow, and every time have gotten the same error message: "Errors were found when compiling the workflow. The workflow files were saved but cannot run."
When I click Advanced I see some variation of the following:
(-1, -1) Compilation failed. Could not find file 'C:\Users\TEMP.*domain*\AppData\Local\Temp\ **and then a different .dll file every time'
I have not seen any other examples of this online. For some, creating a new task and history list for the workflow allowed it to compile, but not always.

Hi,
According to your post, my understanding is that Errors are found when compiling the workflow.
I recommend that you can check whether the file exists under the path 'C:\Users\TEMP.*domain*\AppData\Local\Temp\”.
If it exists, you can create a silmple workflow to check whether it works.
If it does work, you can add executionTimeout property in web.config file to increase the timeout interval(Make a copy of the web.config file before editing anything).
For more information, please refer to:
Manjuke's Blog: Fixed: SharePoint Designer Error - Unexpected error on server associating the workflow
SharePoint Designer 2010 Errors were found when compiling the workflow. The workflow files were saved but cannot be run. Unexpected error on server associating the workflow.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Excel extractor produces error "Error 8 when compiling the upload program"

Similar Messages

Maybe you are looking for