Excel Filter Shows Non Existent Missing Members How to Remove them?

I have a tabular model cube in SSAS 2012 I am adding a filter to my excel pivot table and it shows a blank member that does not exist. If I use a slicer I can "hide empty members" but when I use a filter there is no such option. Is
there a way to remove this selection for an empty member?

Hi Jimlaf,
In your scenario, you connect to a SQL Server Analysis Server Tabular model cube in Excel. It shows a blank member that does not exist in the filter, however the empty member were hidden automatically in the slicer. Now what you want is removing the empty
members in filter, right?
I have tested it on my local environment, I got the same results with yours. And based on my research, it seems that this is the default setting, there is no such an option to remove the empty members in filter.
If I have anything misunderstood, please point it out. Thank you for your understanding.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Similar Messages

SCCM 2012 SP1 - Evil Folders in Reporting Services - What Are They and How to Remove Them

Hello All,
There are a lot of sub-folders in the http://CentralSiteSCCM/ReportServer. They are like:
<dir> Config_Mgr_CEN
<dir> Config_Mgr_CEN.OLD.0
<dir> Config_Mgr_CEN.OLD.1
<dir> Config_Mgr_CEN.OLD.10
<dir> Config_Mgr_CEN.OLD.100
<dir> Config_Mgr_CEN.OLD.1000
Only <dir> Config_Mgr_CEN is properly populated with the correct set of the default folders.
Would you be so kind to advise on:
What are they?
How to remove them?
What to do in order for them not to appear any more?
Thank you very much in advance!

Hi Mike,
I ran into an issue when I did the SP1 upgrade where a majority of our reports were duplicated. I created a script to delete these duplicate reports and I've adjusted it to work for your situation. You can find the original thread here, if you're interested:
http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
You'll need to know your SCCM site code and the server name to run this script.
# SCCM2012SP1-RemoveDuplicateSSRSFolders.ps1
# This script will connect to SSRS on a specified server and delete all folders that end with .OLD.*
# Used for SSRS cleanup after SCCM 2012 SP1 installation
# Script must be run from an account that has access to modify the SSRS instance
# 3/22/2013 - Mike Laughlin
# Resources used in writing this script:
# Starting point: http://stackoverflow.com/questions/9178685/change-datasource-of-ssrs-report-with-powershell
# API Documentation: http://msdn.microsoft.com/en-us/library/ms165967%28v=sql.90%29.aspx
# Previous script: http://social.technet.microsoft.com/Forums/en-US/configmanagergeneral/thread/dc9aa3b4-cea9-4a07-87ca-2795a2dbc04e
# Define variables
$SiteCode = ""
$serverName = ""
# Set the value of $noConfirm to $True only if you don't want to manually confirm folder deletion. Use with caution.
$noConfirm = $False
# Safeguard
If ( $SiteCode -eq "" -or $serverName -eq "" ) { Write-Host "Enter the required information for the SiteCode and serverName variables before running this script." -ForegroundColor Red -BackgroundColor Black ; Exit }
# Connect to SSRS
$ssrs = New-WebServiceProxy -uri http://$serverName/ReportServer/ReportService2005.asmx?WSDL -UseDefaultCredential
# Get a listing of all folders in SSRS
$reportFolders = $ssrs.ListChildren("/", $True)
# Find all folders containing .OLD.*
$foldersToDelete = $reportFolders | Where { $_.Name -like "ConfigMgr_" + $SiteCode + ".OLD.*"}
# Quit if no folders are found
If ( $foldersToDelete.Count -eq 0 ) { Write-Host "No folders with .OLD.* found. Quitting." ; Exit }
# Show a listing of the folders that will be deleted
Write-Host "The following folders will be deleted from SSRS on" $serverName":`n"
$foldersToDelete.Name
Write-Host "`nTotal number of folders to delete:" $foldersToDelete.Count "`n"
# Get confirmation before deleting if $noConfirm has not been changed
If ( $noConfirm -eq $False )
$userConfirmation = Read-Host "Delete these folders from" $serverName"? Enter Y or N"
If ( $userConfirmation.ToUpper() -ne "Y" ) { Write-Host "Quitting, folders have not been deleted." ; Exit }
# Delete the folders
$deletedFolderCount = 0
Write-Host "Beginning to delete folders now. Please wait."
ForEach ( $folder in $foldersToDelete ) { $ssrs.DeleteItem($folder.Path) ; $deletedFolderCount++ }
Write-Host "Folders have been deleted. Total number of deleted folders:" $deletedFolderCount
Standard disclaimer: While this script worked just fine for me in my environment, I make no guarantees that it will work anywhere else. I've attempted to make this script as user friendly and generic as possible, but it may require slight tweaking to work properly.

Dead links - not another "how to remove them" thread

I know this question has been answered a few times but the question is not a "how to remove them" or "what do they mean" question.
I would like to know how this happens other than changing the file directory or information outside of iTunes. Here is a couple things I could think of that I would like some input on.
1. All of my songs that have a ! by them were downloaded off of the internet for free (no shareware, just an actual web site).
2. These songs were already in mp3 format prior to importing them.
3. I made a copy of my iTunes folder on another harddrive, but still run iTunes from the orginal drive.
4. Since I have 2 copies of iTunes song files, I deleted the original source of these files in My Music, which were in WMA format.
Again, I did not change the file information to any of these songs. Any help would be great! Thanks!

Thanks for the information.
This is where you created the '!' links:
"I have 2 harddrive in my PC. "C" is my main drive and "D" is my backup drive. iTunes stores everything on my C drive. I copied this iTunes folder (including songs, playlist info, etc) and pasted it on my D drive."
iTunes operates as a database of information for your music files. The actual music files are stored on your PC, not within iTunes. iTunes keeps absolute references of the music file location and other information in its database file. This allows iTunes to use music files from any location on the PC: different directories/folders on the main HD, another internal drive, an external drive, or a network drive (or any combination of the above). Each song reference has a specific and hardcoded path so iTunes can find and play (or sync) it. Move the file, change the path, re-map the drive it is on, and iTunes will lose the file (giving you the '!' of a ‘Broken Link’). Lose, move or corrupt the ‘iTunes Music.itl’ file and your complete Library will ‘vanish’.
Changing (or designating) the 'iTunes Music folder' location in the Preferences does not instruct iTunes where to look for existing songs it currently knows about. It directs iTunes where to store any new songs it Imports, or 'Adds' and copies to its Library organization (if that attribute is selected). This is an important distinction.
You can do one of two things:
1) Move all the files back to the C: drive where the iTunes program expect them to be, and then move them to the D: drive using iTunes
OR
2) Delete all the broken song references within iTunes and Rebuild the Library
The first method will preserve your Library information: Playlists, Ratings, Last Played, Play Count. The second method will lose these attributes.
Song attributes stored directly in each music file are as follows: Artist, Album, Song Title, Year, Comments, Compilation tag, Lyrics, Genre , Grouping, Composer, BPM, Album Artwork, Bit Rate & Kind (Both not tags - inherent to the file itself). You will not lose any of these attributes regardless of the method used to recover your Library.
Either method should be relatively easy to accomplish as long as you can maintain some control over the file moving (it's not rocket science). If your C: drive cannot accept the temporary move of your files, you may be stuck with option 2. If you do not have many important playlists, or care about ratings, playcounts, etc., then option 2 is a bit easier.
Post back with more questions...or with your 'choice'. We'll go from there.

I have 0,3€ credits. How can remove them so that I can change to the app store of another country?

I have 0,3€ credits. How can remove them so that I can change to the app store of another country? I need to change to the Chinese app store as the apps I am looking for can be only found there. Thanks for all answer in advance!

Click here and ask the iTunes Store staff to zero your account balance. Note that if you're not in China, you won't be able to use the Chinese App Store.
(125951)

ICal prints times in front of event entries, I don't want these times entered. How to remove them?

iCal prints times in front of event entries, I don't want these times entered. How to remove them?

Go to your Flagged Photos Smrt Album on the Left.
Command - a will select All
Then File -> New -> Album
Regards
TD

HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone. Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the

The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000). Now, I need to remove some, as they are taking up too much space. I cannot figure out how to remove them from the phone. I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone. I've read as many articles as I can find, but still cannot manage this. Thanks for any help.

Open itunes, connect iphone, select what you want, sync

Whenever I use google chrome or safari Macshop ads come up does anyone know how to remove them?!

I'm not sure how to remove them and they are very annoying! Any help would be greatly appreciated!

1. Use free AdwareMedic by clicking “Download ” from here
     http://www.adwaremedic.com/index.php
     Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
     Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
    “Quit AdwareMedic”.
2. Safari > Preferences > Extensions
    Turn those off and relaunch Safari.
    Turn those on one by one and test.
               or
    Remove the adware manually by following the “HowTo” from Apple.
    “Remove Genieo, also known as InstallMac”
    http://support.apple.com/en-us/HT203987

RHX5 showing non-existent style

We imported two Word docs, using the same style sheet both in
the doc and in RH. All the styles are fine in both docs, except for
one style. Doc A shows a good style "InstructionIndent", but in Doc
B, the RH style field shows that RH has seen the same style as
"INSTRUCTION". The css has been applied to all chapters. The style
looks fine in the original Word doc.
1) Does the all caps font of INSTRUCTIONS mean something
special in RH, such as a non-existent style?
2) Do I need to change all of these styles manually, or is
there an easier way?
Thank you,
Linda

> When I transport the same Directory config from XID
> to XIT due to an additional change I have made, I get
> the error about the business system:
>
> Business system XE_DEV_3RD_IMS_001 is not assigned a
> business system in group XE_ESAP_TST_001
>
Can you let me know if XE_ESAP_TST_001 is the Quality Objects Group?
If yes, then can you check if you have created the transport target for the Business System XE_DEV_3RD_IMS_001 ?
If you do not want this Business System to be a part of the New transport, i.e, you do not need this Business System in your transport, then my gut feel here is that one of your Config Scenarios still contines to use this Business System or,
You are trying to import a Old version of your TPZ file.
Regards
Bhavesh

Websheet objects non-existent or invalid -- how to correct?

OS: RHEL 5.4
DB: 11gR2
APEX: 4.1
After upgrade of APEX to 4.1, websheet objects non-existent or invalid -- hence, can not create Websheet app. Any clues on how to correct and/or what may be wrong? Sample database applications imported and working fine.
Cheers!

Got this figured out...
Just had to install the sample Websheets from the Application.
Cheers!

OEM discovery - shows non-existing DBs

Hello All:
When i try to discover a node/host , OEM discovers non-existing databases as partially configured. These databases have been deleted a while ago. How do we clear them? oratab doesn't have entries for these databases.
Thanks
S~

There arent any refs in listner.ora of those deleted dbs. I changed the tns_admin from $ORACLE_HOME/network/admin to $ORACLE_BASE/admin/SID/tns_admin as i am using a wallet. This may have probably introduced the confusion.
Thanks
S~

My thumbnails are not showing up next to the icons in finder. Also the back arrow and forward arrow as well as the list options don't show up. Any suggestions how to get them back?

In my Finder window, the picture icons that usually show up next to the items are not there. i.e. in my sidebar, the little pictures that are usually by the Application, Desktop, Documents, etc items. Also, the back and forward arrows, list items and tasks don't show as well. Any ideas on how to get them back?

Hello AgentScaber,
You'll likely need to reinstall Mountain Lion.
OS X Mountain Lion: Reinstall OS X
http://support.apple.com/kb/PH10763
Cheers,
Allen

Urgent -open purchase orders existed in asset how to remove from the asset

Hi,
Some assets I am going to delete if the open purchase orders existed how to remove the open purchase orders from the asset what is the t/code to view the open purchase ordes.
Can any body give the details please.
Regards,
Prabhakar.

Use ME2N and give the required paramets in field Selection Parameters. Some of the available choices are
Open invoices
Open target value
Open issue quantity
Issue quantity reversible
Open goods receipt
PO AA link is established through Account Assignment Category A mentioned in PO. Select the PO with above and change the PO through ME22N

I have an Ipad and several Ipods. We have deleted some songs from our devices but they still show up gray shaded. They don't play but I'd like to know how you remove them from your devices completly?

I have several Ipods and an Ipad. We have all deleted music from our devices and the problem we are having is the song itself is gone which is what we wanted but the song title is still on the devices. It's grey and it won't play but I want to know how to remove the deleted songs completely off my devices.

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Items on ipod that do not show up on Device list, want to remove them

A pod cast and a video I downloaded from itunes and copied to my ipod are on my ipod but when I connect the ipod they do not show up on the lists of items on the device. I can see and play them on the ipod, but cannot find them on the list of items on the ipod when I connect to itunes...
I want to remove them and can't
baffled....

They should be able to help you. You must have the iPod set to manually managed. Podcasts generally work best when set to auto-sync.
To find these files it is easiest to create a smart playlist on the iPod itself with the right rules to find the files while it is set to manually manage. To delete files through a smart playlist you will need to hold the "Alt" key on the keyboard then hit the Delete key. Atl/Delete is for Mac but may be a combination of Delete and Shift, Control, or Windows key on Windows PCs.

If the virus entered in iphone how to remove them

if the virus entered in iphone how to remove them

virus's are not cross platform and there are no known IOS virus's

Excel Filter Shows Non Existent Missing Members How to Remove them?

Similar Messages

Maybe you are looking for