Excel integration with Entry and Approval for SSM not working

Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
Error opening Excel Automation server can't create object. This can be caused by:
1. - The application is not installed on your machine
2. - The browser security does not support ActiveX scripts.
3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
However, I've done the following:
-          Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
-          The browser security is definitely set to accept all active X scripts
-          I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
-          Iu2019ve flushed cache and restarted listener several times.
What am I missing? I donu2019t see it in any of the docs.
Thanks!

Robb,
Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
Regards,
Bob

Similar Messages

The message function on my Ipad just quit working. I was using it while in Mexico and it just quit. I have come home and synced my Ipad with Itunes and function still does not work. How do I get this function to work again?

The message function on my Ipad just quit working. I was using it while in Mexico and it just quit. I have come home and synced my Ipad with Itunes and function still does not work. How do I get this function to work again?

When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

Amd suitchable graphics with hd6670 (and intell 3000 ) will not work on windows 10

hi there i have amd suitchable graphics with intell , and the amd will not work on windows 10 pro x64 the actual model of the amd is HD 6670 but is using the drivers of the hd6470. in any case it will not work in windows 10 pro x64 after a clean install. please any help thanks

Have you disabled the firewall in you security system? Windows firewall rarely gets in the way, but security systems' do.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Oracle instant Client and unixODBC for Linux not work

Hi experts,
I have two Redhat EL 5. On the first Rehat(xxx.xxx.xxx.121 --> called Redhat1) I have installed Oracle 10g database server. On the second Redhat(xxx.xxx.xxx.123 --> called Redhat2) I want to connect to Oracle database server on xxx.xxx.xxx.121 via ODBC. But it does not work. Pls help me!
I have done steps as following:
Login to Redhat2 as root and type commands:
1)Install Instant Client + sqlplus
# rpm -ivh oracle-instantclient-basic-10.2.0.4-1.i386.rpm
# rpm -ivh oracle-instantclient-sqlplus-10.2.0.4-1.i386.rpm
2)Setting environment variable
# LD_LIBRARY_PATH=/usr/lib/oracle/10.2.0.4/client/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
# SQLPATH=/usr/lib/oracle/10.2.0.4/client/lib:${SQLPATH}; export SQLPATH
3)Testing connection to Redhat1(Oracle DB server) using sqlplus
# sqlplus abc/[email protected]:1521/lab2
Connected.
5)Begin to install unixODBC
# rpm -ivh oracle-instantclient-odbc-10.2.0.4-1.i386.rpm
# rpm -ivh unixODBC-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-devel-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-kde-2.2.11-7.1.i386.rpm
6)After installation above packages I check for existing of odbc.ini and odbcinst.ini in /etc --> ok
# ls /etc | grep odbc
odbc.ini
odbcinst.ini
7) Tar unixODBC-2.2.14-linux-x86-32.tar.gz and copy file to /usr/local/bin, /usr/local/include, /usr/local/lib
# tar -xzf unixODBC-2.2.14-linux-x86-32.tar.gz
# ls /usr/local/bin/
dltest isql iusql odbc_config odbcinst
# ls /usr/local/include
autotest.h odbcinstext.h odbcinst.h sqlext.h sql.h sqltypes.h sqlucode.h unixodbc_conf.h uodbc_extras.h uodbc_stats.h
# ls /usr/local/lib
libboundparam.la libgtrtst.la libodbccr.la libodbcinst.la libodbc.la
libboundparam.so libgtrtst.so libodbccr.so libodbcinst.so libodbc.so
libboundparam.so.1 libgtrtst.so.1 libodbccr.so.1 libodbcinst.so.1 libodbc.so.1
libboundparam.so.1.0.0 libgtrtst.so.1.0.0 libodbccr.so.1.0.0 libodbcinst.so.1.0.0 libodbc.so.1.0.0
# NLS_LANG=AMERICAN_AMERICA.UTF8; export NLS_LANG
# TNS_ADMIN=/root; export TNS_ADMIN
# ODBCINI=/etc/odbc.ini; export ODBCINI
7)Retest sqlplus to Redhad1(Oracle database server) with local tnsname
# sqlplus vonphoto/vonphoto@lab2
SQL*Plus: Release 10.2.0.4.0 - Production on Sat Mar 27 03:20:55 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
8) Edit odbc.ini and odbcinst.ini
---odbcinst.ini
# Included in the unixODBC package
[Oracle 10g ODBC driver]
Description = Oracle ODBC driver for Oracle 10g
Driver = /usr/lib/oracle/10.2.0.4/client/lib/libsqora.so.10.1
Setup =
FileUsage =
CPTimeout =
CPReuse =
---odbc.ini
[ora_dns]
Driver = Oracle 10g ODBC driver
DSN = ora_dns
ServerName = xxx.xxx.xxx.121
UserID = vonphoto
Application Attributes = T
Attributes = W
BatchAutocommitMode = IfAllSuccessful
BindAsFLOAT = F
CloseCursor = F
DisableDPM = F
DisableMTS = T
EXECSchemaOpt =
EXECSyntax = T
Failover = T
FailoverDelay = 10
FailoverRetryCount = 10
FetchBufferSize = 64000
ForceWCHAR = F
Lobs = T
Longs = T
MetadataIdDefault = F
QueryTimeout = T
ResultSets = T
SQLGetData extensions = F
Translation DLL =
Translation Option = 0
DisableRULEHint = T
TraceFile = /backup/sql.log
Trace = Yes
9)Testing the driver and the data source
# odbcinst -q -d
[Oracle 10g ODBC driver]
# odbcinst -q -s
[ora_dns]
10) Test connection via ODBC from Redhat2(xxx.xxx.xxx.123) to Redhat1(xxx.xxx.xxx.121)
# isql -v ora_dns
isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directory
I have spent 4 days to search on the internet. But it still error.
Pls help me.

I don't understand your step 7 (the first step 7, actually).
What is that unixODBC-2.2.14-linux-x86-32.tar.gz, where did it come from, and why are you doing all that?
unixODBC should be installed after step 5.
I guess that that is the cause of your problem.
isql is not linked against readline at all on my RHEL 5 system.
Do you notice any improvement after removing the files from that tar.bz file?
Yours,
Laurenz Albe

Lion and Winzip for mac not working

Just upgraded to Lion and Winzip for mac no longer functions any suggestions to fix or workaround?

Any special reason for using WinZip for MAc ?
In need of compatibility with Windows PCs ?
YemuZip http://www.macupdate.com/app/mac/12350/yemuzip is freeware.
Others to be found/tried http://www.macupdate.com/find/mac/zip
Stefan

I'm having serious problems with Lightroom plug in for Facebook not working on my iMac. Help!

It started about a month ago with LR4. I kept getting problems with not being able to publish to Facebook because of problems with the plug-in which had been working perfectly up to then. I had a run round that worked by disableing and reloading the plug in. I upgraded to LR5 but the problem persisted and in fact just became worse. I can no longer publish to facebook from LR. I deleted the LR app in facebook as someone advised but now I cannot re-authorise with Facebook. When I go to the "connect" buton nothing happens. This is a serious problem that may make me reluctantly abandon Lightroom if I cannot find a solution. Can anybody help?

According to the Lightroom Facebook page, Facebook broke it and Facebook has to fix it- there is no ETA.
You can read several posts here (with Adobe responses as well) https://www.facebook.com/lightroom?fref=ts&filter=2

Is ASA integration with ISE and RSA for 2 factor authentication a valid/tested design

Hi,
Customer currently uses ASA to directly integrate with RSA kind of solution to provide 2 factor authentication mechanism for VPN user access. We're considering to introduce ISE to this picture, and to offload posture analysis from ASA to ISE. And the flow we're thinking is to have ASA interface to ISE and ISE interface to RSA and AD backend infrastructure. And we still need the 2 factor authentication to work, i.e., customer gets a SMS code in addition to its login username and password. I'm wondering if ASA/ISE/RSA/AD integrated solution (and with 2 factor authentication to work) is a tested solution or Cisco validate design? Any potential issue may break the flow?
Thanks in advance for any input!
Tina

Hi,
I have an update for this quite broad question.
I have now came a bit further on the path.
Now the needed Radius Access Attribute are available in ISE after adding them in
"Policy Elements" -> "Dictionaris" -> "System" -> "Radius" -> "Cisco-VPN3000".
I added both the attribute 146 Tunnel-Group-Name which I realy need to achive what I want(select diffrent OTP-backends depending on Tunnel Group in ASA) and the other new attribute 150 Client-Type which could be intresting to look at as well.
Here the "Diagnostics Tools" -> "Generel tools" -> "TCP Dump" and Wireshare helped me understand how this worked.
With that I could really see the attributes in the radius access requests going in to the ASA.
Now looking at a request in "Radius Authentication details" I have
Other Attributes:
ConfigVersionId=29,Device Port=1025,DestinationPort=1812,RadiusPacketType=AccessRequest,Protocol=Radius,CVPN3000/ASA/PIX7.x-Tunnel-Group-Name=SMHI-TG-RA-ISESMS,CVPN3000/ASA/PIX7.x-Client-Type=,CPMSessionID=ac100865000006294FD60A7F,.....
Ok, the tunnel group name attribute seems to be understood correct, but Client-Type just say =, no value for that.
That is strange, I must have defined that wrong(?), but lets leave that for now, I do not really need it for the moment being.
So now when I have this Tunnel-Group-Name attribute available I want to use it in my Rule-Based Authentication Policy.
Problem now is that as soon as I in an expression add a criteria containing Cisco-VPN3000:CVPN3000/ASA/PIX7.x-Tunnel-Group-Name matches .* (just anything), then that row does not match any more. It still work matching against NAS-IP and other attributes.
What could it be I have missed?
Best regards
/Mattias

HT4759 I have a windows 8 laptop and I have tried to get set up with Icloud and it is still not working.

I have downloaded etc, and have not been able to login to Icloud...

Have you opened an iCloud account (using an Apple device) yet, or are you trying to create an account now.

XsltListViewWebPart with ParameterBinding and group by, expand not working

Sharepoint2013 SP1
XsltListViewWebPart with ParameterBinding from FormWebpart don't expand groupped data. But without parameter work fine.
How can i solve it?

Hussein,
This turned out to be a bug in 11.2.0.1
As per Oracle SR
Note.8945586.8 Ext/Pub Bug 8945586 - Wrong results using GROUP BY placement:
Description
Wrong results can occur when using GROUP BY placement where the aggregate column gets pruned from select list.
Rediscovery Notes:
Required aggregate columns are missing in the plan in the projection list of operations.
Workaround
set "_optimizer_group_by_placement"=FALSE

CRM 5.0 Integration with Twitter and facebook

HI Experts,
i am working with SAP CRM 5.0 version,
My existing client want to set up SAP CRM with twitter and Facebook specially customor services ,
Does SAP CRM 5.0 has tight integration with twitter and facebook ,
if yes will you please share iinformation in terms of
1)Effort Estimation :manpoer
2)Costing details
Thanking you in advance
Pravin shete

@sherrysarath: Could you share some documents to understand how standards works for this issue? And if there aren't standards requirements, could you share your custom solution.
@pravin wipro : Could you explain what are your requirements?

I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
Loïc

Accordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit

DMS integration with PP and PS.

Hi SAP PLM experts,
I would like to know how mySAP PLM's DMS module is integrated with PS and PP module.
Any small scenario with T codes and configuration help is highly appriciated.
If you guyz have any documents/materials for this question, please mail the same to sudhu03 at gmail dot com.
Thanks in advance,
S.Achar.

It is only through the object linkwhich you provide.
In the business perpective, we attach the contract documents, design drawings and other doucuments to the project for ready referance.
You can create the DIR directly from PS transaction or you can create it in DMS and attach it to the Project.
We do have the red lining to identify teh changes reqd in the document.

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

Quality Center 11 (ALM) Query - Integration with Subversion and Jenkins

Hi OHPCPaT Forum,
Are there any restrictions to enabling the QC integration with Subversion and Jenkins when the QC server is a SaaS cloud instance? Is there any additional config I should be aware of?
Thanks in anticipation

Hi,
Yes all the users are facing the issue. Please find more details for the issue.
Currently we are upgrading Quality Center 10.0 to 11.0 with HP Enterprise Integration module for SAP applications. The project successfully upgraded from QC 10.0 to 11.0 but there are some error popup for the project for which Application Module and Enterprise Integration for SAP applications Version 2.6 was enabled
Quality Center Details:
HP Application Lifecycle Management 11.00
ALM patch level: 07
Quality Center 11.00 Enterprise Edition
Component     Build
OTA Client     11.0.0.6051
User Interface     11.0.0.6051
WebGate Client     11.0.0.6051
Test Run Scheduler     11.0.0.6051
Execution Flow     11.0.0.6051
Site Administration Client     11.0.0.6051
Extension Version
Enterprise Integration for SAP applications     2.6.0.3232
Sprinter     11.0.0.6051
Application Model     2.6.0.917
Installation Steps followed:-
1.Installed HP ALM
2.Installed Patch Service Pack 2 (Patch 2,3,4)
3.Installed Patch 6
4.Installed Patch 7
5.Installed the Extensions HP Enterprise Integration module for SAP applications using Extension Deployment Tool by following the steps provided in the Addin Page
6.Created new project in HP ALM
7.Login to the project (no issue)
8.Enabled the Project Extensions
9.Login to the project (able to access the project but error message is popup when we access Test plan and Defect module)
Note: There is no error when we access the project for which the HP Enterprise Integration module for SAP applications EI not enabled. QC 11.0 is not integrated with any tools.
Let me know is there any step we missed or we need to do any manual steps we need to do before enabling EI

Exchange 2013 owa integration with ADFS and cooexistance with exchange 2007

Team,
I have successfully integrated adfs 3.0 and Exchange 2013 owa and ecp. However, we have a coexistence environment with exchange 2007. When you access owa, which then redirects you to adfs, sign-in, and then get redirected back to owa. If your
mailbox is still within exchange 2007, you get a blank login page. If you mailbox is in exchange 2013 then you successfully get the owa page for 2013. The problem is that all exchange 2007 mailbox users get blank pages at login. So I have determined
that exchange 2013 cas is not doing the service location lookup on the mailbox to determine if a redirect to the legacy owa address is needed. Is there a configuration setting that I might be missing? Or does the integration with adfs and owa not support
the much needed mailbox lookup for a coexistance environment? A side note: if we enable FBA with owa, both login scenarios work just fine (legacy and new 2013). The legacy namespace has been created, and applied to the exchange 2007 urls.

Hi,
Try using AD FS claims-based authentication with Outlook Web App and EAC
http://technet.microsoft.com/en-us/library/dn635116(v=exchg.150).aspx
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Excel integration with Entry and Approval for SSM not working

Similar Messages

Maybe you are looking for