Excel on RDP causes error on PC

Here's a strange one. A user is running an Excel macro on his PC. He has RDPed into another PC, where he is running a different Excel macro. When he does this, one or the other of the Excel's errors!! When he runs these macro's by themselves, they complete
successfully. I am flabbergasted by this. The Excel macros are not referencing anything outside their local machine.
How is it possible that they are affecting each other? Oh, and get this: He runs the two macros on his own machine, under two differnt user profiles, AND THEY WORK JUST FINE!
Anyone have any clues? I'm completely baffled.

Well, I found it myself. It appears that both of these macros were using the Clipboard to copy and paste items as they ran their routine. RDP, by default, enables Clipboard redirection/sharing. So what was happening is that, eventually, one of the macros
would grab the copied data that the other had put on the clipboard and it would error.
This was easily solved by launching RDP, then going into Options>>>Local Resources tab>>>Local devices and resources>>>Uncheck Clipboard
There is also a Group Policy Setting by which you can do this.
We made this change and tested and all is good.

Similar Messages

Code 91 - Caused Error: (Object variable or With block variable not set)

Hi,
We are using FDM 9.3.1. We have enabled batch processing.
We are having following process being followed
- Batch Loader script will pull the data from dwh table for each entity, scenario, year and period
- Batch processing is set to serial and processlevel set to Up-To-Check
- We had following five files created for Location - EMAFF100
i. 1_EMAFF100_ACT_May-2011_RR.txt
ii. 1_EMAFF100_ACT_Jun-2011_RR.txt
iii. 1_EMAFF100_ACT_Jul-2011_RR.txt
iv. 1_EMAFF100_ACT_Aug-2011_RR.txt
v. 1_EMAFF100_ACT_Sep-2011_RR.txt
Batch loader process completed the processing for May - 2011, Jul - 2011, Aug-2011, Sep-2011.
But for Jun 2011 it has given the following error in the 'tbatchinformation' table and failed at import stage.
40751.6239236111 1_EMAFF100_ACT_JUN-2011_RR.TXT 2 2 91-Object variable or With block variable not set
When we checked the view error log from tool menu we found following
** Begin FDM Runtime Error Log Entry [2011-07-27-14:58:29] **
ERROR:
Code......................................... 91
Description.................................. File [1_EMAFF100_ACT_Jun-2011_RR.txt] Caused Error: (Object variable or With block variable not set)
Procedure.................................... clsBatchLoader.mFileCollectionProcess
Component.................................... upsWBatchLoaderDM
Version...................................... 931
Thread....................................... 5600
IDENTIFICATION:
User......................................... ncreighton
Computer Name................................ HYAPSDEV1
App Name..................................... EMATTEST
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ hydev_serv
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... EMAFF100
Location ID.................................. 762
Location Seg................................. 16
Category..................................... ACT
Category ID.................................. 13
Period....................................... Jun - 2011
Period ID.................................... 30/06/2011
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... False
Is Auditor................................... False
We then re submitted data for Jun period and saw batch process got successfully completed and June data got imported successfully and also rest other processes got through.
Can any one provide exact cause for this error? As we have automated the data load from DWH to FDM And then to HFM. Hence when such error comes it disturbs lot of processing there on. Appreciate your early response.
Thanks in advance.

Hi SAP collegues,
At my site, BPC Excel created this problem too "Object Variable or With Block Variable not set" .
It turned out that this is symptom of a a dys-functioning BPC COM Plug-in in XL2007 or XL2010!
This is a consequence that your Excel recently crashed while using BPC. And it relates to an Excel Add-in becoming disabled when the applications crashes. Please check the following.
Note before doing the following, close all other open Excel and BPC sessions.
Within Excel go to File à Options
Select the Add-Ins option on the left
Select the <<COM Add-ins >> option in the Manage drop down, and click Go
Make sure that the Planning and Consolidation option is selected. If not, mark this box and click OK.
If you do not see anything listed, return to the Add-in screen and select the Disabled Items option, and see if Planning and Consolidation is listed there.
Let me know if you have any queries,
Kind Regards,
robert ten bosch

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Excel crash with MSVBVM60 error

Hi
I have a problem with my input schedules, everytime I send data excel crash with an error in msvbvm60.dll.
I have checked that the version of msvbvm60 is the newest one and it is.
I havn't made any system changes in the past dayes and we have the error on at least 2 different PC's and on 2 different AppSets. It was working fine this morning.
The error occures when the dialogbox showing the send data result appear. The data are saved in the database.
Any suggestion on why and how to fix this problem is greatly appreaciated.
J

Please try to install into one computer:Visual Basic 6 runtime files.
You can use the follow link for download.
http://www.microsoft.com/downloads/details.aspx?FamilyID=7B9BA261-7A9C-43E7-9117-F673077FFB3C&displaylang=en
I hope this will help.
Regards
Sorin Radulescu

Bug Report : Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error. "Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

Bug Report :
Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error.
"Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"

What extensions do you have? (Go to Firefox > Customize > Add-ons to see or Help > Troubleshooting info for a copy-pasteable list)

Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
        While testing the Webservice...
               I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
               1. I added the webservice SOAP and added the method.
               2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up. How do I get it to a point that I can delete program?

Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
Clinton

Premiere CC 2014.1 Blu-ray MPEG 2 export causing error in Sony DVD Architect Pro

I've filed a Bug Report for this but wanted to post here in case it helps anyone else or on the off chance someone can give me a solution / better work around.
Something has changed in the results of a Blu-ray MPEG2 export from Premiere 2014.1 vs those of the previous CC version. The result is that my authoring software of choice, Sony DVD Architect Pro, fails to prepare a disc image giving an error in the final stage of preparation. This workflow has been working fine for 2-3 years.
My work around is to export to original format (mxf / XDCAM EX HQ) and then go back to Media Encoder CC rather than 2014 to produce the Blu-ray MPEG2 file, which works without problem.
Here's a copy paste of my bug report in case anyone with a similar setup has an opportunity to replicate (I'd be very grateful to anyone able to confirm whether its a bug or something specific to me that I might be able to fix).
******BUG******
Export from Premiere 2014.1 directly or via Media Encoder of MPEG 2 1080 50i Blu-ray files causes error in preparation of Blu-ray disc in Sony DVD Architect 5.2.
This error does not occur when using the same Media Encode export preset in the previous version of Premiere Pro CC / Media Encoder.
Steps to reproduce bug:
1. Export Sequence from Premiere
Export, in my case XDCAMEX 1080i HQ, using a media encoder MPEG 2 Blu-ray preset:
Preset Name: HD 1080i 25
Format: MPEG2 Blu-ray
Bitrate Settings: Medium (Target 25Mbps)
2. Create DVD Architect 5.2 project
Set up as single movie Blu-ray project in DVD Architect:
Disc format: Blu-ray Disc
Resolution: 1920*1080
Framerate: 35 interlaced
Choose the file exported from Premiere
3 Prepare Disc
- Select Make Blu-ray Disc
- Click Prepare
- Choose Location of iso
- click next then finish
Result
Around 50% - 60% through the process the following error is displayed:
An error occurred while preparing compilation
Details:
File name: STREAM/00000.m2ts
Status: TSWrapper.dll::CTSWrapper::ProcThreadMain::Failed to read ES file. - The ES file may be shorter than the size described in the MUI file.
Expected results:
A shiny ISO ready to be burnt to disc and sent sent to eager customers.
Its taken me a full day and a half to isolate problem - someone remind me why I fall for the software updates every time?!
Cheers
Iain
Other details:
Windows 7 pro 64 SP1
Intel Core i7 950 @ 3.07GHz
RAM 24.0GB
ASUSTeK P6T DELUXE V2
1279MB NVIDIA GeForce GTX 470

There is a known bug in the H.264-Bluray export. I assume it has nothing to do with your issue, but perhaps it will give you something to consider.
https://forums.adobe.com/message/6848505#6848505
It appears due to a malformed xmpses file. It creates a problem on import into Encore, and I think it should do the same upon import into Architect or it would be ignored entirely. The test is to delete the xmpses file and see if that avoids the issue.

Changes in RPCBURZ0 causes errors in other programs

Hello to All,
I made changes to RPCBURZ0 in order to extend the TABLE schema function to read a custom Infotype 9001.
I added the necessary code in RPCBURZ0 and the data definition in RPCFDCZ0.
The code is working perfectly , but the changes are causing errors in other country specific reports
specifically in : HINCALC0 , HCNCALC0 , and HKRCALC0 and Transports to Quality generating errors.
Error is because the custom infotype definition is not seen in these reports.
Generation of the users of the transported Includes                                                                                |
Program HCNCALC0, Include RPCBURZ0: Syntax error in line 000021
The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Program HINCALC0, Include RPCBURZ0: Syntax error in line 000021
The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Program HKRCALC0, Include RPCBURZ0: Syntax error in line 000021
       |   The field 'T9001' is unknown, but there is a fieldwith the similar name 'T001P'. .
Looking at other H--CALC0 reports i could easily spot an include for RPCFDCZ0.
include rpcfdcz0. "customer-specific data declaration (int'l)
I wonder why this include is not in (HINCALC0 , HCNCALC0 , and HKRCALC0) !!!
I have two solutions in mind :
1. Make a custom ZRPCBURZ0 and include it in the main report.
2. Look for user exist for the three reports and add the data definition statement .
What is the best way to fix this situation ? and is there any other possible solutions ?
We are using :
   SAP ECC 6.0
   Payroll International Driver.

Alex Gorly and Matt Sullivan solved one of my issues above:
Message: Attribute 'prod' is not declared for element 'prodname'
I'm still stumpled on the other one:
Message: Not enough elements to match content model '(prodname,vrmlist,((brand|component|featnum|platform|prognum|series) )*)'
As stated above, I've even removed everything from the general rule of <prodinfo> except prodname and I'm still getting the same error. I've searched everywhere for this general rule and <prodinfo> is the only place I can find it.
What I really want is: (prodname), (vrmlist)?, (brand | component | featnum | platform | prognum | series)*
so that vrmlist is optional.
No matter what I do, unless I include a vrmlist, I get the above message. Currently, our CMS can't handle vrmlist but I don't want to remove it altogether because we may be replacing our CMS.
Help please!

System.InvalidOperationException: Call to Excel Services returned an error. --- Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: We're sorry. We ran into a problem completing your request

0
HI All,
I am having problem with the power pivot dashboard.
power pivot dashboard processing job fails with the follwoing error message.
SP 2013 with 2008 r2
SQL 2014 power pivot on new analysis server.
Data refersh of cube and database works finw form the power pivot gallery.
The Execute method of job definition Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob (ID 726034a7-b9a9-45a6-b720-640b3f785e49) threw an exception. More information
is included below. Call to Excel Services returned an error.
ULS error:
EXCEPTION: System.InvalidOperationException: Call to Excel Services returned an error. ---> Microsoft.AnalysisServices.SPClient.Interfaces.ExcelServicesException: We're sorry.
We ran into a problem completing your request. ---> Microsoft.Office.Excel.Server.WebServices.ExcelServerApiException: We're sorry. We ran into a problem completing your request.
at Microsoft.Office.Excel.Server.WebServices.ApiShared.ExecuteServerSessionMethod(Boolean hasSessionId, String sessionId, CoreServerSessionMethod coreWebMethod, String name,
Boolean skipFeatureCheck)
at Microsoft.Office.Excel.Server.WebServices.ExcelService.OpenWorkbookInternal(String workbookPath, Boolean editingMode, String uiCultureName, String dataCultureName, Boolean
newWorkbook, Boolean suppressRefreshOnOpen, Boolean openExclusive, Status[]& status)
at Microsoft.Office.Excel.Server.WebServices.ExcelService.OpenWorkbookEx(String workbookPath, String uiCultureName, String dataCultureName, Boolean exclusive, Status[]&
status)
at Microsoft.AnalysisServices.SPClient.ExcelApi.<>c__DisplayClassa.<OpenWorkbookEx>b__9(ExcelService svc, Status[]& status)
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall)     -
-- End of inner exception stack trace ---     -
-- End of inner exception stack trace ---
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall)
at Microsoft.AnalysisServices.SPClient.ExcelApi.Call[T](String fileUrl, ExcelServiceCall`1 serviceCall, String methodName, Object[] parameters)
at Microsoft.AnalysisServices.SPClient.ExcelApi.OpenWorkbookEx(String fileUrl, String uiCultureName, String dataCultureName, Boolean exclusive)
at Microsoft.AnalysisServices.SPClient.ASSPClientProxy.OpenWorkbookModelForRefresh(String workbookPath, SessionLifetimePolicy lifetimePolicy)
at Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob.RefreshUsageCube(GeminiServiceApplication application)
at Microsoft.AnalysisServices.SPAddin.UsageProcessingTimerJob.Execute(Guid targetInstanceId)
Thanks
Ravi

HI Ravi,
Did you find the solution?
Thanks in advance
Regards,
Faraz Javaid

T410 thin client RDP Client Error Windows XP SP3 issue

I've switched out the VMs they were connecting to completely and we're still running into this issue. The next step is switching out the thin clients themselves. Bump if anyone's run into this issue before.

I'm having an issue with 2 of my HP Smart Zero t410 thin clients. They each RDP into an XP SP3 virtual machine hosted on a virtual server running VWWare ESXi 5.0.0. Randomly in the morning they'll both disconnect from their virtual machines. Sometimes at the same time, sometimes not. I'm monitoring both the thin clients and the virtual machines with software that pings everything 30 seconds, nothing ever drops a ping. I've tested the wire, the wire is good. I've made sure the thin clients are up to date with the latest firmware. The last thing I've tried is replacing the switch both of these machines are connection. One thin client comes up with an error message "RDP Client Error: Reboot Necessary" then below "The firmware has experienced a critical error. Please reboot this client." After I close the error I can RDP back in. The other thin client also gives an "RDP Client Error" and down below mentions MANTICORE but I did not write down the entire error message. I have 30 other t410's deployed at various locations, all connected via RDP to a Windows Server 2008 R2 terminal with no issue for over a year. These last two have maybe in for three weeks and have continuously thrown this error randomly. Any help is appreciated.

Financial Reports import into excel using Smart View - error

All,
I have encountered an error message when trying to use R&A Import.
The message is
Oracle Hyperion Smart View for Office, Fusion Edition
"Excel cannot insert the sheets into the destination workbook, because it contains fewer rows and columns than the source workbook. To move or copy the data to the destination workbook, you can select the data, and then use the Copy and Paste commands to insert it into the sheets of another workbook."
This only affects some users and then they are able to reimport the reports no problem in the same workbook after the error is posted.
Does anybody know how to fix this issue?
We are using Excel 2007, Oracle Hyperion Smart View 11.1.13, Financial Reporting Studio, Hyperion Planning 11.1.13.

Answer appears to be users were using Excel 2007 in compatibility mode. Switching from compatibility mode to saving in Excel 2007 removed the errors.

Why sys_extract_utc(sysdate) never causes error in pl/sql block?

Oracle 11.2
I cannot use
SELECT sys_extract_utc(sysdate) FROM DUAL But I can use
v := sys_extract_utc(sysdate)in a procedure or a trigger without causing any compile or run-time error.
In my opinion, the return value of function sysdate doesn't contain any timezone info, so it should not be able to be used as the parameter of function sys_extract_utc, because it needs timezone info to do the conversion.
Any clues?
Thanks in advance.

Kiran wrote:
use systimestamp it will contain timezone.I know, what I don't know is why sys_extract_utc(sysdate) can be used in procedure without causing any error. It should cause error, right?

Reports Background Engine caused error and had to be closed

"Reports Background Engine caused error and had to be closed"
we are encountering this error when trying to run any report on some machines.with windows 2000.
we tried to login (on the machines having problems) using another windows user,
sometimes it works and sometimes not.
we also tried to reinstall the reports runtime and it never worked.
we have developer 6i, Oracle database 10g express edition.
Does anyone have a solution to this random problem ?
Thanks

dear all
you can pass parameter from form to report to close report server after close report
add_parameter(pl_id, 'oracle_shutdown',text_parameter, 'Yes');
then it will be ok
good luck
Message was edited by:
nim
Message was edited by:
nim

Deleting iMovie files & exported movies causes errors in all of iLife

I just went through quite an ordeal...
In an attempt to clean up some space, I deleted a bunch of my iMovie project files and movies after backing them up (files in the default Movies folder). I have deleted iMovie projects before with no issues.
This time, it caused errors in iDVD, iMovie, and iPhoto...it would say: "Connection failed. The server may not exist or it is not operational at this time. Check the server name or IP address and try again." It would say this over and over and over again and often completely hang up my application so that I would have to force quit. This would repeat itself over and over...
I read about this in other forums and erased .plist files in User > Library, etc...This solved the problem for other people, but it kind of made it worse for me. Long story short, I ended up having to restore from Time Machine my entire system just to get iLife working again... I also searched for Aliases and externally referenced libraries or files, and I do not have any.
So now I have those files again. I want to delete them again. But I'm afraid! (P.S. This may also be related to deleting the Aperture Trial Library in the Photos folder...I am also posting about that to the Aperture forum.)
Does anyone know what the deal with this is? How come before I did not have problems but am now? How do I safely delete iMovie files without having this happen again?
THANK YOU!

iMovie is a non-destructive editor, meaning that all original clips are maintained in the folder, even after editing. Until you render the movie to DVD, all the original files are still "in the background". Kind of hard for me to explain. Others here could give more technical details. You would have to delete your movie from the folder to regain all the hard drive space.
If your idea is to archive your movies, a better method is to record them back to tape. Otherwise, get an external drive to store the finished movies and then delete the original files.
One word of caution about emptying the iMovie trash. This has been known to cause problems with a work in progress and it is generally advised to leave the iMovie trash alone until your project is finished and burned to a DVD.

Excel on RDP causes error on PC

Similar Messages

Maybe you are looking for