Excel process does not end properly

Hello All.
I am using excel in my program writing data into it an excel workbook and then later on reading data from it. I have written down the code of closing excel worlkbook and shutting down excel application hence releasing the handles for it. But when i do that i.e. when the code containing excel workbook closing and excel application shutting down executes, excel workbook is closed but excel process does not end properly and can be seen in the task manager. And when i repeatedly open the excel file through my front end interface and close the file, another excel process is added in the task manager which does not end and so on. What can be the problem and solution. Thanks in advance.
Best Regards.
Moshi.

Interfacing to Excel via ActiveX may be tricky, ending in situations like the one you are facing now.
The basic principle is that every single handle opened to an Excel object (workbook, worksheet, range, variant and so on) must be closed properly for the entire process to terminate gracefully. If a reference remains unhandled at program end you will find an instance of Excel remaining in the task list and you may suffer erratic behaviour in subsequent accesses to the product.
You must double check all references and add approporiate dispose/close commands for every one of them.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Similar Messages

  • Process does not end when binding a object to registry

    I am writing a Unit Test case in which i need to create a datasource and bind it to RMI registry so that the methods i need to test can get a database connection . The problem is that after the test cases have finished running the process does not end and i have to shut it down manually . When i do not bind the datasource , the process ends put with errors because the methods do not get a connection. Even unbinding it after running the test cases does not help.
    Edited by: gurpreetbhalla on Jun 25, 2009 11:56 AM

    public void testIntraDayForClient() throws Exception
              ConstantConfig.JNDI_FACTORY = "com.sun.jndi.rmi.registry.RegistryContextFactory";
              Hashtable env = new Hashtable();
              env.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.jndi.rmi.registry.RegistryContextFactory");
              env.put(Context.PROVIDER_URL, "rmi:");
    InitialContext ic = new InitialContext(env);
    // Construct DataSource
    SQLServerConnectionPoolDataSource ds = new SQLServerConnectionPoolDataSource();
    ds.setURL("jdbc:sqlserver://10.200.41.201:1433;databaseName=TradeportTC");
    ds.setUser("sa");
    ds.setPassword("superuser");
    DataSource d = ds;
         ic.unbind("TCDB_JNDI");
    ic.bind("TCDB_JNDI", ds);
              HttpServletRequest req = new MockHttpRequest();
              HttpServletResponse resp = EasyMock.createMock(HttpServletResponse.class);
              ActionContext context = EasyMock.createMock(ActionContext.class);
              HttpSession session = EasyMock.createMock(HttpSession.class);
              EasyMock.expect(session.getAttribute("ZephyrUserName")).andReturn("sclient90");
              EasyMock.expect(session.getAttribute("ZephyrDomainId")).andReturn("8a48a9cb1860e2a4011860e2c64d003a");
              EasyMock.expect(session.getAttribute("isTrader")).andReturn(false);
              EasyMock.expect(session.getAttribute("accountsDataDB")).andReturn(null);
              EasyMock.expect(context.getSession()).andReturn(session).times(12);
              session.setAttribute("vawTrades", null);
              session.setAttribute("noOfDays", null);
              session.setAttribute("accountNo", null);
              session.setAttribute("exchange", null);
              session.setAttribute("symbolName", null);
              session.setAttribute("trCode", null);
              session.setAttribute("status", null);
              session.setAttribute("accountsDataDB", null);
              EasyMock.replay(session);
              EasyMock.replay(context);
              MyOrdersAction action = new MyOrdersAction();
              action.execute(req, resp, context);
    This is the unit test case which does not exit , if i skip this binding ic.bind("TCDB_JNDI", ds);
    then it exits normally with a failure,

  • Repeat processing does not work properly - label printing MB90

    Hi,
    I created a custom label for 261 & 262 movement types. For this i created a custom page formats and needed settings.
    The system seems to behave strange. when i try to print from MB90 for processing mode 1. The form output is as desired.
    But when i try to repeat processing for previously processed item, it doesn't show the font size and all properly.
    I tried to debug, everything is fine, triggers right form, infact i debuged the form also its the correct one. But does'nt show output properly.
    Also for the new data whne i process and do repeat proecessing print it works...
    Why it does not work for existing data in the system? Why it is behaving strange when it picks up same form.
    Regards,
    Lalit Mohan Gupta.

    This was because... the output type configuration was changed to different printer.
    And that printer was not configured properly...
    Regards,
    Lalit Mohan Gupta.

  • Vba-m process does not end when program is exited

    If I run a game in VBA-M, and while running the game, I exit the program, the VBA-M process continues to run in the background. How do I fix this?

    Oh, interesting...
    I get this but only if I have the window manager tell it to quit. (i3wm) I then have to send a kill 9 to the process. It seems to not be properly responding to kill 15.
    VBA-M will exit properly if I use its own menu option or the ctrl+q shortcut.

  • Firefox sometimes does not end

    14.7.2014
    Firefox 30.0 (German version) under Win 8.1
    Hello,
    Sometimes Firefox does not end properly. When Firefox is re-started I get a message saying Firefox
    is still running although about 10 minutes has passed between end and the re-start.
    Only by killing Firefox in the Task Manager can cure this problem. I use firefox a lot and this occurs about 5 times a day.

    Firefox Keep running in background, that's why your getting this error
    *http://kb.mozillazine.org/Firefox.exe_always_open
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Process does not follow the routing ends up in complete status

    Installed Adobe LiveCycle server ES 2.5 with SQL Server 2008 as database
    And followed the tutorial ‘Create Your First LiveCycle Application’
    Deployed it on the server when I test the same
    i.e. when the workspace user fills in form details and hits complete button it ends up as status complete
    And not assigned to next user in the route
    The process does not follow the routing it ends up in complete status
    And nothing shows up when trying to record and play back the process
    Tried invoking Via workbench too
    no errors in the server log
    Could this be an installation issue any pointers appreciated
    Please advise

    Issue with Jboss as it was taking longtime time to start due to low CPU ideally it should not take more than 3 to 5 minutes
    Process works now

  • Change Password on first use does not work properly.

    I have created apex application user in Oracle Apex 3.2 as follows
    BEGIN
    APEX_UTIL.CREATE_USER(
    p_user_name => 'NEWUSER1',
    p_web_password => 'secret99');
    END;
    As in the documentation
    p_change_password_on_first_use  IN      VARCHAR2    DEFAULT 'Y',
    User should be prompted to change password at first use. But it does not work properly. There is no such message. Still accepts user to log in with old passord that was first given to the user. I have tried explicitly to ensure change password at first log in. by
    BEGIN
    APEX_UTIL.CREATE_USER(
    p_user_name => 'NEWUSER1',
    p_web_password => 'secret99',
    p_change_password_on_first_use =>'Y');
    END;
    Still does not work. How can I ensure user to change password on first login.
    Hasan Al Mamun
    Programmer
    Bangladesh Bank
    Dhaka, Bangladesh

    Might be a long way around the problem but I would utilize a boolean flag in a column (FIRST_LOGIN) your custom auth table set to 'Y' when you create their account. Then on the login page have a page process something like:
    ** NOT TESTED **
    declare
    v_first VARCHAR2(10;
    v_session NUMBER;
    begin
    v_session := APEX_CUSTOM_AUTH.GET_NEXT_SESSION_ID;
    select FIRST_LOGIN into v_first from AUTH_TABLE where user_name = :P101_USERNAME and :P101_PASSWORD;
    if v_first = 'Y' then
    wwv_flow_custom_auth_std.login(
    P_UNAME => :P101_USERNAME,
    P_PASSWORD => :P101_PASSWORD,
    P_SESSION_ID => v_session,
    P_FLOW_PAGE => :APP_ID||':2' *** THIS IS YOUR PAGE TO HAVE THEM RESET THEIR PASSWORD ***
    else
    wwv_flow_custom_auth_std.login(
    P_UNAME => :P101_USERNAME,
    P_PASSWORD => :P101_PASSWORD,
    P_SESSION_ID => v_session,
    P_FLOW_PAGE => :APP_ID||':1' *** MAIN LOGIN PAGE *****
    EXCEPTION WHEN OTHERS THEN
    *** handled **
    end;
    The page 2 in this example would have an few items for them to enter their new password twice, a page process to update their password in the auth table and then redirect them to the intended first page.
    Not sure if it meets your setup.
    Ricker

  • OdiStartScen threw "The scenario did not end properly" Exception

    Hello,
    I tried to use ODI to do the "CDC", but OdiStartScen, which i used to start the scenario continually, threw "The scenario did not end properly" Exception at the end of process of my package. The process is "OidWaitForLogData --> extend window --> interface --> purge window --> OdiStartScen";
    java.lang.Exception: The scenario did not end properly.
         at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
         at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
         at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
         at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.g.y(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Thread.java:595)
    OdiStartScen "-SCEN_NAME=JOURNALIZEPACKAGEDEMOSCEN" "-SCEN_VERSION=002" "-CONTEXT=GLOBAL" "-LOG_LEVEL=5" "-SYNC_MODE=1" "-ODI_USER=SUPERVISOR" "-ODI_PASS=d,yXgLJMwXJsIhe0qMX.X9PPn"
    Does anyone have an idea of what is the problem ?
    regards

    (From ODI user's guide/MODEL/ Change Data Capture)
    Using Changed data in Consistent journalizing is similar to simple journalizing regarding interface design. It requires extra steps before and after processing the changed data in the interfaces, in order to enforce changes consistently within the set.
    Operations Before Using the Changed Data
    The following operations should be undertaken before using the changed data when using consistent set journalizing:
    Extend Window: The Consistency Window is a range of available changes in all the tables of the consistency set for which the insert/update/delete are possible without violating referential integrity. The extend window operation (re)computes this window to take into account new changes captured since the latest Extend Window operation. This operation is implemented using a package step with the Journalizing Model Type. This operation can be scheduled separately from other journalizing operations.
    Lock Subscribers: Although the extend window is applied to the entire consistency set, subscribers consume the changes separately. This operation performs a subscriber(s) specific "snapshot" of the changes in the consistency window. This snapshot includes all the changes within the consistency window that have not been consumed yet by the subscriber(s). This operation is implemented using a package step with the Journalizing Model Type. It should be always performed before the first interface using changes captured for the subscriber(s).
    Designing Interfaces
    The changed data in consistent set journalizing are also processed using interfaces sequenced into packages.
    Designing interfaces when using consistent set journalizing is similar to simple journalizing, except for the following differences:
    The changes taken into account by the interface (that is filtered with JRN_FLAG, JRN_DATE and JRN_SUBSCRIBER) are not automatically purged at the end of the interface. They can be reused by subsequent interfaces. The unlock subscriber and purge journal operations (see below) are required to commit consumption of these changes, and remove useless entries from the journal respectively.
    In consistent mode, the JRN_DATE column should not be used in the journalizing filter. Using this timestamp to filter the changes consumed does not entirely ensure consistency in these changes.
    Operations after Using the Changed Data
    After using the changed data, the following operations should be performed:
    Unlock Subscribers: This operation commits the use of the changes that where locked during the Lock Subscribers operations for the subscribers. It should be processed only after all the changes for the subscribers have been processed. This operation is implemented using a package step with the Journalizing Model Type. It should be always performed after the last interface using changes captured for the subscribers. If the changes need to be processed again (for example, in case of an error), this operation should not be performed.
    Purge Journal: After all subscribers have consumed the changes they have subscribed to, entries still remain in the journalizing tables and should be deleted. This is performed by the Purge Journal operation. This operation is implemented using a package step with the Journalizing Model Type. This operation can be scheduled separately from the other journalizing operations.
    To create an Extend Window, Lock/Unlock Subscriber or Purge Journal step in a package:
    Open the package where the operations will be performed.
    Drag and drop the model for which you want to perform the operation.
    In the Type list, select Journalizing Model.
    Check the option boxes corresponding to the operations you want to perform.
    Enter the list of subscribers into the Subscribers group if performing lock/unlock subscribers operations.
    Click OK.

  • TestStatnd operatore Interface does not close properly

    Hi
    I am using LabVIEW 8.2 and TestStand 3.5. I use the default Operatore Interface (full featured) provided by NI. The TestExec.exe does not close properly when I exit the application. Everytime the process is running in windows. I had to use Windows Task Manager to kill the TestExec.exe manaully.
    Is there a fix for this?
    Thx
    Abdulla

    Hi,
    Do you start any new executions either from within your sequences or from within a step that you are not closing properly?
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Image display control scrolling does not work properly when zoomed in

    I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
    Has anyone noticed this behaviour, and what would be a reliable solution to avoid this? 
    Dirk

    Hello,
    no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
    I have attached a VI for simplicity (although there is hardly any code in it).
    If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position. 
    I think it is a bug in the implementation of the image display control.
    Thanks,
    Dirk
    Attachments:
    scrolling.vi ‏818 KB

  • SSRS report does not rendering properly in sharePoint 2013

    Hi everyone,
    I'm a newbie with the MSBI development tool, I've tried to create a testing SSRS reports and its layout showed correct when preview them in Visual Studio (2010 and 2012). Then I migrated the report in SharePoint 2013, but the layout do not rendering as I
    expected, some data mix-up on the matrix table
    The Ident on detail data (drill down) does not render properly compare the layout in when preview in Chrome or Visual Studio (SSRS)
    The summation on second matrix table went wide on both browsers compare when preview thereport in Visual Studio
    The export PDF (using the "action" button on the report in the browsers) showed the second matrix table is overlaps the first matrix table.
    This report has 3 main queries (2 for the matrix tables and 1 for the chart) on a Dev environment:
    Window server 2008 R2 with service pack 2
    SQL server 2012 enteprise with service pack 2
    SharePoint 2013 (no service pack) with integrated mode on the report service 
    Visual Studio 2010 development tools
    I'm very appreciate for anyone can provide any solution to solve this issue.
    Thank you so much,
    Dac.
    P.S.: I attached the preview of the report in both browsers (IE & Chrome) and its preview in Visual Studio.
    An update: ... due to the setting space on"snap to grid" default to 20 and I've made the 2nd matrix table overlaps the 1st one, therefore the it showed overlaps when export to PDF file ... it's solved.
    But the Indent on IE and summation still persist in both browsers.

    Hi everyone,
    The PDF's export has been solved due to the 2nd matrix table overlaps on the 1st table. 
    Also, I don't know why the summation (aka Row Total) went wide when data represented on the 2nd matrix table (see previous post on the row named as "Premium over 5000$" on both browser. So I've redesigned the 2nd table as normal table instead of
    matrix table ... and the summation showed correct (it's so weird)
    For the "Indent" issue showed in IE on both drill down of the 1st table and 2nd table which cannot be fixed, and the end user used only IE.
    Could someone can enlighten me please?
    Many thanks.

  • Update process does not work on Tabular Form

    Hello,
    I have 2 tabular forms on one page, which are using manual update processes.
    First form is created using wizard, and therefore works perfectly.
    The update process is as follows:
    DECLARE
      lc_string VARCHAR2(4000);
    BEGIN
      FOR i IN 1..APEX_APPLICATION.G_f01.COUNT
      LOOP
         lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*03*(i) || '|' || APEX_APPLICATION.G_f*04*(i) || ']';
      END LOOP;
      --Database processing using the concatenated string here
    END;Second form is created manually, using the following code:
    SELECT apex_item.checkbox (30,
                               '#ROWNUM#',
                               'onclick="highlight_row(this,' || '#ROWNUM#'|| ')"',
                               NULL,
                               'f30_' || '#ROWNUM#'
                              ) delete_checkbox,
           CATALOG_ID,
              apex_item.hidden (31, CATALOG_ID)
           || apex_item.text (32,
                              LANG,
                              80,
                              100,
                              'style="width:100px"',
                              'f32_' || '#ROWNUM#'
           || apex_item.hidden (33, wwv_flow_item.md5 (LANG, DESCRIPTION)) LANG,
           apex_item.text (34,
                           DESCRIPTION,
                           80,
                           100,
                           'style="width:255px"',
                           'f34_' || '#ROWNUM#'
                          ) DESCRIPTION
      FROM V_CATALOGS
    UNION ALL
    SELECT     apex_item.checkbox
                              (30,
                               TO_NUMBER(9900 + LEVEL),
                               'onclick="highlight_row(this,' || '#ROWNUM#' || ')"',
                               NULL,
                               'f30_' || TO_NUMBER (9900 + LEVEL)
                              ) delete_checkbox,
               NULL,
                  apex_item.hidden (31, NULL)
               || apex_item.text (32,
                                  NULL,
                                  80,
                                  100,
                                  'style="width:100px"',
                                  'f32_' || TO_NUMBER (9900 + LEVEL)
               || apex_item.hidden (33, NULL) LANG,
               apex_item.text
                                               (34,
                                                NULL,
                                                80,
                                                100,
                                                'style="width:255px" '  ,
                                                'f34_'
                                                || TO_NUMBER (9900 + LEVEL)
                                               ) DESCRIPTION
          FROM DUAL
         WHERE :P18_TEMP = 'ADD_ROWS1'
    CONNECT BY LEVEL <= 1However, the update process does not work on this form.
    I created it using the first one as an example, but with the id's of the second form:
    DECLARE
      lc_string VARCHAR2(4000);
    BEGIN
      FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
      LOOP
         lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*32*(i) || '|' || APEX_APPLICATION.G_f*34*(i) || ']';
      END LOOP;
      --Database processing using the concatenated string here
    END;Also, both forms are opening in a modal pop-up dialog window.
    I use a Dialog Region plug-in for that.
    Please advise, what is causing a problem with update?

    Sloger,
    if this is your tabular form
    SELECT apex_item.checkbox (30,
    ...and this is your update statement
    FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
    ...Then you will only ever update records that have been checked. Unchecked checkboxes are not passed back in the global array. You need to have a hidden column with the ID's for the record and loop through that when you are updating/inserting. That is why the built in tabular form has a MRU and a MRD. the MRU loops through the hidden ID column. The MRD loops through the checkbox.
    Thanks,
    Tyson Jouglet

  • Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.

    Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.
    Solutions?

    No, I never really found an easy solution.  I believe it is an issue with some corruption in the iTunes database on the specific device.  In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs.  A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup.  It did work, so I imagine it would probably work for my current issues with the iPhone and iPad.  But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost.  When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might.  If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
    None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it.  I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
    Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

  • Integration Process does not start

    Hi guru's
    My scenario is this. From ECC we send Idocs to PI. We have an integration process to receive the idocs because only max 9999 are passed in the port.
    We run just around 11000 CREMAS idocs now.
    The problem is that the integration process does not start on our QA environment while it does start on DEV environment.
    I've run many checks on both environments and they all look the same.
    To name a few:
    * Cache are all green and up-to-date.
    * I checked the WF models which are behind the Integration Process and they are the same.
    * Event correlation is correct in both environments
    * When i test the idocs are correctly sent from ECC to PI.
    However on DEV I see in transaction SXMB_MONI_BPE i see that the integration process is triggered and started. It waits 10 minutes and collects any messages that come in, and then bundles these and sends them on to the receiver.
    On QA i do not see the Integration Process being started. Only records i see in SXMB_MONI_BPE are three work items, 2 completed, 1 ready, all 3 are called waiting for event.
    I'm probably missing some configuration somewhere but what could it be?
    Regards
    Robert

    Hi Eng Swee,
    Thx. I checked it already and it works fine.
    Meanwhile i did do some changes and some retests and now i saw somewhere that all my tests were creating more steps in an already started integration process, that was still waiting.
    I now cleared some old workitems and started afresh.
    What i see now is:
    1)  the BPM process start correctly
    2)  it receives 1 or 2 or 3 or n messages
    3)  it then waits for the deadline to finish, i.e. it should run for 10 minutes and then proceed to the next step which is sending the collected idocs to receiver.
    On DEV the deadline works fine. On QA it doesn't.
    IN SWU3 i have done the customizing and it shows green, so that part is OK.
    Still the deadline is passed and it doesn't have the desired effect on mu BPM process (workflow).
    Are there any other checks i can do to see if the deadline mechanism is properly working?
    Is there a maybe a manual step i can do to trigger the deadline? Then at least i get some information on where the real problem is.
    (Sorry for earlier confusion but i hadnt realized that there was still a process running)
    Regards
    Robert

  • My I Mac does not start properly without pressing option and apple keys ,and it freezes

    My I Mac does not start properly without pressing option and apple keys ,and it freezes

    Try any of the following:
    http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM  
    Disconnect all devices from the computer then do the following:
    Boot up from your Snow Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
    If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
    Troubleshoot the spinning beach ball/freezing & crashing 

Maybe you are looking for

  • Ipod cannot be updated. Unknown error -1417

    Hi Everyone, When i try to update to 1.2 of my Video iPod (30GB), i always receive "ipod cannot be updated. Unknown error -1417" I use Windows 2000 SP4 (with latest patches&updates) + iTunes 7.0. Is this a known bug with iTunes or something wrong wit

  • How do i display 2 amplitudes with unknown range limits

    How do i display 2 amplitude values in graphs with uknown data for range limits. if both could display in the middle of the graph would be great. Any inputs would help me greatly. Thank you, Ran

  • No sound after 10.4.8 upgrade

    I just upgraded to 10.4.8 and updated firmware to try and bandaid RSS issue until after the semester, and now sound only works with iTunes, and system messages. Quicktime, web, nor any other app allows sound. Any Help?

  • MacBook Pro Battery overheating and expanding

    I purchased a MacBook Pro three years ago and have not had any problems with it. However, during the last month the battery has been getting very hot. And within the last week or two, the battery cover has been expanding and coming loose. I'm guessin

  • Can I use apple sharing with my windows 7 pc and apple tv?

    Would like to go to atv select computrt so I can access my photos and home video from my windows pc to my atv