Excel shuts down upon opening files with macros

I have an Excel workbook/file with a macro (that I created, by the way) that will not open anymore. It shuts the application down upon trying to open the file. Also, on another version of the document, from which I've removed the macro, it asks me every time I open it, if I want to disable/enable macros (but there are none there)
I am running Mac OS X (10.4.11), on a Mac Pro, Dual-Core Intel Xeon, 2.66 GHz, 1 GB RAM, MS Excel 2004 version 11.4.1
Any idea what is going on?

Any idea what is going on?
Well firstly, you've posted this in the Using iPod touch forum for some reason...
Secondly, these are the Apple support forums, whereas Excel is a Microsoft product.
I'd suggest trying here: http://www.microsoft.com/mac/help.mspx

Similar Messages

Photoshop Elements shuts down upon opening

as of this past saturday after opening up photoshop elements 8 program, it shuts down after approx. 4 to 6 seconds, what is the fix to this problem. thanks!

Ronzie, thanks for the response, If I delete my Photoshop Elements 8 and install PSE 10, can I import the old photos that used to be in Photoshop Elements 8 into PSE 10?
thanks! Mike Cardenas
Date: Wed, 16 Nov 2011 20:40:39 -0700
From: [email protected]
To: [email protected]
Subject: Photoshop Elements shuts down upon opening
Re: Photoshop Elements shuts down upon opening created by ronzie99 in Photoshop Elements - View the full discussion
If you normally open with Organizer perhaps it is encountering a corrupt image in its cached folder on opening.
I just installed PSE 10 and set up a shortcut to go right to the full editor. See if that works for you.
If you have a lot of disk activity on starting, more than usual, previously installing certain plug-ins requires PSW to rebuild its cache system where these are stored.
In Organizer if you can set a preference to not open up the last folder used automagically, you might get it to start. Then when selecting folders to browse you can note which folder causes a crash. If you start the editor directly perhaps in preferences you'll find an Organizer setting to try this out.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4031101#4031101
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4031101#4031101. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HELP!!! v7, Organizer shutting down upon opening

Please help!!
I have Elements v7 running on Vista...PSE has never given me a problem. However, recently, when I open the program it gives me a message and says it needs to shut down. I read online and tried to reset my preferences but that did not work.
Upon opening I can open Editor but not organizer. Also tried to open Organizer via Editor. Still not working.
Any help would be great. Below is the message it gives me.
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    PhotoshopElementsOrganizer.exe
Application Version:    7.0.0.0
Application Timestamp:    48d000e8
Fault Module Name:    AdobeOLS.dll
Fault Module Version:    3.0.9.15
Fault Module Timestamp:    467f7ce1
Exception Code:    c0000005
Exception Offset:    000033a0
OS Version:    6.0.6002.2.2.0.768.3
Locale ID:    1033
Additional Information 1:    e6c9
Additional Information 2:    b7dd111ce5e172406e81f253cbf38088
Additional Information 3:    437e
Additional Information 4:    60d9666c46f63eee81b8490f0d3ff85b
Thank you for any assistance you may have.
Also, if I reload PSE what happens to my organized images within organizer??? yikes!!

Try renaming the below folder and then launch the application again:-
1) Online Services
2) Photoshop Elements
These folders are present at :- C:\Users\<current user>\AppData\Roaming\Adobe

Elements 8 shuts down upon open

Every time, exept the very first, I have tried to open my photoshop elements v8 it shurts down on open. It says there is an error and my computer will tell me when there is a solution. I tried uninstalling and reinstalling. This came with a tablet I bought and I would like to use it. Please any help you can give would be great.
P.S. this only happenes when I try to edit, organize works fine.

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 10\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

USB Headphone Mic shutting down upon opening Ventrilo

I've had my Fatality headset for a solid 6 months now. A couple of nights ago, after logging off of my vent serverto go onto another server, I lost the "ability" to speak. I can hear everything fine (vent, TS, "in game", music, movies).
My push to talk, and setting in Vent Setup, are all set (L-Alt and USB Headset). My outbound/inbound settings are where I've always had them. The mute buttons are set to off also. What I've noticed is that on the Volume Control of the headset the "on air" light turns off as soon as I log onto a vent server or try to use the Windows media recorder. When I turn those things off, the light comes back on. When I run the setup of Ventrilo, the light comes back on, but when I try to engage the Test Mode (in the Setup menu) the light shuts down (and thus the mic does also).
I've tried testing the hardware (via Control Panel>Sounds), but when I get to the stage where I'm asked to speak and the mic is engaged, the light turns off (and I assum I'm muted).
I've updated to the new drivers about 10 minutes ago, with no fix. I reapplied the latest (October) firmware as well.
Edit: XP Pro, [email protected]
Message Edited by MennoniteDan on 03-22-2009 09:37 PM

Yep..exact same thing happened to me. I plug in my older Logitech into onboard jacks..fine. Plug in the USB Fatality, vent stops working, have to restart. So, desperate gamer that I am, I shoot out the Microcenter and pick up a Fatality headset with 3.5mm jacks instead of USB (frankly..its been flaky since day 1). Started fine, but after a "mic check" I got complaints of robot and garbled voice..then nothing. 3 minutes..completely unusable. I tried changing the settings(in Vista) and the Sounds panel would crash when I tried to set the headset mic as default as opposed to "What you hear." general exception faults..uninstalled/reinstalled all software and drivers. I then install my Fatality X-Fi XtremeGamer card, still no dice..restart, and the old Logitech works. plug in the Fatality, dead. I sighed a few times, then I tried another card, X-Fi XtremeMusic. I wasn't expecting much and thats what I got, nothing. So I am back to the onboard sound and a 2 year old Logitech head set with no left ear action, but it works. It seems interesting I am only having problems with the Fatality stuff.

"Run Command" executing upon opening file with explicit doctype

I have noticed that when I open a file that has the !doctype
explicitly set that it does a "Run Command." Why is this and how do
I get it to stop? Is it something in my code that's triggering it,
or is it because the !doctype is set?

What line breaks? How is it changing them? Or are you talking
about how
you have formatted the code?
Sorry - I can't help you with that if you are. But are you
DMX6.0 or 6.1?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"anubia" <[email protected]> wrote in
message
news:[email protected]...
> When I open up a file in Dreamweaver MX that has the
!doctype explicitly
> set to
> transitional or strict, the "Run Command" executes and
changes all of my
> line
> breaks and I get the asterisk. I ran it through the W3C
validator and it
> validates, so why is this happening? Here is a sample
page (I've
> reintroduced
> spacing):
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Strict//EN"
> "
http://www.w3.org/TR/html4/strict.dtd">
> <html>
> <head>
> <title>San Francisco Black Firefighters:
Calendar</title>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> <link href="sheets/sfbfa.css" rel="stylesheet"
type="text/css">
> </head>
>
> <body id="sfbfa">
> <div id="container">
> <div id="header"><a
href="index.html"><img id="logoicon"
> src="images/logo_065.gif" alt="San Francisco Black
Firefighter's
> Association
> Logo" />
> <img id="logotext" src="images/sfbfa_short.gif"
alt="San Francisco Black
> Firefighter's Association" /></a>
> </div>
>
> <div id="navbar">
>
>
<a href="message.html">President's
Message</a></li>
>
<a href="about.html">About</a></li>
>
<a href="board.html">Board</a></li>
>
<a href="yacademy.html">Youth
Academy</a></li>
>
<a href="news.html">Newsletters</a></li>
>
<a href="calendar.html">Calendar</a></li>
>
<a href="membership.html">Membership</a></li>
>
<a href="memorium.html">In Memorium</a></li>
>
<a href="links.html">Links</a></li>
>
<a href="contact.html">Contact Us</a></li>
>
> </div>
>
> <div id="maincontent" class="calendar">
> 
>
> <h1>Calendar</h1>
> <h2>Event Name<br />
> event date/time</h2>
> <p>At vero eos et accusamus et iusto odio
dignissimos ducimus qui
> blanditiis
> praesentium voluptatum deleniti atque corrupti quos
dolores et quas
> molestias
> excepturi sint occaecati cupiditate non provident,
similique sunt in culpa
> qui
> officia deserunt mollitia animi, id est laborum et
dolorum fuga.</p>
>
> <h2>Event Name<br />
> event date/time</h2>
> <p>rerum facilis est et expedita distinctio. Nam
libero tempore, cum
> soluta
> nobis
> est eligendi optio cumque nihil impedit quo minus id
quod maxime placeat
> facere
> possimus, omnis voluptas assumenda est, omnis dolor
repellendus. </p>
> 
> </div>
>
> <div id="footer">
> <p class="copyright">© 2005 San Francisco
Black Fire Firefighters
> Association.
> All rights reserved</p>
> </div>
> </div>
> </body>
> </html>
>

Macbook Pro 10.6.8 won't shut down. Blue screen with spinning wheel.

it's an 15 inch macbook pro. since I bought this computer was working fine about last year. Somehow, start of this year, the problem begins. Everytime when i opened microsoft word 2011 on mac or Photoshop cs5, and quit the software as normaly. When i try to shut down the blue screen with spinning wheel apears. this spining wheel is endless. But funny thing is that after use other software such as games, web browser (safari) etc. and quit them. when i shut down there was not a problem. only word 2011 for mac and adobe photoshop cs5. Any solutions?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or freeze, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search that archived log, and if necessary the older ones below it, for the same information.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Do the same with kernel.log.
Step 3
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

Can´t open files with camera raw

Hi!
I use Adobe Photoshop CS3 and the option to open files with Camera Raw is disabled in Bridge and in PS.
Can anyone help?

While each situation can be different this has been discussed on several threads. Scan down the list or do a search. If you can't find the answer, post a note.

Problem opening files with Mac OS Mavericks and Elements

I have recently installed Mac OS 10.9.x Mavericks. Since this I have had problems opening files in Elements 11. I upgraded to Elements 12, blindly hoping the problem would fix itself, however it hasn't.   When I try to open a file the Finder window pops up then disappears immediately. Occasionally it will stay open until I scroll down but then closes.   I keep the files on an external drive but the drive is working with all other applications, so I don't think it is that. If anyone has had a similar problem and has any ideas I would be grateful as the program is unusable for now. Thanks very much in anticipation

Hi Sjmitc, I followed Barbara's instructions about only about 24 hours ago and since then my files have been opening perfectly. I tried it again before replying to you and they are still opening fine.
I did have to go through my files a couple of times to find all the Elements preferences, but the solution is working fine so far. I will let you know if I have any further problems. It is maddening when it happens, so I hope you can fix yours.
Best of Luck
Date: Wed, 6 Nov 2013 18:23:28 -0800
From: [email protected]
To: [email protected]
Subject: Problem opening files with Mac OS Mavericks and Elements
    Re: Problem opening files with Mac OS Mavericks and Elements
    created by sjmitc in Photoshop Elements - View the full discussion
Henwen, Is this solution still working for you? I tried this same solution on mine a few days ago and had no luck. However, it actually let me open files this afternoon then when I went back in later today, it was doing the disappearing act again.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5821793#5821793
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5821793#5821793
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5821793#5821793. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Process.start("winword", filename) can not open file with space in the path and name

Hi,
I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
the problem: if the path or file name has space in it, even it exist, winword still can not open it.
could someone kindly show me what I did wrong and how to do it properly.
Thanks in advance.
Belinda
public static class FileOpen
public static void info()
string path = @"c:\a temp folder\aaa 1.txt";
if (File.Exists(path))
    // the file I am using in the sample does exist
     MsgBox.info("yes");
else
     MsgBox.info("no");
// working
//Process.Start("winword", "c:\\aaa.txt");
// not working
//Process.Start("winword", "c:\aaa.txt");
// not working
Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
// not working
Process.Start("winword", path);

string AppPath;
AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
try
System.Diagnostics.Process.Start("Winword.exe", FileName);
can any body please help for this.
where i am making mistake?

Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path

Snow Leopard 10.6.2 CS4 InDesign can't open files with a "#" in file path using any of these perfectly normal methods:
1. double-click file in the Finder (e.g in a Folder on your Mac or on your Mac desktop etc.)
2. select file and choose "File... Open" command-o in the Finder
3. drag file to the application icon in the Finder.
4. Select file in Bridge and double-click, choose File.. Open.. or Drag icon to InDesign icon in dock.
If you try to open an ID file named with a "#", you will get an error message "Missing required parameter 'from' for event 'open.'"
This happens to any InDesign file that has a "#" (pound sign, number sign, or hash) in the filename or in the file path (any parent folder).
To reproduce
Name an InDesign file Test#.idd Try to open it in the Finder or Bridge (as opposed to the "Open" dilaog of InDeisng itself).
"Solution"
The file WILL open using File... Open... command-o while in InDesign application.
Rename the file or folders that have a "#" (shift-3) in the filename.
Report to Adobe if it bugs you.
This does not occur in "plain" Leopard 10.5 nor Tiger 10.4
Untested in Panther or before and
Untested with CS3 and earlier in Snow Leaopard.
Anyone have those and want to try this... ?

In case this really bothers you: we've added a workaround for this into Soxy. If you enable the option, these documents will open fine on double-click.
You need Soxy 1.0.7 from:
http://www.rorohiko.com/soxy
Go to the 'Soxy' - 'Preferences' - 'Other' dialog window, and enable 'Open InDesign via Script'
(Irrelevant background info (it's all invisible to the user): the workaround works by special-casing how Soxy opens documents in InDesign: instead of using AppleScript, Soxy will use ExtendScript to instruct InDesign to open the document - which works fine).

Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program. This problem appears after opening 4 a 5 files.

Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program.
This problem appears after opening 4 a 5 files, rebooting helps another 4 a 5 times and appears again.

I'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck.

Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!

Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!
- Tried to Reset the preference with CTRL + Click.
- It's just new clean install didn't do anything with it yet.
- Windows 8.
Any help?

Just that one project, or any project? Can you create new projects?

Photoshop CS6 (Mac) crashes when opening files with type or using the type tool

Hi,
Photoshop CS6 keeps crashing when using the type tool or when opening files with type on it. I've quit suitcase, disabled the suitcase plug-in, reset the preferences in Photoshop there's no crash report coming up either the application just dies! I am currently trying a system restore from time machine to see if that works!. Any other suggestions would be greatly appreciated.
Many thanks
Olly

http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html

Indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.

indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.
thanks in advance!

If you are unable to enter the passcode into your device, you will have to restore the device to circumvent that passcode.
Is the music purchased from iTunes? If it is you can contact iTunes support and ask them to allow you to re-download the music that you purchased from iTunes.
Also, do you sync the device regularly? When syncing an iPod Touch/iPhone a backup file is made. That backup file doesn't contain your music but it does contain your address book, application data, pictures, notes, etc. After restoring your device, you can try restoring from the last backup that was made of your device so you will not have to start over completely from scratch.
Hope this helps!

Excel shuts down upon opening files with macros

Similar Messages

Maybe you are looking for