Excel Source - Opening a rowset for "EFT$" failed. Check that the object exists in the database.
Why oh why do I sometimes get this error when defining my Excel Source and then sometimes I do not?
Am I doing something wrong here???
The error is...
Exception from HRESULT: 0xC02020E8
Error at Data Flow Task [[Excel Source[27]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error at Data Flow Task [Excel Source [27}}: Opening a rowset for "EFT$" failed. Check that the object exists in the database.
I know the Worksheet "EFT" exists because I defined this previously for the same Excel spreadsheet.
Thanks for your review and am hopeful for a reply.
PSULionRP
A reply from CozyRoc must be hitting the nail on the head
sheet name contains $
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ce0fbff5-f5f1-4a4a-9c29-6adc32b0fd79/using-excel-file-as-source-in-data-flow-task-of-ssis-bi-2005-need-example-of-sheetnamecellrange?forum=sqlintegrationservices
Arthur My Blog
Similar Messages
-
example of generating excel dynamically in ssis? geting error [Excel Destination [190]] Error: Opening a rowset for "Excel_Destination$" failed. Check that the object exists in the database.
Hi Vijay
Can you be little bit more specific, did you receive this error when you are designing this pacakge using BIDS
Becuase when you are designing this pacakge in BIDS, you need to manaually create a excel sheet manually for the first time you run,
are you creating excel sheet using execute sql task and excel connection with input from a variable?
Did you receive this error in validation phase or execution phase ?
Can you share your query to create table in excel ?
http://sqljunkieshare.com/2012/02/28/how-to-create-and-map-excel-destination-dynamically-in-ssis/
Use the above post -
Hi,
i am trying to load the data from excel sheet using For each loop container in ssis 2005.
But it gave me the below error:
Error: Opening a rowset for "Sheet1$" failed. Check that the object exists in the database.
[DTS.Pipeline] Error: "component "failed validation and returned validation status "VS_ISBROKEN".
Error: There were errors during task validation.
Could you please let me know the solution
Regards
SqlstudThat message usually means validation has failed;
Have any of the underlying tables changed? Data types, lengths, maybe even column ordering, etc...?
try this..
Right-click on the Data Flow Task and select Properties. Then set DelayValidation =TRUE.
Let us TRY this |
My Blog :: http://quest4gen.blogspot.com/
Thanks ETL.
Everything is fine..(Datatypes,length,orderings etc)
Already i have set
DelayValidation =TRUE.
IS there any other problem?
Regards
Sqlstud -
Why is Mail asking me for the name of an smtp server for an email address that doesn't exist?
I've migrated from Snow Leopard to Mountain Lion on a new Mac, but in trying to use Mail on ML, it keeps asking me for the name of an smtp server for an email address that's never existed. The addy has my user name correct, but the server part of the address doesn't exist, or at least I've never used an email address with that provider. On ML there's no plist file for Mail, so nothing to delete there. What else can I do to get Mail working? The only other option I have is to abandon Mail as being crippled and useless, and use Postbox, which for it's price (US$9.95) is an attractive option. OTOH, I've paid for Mail after all, so it really ought to work. Any clues as to what I can do to stop its nonsensical behaviour? How do I file a bug report?
TIA.
PaulineAmasis wrote:
On ML there's no plist file for Mail, so nothing to delete there.
~/Library/Containers/com.apple.mail/Container.plist
(Go to your Finder "Go" menu hold the option key to choose "Library", since the ~/Library is hidden on ML) -
Hi Guys,
We have created a custom package where in we are trying to call the standard API's of Oracle projects i.e PA_PROJECT_PUB.When we are trying to call these APIs we are facing the below issue.
We have tried testing in two instances ,Initially it worked in both instances.
Using the same API's multiple times we tested the same data set in these instances.
For the first few runs it works fine.But when we go on using the same API's again and again for our testing we face now and then the below issue.
Standard API's
=========
add_task
update_project
change_structure_status
create_draft_plan
Error:
ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o2670336.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. in Package PA_PROJECT_PUB Procedure update_project:ORA-0000: normal, successful completionError while publishing the task
Please let us know if anyone of has come across the same situation.
Regards,
VijayBut have issue only with validating invoice batch. I followed metalink ID's 605542.1, 167990.1,261693.1,1088553.1,749491.1, 461271.1 and few more.Was this working before? If yes, any changes have been done recently?
Please see if these docs help.
APXAPRVL: Invoice Validation Errors With MSG-00001 and REP-1419 [ID 333305.1]
Invoice Validation Errors When Others:101505:Non-Oracle Exception Rep-1419 [ID 464125.1]
Invoice Validation Fails with REP-1419 Error in Ap_approval_matched_pkg.Execute_matched_checks [ID 293425.1]
Invoice Validation Failing On Fnd_file Could Not Write To File L0202306.Tmp [ID 461520.1]
Invoice Validation (APPRVL) Errors ORA-20001 APP-SQLAP-10000 PSA_FUNDS_CONTROL_PKG.glxfck [ID 463184.1]
Validate Invoice Error With ORA-20001: APP-SQLAP-10000: AP_FUNDS_CONTROL_PKG.Calc_QV [ID 432702.1]
Invoice Validation Program Is Erroring Out [ID 382844.1]
Error On Validation Of Invoices From Previous Periods [ID 412814.1]
Thanks,
Hussein -
I have a lot of money on my Apple ID but when I try to buy something it ask for my security questions that I do not remember the answers to. I also don't have access to the email I used to set up my Apple ID but I do know the password how do I fix this ?
You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105412) -
HI
i restored a sharepoint web 80 application in our test domain
and after when i browse the new web application
it says
Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory.
adilHi adil,
According to your description, my understanding is that you encountered the error “Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file
exists under the layouts directory.” .
The issue happens in
We have customized master page
In the master page, we use path the script/style file like this: <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/coe/mainCOE.css%>"
runat="server"/>
While using the dynamic path in a multiple languages enabled site, language Id(1033 etc) will be added to the path automatically. That cause the file to be not found.
To solve the issue, please download the Arabic language pack http://www.microsoft.com/en-us/download/details.aspx?id=3411 ,
install it on your SharePoint and refresh your browser.
Reference:
http://sharepoint-community.net/profiles/blogs/cannot-make-a-cache-safe-url-for-1036-sytles-themable-corev4-css
Best Regards,
Eric
Eric Tao
TechNet Community Support -
"recover database until cancel" asks for archive log file that do not exist
Hello,
Oracle Release : Oracle 10.2.0.2.0
Last week we performed, a restore and then an Oracle recovery using the recover database until cancel command. (we didn't use backup control files) .It worked fine and we able to restart the SAP instances. However, I still have questions about Oracle behaviour using this command.
First we restored, an online backup.
We tried to restart the database, but got ORA-01113,ORA-01110 errors :
sr3usr.data1 needed media recovery.
Then we performed the recovery :
According Oracel documentation, "recover database until cancel recovery" proceeds by prompting you with the suggested filenames of archived redo log files.
The probleme is it prompts for archive log file that do not exist.
As you can see below, it asked for SMAarch1_10420_610186861.dbf that has never been created. Therefore, I cancelled manually the recovery, and restarted the database. We never got the message "media recovery complete"
ORA-279 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10417_61018686
Fri Sep 7 14:09:45 2007
ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10418_610186861.dbf'
Fri Sep 7 14:09:45 2007
Media Recovery Log /oracle/SMA/oraarch/SMAarch1_10418_610186861.dbf
ORA-279 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10418_61018686
Fri Sep 7 14:10:03 2007
ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10419_610186861.dbf'
Fri Sep 7 14:10:03 2007
Media Recovery Log /oracle/SMA/oraarch/SMAarch1_10419_610186861.dbf
ORA-279 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10419_61018686
Fri Sep 7 14:10:13 2007
ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10420_610186861.dbf'
Fri Sep 7 14:10:13 2007
Media Recovery Log /oracle/SMA/oraarch/SMAarch1_10420_610186861.dbf
Errors with log /oracle/SMA/oraarch/SMAarch1_10420_610186861.dbf
ORA-308 signalled during: ALTER DATABASE RECOVER LOGFILE '/oracle/SMA/oraarch/SMAarch1_10420_61018686
Fri Sep 7 14:15:19 2007
ALTER DATABASE RECOVER CANCEL
Fri Sep 7 14:15:20 2007
ORA-1013 signalled during: ALTER DATABASE RECOVER CANCEL ...
Fri Sep 7 14:15:40 2007
Shutting down instance: further logons disabled
When restaring the database we could see that, a recovery of online redo log has been performed automatically, is it the normal behaviour of a recovery using "recover database until cancel" command ?
Started redo application at
Thread 1: logseq 10416, block 482
Fri Sep 7 14:24:55 2007
Recovery of Online Redo Log: Thread 1 Group 4 Seq 10416 Reading mem 0
Mem# 0 errs 0: /oracle/SMA/origlogB/log_g14m1.dbf
Mem# 1 errs 0: /oracle/SMA/mirrlogB/log_g14m2.dbf
Fri Sep 7 14:24:55 2007
Completed redo application
Fri Sep 7 14:24:55 2007
Completed crash recovery at
Thread 1: logseq 10416, block 525, scn 105140074
0 data blocks read, 0 data blocks written, 43 redo blocks read
Thank you very much for your help.
Frod.Hi,
Let me answer your query.
=======================
Your question: While performing the recovery, is it possible to locate which online redolog is needed, and then to apply the changes in these logs
1. When you have current controlfile and need complete data (no data loss),
then do not go for until cancel recovery.
2. Oracle will apply all the redologs (including current redolog) while recovery
process is on.
3. During the recovery you need to have all the redologs which are listed in the view V$RECOVERY_LOG and all the unarchived and current redolog. By querying V$RECOVERY_LOG you can find out about the redologs required.
4. If the required sequence is not there in the archive destination, and if recovery process asks for that sequence you can query V$LOG to see whether requested sequence is part of the online redologs. If yes you can mention the path of the online redolog to complete the recovery.
Hope this information helps.
Regards,
Madhukar -
On the opening page of Firefox, I am constantly reminded (and sometimes warned) that I do not have the latest version of Firefox. Yet, when I click for upgrade, I start getting a download of the same version 8.0.1 which I am already running.
This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox, I don't think it is being maintained.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same. -
asking for an address and not mine and I am the owner of this device and I can not pave if there is a possibility of me to help me open it with my address as I opened before
Read the following about, "Activation Lock".
http://support.apple.com/kb/ht5818 -
I down load the latest version drag it into applications and then to the dock saying replace the older version and when I open Firefox the next time it says I have the older version.
I have dragged the older version into my trash but it keeps coming back. please advise.Do you see that message on the www.google.com/firefox site?
The www.google.com/firefox site was used in Firefox 3 versions for the home page.<br />
Current Firefox 4+ versions no longer use that Google website as the home page, but use the build-in about:home page as the home page.<br />
Google no longer seems to maintain that page and assumes that you use an older Firefox version if you still visit that site and warns you that you use an older Firefox version and suggests to update.<br />
You can ignore that message if you run the latest Firefox version as reported in the "Help > About" window (Firefox is up to date).<br />
You can use another page as the home page like about:home or www.google.com or www.google.com/ig (iGoogle).<br /> -
I recently performed an across-the-board rename in my LightSwitch application and development database. (No worries, always backups.) I know that directly editing the .lsml files (Client.lsml, Common.lsml, Server.lsml) isn't supported - you must be careful.
That said I've been able to use find and replace within these files with great success for simple refactoring ... until now.
I renamed "WcsNum" on my Job entity to "JobNum".
I have a data grid whose entities include a relationship to "Job" and display a couple of Job's properties, all very typical. Now whenever I open the screen with the data grid and it's populated with one or more entities that have a reference to a
job, I receive this:
The property 'WcsNum' does not exist on type 'LightSwitchApplication.Implementation.Job'. Make sure to only use property names that are defined by the type.
The spooky thing is, the text WcsNum no longer exists anywhere in my entire project. I've used Agent Ransack to search my entire project directory including the main LightSwitch project, my WCF RIA Services project, and any related files.
I've even exported my database schema (and data) to scripts and searched those for it -- nothing.
I've tried "Clean Solution", as well as manually deleting every obj, bin, and GeneratedArtifacts directory in both projects. There are no remaining occurrences of this reference, I don't know where it's getting it from.
I also tried deleting the settings from %UserProfile%\Documents\Microsoft\LightSwitch\Settings, which I regularly clear anyway to discard manual column sizes.
As I'm typing this I'm searching the contents of every file on my entire computer for "WcsNum", in case there's some other local cache that needs cleared. Feasible with a solid state drive.
If I can't find it this way, it must be stored differently, or within a binary format that Agent Ransack doesn't recognize as ANSI/Unicode.For the first question, in Solution Explorer, you'll find a folder under the LightSwitch project called "Data Sources". But here's the bit you might be missing. You have to switch to back to
Logical View, if for some reason you've switched to File View. You won't see the data sources if you're in
File View. And seeing as you've got Luminous Tools installed, if you have made the toolbar visible, then you have a button to do it all for you "Show Data Sources". Then you simply right-click the data source that is your RIA
Service, then select Update Data Source. I hope that makes it a bit clearer for you?
As for not seeing a Rebuild Project command, you might be looking in the actual LightSwitch menu. What I've done is only put commands in there that directly relate to LightSwitch. Any others will appear in one of two groups in the context menu underneath
the LightSwitch menu. Rebuild Solution, Rebuild Project, & Cancel Build, should all be together. If you still can't find it, let me know. Any images of what you're seeing on the screen would be very helpful for me to know what to advise you.
Yann -
LightSwitch Central
Luminous Tools for LightSwitch (a FREE productivity extension)
FREE Themes, Controls, Types and Commands
Please click "Mark as Answer", if any reply answers your question.
Please click "Vote as Helpful", if you find any reply helpful.
By doing this you'll help others to find answers faster. -
Best practise for creating an application that connects to a SQL Server database
I have created an application that connects to a SQL Server database and views information using a datagrid and performs several updates when a button
is selected.
I have created a SQLcontrol.vb using the following code:
Imports System.Data.Sql
Imports System.Data.SqlClient
Public Class SQlControl
'connection 1
Public SQLCon As New SqlConnection With {.ConnectionString
= "Data Source=;Initial Catalog=;Integrated Security=True"}
'connection 2
Public SQLCon1 As New SqlConnection With {.ConnectionString
= "Data Source;Initial Catalog=;Integrated Security=True"}
Public sqlcmd As SqlCommand
Public sqlda As SqlDataAdapter
Public sqldataset As DataSet
Public Function hasconnection() As Boolean
Try
SQLCon.open()
SQLCon.close()
Return True
Catch ex As Exception
MsgBox(ex.Message)
Return False
End Try
End Function
Public Sub runquery(query As String)
Try
SQLCon.Open()
sqlcmd = New SqlCommand(query,
SQLCon)
'LOAD
SQL RECORDS FOR DATAGROD
sqlda = New SqlDataAdapter(sqlcmd)
sqldataset = New DataSet
sqlda.Fill(sqldataset)
BH READ DIRECTLY FROM THE DATABASE
'Dim
R As SqlDataReader = sqlcmd.ExecuteReader
'While
R.Read
'MsgBox(R.GetName(0)
& ": " & R(0))
'End
While
SQLCon.Close()
Catch ex As Exception
MsgBox(ex.Message)
'will
close connection if still open
If SQLCon.State
= ConnectionState.Open Then
SQLCon.Close()
End If
End Try
End Sub
Public Sub runquery1(query As String)
Try
SQLCon1.Open()
sqlcmd = New SqlCommand(query,
SQLCon1)
'LOAD
SQL RECORDS FOR DATAGROD
sqlda = New SqlDataAdapter(sqlcmd)
sqldataset = New DataSet
sqlda.Fill(sqldataset)
BH READ DIRECTLY FROM THE DATABASE
'Dim
R As SqlDataReader = sqlcmd.ExecuteReader
'While
R.Read
'MsgBox(R.GetName(0)
& ": " & R(0))
'End
While
SQLCon1.Close()
Catch ex As Exception
MsgBox(ex.Message)
'will
close connection if still open
If SQLCon1.State
= ConnectionState.Open Then
SQLCon1.Close()
End If
End Try
End Sub
End Class
A code for one of my button which views displays data grid contains the following code:
Private Sub Button1_Click_1(sender As Object,
e As EventArgs) Handles Button1.Click
If SQL.hasconnection
= True Then
SQL.runquery("select
* from tablea")
If SQL.sqldataset.Tables.Count
> 0 Then
DGVData.DataSource = SQL.sqldataset.Tables(0)
End If
End If
End Sub
I am fairly new to vb.net and have read a few books and followed a few tutorials on youtube, what I would like to know is, are there any disadvantages
to the way I have connected to a SQL database using the SQLControl.vb. A lot of the vb books include data adapter and dataset within the form, I'm not sure if I'm following best practice by have the connection details outside of the form.
My other question is, I have created two connections in the SQLControl and call these connections within the same form using the same data adapter
and dataset. It all works fine but I just wanted to know of any potential issues?
Public SQLCon As New SqlConnection With {.ConnectionString
= "Data Source=;Initial Catalog=;Integrated Security=True"}
'connection 2
Public SQLCon1 As New SqlConnection With {.ConnectionString
= "Data Source;Initial Catalog=;Integrated Security=True"}
ThanksMy other question is, I have created two connections in the SQLControl and call these connections within the same form using the same data adapter and dataset. It all works fine but
I just wanted to know of any potential issues
1) You are not using Sepration of concerns for a solution that is doing data access, like using a DAL.
http://en.wikipedia.org/wiki/Separation_of_concerns
2) You are directly issuing SQL commands at the UI, leading to sql injection attacks.
3) You are not using a UI design pattern, which leads you to tightly couple database activity to the UI.
http://www.codeproject.com/Articles/228214/Understanding-Basics-of-UI-Design-Pattern-MVC-MVP
@System243trd, parameters are important to prevent SQL injection attacks (people will insert SQL commands into the database if you do not perform basic checking of what you are passing to the database). If you write a stored procedure try to make
the variables the correct SQL server data type to avoid problems later of people trying to call it directly. Darnold924 is right, I see no code to prevent against SQL injection attacks. In addition, during development in some instances LocalSQLDB
database system is used and during deployment you usually need to use the production SQL server database. Moreover, Linq-to-SQL is used on Windows Phone 8.1 and it is required for phone development later and so I highly recommend learning
it if you plan on developing windows phone applications.
@System243trd, If you want the code for the windows phone app I think it uses the MVVM model or that might be for universal apps or regular windows phone apps. I have been using the windows phone Silverlight pivot or panorama template (it might
be pieces of both). I've already submitted to the windows phone marketplace and it had to go through certification first. I plan on later making an article on it but I need to first fix one or two simple problems I have with it. Here's a link to
the source code if you later want to look at the source code (in vb.net):
https://jeffsblogcodesamples.codeplex.com/downloads/get/1445836
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - Sherlock Holmes. speak softly and carry a big stick - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering - Yoda. Blog
- http://www.computerprofessions.us -
Screen save is looking for a network drive that no longer exists
I am on OS X 10.10.3 (though this issue started with 10.10.2)
When I go to Desktop and ScreenSave preferences I get a message stating 'There was a problem connecting to the server "familyserver"'. This isn't a surprise since that machine is no longer on the network (it was a Windows home server). If I click OK the dialog reappears in a couple of seconds.
In the screen saver preview it says "loading photos.." and for the source it states: "Loading..."
However I can't change the source - the only option in the drop down is "loading"
Anyone know how to fix this so I can change the source to a local drive?
Cheers
IanTry the developers forum. The hosts don't allow us to discuss/troubleshoot beta software in this forum.
-
turn my phone to send Verizon wireless and those instead of the stuff found. I'm not in charge $600 for the for the phone. I'll talk to multiple customer service reps and nothing has really been done about anything other then we'll keep looking or so for stretching it out. since September I've been dealing with thison a month-to-month basis they cut my services they reinstate me and tell me that they're going to knock off the reconnection charge as I have four lines. Unfortunately my main reason for this phone is my work emails which I need to do because I do work and to contact my mother who is 85 years old and I'm the sole caregiver. I don't know what else to do. I have spoken to a supervisor by the name of William or Will oats in that he said he was going to look into it and was going to help me out. Never heard from him again- just original email to quiet me down. I've been sending him emails just about every day trying to make sure that I get my message across. Seems like Verizon Wireless really doesn't care about the long-term customers. Looking forward to hearing from someone that can help me with my plight.process is faulty for returns. You don't accept them in the stores because as one customer service rep stated you can't get your own employees to send the devices back. Now the responsibilities is on the customer the paying customer the one that keeps you alive. And it's not fair that I there's no way I can prove that I put it in the mailbox. So what are my next stepswhat is it that I need to do to clear up this charge of $600. It's about economy as $600 to me at this very point it's a lot of money. I've been your customer for 10 years I've got four lines I've given will my mothers telephone number home number..number but now she's got to sit by the phone to make sure that she picks up all the calls. And nobody can hear what I have to sayand nobody has been able throughout all these months and check your notes check your notes to see how many times I've called how many time you cut my services how many times you reinstated me and how many times that I spent an hour and a half to two hours on the phone going through this process. I think the stress level is to know thqt I did exactly what you asked...I am now paying the price for your faulty process I'm all I'm asking is review my account tell me what I did wrong I follow your procedure so I don't understand....to top it off...my wife hasa per diem job...and she too is affected by loosing out on work leads...
as you can see, the cel is no longer a commodity. It's a way of life.
PLease se call me at -----just remembered....I don't have a service line.I have a similar problem with my fathers service, it wasns't $600 but what is rightfully your money, you deserve it back, I wrote this complaint on the Consumer Affairs website:
In August 2014, my son went to Target to get a new cell phone and was told his Unlimited Data would still be on his plan (he shared a line on his grandfathers account). Well it turned out that Target messed it up and my son immediately called Verizon to get it taken care of but they were not able to do anything about the lost unlimited data but the customer service rep did try to find the best offer for him. In the mean time Verizon was suppose to send him a new cell phone, they never sent it and he was without a phone so he took his business to another cell provider. Verizon DID charge him for the new service that they had spoke about. So when the new bill (Sept) came, the service he never used was on the bill and when we called to inquire about it we spoke to a Judy and told us we would be receiving a credit of the amount that was paid. Well, we got the next months bill (Oct) and still no credit, so called them again and spoke to a Nadine ** . She looked into the account and saw the amount that was paid and said she would submit it again for a credit and she would get back to me in 2 days, no call back.
The next bill (Nov) came and no credit again, call again but didn't get the girls name and she put me on hold to look over the previous conversations. She said she sees in the records about the credit and said it takes a while to get it thru the supervisor authorization and she would put it in as a "rush priority". On Dec. 5th my dad's cell was turned off, so I call yet again to Verizon, and explain the whole story to them again. This girl explained to me that the request was not put in correctly and that she would submit it right this time, they even turned the cell back on for him.
So here we are today, Dec. 30, 2014, I get the bill...NO CREDIT, call up and get a gentleman in billing, explain this whole thing again and he transferred me over to customer service where I spoke to a Jordan and yet again told him the story. By this time I was fuming, 3 almost 4 months of calling for this credit and he looks into the account and tells me there is nothing that states there is a credit so all the other customer service reps see it but now it is gone. He said he can only issue me a $25 credit to the bill, not even close to what the bill was that I paid. At this point I wanted to speak to a Supervisor and even that was a problem.
He did call me back after my phone died. He put me on hold again to speak to a supervisor himself and said that he can only offer me $100 credit for all my troubles for the past few months. I took the $100 credit because Jordan said if I spoke to the supervisor, the $100 credit might not be an offer anymore so it was either take it or leave it. Now where I stand, they get away with NOT giving the credit due to customers. I am done with Verizon.
today being March 12, 2015, he FINALLY got the said $100 credit...but because of their delay, he service was shut off and I refuse to pay the reconnection fee due to their neglect of a customer of over ten years. My father's service will NO longer be with a place that has NO VALUE in customer service....Verizon robs their customers anyway they can.
Maybe you are looking for
-
Report for checks paid to a certain vendor
Is there any report that can give me a list of checks paid to a certain vendor? Thanks
-
Error message when trying to installl an Audigy
I have a problem when trying to install Audigy SE,Error message saying "can't detect a supported product" , my motherboard ASUS P4P800 deluxe has an integrated soundcard /realtek AC97/ and the sound doesn?t work. Waht shall I do, it is umpossible to
-
Acrobat 9.3.2 printing hidden fields automatically
We have a few clients internally running Acrobat Standard 9.0.0 and their documents are printing fine. One user upgraded to 9.3.2, and now when they try and print some of our documents, a hidden field area is automatically printing. I can't seem to f
-
Why don't the new tabs show the "normal" tiles page?
dear mr. or mrs. support, i have recently bought a new laptop. i synced it up with my old one but for some reason whenever i open an empty new tab it opens on a page of the bing searchengine which is something i never asked it to do. i can't change t
-
Computers Showing up twice in the network list even with Smb disabled?
I've just purchased an Airport Express and figured it was time to get the network into shape. I've got 4 macs (MBP, MB, iMac, and PB) and one Windows box. In the sharing list, 2 of the macs show up only once, and 2 of them show up twice. I think I've