Excel stops responding when I see my 3rd or 4th sheets in a file

So, this morning I was doing my homework and I waned to see previous sheets, 3rd and 4th but when I clicked it, Excel stops responding and restarting itself. It had happened for several times.

Backup the workbook first and delete the sheets expect the 3rd, 4rd one. Could you open the workbook/worksheet now? If yes, please copy/paste the content in other sheets from the precious one to avoid the issue happen again.
Try to run Excel in safe mode. (Run "Excel.exe /s") If the hang issue is gone, please disable the suspecious add-ins/macros
Tony Chen
TechNet Community Support

Similar Messages

Safari stops responding when I try to bookmark (and other slow problems!)

Two weeks ago my logicboard died, so I sent my ibook out to Apple for it to be fixed. Ever since I got it back this past Tuesday, my Safari has been extremely slow, but nothing else is wrong with my computer. Here are the problems:
- The biggest issue is that Safari stops responding when I try to make a bookmark. The popup appears to select the bookmark's destination and to enter the name, but when you hit ok, the rainbow wheel comes up and it stops responding, so I have to reset Safari, and now I can't make new bookmarks at all.
- It lags when it tries to open new windows, especially new tabs.
- If a new page loads that scrolls at all, and then I try to scroll down, the wheel appears for several seconds until it can load the rest of the page. It's as though it gets stuck before it can scroll.
- Sometimes when typing, it will also start to lag behind my typing speed, or if I try to click on a new field, it will not immediately allow me to type on occasion.
All these things have never happened before I sent it out. I have reset my cache, and I have tried entering the open DNS addresses in my networks, which has improved loading speed, but hasn't fixed any of these problems. Does anyone have any idea what could be wrong and how I can fix anything?
Message was edited by: canyon to the sky

Try verifying the hard disk.
Boot from your restore disk while holding down the C key until you see the Apple logo, then let go of the C key. You'll see an Installation window, select English. From the Menu Bar, select Utilities/Disk Utility. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click Verify. If DU reports errors, click Repair. If Disk Utility cannot repair the disk you have several options. One is DiskWarrior or
TechToolPro If Disk Utility can repair any errors, go back to the Menu Bar, click Utilities/Startup Disk. In the Startup Disk window select MacintoshHD 10.x.x and click Restart.
If you don't have a restore disk, try booting into Safe Mode
Carolyn

IPad mini stops responding when trying software updatea

IiPad mini stops responding when clicking "agree" when updating software

Close all apps on the iPad, reset the device and then try the update again.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

After I upgraded my Mac with Yosemite, Photoshop Elements 12 stops responding when you use editing tools like eraser, clone stamp.

After I upgraded my Mac with Yosemite, Photoshop Elements 12 Editor stops responding when you use some tools like eraser, clone stamp.

This should help. Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
~ Arpit

Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?

Help. Photoshop CC14 on Mac 5k (2014) running Yosemite 10.10.1. Photoshop stops responding when I'm opening files, saving files or creating new ones. Is anyone suffering the same problem? Does anyone have an answer?

First, go install the MacOS 10.10 updates - you should be on 10.10.2.
I haven't heard of Photoshop not responding during opens and saves. Does it stop responding while the open/save dialogs are visible, or while Photoshop is actually reading or writing files?
10.10.1 did fix a crash in the open/save dialogs, but 10.10.2 still has some odd issues (mostly program errors coming from the OS code) in the open/save dialogs.

Thunderbird stops "responding" when I try to enter a password why? this is new today.

As of this afternoon Thunderbird stops responding when I attempt to enter a password. The accounts have been working for years with thunderbird until today. I can open thunderbird in "safe" mode but that is not useful since plugins are disabled.

I ended up removing v 1.0.1 of "Provider for Google Calendar" plugin; installing v 0.25, then re-setup the Google calendar
These instructions are where I found the different location link to use while setting up the calendar in thunderbird/lightning.
https://sites.google.com/a/tc.columbia.edu/tcapps2/home/how-to/accessing-email-and-calendar-with-thunderbird
The gmail calendar location prior to today was linked to a "googleapi://... .../?calendar=email address... etc." link.
After I added the new gmail calendar to thunderbird the location link is to "https://www.google.com/calendar/feeds/... etc."
Provider for Google Calendar versions:
https://addons.mozilla.org/en-US/thunderbird/addon/provider-for-google-calendar/versions/

After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding, do anyone have any ideas what problem it can be?

After i upgrade to lion and updated logic pro to version 9.1.6 stops responding when loading "Ryu Chords" it stops responding on certain moment, i tried to reinstall freshly and update to version 9.1.5 but problem same so at this moment version is 9.1.6. I tried 64bit too but no changes. And the thing is that i need studio and i need to sort this problem quick.
Please everybody if you had same problem give me answer or any idea what to do
Thanks

The sample rate is not 128 or so, you probably mean the buffer size...
But the performance drop makes sense: switching between a 64 bit process and 32 bit doesn't come free: it cost performance and creates a jitter, which also either shows as performance lost or instability.
You really have to move away from outdated 32 bit AudioUnits, sorry. Ask the vendors to finally release 64 bit versions, it has been several years since 64 bit is available.

ITunes stops responding when I plug in my iPod. I have updated iTunes to latest version, still crashes. OS is Vista.

iTunes stops responding when I plug in my iPod. I have updated iTunes to latest version, still crashes. OS is Vista. How do I fix this?

Hm... Strange.
I had reset the iPhone.
I tried disabling the auto-launch of iPhoto, and...
...when I plugged iPhone in, it started to freeze iTunes, but after a minute or so, the iPhone started synching. I found this odd because I had disabled auto-sync (I press Sync in iTunes when I want to have it Sync).
Now, of course, I do want auto-launch of iPhoto back on, since I like it for when I attach my digital cameras. I hope that when I set it back, it won't re-introduce the problem.
The restart I did may have helped. I resist restarting because my wife's account is often open and she frequently leaves unsaved files up, so it is a pain to respectfully close out her work and then restart.

Programs stop responding when I try to print to PDF

Info on what I'm using:
OS: Windows 7 Home Premium, SP1, 64-bit
Using Adobe Acrobat 8 Professional, version 8.1.0, up to date on updates
In this example, Microsoft Office 2007, no add-ons besides the Adobe Acrobat add-in that allows the creation of a PDF (but happens in all programs)
Problem:
I have always created a PDF from a Word/Excel document by printing to PDF (File --> Print --> Select Adobe PDF as printer --> Hit OK). Generally, the next step that occurs is a dialog box appearing that prompts me to select the location where I want to save the PDF and to specify a file name. Several weeks ago, this process stopped working. Now when I hit "Ok" to print to PDF, no dialog box appears and whatever program I'm in freezes/stops responding. Aside: I have tried printing to PDF from several other programs to see if the problem occurs in those as well, and it does -- printing to PDF freezes whatever program I am attempting to print from. (For example, MS Paint, Internet Explorer, Firefox, even Notepad)
Bullet point summary of what I have tried:
Canceling the print jobs in the Adobe PDF printer under "Devices and Printers" (jobs say they are canceling but never clear from the print queue unless I go into Services and restart my print spooler) and reprinting (freezes again)
Restarting computer (had no effect)
Setting Adobe PDF as my default printer (had no effect)
Setting TrueType font as "Native TrueType" under the Adobe PDF printer properties (Layout --> Advanced --> PostScript Options) (suggested in another thread I read about this problem; had no effect)
Checking to make sure that Word had not "adjusted" the security settings for the Adobe add-in (disabling it) under the Trust Center (Adobe add-in was still enabled, so nothing to change there)
Changing the printer properties to print directly to the printer rather than spooling first (had no effect)
Saving as PDF using File --> Save As --> Selecting PDF as file type (does work and is an acceptable substitute except when I need to convert multiple files to PDF at once and don't have time to go in to each individual file and convert it separately)
Repairing the Acrobat installation from within Adobe or from the Programs and Features menu under the Control Panel (does work, did fix the problem; but see followup below).
Repairing the Acrobat installation worked when I did it a few weeks ago. Once I went through the process, I attempted to print a document to PDF and it worked. But this morning when I attempted to print another document to PDF, it froze Word again and has been doing that ever since, so it does not seem to be a permanent fix. I had succesfully printed several documents to PDF this morning before it stopped working; the document I printed to PDF immediately before the document that froze was the exact same as the document froze in every way except the actual text (formatting, document objects, etc.). So I don't think it was something in the content of the document that "broke" the Adobe PDF printer.
I am sure I can try repairing the Adobe installation again, but I really do not want to have to do that all of the time. Does anyone know what the problem is? I haven't found anything that explains what's going on.

Anyone?

Firefox stops responding when scroling down on youtube.

when i go to youtube and don't scroll down everthings find but if do there a 60% chance that it will stop responding and crash. and i have uninstalled and refreshed firefox and no changes am getting to the point of leaving firefox if i can't fix it

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

ITunes stops responding when casting to appleTV

I am trying to cast media from my iTunes on a windows 7 sony vaio notebook to my appleTV but when I click the airplay symbol it simply stops responding. The same happens if I enable home sharing, it imediatly stops responding.
I have tried casting different types of media (i.e. music, videos), disabled windows firewall and disabled anti virus software all with the same result. I have uninstalled and reinstalled iTunes, still not responding when trying to cast. I Also tried an earlier version of iTunes (10.5) and the problem persisted.
I have tested the appleTV with my macbook pro and it worked fine both casting iTunes media as well as screen mirroring. I have also tested it with a desktop running windows 7 and an android phone running allcast, both also worked fine.
The vaio specs are:
intel core i7-2630QM 2.00GHz
8 GB RAM
windows 7 home premium 64 bits
iTunes is updated (11.1.5) as well as quick time (7.7.5).
the appleTV is brand new and came with software version 6.0.2, however I have also tested with another appleTV and obtained the same result(not responding).
Any ideas?

It happens with my iPhone 4S and iPad 2 as well without encrypted backups. Anyone see this behavior or know how to fix? I removed all Apple software and reinstalled and the backup worked once, now back to the "iTunes has stopped working" error.

ARD 3 stops responding when scanning across subnets

I am running into he same issue over and over... an
Occasionally (although it seems to happen more and more as time goes on) a scan will look like it is running but will fail to find anything. If I try to stop the scan it ignores the command, I will then get the spinning beach ball and ARD stops responding. This happens while scanning on or multiple subnets. I am running the admin console on an Intel iMac and a G5 Xserver. I've re-installed ARD twice (not a quick process) will no luck. I am running 10.4.6 fully patched.
The failure to scan seems tied to an issue where an established list will fail to "see" any systems on it... I've been deleting and rebuilding the list manually to get around this but with limited success. I am inclined to blame my network as there are some oddities in how it handles cross subnet traffic as well as severe reverse DNS issues....
has anyone else seen this behavior?

Problems scanning where adding a workstation manually works would indeed seem to be an issue with the routing between your subnets. My guess, and this is just a guess at this point, is that your routers are blocking the scan (this may be deliberate on the part of the network admins as a security measure) and that ARD is taking a long time to time out waiting for replies.
The lockup when you try to cancel is a bit of a puzzle, though. A few questions:
- does it happen on both your admin systems, or just one and if so which?
- are the two admin stations on the same subnet, or on different subnets?
- when you reinstalled ARD, did you go through the full uninstall process?

Firefox 13.0.1 stops responding when removing cookies on my MacBook Air

Firefox 13.0.1 stops responding and I have to force it to quit when I try to clear cookies on my MacBook Air using
Tools->Clear Recent History->cookies selected
Preferences->Privacy->Clear Recent History when Firefox Closes->cookies selected
In either case, if I do not select cookies I have no problem.
Preferences->Privacy->Show Cookies->Remove All cookie has no problem.
I can recover simply by forcing Firefox to quit then restarting Firefox. I then deselect cookies in both cases and Firefox acts normally.
I do not have this problem on my MacBook Pro. Both the Pro and Air have been rebuilt from erased discs within the last several weeks.
This is similar to the thread "Firefox Stops Responding After Adobe Flash 11.3.300.262 Installed" (should be .257)" but in this case I do not access a flash site, FlashBlock is installed, and Flash is disabled. The recovery from this problem is very intrusive since I have to delete every file that says "Firefox" and reinstall Firefox.
https://support.mozilla.org/en-US/questions/930683
** Reference Environment without problems that I know about
MacBook Pro 15" (late 2011 series, purchased 1/31/2012)
OS rebuilt from erased disc 6/14/2012
OS X 10.7.4 (11E53)
Java for OS X 2012-004 v 1.0
Airport Utility 6.1
Safari 5.1.7
Flashback malware removal tool v 1.0
iTunes 10.6.3
Mac OS X Update Combined OS X 10.7.4
AmazonMP3 Downloader 1.0.16
Flip4mac Media Plugin 2.4.4.2
Java Applet Plugin 14.3.0
Quicktime Plugin 7.7.1
Shockwave Flash 11.3.300.257
Shockwave director 11.6.3r33
Silverlight 5.1.104.11.0
** New Environment where Firefox stops responding
MacBook Air 13" (mid 2012 series, purchased 6/12/2012)
(I've only included the deltas from the MacBook Pro)
OS rebuilt from erased disc 6/24/2012
OS X 10.7.4 (11E2705)
->MacBook Air (mid2012) Software Update 1.0 (seems to be the most significant change)
Flash Block 1.5.15.1 enable
Shockwave Flash 11.3.300.257 disabled
Shockwave director 11.5.9r620 disabled (different level, but disabled)

Curiouser and curiouser.
I have tried the new Flash on my MacBook Pro using Firefox 13.0.1 at the same USA Today Crossword site, puzzle 6/25/2012 and I do ''' not''' have this problem.
The variations I see are
* I used the same DMG to put Adobe Flash on both machines and they are both at 11.3.300.257, 11.3 r300
* I used the same DMG to put Firefox 13.0.1 on both machines
* The MacBook Pro is 15" (late 2011) OS X 10.7.4 build 11E53
* The MacBook Air is 13" (June 2012) OS X 10.7.4 build 11E2705
* Both are the latest available OS X levels for their respective platforms.
* Both platforms have been built from erased discs and Apple recovery discs within the last few weeks. (The Air was rebuilt yesterday, 6/24).
* The OS X 10.7.4 software is at different build levels and additional software has been installed to support the Air.
* I have Shockwave Director 11.6.3r633 installed on the MacBook Pro
My findings:
* On the MacBook Pro, Firefox at the specified Flash site work as advertised
* On the MacBook Air, Firefox at the same flash site stops respondings and must be force quit.
Open questions:
* Must I have Shockwave Director also installed?
* Does the OS X software build level have an effect of some sort?
* Does the model series of the MacBooks - late 2011 and June 2012 - affect the problem. The Air has only been available in the within the last few weeks and I ordered it the day it became available.
Does the pointing circle become "shift one left" or "shift one right"?

AuthorWare stops responding when loading a mpg file

I have a new Dell T3500 with Windows XP (32-bit). Other people in the office are able to load .mpg files into their AuthorWare project but every time I try, Authorware stops responding. I am using AuthorWare 7.02.
If I change the file extensions to .wmv, AuthorWare has not problem importing them. Windows media player has no problem playing the .mpgs.
I have uninstalled and reinstalled the software and the update. I have tried this in brand new project files. I'm not sure what to do next.
Does anyone have any idea why this is happening.
Sincerley,
Katie Roberts

Unfortunately, I am required to use the .mpg extension when it is delivered to our client.
The videos import and play correctly as .wmv files.
Then it may actually be a CODEC issue
Try installing this codec pack:
http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=73c47878-20d0-4c1a -96f4-177d7e0074b7
You may need it, because Microsoft changed the default CODECs installed from Windows Media Player 8 onwards. Certain Dell machines seem to have problems with this.
If that doesn't work, you may find alternatives to try here:
http://www.microsoft.com/downloads/en/results.aspx?pocId=&freetext=codec&DisplayLang=en
If that still doesn't work, let me know and I'll see if I remember something else you should try.
Steve

Lightroom 5.7.1 stops responding when trying to import photos from iPhone.

As the title says, when trying to import the photos from my phone which I've done with Lightroom for a couple years now, the program stops responding entirely. This happens with both mine and my wife's phones. We did leave hers plugged in over night and it eventually started responding again and I was able to import her photos. But I can account for at least 5 hours during which it was not responding first. I'm not sure what changed over night that finally let it work again.
Any ideas? Thanks!

You're sure you want to stop using iphoto? Then I would try it this way instead:
Export each event in your iphoto library separately, put the photos where you want to keep them and use "from files and folders". If there's an event that the organizer chokes on, then you'll have to go into that one photo by photo to see where the problem lies. (You are aware that using "from iphoto" is duplicating your entire iphoto library, so you don't want to do that AND keep using iphoto, right?)

Excel stops responding when I see my 3rd or 4th sheets in a file

Similar Messages

Maybe you are looking for