Excel unable to read WEBI schedule download excel file

Hi experts,
We use BO central management's instance manager to schedule download a report as excel format in our ftp share folder.
And the download did run successfully and an icon of the file been shown as excel format in ftp folder.
while we use excel 2007 to open the file, excel pop out the message of unable to read the file.
it is saying the excel found unreadbale content in report. Do you want to recover the contens of this workbook? if you trust the source of this workbook, click yes. after applied the yes, excel stil pop out the message of unable to read the file.
the general tab in excel been uncheck the "ignore other applications that use Dynamic Data Exchange (DDE), but result still shown unable to read.
The whole set of report can be run in WEBI and using save report to my computer as excel without any issues.
WEBI been setup as refresh on open.
Any clues?

Hi,
Did you create a PivotTable report in the file? As your description, the HTML format could be used correctly in Excel 2007. Did you get the other error message?
Such as,Unable to read file.
When you click OK, you receive the following error message:
Errors were detected in '<var>filename</var>.xls', but Microsoft Excel was able to open the file by making the repairs listed below. Save the file to make these repairs permanent.
PivotTable report '<var>report_name</var>' on '[<var>filename</var>.xls]worksheet_name' was discarded due to integrity problems.
Please try to use the workaround:
Turn off AutoRecovery when you work with any workbooks.Click Excel button>Excel options>Save>Uncheck AutoRecovery
Following this, if the issue exists, I recommend you fix the issue the following KB：
http://support.microsoft.com/kb/943088
http://support.microsoft.com/kb/929766
Regards,
George Zhao
TechNet Community Support

Similar Messages

ORA-27047: unable to read the header block of file

My Windows 2003 crashed which was running Oracle XE.
I installed Oracle XE on Windows XP on another machine.
I coped my D:\oracle\XE10g\oradata folder of Win2003 to the same location in WinXP machine.
When I start the database in WinXP using SQLPLUS i get the following message
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size 1286220 bytes
Variable Size 62918580 bytes
Database Buffers 79691776 bytes
Redo Buffers 2904064 bytes
ORA-00205: error in identifying control file, check alert log for more info
I my D:\oracle\XE10g\app\oracle\admin\XE\bdump\alert_xe I found following errors
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Wed Apr 25 18:38:36 2007
ALTER DATABASE MOUNT
Wed Apr 25 18:38:36 2007
ORA-00202: control file: 'D:\ORACLE\XE10G\ORADATA\XE\CONTROL.DBF'
ORA-27047: unable to read the header block of file
OSD-04001: invalid logical block size (OS 2800189884)
Wed Apr 25 18:38:36 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
ORA-00202: control file: 'D:\ORACLE\XE10G\ORADATA\XE\CONTROL.DBF'
ORA-27047: unable to read the header block of file
OSD-04001: invalid logical block size (OS 2800189884)
Please help.
Regards,
Zulqarnain

Try to install win 2003 server software, do the fresh installation of oracle software, now copy the datafiles and controlfiles to same locations as you did on winxp.
get back to us, if still not out of the woods. I still doubt that a simple restore would do the trick, since you doing it across different platforms, might be I can be wrong, but this is what I personally feel, you not able to start the database on winxp.
hare krishna
Alok

Adobe reader will not download my files that it has been previously downloading with no trouble.

Adobe reader will not download my files that it has been previously downloading with no trouble.

Your statement is so vague that I have no idea what you are trying to do, or what goes wrong. Please provide some details!

Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)

Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)
What can I do?

Run the cleaner tool and install from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Unable to read web mail with talktalk but can with internet explorer

I updated to fire fox 4 and since I am unable to read my web mail from my talk talk account. When I try to get into my inbox it tells me I have undefined new mail. I can access my email with internet explorer but not firefox.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Terminal Error: Unable to read "/private/etc/cups/cups-files.conf" due to errors.

After finding out that my Kodak ESP C310 printer was no longer printing after installing OS X Yosemite, I tried entering these into the terminal to get the driver working again.
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
sudo launchctl stop org.cups.cupsd
Nothing happened the first time I tried it, so I tried it again with still no luck. Now within seconds of opening the terminal I get this message :
" /private/etc/cups/cups-files.conf"
It pops up every few seconds, so it is practically impossible for me to type anything into the terminal without it popping up right in the middle. I tried the fix from the other discussion on this issue, and that didn't work. also I'm noticing that my printer isn't even added under "printers and scanners" anymore. I tried to re-add it, but I cannot without a driver that functions with 10.10.1
Any suggestions on how I should deal with this?

The permissions and ownership on /private/etc/cups/cups-files.conf should be:
/bin/ls -leO@ /private/etc/cups/cups-files.conf
-rw-r--r-- 1 root _lp compressed 3297 Mar 8 2014 /private/etc/cups/cups-files.conf
See "man cups-files" for the format of the cups-files.conf file
The contents of the /private/etc/cups/cups-files.conf file should look like:
# "$Id: cups-files.conf.in 11203 2013-07-26 21:32:33Z msweet $"
# Sample file/directory/user/group configuration file for the CUPS scheduler.
# See "man cups-files.conf" for a complete description of this file.
# List of events that are considered fatal errors for the scheduler...
#FatalErrors config
# Do we call fsync() after writing configuration or status files?
#SyncOnClose No
# Default user and group for filters/backends/helper programs; this cannot be
# any user or group that resolves to ID 0 for security reasons...
#User _lp
#Group _lp
# Administrator user group, used to match @SYSTEM in cupsd.conf policy rules...
SystemGroup admin
SystemGroupAuthKey system.print.admin
# User that is substituted for unauthenticated (remote) root accesses...
#RemoteRoot remroot
# Do we allow file: device URIs other than to /dev/null?
#FileDevice No
# Permissions for configuration and log files...
#ConfigFilePerm 0644
#LogFilePerm 0644
# Location of the file logging all access to the scheduler; may be the name
# "syslog". If not an absolute path, the value of ServerRoot is used as the
# root directory. Also see the "AccessLogLevel" directive in cupsd.conf.
AccessLog /private/var/log/cups/access_log
# Location of cache files used by the scheduler...
#CacheDir /private/var/spool/cups/cache
# Location of data files used by the scheduler...
#DataDir /usr/share/cups
# Location of the static web content served by the scheduler...
#DocumentRoot /usr/share/doc/cups
# Location of the file logging all messages produced by the scheduler and any
# helper programs; may be the name "syslog". If not an absolute path, the value
# of ServerRoot is used as the root directory. Also see the "LogLevel"
# directive in cupsd.conf.
ErrorLog /private/var/log/cups/error_log
# Location of fonts used by older print filters...
#FontPath /usr/share/cups/fonts
# Location of LPD configuration
#LPDConfigFile launchd:///System/Library/LaunchDaemons/org.cups.cups-lpd.plist
# Location of the file logging all pages printed by the scheduler and any
# helper programs; may be the name "syslog". If not an absolute path, the value
# of ServerRoot is used as the root directory. Also see the "PageLogFormat"
# directive in cupsd.conf.
PageLog /private/var/log/cups/page_log
# Location of the file listing all of the local printers...
#Printcap /Library/Preferences/org.cups.printers.plist
# Format of the Printcap file...
#PrintcapFormat bsd
#PrintcapFormat plist
#PrintcapFormat solaris
# Location of all spool files...
#RequestRoot /private/var/spool/cups
# Location of helper programs...
#ServerBin /usr/libexec/cups
# SSL/TLS certificate for the scheduler...
#ServerCertificate /Library/Keychains/System.keychain
# SSL/TLS private key for the scheduler...
#ServerKey
# Location of other configuration files...
#ServerRoot /private/etc/cups
# Location of Samba configuration file...
#SMBConfigFile
# Location of scheduler state files...
#StateDir /private/etc/cups
# Location of scheduler/helper temporary files. This directory is emptied on
# scheduler startup and cannot be one of the standard (public) temporary
# directory locations for security reasons...
#TempDir /private/var/spool/cups/tmp
# End of "$Id: cups-files.conf.in 11203 2013-07-26 21:32:33Z msweet $".

Web dynpro - Download desktop file

Hi guys,
How to download desktop file data into application server in the Web dynpro application?
Thanks.

Hi,
FORM error_file .
DATA: l_msg(80) TYPE c,
         l_name1(100) TYPE c,
         l_ext1(5)    TYPE c,
         l_file1(300) TYPE c.
CLEAR : l_msg,
          l_name1,
          l_ext1,
          l_file1.
MOVE p_file TO w_file.
*--- text-305 for '\in\'
IF w_file CS text-305.
*&---Create log file to keep old & new characteristic values
    CLEAR w_error_file.
    CLEAR wa_error.
    SPLIT w_file AT c_dot INTO l_name1 l_ext1.
    CONCATENATE l_name1 sy-datum sy-uzeit c_dot l_ext1 INTO l_file1.
    MOVE l_file1 TO w_error_file.
*---text-305 for '\in\' & text-319 for '\error\'
    REPLACE text-305 IN w_error_file WITH text-319 IGNORING CASE.
    CONDENSE w_error_file NO-GAPS.
*---to set txt format
*---text-320   for 'csv'   & text-321   for 'txt'
    REPLACE text-320 IN w_error_file WITH text-321 IGNORING CASE .
ENDIF.
CLEAR w_count.
DESCRIBE TABLE it_error LINES w_count.
IF NOT w_count IS INITIAL.
    OPEN DATASET w_error_file
                 FOR OUTPUT IN TEXT MODE
                 ENCODING DEFAULT.    IF sy-subrc 0.
      WRITE:/ 'Error in opening file'.
    ELSE.
      wa_error-vbeln   = 'Order'.
      wa_error-posnr   = 'Item'.
      wa_error-matnr   = 'Material'.
      wa_error-error   = 'Error Description'.
      TRANSFER wa_error TO w_error_file.
      MOVE: sy-uline(200)
          TO wa_error.
      TRANSFER wa_error TO w_error_file.
      MOVE: '   '
            TO wa_error.
      TRANSFER wa_error TO w_error_file.
      LOOP AT it_error.
        CLEAR wa_error.
        wa_error-vbeln   = it_error-vbeln.
        wa_error-posnr   = it_error-posnr.
        wa_error-matnr   = it_error-matnr.
        wa_error-error   = it_error-error.
        TRANSFER wa_error TO w_error_file.
      ENDLOOP.*---text-317 for 'Error file saved successfully to :'
      CONCATENATE text-317 w_error_file INTO l_msg SEPARATED BY space.
     MESSAGE l_msg TYPE c_s. "Comment KC 10 Dec 08
*>>BC KC 10 Dec 08
*---pop up error message
      PERFORM popup_inform USING l_msg.
*<<EC 10 Dec 08
    ENDIF.
ENDIF.
IF w_error_file IS NOT INITIAL.
    CLOSE DATASET w_error_file..
Delete dataset w_error_file.   u201Cto delete file from AS
ENDIF.
ENDFORM.                    " ERROR_FILE
Regards
Md.MahaboobKhan

Unable to open a saved/ downloaded pdf file

Hi
I get the following error when trying to open pdf file that was downloaded and saved through a java program.
Adobe Reader could not open 'export.pdf' because it is either not a supported file type or because the file has been damaged. (for eg. it was sent as email attachment and was not correctly decoded.
Any solution or suggestion to this error will be greatly appreciated.
Thanks in advance
Revathi

Since you don't tell us anything about your code, we can only guess.
Here are common solutions:
- Don't use any of those types when handling your data: char, char[], String, Reader, Writer.
- Make sure that you really understand what read(byte[]) does and when it returns. (Hint: when ignore its return value or call it outside a loop, then you don't understand it).

Java App on Linux : Unable to read iso-8859-1 encoded file correctly.

I have a file which is encoded as iso-8859-1, and contains characters such as ô .
I am reading this file with java code, something like:
File in = new File("myfile.csv");
InputStream fr = new FileInputStream(in);
byte[] buffer = new byte[4096];
while (true) {
int byteCount = fr.read(buffer, 0, buffer.length);
if (byteCount <= 0) {
break;
String s = new String(buffer, 0, byteCount,"ISO-8859-1");
System.out.println(s);
However the ô character is always garbled, usually printing as a ? .
I am running this on a Linux machine. It works fine on my XP machine.
I have verified that I can see the correct characters when I cat the file on the terminal.
(Interestingly, but I think maybe only by co-incidence, it works when I run with the -Dfile.encoding=UTF16 option, but not with UTF8, although this appears a hack rather than a fix since this option was not intended for developer use by sun - but I thought mentioning it may provide some clues as to what is going on)

I think your main probelm is with the console. When you send text to the console, it's sent in the system default encoding. On an English-locale system that might be ASCII, ISO-8859-1, windows-1252, UTF-8, MacRoman, and probably several other possibilities. Then the console decodes the the bytes using whatever encoding it feels like using--on my WinXP machine, it uses cp437 by default (just for laughs, as far as I can tell). If the text happens to be pure, seven-bit ASCII, there's no problem, since all those encodings are identical in that range.
But if you need to output anything other than ASCII characters, avoid the console. Send the output to a file and specify an encoding that you know will be able to handle your characters--UTF-8 can handle anything. Then open the file with an editor that can read that encoding; most of them can handle UTF-8 these days, and many will even detect it automatically. You also need to be using a font that can display your characters.
However, you're also going about the reading part wrong. Instead of reading the text in as bytes and passing them to a String constructor, you should use an InputStreamReader and read it as text from the beginning: BufferedReader br = new BufferedReader(
new InputStreamReader(
new FileInputStream("myfile.csv"), "ISO-8859-1"));I am curious about your statement that "it works" when you run with the -Dfile.encoding=UTF16 option. I wouldn't be surprised to see it output the correct characters (ASCII characters, anyway), but I would expect to see the characters interspersed with blank spaces or rectangles.

4.1 rc1 - unable to read monochrome Sigma DP X3F files

Sigma DP2s
LR 4.1 rc1
I import .X3F files to LR catalogue from SD card via card reader.
LR reads and allows me to edit these OK
If I then edit the .X3F files using Sigma Photo Pro v5.1, and change WB to "Monochrome", then save the modification to the raw file (in SPP5.1), and then attempt to look at it in LR in the develop module, I get the error "There was a problem working with the file"..
Followed by "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to the photo."
I have tried this a number of times with different X3F image files with the same result.
I have tried (separately) synchronizing, deleting and re-importing the file with the same result.
LR3 worked perfectly in this regard - if a .X3F file was imported, then changed using SPP5.1 to mono, the effect would be immediately seen in LR without errors.
NB If I then set the WB back from monochrome in SPP5.1, LR is able to work with theimage file again with noerrors.
I have also encountered similar error messages when trying to export jpgs from edited .tiff files created using a film scanner, which may be related. When or if I can reproduce that I will start a separate thread.

Lightroom is raw conversion software and once your camera is supported it will be able to process the raw data. However if you use other raw conversion software to process the raw data or partially process the raw file you have altered the raw file and Lightroom will no longer be able to process. With raw data you can only choose one chef.

Terminal: unable to read "/private/etc/cups/cups-files.conf" due to errors

Terminal is giving me the message above every 10 seconds making it impossible to write any lines without the error message breaking up the line. Any suggestions on how to resolve this issue?

Back up all data.
Select
Shell ▹ New Command
from the Terminal menu bar. Uncheck the box marked
Run command inside a shell
if checked.
Copy and paste the following line into the text box that opens, then press return:
mkdir disabled_shell_files
Close the Terminal window that opens. Repeat with this line:
mv .profile .bash_history .bash_profile .bashrc .inputrc disabled_shell_files
Your old shell initialization and history files will be saved in a directory named "disabled_shell_files" at the top level of your home directory. It's normal that some of these files will not exist, and therefore you will get some "no such file" errors.
Close the window, open a new one, and test.

How can i read the data from attached file?

using javamail i receiving a mail with attachment
but unable to read the content of the file
Plz help me out
thanks in advance

The answer is in the JavaMail FAQ.

Can an iPod download all files?

I'm considering buying an iPod touch. I need it to have a full functioning browser that can surf the web and download all file types and temporarily store them on the iPod's storage and then by virtue of connecting it to a computer off-load said files to that computer. PDA functions are more important than music and video though active streaming is cool.
Oh, and obviouly it must be fully WiFi capable.
Does the iPod do this?
Or maybe the iPhone does this (WiFi or via phone service)?

Tech specs for iPod Touch. http://store.apple.com/us/browse/home/shopipod/family/ipodtouch?mco=MTIxMTE Yes, Wi-Fi.
and iPhone 3G. http://store.apple.com/us/browse/home/shop_iphone/family/iphone?mco=MTE2NTQ
Tech specs on iPhone 3G indicate Wi-Fi (802.11b/g).
Using iPod as a Storage Device
Carolyn

I have a mac osx 10.411G4 powre pc and recently I down loaded excel for mac 2004 the problem that iam having is that the two other programs i downloaded one program it says unable to read the dictionary of the application of the extension because it is no

I have a mac osx 10.411 power pc and recently i downloaded excel for mac 2004 so that i could download some program that only would work if i have excel for mac but what happen was it went to script and said that unable to read the dictionary of the application of the extension because it is not scriptable and the second pop up said the document autorun,inf could not open script editor can not open files in script editor app can any one help me how do i get these program working thank you norro460

good afternoon Limnos i think i didnt give the right info I didnt download well in a way i did i bought a copy of microsoft excel for mac 2004 i loaded on to my mac then i went and down loaded some software that said i needed to have excel you see my mac is osx 10.4,11 power pc G4 and that is were i had the problem now the excell loaded allright but the the other programs did not the pop ups say it is not scriptable or can not read dictionary if you can help m,e iam not great with computers but i along

"Unable to read file" error in Excel 2010 when downloading .xls file from IE11

We have lots of reports that have links for our users to be able to download report results in Excel format. We accomplish this by using the Excel mime type in our .asp pages. Sporadically, we are seeing "Unable to read file" errors in Excel 2010
after choosing Open from the IE11 save dialog. Choosing Save/Save As and the file will open just fine.
Also, we can sometimes cause the error to occur more frequently by switching windows during the time when the file is downloading.
If the file is opened directly from /Temporary Internet Files then it opens just fine.
Window 7 64-bit
Thanks in advance!

Hi,
I found you replied in a similar thread, did you try the workaround (Reset the IE) that provided there? Did you change a browser to test?
Then, I suggest we use Process Monitor to do further troubleshooting. Please collect all the actions of IE.exe and Excel.exe, and check the if there are some
error message/code during you open XLS file from IE 11.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Excel unable to read WEBI schedule download excel file

Similar Messages

Maybe you are looking for