Excel will not save changes to chart axis

I have many charts that I change the logarithmic y axis scale to fixed values. In Excel 2010 when I save the file and then re-open it the axis scale reverts back to automatic and I have to re-adjust them. Has anyone else experienced this?
Is there something I am missing? I tried to report a bug but could not find a way and I can't affort any more time to that effort.
Thanks for any assistance.

This is very strange,does this issue occurs on all workbook or just the specified one?
After you save the workbook and then reopen it , check the axis scale, the "Auto" options has already been checked?
Also when you said 'I change the logarithmic y axis scale to fixed values', you mean you use the Logarithmic scale?
If you use the Logarithmic scale,I don't think you need to set up the MAX and MIN value.
http://blogs.mccombs.utexas.edu/the-most/2010/08/20/log-scale/

Similar Messages

Muse 2014 will not save changes.

Muse 2014 will not save changes. Just freezes when asked to save. Cannot do a save as either. However, can still work on file… but unable to save. Very frustrating losing work and wasting time! Any thoughts would be welcomed.

Zak,
Thank you for the speedy reply. I have been having issues since Saturday. Works sometimes and then not. Restarting computer sometimes works… but a pain in the butt to do! Is starting to drive me crazy.
Also when I try to quit Muse, well it stays open… sort of. Image is on screen, but not functional. Weird, to say the least.
Attached is a files. I did open it earlier today and managed to do some work and save it. Now nothing after a few hours of work and thought was being saved as I did “command S” very frequently. It is very, very frustrating and brings me back some 25 years ago when crashes were expected and common. Today, not so much! I am not a rookie and would like to know what the issues are asap… if possible.
Many thanks for your help.
Paul
Paul D. Heaslip BES, RGD
Third Wave Creative | Cambridge, ON Canada
studio: 519.260.2603 | mobile: 647.407.5067
www.thirdwave2.ca

Reader 8.1.2 in Vista will not save changes

When trying to save changes a message appears to the effect that I need to have Reader 8 installed in order to save changes. Well, I have 8.1.2 installed but the changed pdf (I rotated the image clockwise) will not save.

>a message appears to the effect that I need to have Reader 8 installed in order to save changes
Are you sure that's "exactly" what the message said?
Reader can't save any changes. Also, you are only temporarily rotating the document view with that option but not actually rotating the document.

In iOS 4, you could make separate photo slide shows with separate songs. In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show. Is there any way to fix this? This is something I

In iOS 4, you could make separate photo slide shows with separate songs.
In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
Is there any way to fix this? This is something I use every day.
I am on an iPad 2, 32gb, wifi...
Thank you

My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

HT2500 without changing settings, iMac mail V4.6, 1)will not save password 2)takes accounts offline 3)will not except password 4)will not send mail from accounts every time.     What happen?

without changing settings, iMac mail V4.6, 1)will not save password   2)takes accounts offline 3)will not except password   4)will not send mail from accounts every time.
    What happen? How do I correct this?

Hi Nuch1,
I found an article that is contains very thorough Mail troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
You can use that article to figure out what part of the email "ecosystem" is the cause of the issue, and it can also help you attempt to resolve it.
Hope that helps,
David

Elements 12 will not save size changes.

I have done hundreds of size changes in previous versions but cannot get Elements 12 to save the size changes. A friend has the same problem with the new Elements 12. Any hints/suggestions will be greatly appreciated.

It's better not to keep starting new threads on the same topic:
Photoshop Elements 12 will not save my size changes.

Photoshop CS6 - Batch function will not save files

OK, I have used the "Automate/Batch" function well over a hundred times, so this situation (first time using it in CS6) is VERY frustrating!
Running Adobe CS6 extended v. 13.0.1 x32 on a Win XP sp3 OS.
I have a slew of photos that need nothing done except to resize from the native file size to 6 in x 4 in @ 150 ppi and save into a new folder (to not override the original). I have recorded the action multiple times now and each time I run the action, the files do not save! Here are the various parameters I've used:
Attempt #1:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
      Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
NO checkmarks next to any options
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #1 - DID NOT SAVE FILES
Attempt #2:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
     Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Cehckmark override Action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #2 - DID NOT SAVE FILES
Attempt #3:
     Action Steps Recorded -
Open
Save for web (set size parameters here)
Close
      Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
Checkmark override action "Save As" commands
Did not change file naming parameters
Result #3- DID NOT SAVE FILES
Attempt #4:
     Action Steps Recorded -
Open
Image Size (set parameters here)
Save as (set folder location here)
Close
     Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override Action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
NO checkmark on override action
Did not change file naming parameters
Result #4- DID NOT SAVE FILES
Attempt #5:
     Action Steps Recorded -
Open
Image Size (set parameters here)
Save as (set folder location here)
Close
       Batch settings -
Play Set: correct folder selected; Action: correct action selected
Source: folder - selected folder where native files are located (on desktop)
Checkmark override action "Open" commands
Destination: folder - selected folder where small files should be saved (on desktop)
Checkmark override action "Save As" commands
Did not change file naming parameters
Result #5- DID NOT SAVE FILES
Please help! This has never been a problem before CS6 and I truly am at my wits end trying to figure out why the files will not save. I have several hundred files that I need to run this on, so doing it individually is not an option.
Thanks in advance for any and all insights!

I'm having a problem with Automating > Batch as well. Strange enough, I did a batch of other photos and it worked fine. Selecting a new set of folders is not working at all; the files simply pop open and then close but the destination folder remains empty. It also doesn't appear the actions are occuring since I don't see them highlighting as the automation runs. I have no idea why it would work then not. BTW, "Override Action "Save As" is unchecked.
~CG
UPDATE: I put a "save as" command at the beginning of the action, then checked the "Override Action "Save As" box and it somehow works now, but not before stalling on an image (normally the last in the folder) and complaining that the image was being used in another program. The only other program opened was Bridge so I'm unsure why it had a problem. I closed both programs and ran the automation with nothing else opened and it worked ... ?? Confused, but not complaining (for now).

Firefox will not save Site Certificate Exceptions even when checked to do so.

I have a publicly free Wifi Access point near by that I use daily. When logging on to this site I get a Warning about the Sites Certificate and do I want to proceed, I choose YES and then are asked if I want to make this exception permanent and I put a check mark in the box for yes and press accept. This is suppose to permanently accept this websites certificate in the future. It does not.. It will not save the exception from one session to the next.
IN SHORT: Firefox failure to permanently store website Certificate exceptions.

Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/Username+and+password+not+remembered
*Tools > Options > Security: Passwords: "Remember passwords for sites"

Adobe Reader will not save or show the Save dialog

Hello, we use adobe reader a lot where I work, mostly with filling out pre-made "Form" type PDF's and saving them in customer folders on the server, as of last friday my adobe reader will not allow me to save pdf's, I have attempted to edit and save, edit and save-as, I tried simply saving as without making any edits. I also tried to open a PDF online (specifically http://www.ncu.edu.tw/~ncu25352/Uploads/201312311030531151830864.pdf ), tested that PDF on another PC and it would allow me to save it.
I uninstalled Adobe reader 11 and reinstalled from the website ( get.adobe.com/reader ), I then uninstalled anything on the pc that relates to PDF's that I could find (which was just reader and a dictionary add-in for reader 9) and attempted to reinstall without any change in the problem.
To recap, PDF's will not save, and when I click save-as no save dialog pops up, I cannot save via the IE add-in either.
Any help would be greatly appreciated by both my boss and myself!

You mention IE, so I assume that you are on Windows.
How are you trying to save that PDF, using the IE menu bar File Save as, or the floating toolbar in the Adobe Reader plugin?

Outlook 2013 will not save Compact Navigation Option setting

We have started upgrading some of the machines in our office from Office 2010 to 2013, (win7 and win 8 machines). I have found that Outlook will not save the selection of "compact navigation" in the "Folder Pane/Options" settings. I
have tried a complete uninstall/reinstall of office 2013, resetting cleanviews, profile, etc. I cannot get it to save this setting. It always goes back to the extra large "Mail, Calendar, People, tasks" navigation. Any ideas? This is happening on
muiltiple machines that we have upgraded from Office 2010.

Copying answer from similarly asked question:
FOR THE FIRST STRING (To keep a compact navigation pane):
Press the START button and type in "regedit"
On the left side drill down to [HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Options]
Under EDIT in the toolbar select NEW>KEY and name it WunderBar. Make sure you have the new key selected.
Under EDIT in the toolbar select NEW>DWORD (32-bit) Value and name it ABCompact. Make sure you select it.
Under EDIT in the tool bar select MODIFY and change the value to 00000001
FOR THE SECOND STRING (To modify the order of the navigation items):
With regedit still open.
On the left side drill down to [HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Preferences]
Under EDIT in the toolbar select NEW>String Value and name it ModuleOrderAB. Make sure you select it.
Under EDIT in the tool bar select MODIFY and change the value to 1,2,3,4,5,6,7,8,9
Adjusting the order of the numbers will adjust the order they appear in. For instance in my case I wanted NOTES to show up fourth so my string is 1,2,3,5,4,6,7,8,9.

CS6 page settings using Property inspector will not save [subject edited by moderator]

I have a student who is working on building a webpage using a CSS template. They are trying to change their page settings (for example, the color of their hyperlinks) using the menu at the bottom of the page. However, these settings will not save. If anyone can give me an idea of how to move forward, I would appreciate it. Thank you

Which version and build # of DW CS6?
Do you have all the latest updates?
Also which operating system?
Has DW always behaved this way or is this something new?
Nancy O.

No matter what I do iTunes will not save my card details.

Dear all,
No matter what I do iTunes will not save my card details. Everytime I go to buy something it says "Your account information has changed" and takes me to the card details page. I update the card details correctly and click done and it takes me back to the store. I then go to buy something and it comes up with "Your account information has changed" and sends me back to the card details page with all the updated details I put in missing. This makes it completely impossible for me to use the iTunes store.
Please help!
Many thanks!
Other OS

scootchy69 wrote:
I have tried all that…I have tried multiple chargers and have not had any success! I think I have a lemon! Not too happy about all this either because I will probably have to pay for support since I have had the phone for more than 90 days
While Apple may request a Pay-Per-Incident, if it is determined that your device has a hardware issue, that PPI will bewailed after troubleshooting is completed. Or, you can request that they waive that if you've already done a lot of troubleshooting. The PPI is only for issues that a user could resolve on their own but want Apple to provide a walkthrough over the phone. You can get free support by going to an Apple Store instead, for example, as well.

Firefox will not save my Connections settings, so opens on manual proxy every time, rather than No Proxy?

I'm using Firefox 4.01 and it will not save my connections settings when I set them to "No Proxy" keeps defaulting to manual therefore it wont load any pages until I change it to "No Proxy" which I have to do every time I open firefox.

See:
* http://kb.mozillazine.org/Preferences_not_saved

CS4 on new 64bit machine will not save files, "unkown error"

I just upgraded my machine from an older 32 bit PC to a 64 bit PC running Windows 7. As part of the migration O'm having to re-install a lot of softwaare including Illsutrator. The install was succesful, Illy runs and will open all of my old AI files, but it will not save them. All I get id an "unkown error" message. New files created form scrath save ok; old files will save over or be "saved as"; if I copy the contents of an old fiel to a new page it will not save either. I have removed the AIprefs file but no change.
Any idea what the issue is?

I have had this problem as well and this is my take on it. It can open the files being that it's .ai format but it can't just save them again being that the previous save format was 32bit and now the save format is 64bit and when you ask it to save a 32bit file it wants to save it as 32bit again but illustrator can't do that from a 64bit system. The bit size does make a difference but if you go to save as instead of save it will save it and you can write over it. What your doing then is saving a new 64bit file over the old 32bit file.

Custom Authentication in 4.2 will not save Authentication Function Name

Upgrade from 4.0 to 4.2.
When creating a new Custom Authentication the Authentication Function Name will not save in the Apex Create\Edit screen. After the Apply Changes button is clicked and the authentication scheme reopened - the Authentication Function Name will be cleared. If PL/SQL code was populated in the source field - it will still be present.
Looking in the WWV_FLOW_AUTHENTICATIONS table - a new record is created but attribute_03 (this seems be where the Function Name is stored) attribute_05 and attribute_15 are null. The PL/SQL entered in Apex is there in the PLSQL_CODE field.
All preexisting Custom Authentications that existed - there fields are populated and still work correctly. However, if you edit the Authentication Scheme in Apex it nulls out those fields in the WWV_FLOW_AUTHENTICATIONS table and the scheme no longer works.
I can manually set attribute_03 to my function name, and attribute_05 to 'N' in the WWV_FLOW_AUTHENTICATIONS table and the Authentication scheme will work as long as you never try to edit it and save inside APEX( these fields are nulled out if you do this).
Also - Authorizations schemes are behaving similarly.
Checking the WWV_FLOW_SECURITY_SCHEMES table - attribute_01 is always NULL.
No error is ever given inside the Apex designer.
Any ideas how I can debug this?
10.2.0.4.0 DB.
Edited by: Bill14 on Nov 27, 2012 7:32 AM

That's what happens when you don't pay attention to what you are typing (me that is). Edited original post.
DB version is 10.2.0.4.0 (11.5.10 is our ebiz version)
The PL_SQL column in WWV_FLOW_AUTHENTICATIONS is a CLOB. Looking at a a data view in Toad it abbreviates the field to say(HUGECLOB).
This does not occur on apex.oracle.com and all of our 4.0 installs still behave as expected. The DBA said that he checked the install logs and did not see anyting out of order. I've never done an APEX install, is there a specific log file (or naming convention for a logfile) that I can tell him to look in or look for?

Excel will not save changes to chart axis

Similar Messages

Maybe you are looking for