Excellent FPS on very high in Crysis 2... very poor on medium in BF4?!
Got a GT60 2PC... I can run Crysis 2 on very high with constant 40-50 fps in 1080p, but, with BF4 I struggle to keep 20 fps on medium... any ideas?????
Quote from: MrHammonds1747;104047
Got a GT60 2PC... I can run Crysis 2 on very high with constant 40-50 fps in 1080p, but, with BF4 I struggle to keep 20 fps on medium... any ideas?????
What driver are you using?
Make sure you're running BF4 on discrete gpu(nvidia one) with AC adapter and high performance power plan.
Similar Messages
-
Why am I getting very high values for the very low frequency region of a random signal?
I am tyring to produce a power spectrum graph for a Tachogram data, related to Heart Rate Variability Analysis. This data can be thought to be as a random signal, but has a frequency spectrum range of 0 - 1HZ.
The problem that I am facing is, I am getting very high values for very low frequency region, closer to DC value. Even the DC value is really high, in the range 10^8. It is suppose to be a low number. Any suggestions would be appreciated.
Thanks.Here is what my work is all about. I am trying to develop a software for Heart Rate Variability analysis. I am not sure if you are aware of heart beat waveforms, they are bunch spikes, occuring at irregular intervals. We have to do analysis on this waveform. How ? First we have to create a plot called Tachogram. This is done by, for example, let's name the first spike R1, the second one R2, and the third one R3, and so on. This is how the co-ordinate points are created. (R1, R2-R1), (R2, R3-R2), and so on...
Here R1 is the time instant at which the spike R1 occurs, and R2-R1 is the time difference between these peak occurences. So, if we plot these values, then it gives us one like what you saw on your time domain plot. What we have to do with this signal is, we have to apply FFT technique to produce its power spectrum for analysis. Generally the frequency range of the spectrum goes from 0 - 0.5 Hz. They part this range into VLF, LF, and HF, and analyze how much power is distributed in these regions. The distribution would tell you if you were stressed out,or have worked out, things like that. Normally, you can view spikes around LF, HF region. If you had viewed the power spectrum for the data that I sent, then that's what it pretty much looks like. I think I have said a lot about it now. Hope you get it.
We were talking about the "other component", I can't really see where it lies, must be in the 60-80 sec. range in the graph. If you look at the spectrum, I am getting a huge value around 0.0033 Hz, how do I minimize or remove this ?
Also, I am using Unevenly Spaced Signal Spectrum.vi, I am not sure what excactly is the unit for the Power Spectrum output. Technical Papers denote, Periodogram algorithm used by this VI, gives Power Spectral Density ? If that's right, then the unit is V^2/HZ.
Please advise.
Again, I should thank you for your time and effort.
I have to meet a deadline this week in finishing this project, and your help is immense to me at this point.
Thanks & Best Regards, -
Very high sync speed but very low ip profile!! Ple...
Hello everyone.
I have been a BT customer for almost 4 yrs now, with little or no issues during my time with them. Until now!
About 2 months ago i mustve signed upto the 20mb bb, as my 8mb bb, was working great but i though why not to the extra speed. So i sign up, and i get about 17.8mb sync rate, GREAT im thinking. SLowly, i did not realise my bb kept dropping out and eventually it lowered the sync rate everytime and eventually it halted at a 4.5mb sync. I am thinking how is this possible, i had 8mb bb and it used sync at 8.1mb without fail and speeds were excellent.
So i called them logged a fault, on 21/11/2010. I explained to them what had happened, they understood, tried to do a few things their end, however nothing change, so they booked in an engineer for 22/11/2010. he came and saw everyhting was fine (i wasnt home at the time, my mum was) so did really have a chance ot explain properly, but i told him what i could over the phone whil i was at work, and advised your premises seems to be fine, must be exchange. OK . Bt followed up asking is everything resolved,i said no changes, speed it still slow.They booked another engineer for 7/12/2010.
He came, i happed to stay home this time, and i explained to him what is happening. He checked everything, ran some line tests, and notices my line can hand 16mb but it seems to have capped. he got the cap removed and it synced at 17.9mb, im thinking AWESOME. He checked the mains, even replaced the socket, because i had a old battered one, which was excellent. He advised give it few hours the ip profile should reset itself, just keep monitoring it. He also advised if your bb line kept dropping, then it would keep lowering the sync rate and this has what had happened originally. He also advise if it starts happening again, connect the router directly the mains as it was currently on the extension socket down stairs. Once he left, as adivsed i monitored and i kept seeing it was dropping off and very very frequently like every 10 minutes. So i took his advised connected the router to the mains upstairs with a filter and it has not dropped since. this was 2 days, 2hrs 31mins ago.
However my ip profile has not changed. my sync rate has increased by more than 400% and has been very stable as i have notice with NO drop out.
I have been doing research, i have read any major sync increases the ip profile should reset within a few hrs, but as you can see it hasnt in more than 48hrs. I know i should wait maybe another 24hrs but i dont think it would make a difference. I phoned BT yday and they stated this the best your line can handle, i explained to them the history of speed and the recent incident, but told me nothing can be done and this the best i can get, they wud not understand my connection syncing how it should but the profile is stopping me from enjoying it!
I was wondering is there any way i can get this sorted, so i can enjoy really fast broadband?
Here are bb router (homehub 2.0 stats below and the speedtester results also):
ADSL line status
Connection Information
Line state
Connected
Connection time
2 days, 02:43:29
Downstream
17,832 Kbps
Upstream
1,131 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
5.6 dB / 5.8 dB
Line attenuation (Down/Up)
24.1 dB / 9.8 dB
Output power (Down/Up)
26.8 dBm / 1.7 dBm
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
3132 Kbps
0 Kbps
4000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 3132 Kbps
For your connection, the acceptable range of speedsis 1200-4000 Kbps.
Additional Information:
Your DSL Connection Rate :17832 Kbps(DOWN-STREAM), 1131 Kbps(UP-STREAM)
IP Profile for your line is - 3500 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 3.43:16.63:79.94 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
918 Kbps
0 Kbps
1131 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 918 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1131 Kbps
PLEASE PLEASE, can anyone help me in getting this sorted, i know what my line is capable and i know its faster than this.
Thank you in advance and let me know if any more information is required. THanks once again.Similar situation here. I fitted a BT accelerator a month after the switch to ADSL2+ to get that last little bit of speed and instead it caused repeated dropouts. My IP profile got hammered and SNR set crazily high as a result.
Removed the accelerator and have a rock solid line again. That was 3 weeks ago and my profile is now at 12000 with SNR down to 12db. Hopefully will be back to where I was before the accelerator some time by the end of January.
I am using a Dlink 2460 so could force the SNR down with DMT software but am holding off at the moment as BT's profiling is so aggressive I don't want to give it any excuse to hammer my line again. -
HDD with very high temperature
Hi hp expert,
I have HP Pavilion dv6-3148el (purchased from 7 months in Italy) that mount hard disk Samsung HM641JI, the cpu temperature is right and the fan is regular (discreet silence), BUT the HD temperature is very high, so I have performed a S.M.A.R.T. test:
- drive Health is excellent;
- drive Performance is good;
- drive Temperature has exceeded 98°C !
Also I feel a strong heat to the left side of the touchpad just where the wrist rests, and because of that I very much annoyance in its use (and I moan to have bought).
Someone from HP can help me solve this problem ?
Or have any suggestions to solve it ?
Regards
DanielYeah, I put a very small amount on, though I spread it out rather than just sticking the HSF on top of it (I've seen different sites say either way). That temp is in normal mode, though from most tests I've seen even silent mode shouldn't be any worse than the stock cooler was. Admittedly, my case cooling is fairly average, I'm not terribly keen on spending a fortune on an aluminium box, and I'm aiming for silence here, not overclocking at all.
While perhaps I'm wrong, I'd be really surprised if it's just "the way it should be" for this cooler, given that it's performing substantially worse than the stock so far, and considering that the temperature spikes up at load within seconds, it just seems a bit odd to me that the case cooling could have an effect so fast. -
What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos.
What is best all in one printer for my new MacBook Pro ? Needs to make very high quality photos. Using USB connection.
That's a difficult one but I'd always go for HP as they make so many excellent models that you'll always be able to buy the cartridges from almost anyone. Theyre darn good printer too. I have four in the office here and one of them is a very neat flatbed with exceptionally high tonal qualities. One of their cheaper models is the HP 5520 A4 inkjet all-in-one - CMYK. Good value at £70 and 4800 x 1200 DPI.
-
Very high memory usage with Yahoo Mail
After using Yahoo Mail for an hour or so my memory usage increases to a very high level.
Just now, after reading and deleting about 50 e-mails (newsletters etc.) I noticed Firefox 17 running slowly and checked the memory usage in Windows Task Manager (I am using XP) and it was 1.2 Gb. My older laptop only has 2 Gb of RAM. Yahoo Mail was the only thing open at the time.
I never notice this problem with Gmail which I mainly use. However I use Yahoo Mail for quite a few newsletters etc. that are less important and which I only check once a week or so.
I found the following bug report about 3 years old which almost exactly describes my problem.
https://bugzilla.mozilla.org/show_bug.cgi?id=506771
But this report involves a much earlier Firefox version, and at the end it seems to say that the problem was fixed. However it well describes my current issue with Firefox 17, especially the continual increase in memory while using the up/down arrow keys to scroll through Yahoo e-mails.
Is this normal to have to shut down and reopen Firefox every hour or so to clean out the memory? For some reason I only notice this when using Yahoo Mail. After using many other sites and having multiple tabs open for several hours I rarely reach that kind of memory usage. About the highest I've seen with other sites after a couple of hours is 600 Kb which is roughly when I start notice slower response times.See also:
*https://support.mozilla.org/kb/firefox-uses-too-much-memory-ram
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Very High messages not forwarded to SAP out of the Business Hours
Dear Gurus,
I work for a SAP partner and we have the Solution Manager 7.0 + EHP1, SP stack 24, running under a Windows Server Machine with MS Sqlserver Data Base and we're facing the following problem:
In between the business hours we are able to forward messages to SAP manually, however, after the business hours, messages set as 'very high' priority aren't being forwarded automatically to SAP.
We have already triple checked the configs listed on the SAP Notes 1084744, as well ran the Z-Report included in the note 1225682, however no success at all.
Would you kindly please shed a light on this matter?
Thank you in advance.
Everton.Hello Everton,
If you are a var Customer using the transaction type ZLFN and action profile ZSLFN0001_ADVANCED, the action profile should be AI_SDK_STANDARD.
I don't now if that is the case.
If your issue persists, please trigger a message in SV-SMG-SUP.
Best regards,
Guilherme -
Over the last few months my Mac has developed a worrying habit.
Within the first few minutes of starting it up (perhaps on average about 50% of the time) it will completely lock up. This may happen at the Log In screen (if I start up the Mac & then leave it for a while) or during normal use.
Often the first symptom is a very high pitched (but quiet) whining noise that seems to come from the loud speaker on the front of the Mac. The pointer may freeze at this point, or it may still be moveable for 5 or 10 seconds before it freezes. It sometimes turns into the spinning beach ball during this. Once locked up the only way I can restart the Mac is to hold down the power button on the front for a few seconds to completely reboot the machine.
Once the Mac has restarted, it usually behaves normally, almost always for the rest of the day. The initial lock up & resulting restart only normally seem to happen the first time I use the Mac that day.
The only peripherals attached to the Mac (apart from the display, keyboard & mouse) are an ADSL modem, a USB printer and a pair of Apple Pro speakers, and this setup hasn't changed since long before the problems started, so I'm confident that I can discount the peripherals causing problems. I doubt that unplugging the speakers, for example, would have any effect.
I've run Disc Utility, OnyX and DiscWarrior without anything major cropping up. My instincts (I've been troubleshooting Mac problems for 16 years) tell me that I have a fundamental hardware problem, possibly with one of the 4 RAM DIMMs installed.
The RAM configuration is shown in the attached screen grab.
I'm considering removing one DIMM, running with 1.5GB of RAM rather than 2GB for a while, and repeating with a different DIMM removed each time until I can hopefully isolate the dodgy DIMM.
Do people feel this is a sensible approach, or should I try something else first?
Many thanks.Sometimes visual inpection will show bulging tops/sides., my guess is if it is it's most likely in the PSU.
Possible cheap fix, You can convert an ATX PSU for use on a G4...
http://atxg4.com/mdd.html
http://atxg4.com/ -
Need to create a new spreadsheet or be able to edit the one I have.
I use this spreadsheet as a work order form for social service agencies. They enter name address etc., and then there are various work projects that they can select as well.
The one I have from the organization I work with is an excel file but it does not convert over very well. Instead of being 7 pages it is more like 11 or so because things run off the page. I am trying to delete certain things and move them over but not working out very well so thought it might be easier to start over fresh.
Is numbers the program to use? If so, any useful tips?If the form is going to be used on an iPad, Numbers is the only game in town.
Numbers is available for Macs only (and iOS devices). Excel is available for PCs and Macs. If you are in a mixed environment of Windows PCs and Macs and you are using this document as an electronic form, Excel is probably the better choice. Otherwise you will need to export to Excel for the PC users then import from Excel to retrieve their data. The import/export process is not perfect. A file that has been exported then reimported will not be the same as the original file. I would assume social services agencies are almost entirely PC-based.
If the form is to be printed or turned into a PDF for distribution and use by the social services agencies, either Excel or Numbers would do the job but right now Excel might be the better choice. I would have recommended Numbers '09 but I cannot recommend Numbers 3 for anything thsat requires printing until they give us the layout and printing functionality we used to have (editing in Print View, ability to set margins, etc).
If everything else in your department/operation/agency is Windows PC and Microsoft Office based, you would be better off sticking with the standard.
I hope that helps. -
I have just bought a hdmi tv and would like to view very high quality images, using apple tv, stored on my external hard drive. I also have blue ray movies stored on my external hd. will i be able to stream these to my tv and view them in 1080p?
sorry, why isn't correct?
i try convert video with quick time to apple tv, import in itunes( that's ok) but is impossible to synchronize my apple tv ( unsupported file).
where I wrong?
please could you explain me the correct procedure?
i have some video ( holiday movie an photo movie in mpeg2 full HD) to convert for apple tv, and from 2 years some video editing with imovie.
normally I prepare my video with Imovie, create a file .mov full hd (like master) and with roxio convert file for apple TV.
apple world is new for me, after 25 years with microsoft!
thank so much
mauro -
iPhone 4 OS 7.1.2 (11D257) display normal when switching on, turns to very high contrast with bright primary colours only, no tonal graduation.Initially problem arose every time I switched the Camera on, but has worsened such that any application can cause it. In Camera, after a short time screen goes black. Also, Wifi no longer works.
You're welcome
In case you don't want to buy a new iPhone, Apple will replace the whole unit if you are willing to pay the service fee of 149$ for the iPhone4.
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Service Answer Center - iPhone -
G5 Dual 2.5GHz freezes with a very high pitch sound
Hi
My G5 Dual 2.5GHz freezes with a very high pitch sound from inside the comp. It happens occasionally after a few days of everything running smoothly. Someone can help ?
PowerMac G5 Dual 2.5 GHz Mac OS X (10.4.9)Hi Phil Brayshaw-
What does the little white power light do? This should be helpful: About the Power Mac G5 (Late 2005) diagnostic LEDs
Although it sounds to me like you have tried most of the troubleshooting steps, this document is a good overall reference to address this particular problem: Power Mac G5: What to do if you see black, white, or no video at start up
Have you tried another monitor and/or double-checked your cable and its connections? If everything else is working as expected that would certainly be a major suspect.
Luck-
-DP -
firefox is working my system too hard and the system is revving very high.
== This happened ==
Every time Firefox opened
== today ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7Does this start right when you start firefox or after you've loaded some pages? Are there specific pages that cause this problem?
-
Final Cut Pro X 's process is very high.
Final Cut Pro X process is very high and its use higest memory..what can i do to decress and how to incress speed?
when i use Final Cut Pro X then my MacBook Pro working very slow.I'm taing pics now...for some reason I have version 10.1?? My memory is good, but I recall there being not a 1 there...
-
I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto.
What format are they? Tiif? Jpeg? You can compress them with a lot of apps - including Preivew and just about any graphics editor out there. I'm not sure that 45mb would crash iPhoto thogh, are yo sure that's the cause? I know that some folks have mentioned pixel dimensions causing issues, as can color profiles.
Regards
TD
Maybe you are looking for
-
Suggestions for dual DVI video card for Elite 8000 SFF?
Any suggestions for dual dvi video cards that will fit the Elite 8000 SFF? Thank you, jajke
-
I photo quits everytime i click on a photo.
I photo quits after about 10-15 seconds of moving the curser over photo's or if i click on a photo, however it will remain running if i don't touch it i can still access the top bar ie. file, edit, photos events without it closing. when it closes a m
-
Lumia 520 eating phone credit/balance
Hey. I recently bought Nokia Lumia 520. It's quite awesome phone. But there's one problem. My phone credit/balance keeps somehow decreasing a bit even though I haven't called or sent any messages. It eats about 10 cents in 6 hours. I have shut every
-
OK, i had hooked up my ipod nano for the first time after we had to use recovery mode on the comp at my house due to what we call the worm from h*ll and it apparently opened up a whole new itunes library, so i transferred everything from the old one
-
My old hard drive crashed. I now have a brand new system. I want to re-sync my iphone so I can continue to add music. When I re-sync, it warns that it will overwrite existing files. Does that mean it will erase the playlists/music/pictures, etc. on m