Excellent Signal / Unable to Connect to Internet

I have model WRT54G connected to my desktop and have a Dell Laptop with Vista.  The router signal on my laptop shows excellent signal but I cannot connect to the Internet.  A message appears stating something about a MPFP Inbound Filter Packet.  I believe this has something to do with McAfee.  Not sure if this is even the problem.   Would greatly appreciate any assistance.

I recently purchased a WRT54GX4 and have the exact same issues.  From my laptop, I can ping any website in the world under dos command line.  However, as soon as I try and connect with my browser, it clocks and times out.  I triple checked everything, started over, and still get the same symptoms.  The good thing is the symptoms are consistent and I am not the only one.  I will keep digging and let you know if I come up with closure.  Dave

Similar Messages

  • Wi-fi link is ok (strong signal), but safari is unable to connect to internet. Some setup I'm missing?

    Wi-fi link is ok (strong signal), but safari is unable to connect to internet. Some setup I'm missing?

    Does the iPod connect to other networks?
    Do other devices sucessfully connect?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

    I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
    A month later, I am unable to connect to internet or print wirelessly.
    It states that I am connected to my router.
    When I trouble shoot, it cannot find the problem.
    My wireless connection and cable connection are fine on the MAC side.
    Please help.

    looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router?  Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

  • TouchSmart 600 unable to connect to Internet & email accounts. Error Code 0x80070057

    TouchSmart 600 unable to connect to Internet & email accounts.  Receive Windows Network Diagnostics error message "An unexpected error has occurred.  The troubleshooting wizard can't continue"  Error Code: 0x80070057.  Using old laptop to send this message.  Tried to restore back to a certain date but was only able to restore back to latest Windows download which did not correct my problem.  Any help appreciated.  Thanks.

    I have the same problem connecting to the Internet that it is. It is more intermittent than permanent though. I have updated the driver from HP site, but no change.  From the searches on the web problem seems more widespread though. HP do something! Please!

  • CS5.5 Subscription: Unable to connect to internet.

    So, for two days, I've been unable to use either of the two Creative Suite 5.5 Master Collection licenses I'm currently subscribing to and paying a pretty penny for. Yesterday, Adobe customer support informed me that something must be "wrong with my machine", so, I dutifully did all of the testing, cleaning up, repairing and troubleshooting I could think of on that machine. CS5.5 Subscription on that one still doesn't work. Today, I attempted to use the other license I'm paying for on a different machine, with the exact same results.
    When attempting to open any of the products, I get this message:
    When I click Try Again, I get this one, which stays on this screen and never changes:
    As you can imagine, I'm fairly certain I'm connected to the internet, since I'm typing this in the forum right now. I've attempted a wired connection, wireless connection and my MiFi connection, restarted, stood on one foot while patting my head, and attempted to bribe my software, with the same results each time.
    Specs:
    MacBook Pro 15" / Snow Leopard
    Mac Mini / Lion
    To reiterate, here are the steps I've attempted:
    Repair permissions
    Repair disk
    Multiple restarts
    Move from Wired to Wireless connection
    Move from Wireless to MiFi connection
    This isn't an issue with Lion, since it's occuring on both machines with different serial numbers. This is a problem with Adobe's subscription licensing server, or a problem with the way the software connects to it. Any assistance is appreciated, and the quicker I get it, the happier I'll be, since this has already caused me to fall behind on a deadline. At this point, I'm considering canceling the monthly subscription and reinstalling my version of CS4, which, while missing some of the features I upgraded to CS5.5 for, at least works.
    Side note for Adobe personnel: It's not entirely clear in your FAQs for the subscription editions that you have to be connected to the internet every single time you open the software.

    I'm getting that exact same message. Started today and it's driving me crazy. I can't find any information on error code 194:100. I talked to customer support through chat and they hadn't any clue as to what error 194:100 could be. They said it was technical and I should contact tecnical support. Why anyone would want to talk to a support agent that cannot fix problems and just generally tells you to call the real customer support, I have no idea.
    This is the second time I've had problems with my software activation. It was slightly different but similar in several ways. I figured I'd metion some specifics to see if it matches more or less anyone else's problems.
    Both times I've noticed I've had trouble with my adobe account id. Specifically I can log in just fine but I can't access the acount info section. I get a page not found error.
    This time around I noticed many other weird things.
    Adobe updater disappeared from my mac.
    Encoder refused to encode certain premeire sequences.
    Premiere froze on export of those same sequences.
    And I first got the Unable to Connect to internet error this morning. Followed shortly The "Activation Failure error code #194:100" one. I've uninstalled and reinstalled several times and Premiere seems to run fine at least once. But if I try to open any other adobe application or if I load another project I get error 194:100.
    The first time I had Activation Problems I ended up having to return the software, wait for the refund, delete my adobe id account, create a new one and buy it again with the new account.
    I hope this is not a repeat of last time cause I'm seriously not rebuying defective software a third time.
    I don't know if this helps but your problem seemed similar to mine.
    15" Macbook pro 2.66 GHz Intel Core i7
    NVidia GeForce GT 330M
    OSX 10.6.8Snow Leopard
    4GB DDR3 Ram

  • HT4623 iphone 5 unable to connect to internet

    iphne 5 unable to connect to internet

    I had the same issue and usually a reset of all the network settings on iphone did the trick.
    this method did not work with my iphone 5 . i did something in router settings that seemed to change things a lot, for the better.
    the wifi channel usually the routers use is channel 11, so i changed mine to channel 1. this solved my issues and the iphone connected just fine to the network, without restarting the iphone or resetting any settings or switching off and back on the wifi.
    i am on 6.1.3 iOS

  • HT4623 After ios update on my ipad mini i am unable to connect to internet via cellular connection

    i Have update ios 7.0.2 on my ipad mini. But after update of ios 7.0.2 i am unable to connect to internet via cellulau connection. Cellular connection appears on my screen but i get error as "Could not activate cellular data network you are not subscribed to a cellular data service". Cellular connection was working prior to ios 7.0.2 update. Please help.

    GOT MINE FIXED -
    THE 7.0.3 update reported my iPhone as LOST or STOLEN  to Verizon.
    They suspended my iPhone service immediately (as I would expect them to) and THAT is why I couldn't get on.
    Called Verizon wireless - they restored me in 30 seconds - EVERYTHING WORKS AGAIN.
    They said "we've been doing this ALL MORNING."
    Hope this works for others, too!
    You blow bright orange chunks, Microsoft, er, I mean, Apple.

  • Unable to connect to internet via the proxy - Proxy set up OEM 12c

    Windows server 2008 64 bit
    OEM 12.1
    I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
    But when I input my Oracle support credentials I get an error :
    Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
    Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
    test successful :
    https://updates.oracle.com was tested successfully using the Proxy.
    Go to set oracle support credentials error :
    Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
    In the emoms.log file :
    2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests.  ).
    java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests.  )

    Please check the following section in
    http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
    Enabling Oracle Management Service to Access My Oracle Support
    Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
    At minimum, the following URLs should be made available through the firewall:
    aru-akam.oracle.com
    ccr.oracle.com
    login.oracle.com
    support.oracle.com
    updates.oracle.com
    About the dontProxyfor Property
    When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
    For example, suppose the following were true:
    You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
    You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
    You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
    In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
    http://support.oracle.com
    The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
    proxyHost=proxy42.example.com
    proxyHost=80
    dontProxyFor=.example.com, .example.us.com
    PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

  • When i try to load ios 7 to my i phone i receive error message unable to connect to internet however my internet is connected

    I am trying to download ios 7 using i tunes application - get screen saying got download - press to download then recieve message unable to connect to internet please check connect and retry - however I am connected and so is my phone via wireless - I can not get past this error message please help.  many thanks

    Moved to Adobe Digital Editions forum.
    Neil

  • Can't activate cs5 cause, keeps telling me unable to connect to internet, although am connected

    can't activate cs5 cause, keeps telling me unable to connect to internet, although am connected, any help please ?

    it's a downloaded file. When i failed to activate it, i tried it trial bs it's expired and i wanna activate it . The serial number is right but it keeps telling me unable to connect to internet :s :s

  • I am unable to connect to internet through my tata photon  ZTE device.I am on OS X MAVERICKS VERSION 10.9.2.

    I am unable to connect to internet through my TATA PHOTON + ZTE device.
    Please help.

    https://discussions.apple.com/thread/3680625?tstart=30
    Best.

  • 9780 style unable to connect to internet

    My style which has basically verizon based cdma network  device ,i am using it testing it in india,i am unable to connect to internet,though i upgraded os successfully.AnyBody help me out on this.
    Similarly i have a curve 9300 device ,which also similar sort of problem,i did not wipe the os and reinstall it,Is there any other work around for this.
    Regards
    Rakesh Shankar.P

    I am trying to connect to the my wifi,it gets connected but cannot access it.

  • I upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet

    i upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet 

    I can use my iPhone only with wifi .
    I don't get any signal and I can not connect to
    The Internet without wifi.
    When I don't use my wifi from home I have lost all connection to the net
    My iPhone is on and working it does not shut down

  • Phone connects to the wifi just fine, my phone does not have signal and cannot connect to Internet away from wifi network t

    i upgrade my iPhone 4 to iOS 6 and if I'm close to my router the signal indicator comes on and the phone connects to the wifi just fine, but if I step away from the router my phone does not have signal and cannot connect to Internet 

    I can use my iPhone only with wifi .
    I don't get any signal and I can not connect to
    The Internet without wifi.
    When I don't use my wifi from home I have lost all connection to the net
    My iPhone is on and working it does not shut down

  • Post Moved Unable-to-connect-to-internet-with-spe...

    post moved http://community.bt.com/t5/Other-BB-Queries/Unable-to-connect-to-internet-with-specific-computer/td-...
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Ok..So you mean still cannot accessing the website with Internet connection? Try to use nslookup in command prompt to check whether can resolve domain name correctly. Also make sure you can ping the router's LAN IP from computer.
    If not, you can try to use the following DNS servers from OpenDNS.com:
    208.67.220.220
    208.67.222.222
    Hope helps..
    picoHat
    Home Network, Wireless Network and Computer Networking Made Easy

Maybe you are looking for