Exception  caught if error is  raised  in Service Error Handler

Can any one help me on this? Im not able to understand the funda for the behaviour?
Proxy Service A calls proxy service B using Publish action. In proxyservice B - service error handler, Im raising an error with customised message. Proxy service B routes to another proxy service C which routes to Business service.
If my business service gives me timed out , error is handled at Proxy service C error handler , and again Proxy Service B error handler is invoked. Here my code stops where Im raising the error.
When I raise error in Service Handler where it is being caught?
Thank you in advance.
Regards,
Vyshnavi

Hi Vyshnavi,
There are four levels where you may define an Error Handler and it will catch errors related to this level only. If it could not handle any error reached to it, it will propagate the error to the higher level error handler. All errors which can not be handled at lower levels, System Error Handler, handles those.
To know more about this, please refer -
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1040161
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1128288
Regards,
Anuj

Similar Messages

  • Advantage of Java Exceptions over C error handling.

    I understand the advantages of Java Exception handling(as against C) when it comes to the ability to define exclusive Exception types or reuse exceptions, documentation benefits of the throws clause, advantages due to OO etc. But some people say that using exceptions in Java it is possible to recover from an exceptional condition and that's an advantage over how errors are dealt in C.
    Is that really an advantage? (I mean is that true?)AFAIK in C errors can be handled using perror or errno.h. For every error code generated there seems to be a description. And by checking the return values from functions we could see if there had been an exceptional condition and if there really had been one take appropriate action and recover from the error. So how is it that Java can recover from exceptions while in C it is not possible to recover from errors?
    Thank you very much.

    I'm waiting in my cold cell when the bell begins to chime
    Reflecting on my past life and it doesn't have much time
    Cos at 5 o'clock they take me to the Gallows Pole
    The sands of time for me are running low
    When the priest comes to read me the last rites
    I take a look through the bars at the last sights
    Of a world that has gone very wrong for me
    Can it be there's some sort of error
    Hard to stop the surmounting terror
    Is it really the end not some crazy dream
    Somebody please tell me that I'm dreaming
    It's not so easy to stop from screaming
    But words escape me when I try to speak
    Tears they flow but why am I crying
    After all I am not afraid of dying
    Don't believe that there is never an end
    As the guards march me out to the courtyard
    Someone calls from a cell "God be with you"
    If there's a God then why has he let me die?
    As I walk all my life drifts before me
    And though the end is near I'm not sorry
    Catch my soul cos it's willing to fly away
    Mark my words please believe my soul lives on
    Please don't worry now that I have gone
    I've gone beyond to see the truth
    When you know that your time is close at hand
    maybe then you'll begin to understand
    Life down there is just a strange illusion.
    Yeah, yeah, yeah, Hallowed be thy name
    Yeah, yeah, yeah, Hallowed be thy name

  • Regarding error showing as exception caught  by adapter framework

    hi all.
    here in my scenario iam doing a file to rfc.
    but when iam sending a file to rfc and when i see in sxmb_moni its showing as sucess.
    bue when i look at runtime workbench under message monitoring (tab) it was showing as
    MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
    Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception thrown in method process. The transaction is marked for rollback.: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback..
    SO WHAT COULD BE THE ERROR IS THE EROR THAT WS SHOWING RELATED TO XI R SAP R3(system that was recieving)
    waiting for the excellent answer.
    cheers.
    seeta ram.

    HI Matias.
    yes i did with the custom Rfc and the result is still the same
    and to be more confident i was creates another xi scenario from file to Standerd Bapi   BAPI_COMPANYCODE_GETDETAIL by creating a simple file with only one field and mappedwith only the request Message type of this Bapi and tested it.
    and even this scenario is also showing the same in reciever rfc and under runtime work ench its showing the same as my old scenario and it is as follows
    2007-10-15 10:47:51 Success Message successfully received by messaging system. Profile: XI URL: http://jssxid0:50000/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
    2007-10-15 10:47:51 Success Using connection RFC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
    2007-10-15 10:47:51 Success Message successfully put into the queue.
    2007-10-15 10:47:51 Success The message was successfully retrieved from the receive queue.
    2007-10-15 10:47:51 Success The message status set to DLNG.
    2007-10-15 10:47:51 Success Delivering to channel: ReceieverChannel_RFC
    2007-10-15 10:47:51 Success MP: entering
    2007-10-15 10:47:51 Success MP: processing local module localejbs/RfcAFBean
    2007-10-15 10:47:51 Error MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
    2007-10-15 10:47:51 Error Exception caught by adapter framework: Exception thrown in method process. The transaction is marked for rollback.
    Time Stamp Status Description
    2007-10-15 10:47:51 Error Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception thrown in method process. The transaction is marked for rollback.: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback..
    2007-10-15 10:47:51 Success The asynchronous message was successfully scheduled to be delivered at Mon Oct 15 10:52:51 SAST 2007.
    2007-10-15 10:47:52 Success The message status set to WAIT.
    2007-10-15 10:52:52 Success Retrying to deliver message to the application. Retry: 1
    2007-10-15 10:52:52 Success The message was successfully retrieved from the receive queue.
    2007-10-15 10:52:52 Success The message status set to DLNG.
    2007-10-15 10:52:52 Success Delivering to channel: ReceieverChannel_RFC
    2007-10-15 10:52:52 Success MP: entering
    2007-10-15 10:52:52 Success MP: processing local module localejbs/RfcAFBean
    2007-10-15 10:52:52 Error MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
    and the message in sxmb_moni shows as it is processed sucessfully and
    at reciever rfc as
    Receiver channel 'ReceieverChannel_RFC' for party '', service 'CD103' (internal name 'RfcClient[ReceieverChannel_RFC]')
    Client data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=103, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=mandapativ, jco.client.sysnr=00, jco.client.ashost=168.89.182.33}
    Repository data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=103, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=mandapativ, jco.client.sysnr=00, jco.client.ashost=168.89.182.33}
    Current pool size: 0, maximum pool size : 1
    waiting for your great answer.
    cheers.
    seeta ram.

  • Can error handling framework use fault policies and BPEL catch blocks

    As part of an integrated customer solution that makes substantial use of SOA Suite (including OSB, BPEL, Mediator, etc) we are in the process of designing an “Error Hospital” subsystem to expose a web service API specifically for BPEL services and/or the OSB layer to call whenever they encounter an exception which they cannot handle so that the appropriate user is notified of the error (via email) and the error is recorded (in an appropriate common fault format, with error codes elaborated into more meaningful descriptions, etc) within OEM, immediately prior to returning the exception to the caller.
    The problem we have experienced in our design is as follows:
    •     We have an error handling service to be called, inside the BPEL catch blocks, when an error occurs to notify the appropriate user, via email, that an error has occurred;
    •     We also use the error handling XML fault-policies so that we can recover from an error using OEM (via human intervention);
    •     The error service needs to be called before the process is suspended (waiting for human intervention) so the email notification and error message formatting occurs BEFORE the recovery action. Unfortunately the fault policies trigger BEFORE the error handler is able to transform the error into the appropriate format and notify the user so the error recorded is not the reformatted one and the user is never notified.
    The key question is how can a BPEL, upon catching an exception, invoke the error handling service and AFTER that send the error to OEM (and have the process suspended).
    It seems the two mechanisms "cannot play nicely together"

    As part of an integrated customer solution that makes substantial use of SOA Suite (including OSB, BPEL, Mediator, etc) we are in the process of designing an “Error Hospital” subsystem to expose a web service API specifically for BPEL services and/or the OSB layer to call whenever they encounter an exception which they cannot handle so that the appropriate user is notified of the error (via email) and the error is recorded (in an appropriate common fault format, with error codes elaborated into more meaningful descriptions, etc) within OEM, immediately prior to returning the exception to the caller.
    The problem we have experienced in our design is as follows:
    •     We have an error handling service to be called, inside the BPEL catch blocks, when an error occurs to notify the appropriate user, via email, that an error has occurred;
    •     We also use the error handling XML fault-policies so that we can recover from an error using OEM (via human intervention);
    •     The error service needs to be called before the process is suspended (waiting for human intervention) so the email notification and error message formatting occurs BEFORE the recovery action. Unfortunately the fault policies trigger BEFORE the error handler is able to transform the error into the appropriate format and notify the user so the error recorded is not the reformatted one and the user is never notified.
    The key question is how can a BPEL, upon catching an exception, invoke the error handling service and AFTER that send the error to OEM (and have the process suspended).
    It seems the two mechanisms "cannot play nicely together"

  • Sender Mail Adapter Error: exception caught during processing mail message;

    HI , I am configuring mail to file scenario. Need to read mail content (no need to capture From,TO or Subject details) and create a file with the content in the mail.
    Need to read mails from microsoft outlook. Exchange server has been configured for POP3 protocol.
    Following are the details provoding in sender mail adapter:
    URL: provided url in the format: pop://<server name>
    Authentication method: plain
    provided user credinetions to access mails.
    poll interval - 1min
    content encoding none.
    processing parameters : quality of service-exactly once
    Since there is no need to capture From,TO or Subject details, didn't select the option - use mail package.
    Verified for unread mails in the mail box and made sure that there are few unread mails.
    Also, created data types and other components in IR and completed mapping.
    But after starting sender mail communication channel, getting error "exception caught during processing mail message; java.lang.NullPointerException" in RWB-adapter-communication channel monitoring.
    please let me know what needs to be done to resolve this error.
    Thanks.

    HI Stefan, i tried, but still it is giving same error. Yes, i am able to access outlook mail with the user credentials given in the communication channel to access exchange server.
    I am using message protocol: xipayload . Also since i dont have to capture TO,from,subject details., created data type just with one element of type string, not in the standard format .Does this makes any difference.

  • Soap to proxy scenario Getting exception caught with cause   error

    Hi Experts,
    MY scenario is soap to proxy i am  getting below exception message in advanced engine configuration in ICO.
    OAP: request message entering the adapter with user J2EE_GUEST
    09/10/2014 11: 06: 03 346 XI Information Packaging (Bulk Mode) is not Enabled, Proceeding to the Normal Processing.
    09/10/2014 11: 06: 03 346 XISOAP Information: Received an XI message for processing
    09/10/2014 11: 06: 03 598 Error SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
    09/10/2014 11: 06: 03 598 Information SOAP: completed the processing
    OAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
    09/10/2014 11: 06: 03 598 Information SOAP: completed the processing
    09/10/2014 11: 06: 03 598 Information SOAP: response message to continuing 7477aafa-38da-11e4-beed-00000028af0a
    09/10/2014 11: 06: 03 599 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
    09/10/2014 11: 06: 03 599 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
    payload is contains some  special charters in  which is in protiguse language
    example.
    • AWPJ SERV DE TERCERIZ and
    dot is the special char
    same payload while testing using sproxy tcode dot "•" is converting in " # "symbol and with out error its successfully updating the database in ECC.
    while testing using the same payload using soap ui removing the dot symbol from the field its successfully processing  and updating the database.
    is this interface is failing in PI level ? or ECC i am not getting dump in ecc.
    is there any special character conversation in sap pi level.
    where this message exactly failing is in PI level or in ECC level?
    Help us find the solution.

    Hi Ravinder,
    When you mark the option Do not use SOAP envelope the adapter will not generate the SOAP envelope therefore you need to set an extra mapping in the Request to wrap the SOAP envelope. For example with XSL:
    <?xml version="1.0" encoding="UTF-8"?>
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
    <xsl:output method="xml"/>
        <xsl:template match="/">
            <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
                <SOAP:Header/>
                <SOAP:Body>
                    <xsl:copy-of select="/"/>
                </SOAP:Body>
            </SOAP:Envelope>
        </xsl:template>
    </xsl:stylesheet>
    Later in the response you will have the SOAP envelope tags. (You can do a first try without java mapping only to see in the monitoring the response with the junk character).
    When you determine the junk character you can try to use and to modify the next java mapping SAP PI - Deciphering apostrophes in XML - Process Integration - SCN Wiki to deal with your problem.
    Hope this helps.
    Regards.

  • Got internal error Exception caught in pfrrun() while running PLSQL in apex

    Hi,
    The apex 3.1 is running on the windows 2003 box with 10.2.0.3 database.For almost 3 weeks,there are error messages on the alert log that
    ORA-00603: ORACLE server session terminated by fatal error
    ORA-03135: connection lost contact
    When the trace file is observed,the following messages is displayed
    *** 2008-07-29 07:25:42.715
    *** ACTION NAME:(PAGE 26) 2008-07-29 07:25:42.684
    *** MODULE NAME:(APEX:XXX) 2008-07-29 07:25:42.684
    *** SERVICE NAME:(test) 2008-07-29 07:25:42.684
    *** CLIENT ID:() 2008-07-29 07:25:42.684
    *** SESSION ID:() 2008-07-29 07:25:42.684
    *********START PLSQL RUNTIME DUMP************
    ***Got internal error Exception caught in pfrrun() while running PLSQL***
    ***Got ORA-3113 while running PLSQL***
    PACKAGE BODY FLOWS_030100.WWV_RENDER_REPORT3:
    Did somebody encountered this error?What is the problem here?please advice on this.

    This was upgraded to 3.1 from a month back and there
    are no messages on the development box where the
    envirnoment is the sameI'm not sure (at the moment I have not instance with APEX here) but FLOWS_030000 should be APEX 3.0 package...
    So to say it's a corpse of previous APEX installation...
    But there is an Oracle Application Express (APEX) where you can ask further questions about APEX structure.
    Message was edited by:
    Faust
    Edit:
    alert log internal error exeception caught in pfrrun() while running pl/sql

  • SAP HANA XSODATA service (Service exception: column store error.)

    Hi all,
    i have a problem with my calculation view using xsodata service on it. (There's an input parameter called P
    _SWERK)
    In my calculation view, the data origin are two analytic views (on which the input parameter P_SWERK should be filter data at beginning of the sql script code).
    First i read the analytic views with function CE_OLAP_VIEW and after i do a CE_PROJECTION function on them using the input parameter P_SWERK like a filter on field SWERK.
    But when i run my application on browser the following error occurs :
    <message xml:lang="en-US">Service exception: column store error.</message>
    The link is this :
    http://host:port/Project_DM/services/Test/TEST_ZIIG_PDM_CALC_VIEW_FINAL_service.xsodata/PianiDiManutenzioneParameters(P_SWERK='CO05')/Results
    The service definition is :
    service {
    "EricssonItalgas/TEST_ZIIG_PDM_VIEW_FINAL.calculationview" as "PianiDiManutenzione" keys generate local "ID"
    parameters via entity;
    The SAP HANA AWS revision is 60.
    Someone could you help me,please?
    Thanks in advance.
    Dario.

    Hi Dario,
    Does the calculation view work without xsodata service? From the URL, your XS project name should be Project_DM, but from the xsodata source, the project name is EricssonItalgas. I'm confused with this. Did you use rewrite_rules or?
    Best regards,
    Wenjun

  • Error 1064 An exception occurred in the service when handling the control

    Hi all,
    I downloaded Oracle Business Intelligence 10.1.3.4.1 on windows XP successfully, once I try to start any service of Oracle BI [scheduler/server]. This error is shown *1064 An exception occurred in the service when handling the control request*.
    Could anyone help me out?
    Thanks in advance
    Maitha

    I checked the file
    [68008] Scheduler Error: [nQSError: 67042] The Scheduler Configuration is incorrect.
    [nQSError: 67004] Registry value for SchedulerScriptPath not set.
    How the issue can be resolved ?

  • Spry = Exception caught while loading data.xml [object Error]

    Exception caught while loading data.xml [object Error]
    I get this mistake message then I look in the Browser to my
    create html page with put in the xml file by Spry. All my xml files
    are not shows, its shows only the error massage.
    What can I do for the repair it?
    Thanks in advance for you answer and regards.

    Hi Jay,
    While in theory it should work offline, you have run into
    the main issue.
    IE7 has a security limitation that prevents the ActiveX
    control that does the XMLHttpRequest from working from the local
    file system.
    Without being about to control the viewing environment, you
    can't guarantee it will work in all instances.
    It will work if running off a web server (
    http://localhost or otherwise).
    I wouldn't recommend it for offline use unless you can
    control the usage.
    Let me know if you have further questions.
    Thanks,
    Donald Booth
    Adobe Spry Team

  • Exception caught while loading clients.xml: [object Error] in IE

    I’m following lesson 9 from Adobe Dreamweaver CS3
    Classroom in a Book which starts with viewing in a browser the
    final web page provided on the CD that comes with the book.
    The problem is that when I browse that file, IE 7 gives this
    error:
    quote:
    Exception caught while loading clients.xml: [object Error]
    Other browsers and versions of IE display the
    page fine.
    From Dreamweaver I ran Browser Compatibility check and it
    reported this:
    quote:
    Found 1 errors in external css files
    Affects: Firefox 1.5; Internet Explorer 6.0, 7.0; Netscape
    8.0; Opera 8.0, 9.0
    Found 2 errors in external css files
    Affects: Internet Explorer for Macintosh 5.2
    Found 3 errors in external css files
    Affects: Safari 2.0
    All errors point to this code from the same
    line:
    href="css/main.css
    and the whole line is:
    <link href="css/main.css" rel="stylesheet" type="text/css"
    media="screen" />
    I also ran validation of the file and it reported this:
    quote:
    2 The tag: "html" doesn't have an attribute: "xmlns:spry" in
    currently active versions.[XHTML 1.0 transitional]
    114 The tag: "div" doesn't have an attribute: "spry:region"
    in currently active versions.[XHTML 1.0 transitional]
    117 The tag: "th" doesn't have an attribute: "spry:sort" in
    currently active versions.[XHTML 1.0 transitional]
    118 The tag: "th" doesn't have an attribute: "spry:sort" in
    currently active versions.[XHTML 1.0 transitional]
    120 The tag: "tr" doesn't have an attribute: "spry:setrow" in
    currently active versions.[XHTML 1.0 transitional]
    120 The tag: "tr" doesn't have an attribute: "spry:select" in
    currently active versions.[XHTML 1.0 transitional]
    120 The tag: "tr" doesn't have an attribute: "spry:repeat" in
    currently active versions.[XHTML 1.0 transitional]
    120 The tag: "tr" doesn't have an attribute: "spry:odd" in
    currently active versions.[XHTML 1.0 transitional]
    120 The tag: "tr" doesn't have an attribute: "spry:hover" in
    currently active versions.[XHTML 1.0 transitional]
    128 The tag: "div" doesn't have an attribute:
    "spry:detailregion" in currently active versions.[XHTML 1.0
    transitional]
    129 The tag: "div" doesn't have an attribute: "tabindex" in
    currently active versions.[XHTML 1.0 transitional]
    134 The tag: "div" doesn't have an attribute:
    "spry:detailregion" in currently active versions.[XHTML 1.0
    transitional]
    143 The tag: "div" doesn't have an attribute:
    "spry:detailregion" in currently active versions.[XHTML 1.0
    transitional]
    The problem is that I don’t know what to do next and if
    and how this file can be fixed.
    Will appreciate greatly your help
    Thank you

    Another bump
    hoping the experts here might help if they check the files, I
    uploaded the project on a public site. You can download it from
    here:
    http://savefile.com/files/1452147
    at he bottom of the page click Download and on the next page
    at the bottom click Download file now
    These are the troubleshooting steps and solutions I
    attempted.
    After I ran check Browser Compatibility it showed problems
    located in main.css file
    I opened main.css and ran Browser Compatibility there too.
    The problems were listed as the following:
    Error Unsupported property: content
    Internet Explorer 6.0, 7.0; Internet Explorer for Macintosh
    5.2
    line 75 .clearfix:after { content: "."; display: block;
    height: 0; clear: both; visibility: hidden; }
    Error Unsupported property: zoom
    Firefox 1.5; Internet Explorer for Macintosh 5.2; Netscape
    8.0; Opera 8.0, 9.0; Safari 2.0
    line 82 .clearfix { zoom: 1; }
    Error Unsupported value: 'hand'
    Safari 2.0
    line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
    cursor: pointer; cursor: hand; }
    also lines 157
    Warning Unsupported value: 'hand'
    Firefox 1.5; Internet Explorer 6.0, 7.0; Internet Explorer
    for Macintosh 5.2; Netscape 8.0
    line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
    cursor: pointer; cursor: hand; }
    also lines 157
    I deleted unsupported properties and changed the unsupported
    value of hand to default and saved the main.css.
    Unfortunately IE still couldn't render the page showing the
    same error.
    I searched the CSS Advisor web site and even entire Google
    but except a few people reporting the same error no solution was
    posted.
    I also tied to contact the publisher of the book but I didn't
    get any replies with solutions yet.
    Since this is a learning project I'm trying to prepare myself
    for real live scenarios and wonder what experienced users would do
    when facing a similar problem if the project was for a client. What
    would you do. What is an acceptable practice? If you can't find a
    solution what would you say to your clients "well IE 7 can't render
    certain things from your page and there is nothing I can do about
    it"?
    I'll appreciate any input

  • 11g: Custom error handling for all application raised exceptions?

    Hi,
    the only thing I can find in the documentation regarding an error handler is this: http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/web_adv.htm#BABEHFHI (26.8)
    However, this kind of error handler seems to ignore exceptions thrown in backing beans and underlaying business logic inplemented in app modules.
    Is there a way to globaly handle those exceptions and show an error message if an exception is throw or is the only way a catch block in each backing bean method?
    Thanks

    So, If I understand correctly, the only option is to redirect to exception handler view and show eror informatin there.
    If, however, we want to present errors in popup messages, we have to handle exceptions in all backing bean's methods, e.g.:
    catch (Exception ex){
    handleError(ex);
    public void handleError(Exception ex){
    FacesContext fctx = FacesContext.getCurrentInstance();
    FacesMessage message=
    new FacesMessage(
    FacesMessage.SEVERITY_ERROR,
    "Error",
    ex.getMessage());
    fctx.addMessage(null,message);
    Is that correct?
    Thanks

  • Exception caught during processing mail message

    I am getting the following error in CC monitoring for my sender mail adpater:
    exception caught during processing mail message; java.io.IOException: invalid IMAP status response; not finding * STATUS, but 001I NO The requested item could not be found.
    Please tell me how to resolve ?

    NOw when i changed the protocol from IMap to POP3 the error is
    exception caught during processing mail message[18]; com.sap.aii.af.mp.processor.ModuleProcessorException: Error during processing local bean: localejbs/AF_modules/MessageTransformBean caused by: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at AF_modules, the whole lookup name is localejbs/AF_modules/MessageTransformBean.

  • Failed EAR deployment in WebLogic Server - Unexpected exception caught

    Hello
    I have a problem when deployment EAR file in WebLogic server, my application use KODO for persistence.
    This error only occurs when deployment from EAR file, when deployment from simple webapp directory the error not occurs.
    In properties variable load attributes of database connection from jdo.properties file
    PersistenceManagerFactory pmf = JDOHelper.getPersistenceManagerFactory(properties);
    javax.jdo.JDOFatalInternalException: Unexpected exception caught.
    at javax.jdo.JDOHelper.invokeGetPersistenceManagerFactoryOnImplementation(JDOHelper.java:1193)
    at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:808)
    at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:701)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:376)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:82)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1616)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2761)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:889)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:333)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
    at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:815)
    at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1222)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:433)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
    at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    NestedThrowablesStackTrace:
    java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at javax.jdo.JDOHelper$16.run(JDOHelper.java:1965)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.jdo.JDOHelper.invoke(JDOHelper.java:1960)
    at javax.jdo.JDOHelper.invokeGetPersistenceManagerFactoryOnImplementation(JDOHelper.java:1166)
    at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:808)
    at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:701)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:376)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:82)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1616)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:2761)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:889)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:333)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:26)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:154)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:566)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:136)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:104)
    at weblogic.deploy.internal.targetserver.operations.StartOperation.doCommit(StartOperation.java:139)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:320)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:815)
    at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1222)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:433)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:161)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:181)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:12)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:67)
    at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
    Caused by: <1.0.0-SNAPSHOT-SNAPSHOT fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdb
    c.kernel.KodoJDBCBrokerFactory". See the nested exception for details.
    at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:93)
    at kodo.jdo.PersistenceManagerFactoryImpl.getPersistenceManagerFactory(PersistenceManagerFactoryImpl.java:41)
    at kodo.jdbc.runtime.JDBCPersistenceManagerFactory.getPersistenceManagerFactory(JDBCPersistenceManagerFactory.java:22)
    ... 52 more
    Thanks for help.

    I managed to resolve the issue myself. Here are the details, in case anyone is interested:
    I modified the weblogic-application.xml (present under my application EAR>META-INF folder) to include org.hibernate.* and javax.persistence.* packages. Restarted the servers and redeployed the EAR (exploded). I don't see the errors anymore and the deployment was successful.
    <prefer-application-packages>
                <package-name>org.hibernate.*</package-name>
                <package-name>javax.persistence.*</package-name>
            </prefer-application-packages>

  • Exception caught by adapter framework: No configuration / default adapter specified for EDISeparator

    Hello Experts,
    I am configuring the scenario ( AS2 to EDISeparator and EDISeparator to IDOC ).
    Can you please help me with the error below which is from the either the EDISeparator Receiver channel or the EDISeparator Sender channle.
    09.06.2014 17:52:18.709
    Information
    Message is encrypted with 1.3.14.3.2.7 algorithm
    09.06.2014 17:52:18.778
    Information
    AS2 Message is signed with SHA1 (1.3.14.3.2.26) algorithm
    09.06.2014 17:52:18.779
    Information
    AS2 Message message signature is validated, signer ID is X509CertSelector: [ Serial Number: 1624063516 Issuer: CN=Mendelson AS2 TEST,OU=Integration,O=Mendelson,L=Berlin,ST=Unknown,C=GE matchAllSubjectAltNames flag: true ]
    09.06.2014 17:52:18.784
    Information
    AS2 document size is 350 Bytes
    09.06.2014 17:52:18.784
    Information
    Payload charset converted from ISO-8859-15 to ISO-8859-15
    09.06.2014 17:52:18.785
    Information
    B2B EdifactConverterModule : EDI format detected as EANCOM
    09.06.2014 17:52:18.785
    Information
    B2B EdifactConverterModule: Message will be read as ISO-8859-1.
    09.06.2014 17:52:18.785
    Information
    MP: processing local module localejbs/EdifactConverterModule
    09.06.2014 17:52:18.785
    Information
    0}: The module-paramteter "eancom.subversion.prefix" is not set. Using default value "false"
    09.06.2014 17:52:18.786
    Information
    0}: The module-paramteter "eancom..audit" is not set. Using default value "false"
    09.06.2014 17:52:18.791
    Information
    MP: processing local module localejbs/CallSapAdapter
    09.06.2014 17:52:18.791
    Information
    Application attempting to send an XI message asynchronously using connection AS2_http://sap.com/xi/XI/AS2
    09.06.2014 17:52:18.792
    Information
    Trying to put the message into the send queue
    09.06.2014 17:52:18.831
    Information
    Message successfully put into the queue
    09.06.2014 17:52:18.831
    Information
    The application sent the message asynchronously using connection AS2_http://sap.com/xi/XI/AS2. Returning to application
    09.06.2014 17:52:18.836
    Information
    MIC (DeJYUIusqQj6aaYRASdHhAo+4J0=) is calculated using SHA1 algorithm.
    09.06.2014 17:52:18.838
    Information
    The message was successfully retrieved from the send queue
    09.06.2014 17:52:18.843
    Information
    Message status set to DLNG
    09.06.2014 17:52:18.845
    Information
    MDN is succcessfully signed with SHA1 (1.3.14.3.2.26) algorithm
    09.06.2014 17:52:18.859
    Information
    Trying to put the message into the send queue
    09.06.2014 17:52:18.912
    Information
    Message successfully put into the queue
    09.06.2014 17:52:18.913
    Information
    The message was successfully retrieved from the send queue
    09.06.2014 17:52:18.918
    Information
    Message status set to DLNG
    09.06.2014 17:52:18.961
    Information
    Trying to put the message into the send queue
    09.06.2014 17:52:19.001
    Information
    Message successfully put into the queue
    09.06.2014 17:52:19.001
    Information
    The message was successfully retrieved from the send queue
    09.06.2014 17:52:19.006
    Error
    MP: exception caught with message No configuration / default adapter specified for EDISeparator
    09.06.2014 17:52:19.006
    Information
    Delivering to channel: B2BSE00002_O2C_ORDERS_VANS_PO_WRITE_EDISeparator
    09.06.2014 17:52:19.006
    Information
    Message status set to DLNG
    09.06.2014 17:52:19.009
    Error
    Exception caught by adapter framework: No configuration / default adapter specified for EDISeparator
    09.06.2014 17:52:19.010
    Error
    Transmitting the message to endpoint <local> using connection AS2_http://sap.com/xi/XI/AS2 failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: No configuration / default adapter specified for EDISeparator
    09.06.2014 17:52:19.015
    Information
    The asynchronous message was successfully scheduled to be delivered at Mon Jun 09 17:57:19 CEST 2014
    09.06.2014 17:52:19.015
    Information
    Message status set to WAIT

    Hello Ruchir Sinha and Dimitri Sannen,
    I think I have progressed a bit. Just unsure of the usage of the Module configuration .I now get a new error (see below) and the updated config details are :
    Sender Interface :
    Receiver Interface :
    Sender AS2 config :
    Receiver EDISeparator config :
    Sender EDISeparator config :
    Receiver IDOC config :
    IDoc details configured but not added in this document
    16.06.2014 11:52:35.414
    Information
    The message was successfully retrieved from the send queue
    16.06.2014 11:52:35.420
    Information
    Delivering to channel: B2BSE00002_O2C_ORDERS_VANS_PO_WRITE_EDISeparator
    16.06.2014 11:52:35.420
    Information
    MP: processing local module localejbs/ModuleProcessorExitBean
    16.06.2014 11:52:35.420
    Information
    Message entered AF MP exit bean and will now be passed to the JCA adapter
    16.06.2014 11:52:35.420
    Information
    Message status set to DLNG
    16.06.2014 11:52:35.433
    Information
    UNA segment UNA found
    16.06.2014 11:52:35.444
    Information
    Parsed UNB segment 333333333/014 to 111111111/014
    16.06.2014 11:52:35.445
    Information
    Parsed UNH segment ORDERS D96A
    16.06.2014 11:52:35.514
    Information
    Searching sender channel for Eancom message part message with Message type ORDERS, Message version number D, Message release number 96A, Interchange sender identification 333333333, Interchange sender identification code qualifier 014, Interchange recipient identification 111111111, Interchange recipient identification code qualifier 014, Message Subversion EAN008, Message Agency UN
    16.06.2014 11:52:35.579
    Information
    Sender channel (Channel) keys: ObjectId=7abf551ddbb638268f91af80ec1c04c8 values: ToPartySchema= Attributes=(Attributes:Channel:EDISeparator:INBOUND) values: edisep.advanced=false snd.interchangeSenderId=.* snd.tradacommessagetype=.* snd.xpath= snd.xpath.value= snd.filterCondition=equal snd.edifactMessageReleaseNumTxt= snd.tradacomMessageTypeUsingFreeText=false snd.eancomMessageReleaseUsingFreeText=false snd.eancomMessageVersionFreeText= snd.odetteMessageType=.* snd.edifactMessageVersion=.* snd.xml.splitPath=null snd.eancomMessageVersion=.* snd.odetteMessageVersion=.* snd.edifactMessageRelNumUsingFreeText=false snd.otherVersionReleaseIndustryIdentifierCodeEnabled=false adapterStatus=active snd.vdaMessageType=.* snd.eancomCONTRLMessageRelease=3 snd.odetteMessageTypeTxt= snd.tradacommessageversion=.* snd.edifactMessageVerNumUsingFreeText=false snd.edifactMessageTypeUsingFreeText=false snd.xpathUsingFreeText=false snd.interchangeSenderIdCode=.* snd.otherVersionReleaseIndustryIdentifierCode=.* snd.odetteMessageTypeUsingFreeText=false snd.tradacomreccode=.* snd.edifactMessageVersionFreeText= snd.edifactInterchangeRecipientIdentification=.* eoio.sequenceId= snd.edifactMessageTypeTxt= snd.odetteMessageVerNumUsingFreeText=false snd.eancomMessageVerNumUsingFreeText=false snd.interchangeReceiverId=.* snd.eancomMessageRelease=.* snd.tradacomsendername=.* snd.tradacomMessageTypeTxt= snd.vdaLieferantenNummer=.* snd.interchangeReceiverIdCode=.* snd.edifactInterchangeSenderIdentificationCode=.* snd.odetteMessageVersionFreeText= snd.versionReleaseIndustryIdentifierCode=.* snd.edifactInterchangeSenderIdentification=.* snd.edifactMessageType=.* snd.eancomMessageType=.* snd.xpathTxt= snd.vdaMessageTypeTxt= deliverySemantics=eo snd.eancomMessageReleaseTxt= snd.plainmessagetype=.* snd.xml.split=false snd.edifactMessageRelease=.* snd.vdaMessageTypeUsingFreeText=false snd.tradacomrecname=.* edisep.addParameterParams=TableData: edisep.addParameterParams {} snd.encoding=iso885915 snd.vdaKundenNummer=.* snd.tradacomsendercode=.* snd.edifactCONTRLMessageRelease=3 snd.edifactInterchangeRecipientIdentificationCodeQualifier=.* snd.transactionSetIdentifierCode=.* Service=ASJAVA_DX5 Channel=B2BSE00002_O2C_ORDERS_PO_ECC_READ_EDISeparator EngineType=CA Party= TransProt=XI TransProtVers=1.0.0 FromPartySchema= FromPartyAgency= Direction=I MsgProt=EANCOM MsgProtVers=1.0.0 EngineName= AdapterType=EDISeparator AdapterSWCV=06c536e6fafe11e0bb1cea8f0a4290b1 ToPartyAgency= AdapterNamespace=http://sap.com/xi/XI/EDISeparator found. New message ID is f18894a8-f53b-11e3-a748-00001e96c7e2
    16.06.2014 11:52:35.586
    Error
    MP: exception caught with cause javax.resource.ResourceException: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
    16.06.2014 11:52:35.586
    Error
    Message could not be forwarded to the JCA adapter. Reason: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
    16.06.2014 11:52:35.590
    Error
    Exception caught by adapter framework: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
    16.06.2014 11:52:35.591
    Error
    Transmitting the message to endpoint <local> using connection AS2_http://sap.com/xi/XI/AS2 failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule

Maybe you are looking for