Exception condition "NO_FIELDCATALOG_AVAILABLE" raised in an alv grid.
Hi.
I saw other threadhs with this problem, and in each ones somebody explained how to use the fieldcatalog.
In this case I wish to know why I can't use the structure name.
The code is at the bottom. I'm working with a rel. 4.6c.
I'm sure that when I call the method set_table_for_first_display the internal table is full.
What is wrong?
Exception condition "NO_FIELDCATALOG_AVAILABLE" raised.
A RAISE statement in the program "CL_GUI_ALV_GRID===============CP " raised the
exception
condition "NO_FIELDCATALOG_AVAILABLE".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
TYPES: BEGIN OF tipo_errors,
Tipo_errore(10),
chiave(8),
agagt(3),
key(7),
kunnr(6),
percinc(5),
Messaggio(100),
vbeln type VBELN,
posnr type POSNR,
agente type ZPVAGENTE,
bukrs type BUKRS,
vkorg type VKORG,
END OF tipo_errors.
DATA: alv_grid_errori TYPE STANDARD TABLE OF tipo_errors.
CALL METHOD r_alv_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'TIPO_ERRORS'
CHANGING
it_outtab = alv_grid_errori
EXCEPTIONS
OTHERS = 4.
So, the final answer is: "I must use the field catalog" ...
Thanks.
Regards.
Massimiliano
Similar Messages
-
Getting a dump Exception condition "CNTL_ERROR" raised in ALV
Hi ,
I have a requirement where I have to do drag and drop operation of TOs from one queue to another queue in an ALV tree between nodes. The drag and drop operation is working fine, but suddenly i get a dump lilke * Exception condition "CNTL_ERROR" raised* .
A RAISE statement in the program "CL_GUI_CFW====================CP" raised the
exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
This dump is occuring from a customized transaction ZLRF1 ... where I copied all the includes from the LRF1. So, i will not be able to use any note. Can any1 please help me to resolve this issue <removed by moderator>
Edited by: Thomas Zloch on Sep 15, 2011 1:46 PMSince you're saying you made a copy of all the includes to their corresponding zincludes, in the following includes
ZLLRFMONTOP
replace LRF1 with ZLRF1 and make sure the following includes are activated
ZLLRFMONCLA
ZLLRFMONTOP -
Exception condition "CNTL_ERROR" raised - Error in ITS
Dear all
I have created ITS link for Solman - Solar02 t.code When I was trying to upload document in Solar02 using ITS (both using ITS from Solman SICF service, I am getting a dump error,
Exception condition "CNTL_ERROR" raised.
But when i was uploaded in sapgui, it uploaded.
Let me know the solution for this?This kind of error usually points to the incorrect use of Enjoy SAP controls like ALV, Text Edit, HTML viewer etc. They make use of a framework which can only be handled in the standard SAP GUI and not in WebBased applications. So I guess you will have to come up with something else, because I don't think this is going to work like this.
-
Short Dump, Exception condition "NOT_EXIST" raised
Dear Colleagues!
I am having a problem with short dump, I am getting the message Exception condition "NOT_EXIST" raised.
I am trying to load data to ODS with full load and filtering via a DTP.
In the monitoring the load doesn't even get started.
I have already loaded data succesfully in this ODS... But now it doesn't work anymore..
I also tried to replicate and active all the rules and objects again.
And in the source system if I test the extractor it works fine.
I saw an earlier thread on this issue, and it recommended programs ZDMDELTAREPAIR or RSBDELTAREPAIR, but this thread was especially for BW 3.5. We are using 7.0 and have SP10. Are these programs still valid or is there another note for 7.0?
Hope you can help!
Regards Silje
Does anyone have any ideas?
regards, UrosHi again,
I tried RSBDELTAREPAIR and it worked!
Thanks to the forum again!
Silje -
"Exception condition "CONTROL_FLUSH_ERROR" raised." during background jobs
hi all,
the program ZTEST is used for downloading a txt file into D: using GUI_DOWNLOAD. this program works fine but when I schedule this porgam in background jobs in tcode SM36 using "job wizard", i am getting errors as Exception condition "CONTROL_FLUSH_ERROR" raised and the error analysis is as
'A RAISE statement in the program "SAPLSFES " raised the exception condition "CONTROL_FLUSH_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.'
How to rectify this error???
points will be rewrded
thanks in advanceGUI_DOWNLOAD is a FM that is designed to download files by interation with the PC directories (only possible in foreground). If the file download is the requirement the u can use application server files for it.
But if you are insisting on notepad and excel documents, then you have to use CLIP and EXECUTE function modules. Refer to Class CL_GUI_FRONTEND_SERVICES that has all the required methods -
Exception condition "CONVERSION_ERROR" raised.
Hi,
We have been getting short dumps in our production system daily. I was unable to locate the problem by looking at the dump. The dump says that CONVERSION_ERROR raised.
Which application raised this exception? Again no clue on the same. Please find the text of the dump.
Short text
Exception condition "CONVERSION_ERROR" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_SWF_CNT_CONTAINER==========CP" raised the
exception
condition "CONVERSION_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_SWF_CNT_CONTAINER==========CP" or "CL_SWF_CNT_CONTAINER==========CM02J"
"IF_SWF_CNT_CONVERSION~TO_XML"
or
"CL_SWF_CNT_CONTAINER==========CP" "CONVERSION_ERROR"
or
"SAPMSSY1 " "CONVERSION_ERROR"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "zacwtbsrv0
Network address...... "10.27.191.
Operating system..... "Windows NT
Release.............. "5.2"
Hardware type........ "4x AMD64 L
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 9
Shortdump setting.... "full"
Database server... "ZACWTBSRV063"
Database type..... "MSSQL"
Database name..... "EP1"
Database user ID.. "ep1"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 21 2008 00:12:39"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 157
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 16384
MM Used. 8164576
MM Free. 212256
User and Transaction
Client.............. 100
User................ "WF-BATCH"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "FB565CDDF6D0F1BFA292001E0B5D7336"
Program............. "CL_SWF_CNT_CONTAINER==========CP"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "EP1"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........."0A1BBF4011A4488D408222BD"
Outbound Queue Name.." "
Client.............. 100
User................ "HPRETORIUS"
Transaction......... " "
Call Program........."SAPLERFC"
Function Module..... "ARFC_DEST_SHIP"
Call Destination.... "WORKFLOW_LOCAL_100"
Source Server....... "zacwtbsrv064_EP1_00"
Source IP Address... "10.27.191.64"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "CL_SWF_CNT_CONTAINER==========CP" -
in "IF_SWF_CNT_CONVERSION~TO_XML".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 67
of the (Include) program "CL_SWF_CNT_CONTAINER==========CM02J".
Source Code Extract
Line SourceCde
37 lv_xml_table_req = 'X'.
38 ENDIF.
39 IF xml_stream IS REQUESTED.
40 lv_xml_stream_req = 'X'.
41 ENDIF.
42
43 IF use_xslt NE space.
44
45 cl_swf_cnt_conversion_service=>to_xml_xslt(
46 EXPORTING
47 container = me
48 include_null_values = include_null_values
49 include_initial_values = include_initial_values
50 include_change_data = include_change_data
51 include_texts = include_texts
52 include_extension_elements = include_extension_elements
53 save_delta_handling_info = save_delta_handling_info
54 xml_dom_req = lv_xml_dom_req
55 xml_table_req = lv_xml_table_req
56 xml_stream_req = lv_xml_stream_req
57 IMPORTING
58 xml_dom = xml_dom
59 xml_table = xml_table
60 xml_stream = xml_stream
61 xml_rendered_size = xml_rendered_size
62 EXCEPTIONS
63 conversion_error = 1
64 OTHERS = 2
65 ).
66 IF sy-subrc <> 0.
>>>> RAISE conversion_error.
68 ENDIF.
69
70 ELSE.
71
72 cl_swf_cnt_conversion_service=>to_xml_ixml(
73 EXPORTING
74 container = me
75 include_null_values = include_null_values
76 include_initial_values = include_initial_values
77 include_typenames = include_typenames
78 include_change_data = include_change_data
79 include_texts = include_texts
Could you please help me out in resolving this issue?
Is there any need to apply any OSS notes?
Thanks in advance. And reward points will be given for the solution..
Thanks,
Ravikumar.Hi,
U will receive this error when ever it is not possible to achieve runtime conversion.
i.e When u r passing the data from one type variable to another type if the conversion is not defined or not possible u will get this dump. Just analyze the dump in ST22.
Look at this simple example. Here i am trying to assign 101.23 to l_p for which length is not sufficient. So i will get dump. But if u do the same with character variable it will truncate the data.
DATA: l_p(2) TYPE P DECIMALS 2.
l_p = '103.23'.
WRITE l_p.
So check the place where u r getting the dump. It must be some assignment statement.
Hope it gave some idea on ur case.
Thanks,
Vinod. -
Exception condition "FAILED" raised.
My TRM functional consultant has been trying to run end of day processes in the Transaction RKLNACHT but the following dump appears:
Runtime Errors RAISE_EXCEPTION
Date and Time 16.05.2008 10:33:21
Short text
Exception condition "FAILED" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_POSITIONSERVICE_TRQ========CP" raised the
exception
condition "FAILED".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_POSITIONSERVICE_TRQ========CP" or "CL_POSITIONSERVICE_TRQ========CM00I"
"GET_POSITIONS_BY_DIFF"
or
"CL_POSITIONSERVICE_TRQ========CP" "FAILED"
or
"RKLNACHT " "FAILED"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "tetradev"
Network address...... "192.168.1.81"
Operating system..... "SunOS"
Release.............. "5.9"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "tetradev"
Database type..... "ORACLE"
Database name..... "DEV"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 31 2006 20:59:23"
create on........ "SunOS 5.9 Generic_117171-13 sun4u"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 75
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 16759392
Heap.... 0
Page.... 180224
MM Used. 10608952
MM Free. 1957592
User and Transaction
Client.............. 300
User................ "DARLINGTON"
Language key........ "E"
Transaction......... "KLNACHT "
Program............. "CL_POSITIONSERVICE_TRQ========CP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "CL_POSITIONSERVICE_TRQ========CP" -
in "GET_POSITIONS_BY_DIFF".
The main program was "RKLNACHT ".
In the source code you have the termination point in line 37
of the (Include) program "CL_POSITIONSERVICE_TRQ========CM00I".
Source Code Extract
Line SourceCde
7 l_selector TYPE REF TO cl_flow_selector_dif,
8 * workarea for table with positions
9 l_tab_position TYPE trqy_position_obj,
10 l_position TYPE REF TO if_position_trq,
11 l_count type i.
12
13 * initialization
14 CLEAR re_tab_position.
15
16 * Get positions for ranges
17 CALL METHOD ca_pos_identifier_dif=>agent->get_persistent_by_range
18 EXPORTING
19 im_context = trqco_con_trq
20 im_ranges = im_ranges
21 RECEIVING
22 re_identifiers = l_tab_identifier.
23 CHECK NOT l_tab_identifier IS INITIAL.
24
25 LOOP AT l_tab_identifier INTO l_identifier.
26
27 l_selector = l_identifier->derive_selector( ).
28
29 * get TRQ positions for selectors
30 CALL METHOD read_positions_by_selector
31 EXPORTING
32 im_selector = l_selector
33 RECEIVING
34 re_tab_positions = l_tab_position.
35 DESCRIBE TABLE l_tab_position LINES l_count.
36 IF l_count <> 1.
>>>>> raise failed.
38 ENDIF.
39 APPEND LINES OF l_tab_position TO re_tab_position.
40 ENDLOOP.
41
42 ENDMETHOD.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 2
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE End-of-Day Processing
SY-MSGTY E
SY-MSGID 64
SY-MSGNO 030
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080516
SY-UZEIT 103319
SY-XPROG SAPLSBAL_DB
SY-XFORM %_CONTROL_EXIT_DYNPRO
Does anyone have suggestions as to how I can solve this problem?
Assistance will be appreciated.bumping...any suggestions...welcome
-
Error in BEx Analyzer Exception condition "HIERARCHY_NOT_FOUND" raised.
When i run report 0FIAA_C02_Q1001 with input variable as "My controlling area" i get this error.
ERROR:
Exception condition "HIERARCHY_NOT_FOUND" raised.
ERROR Analysis:
A RAISE statement in the program "SAPLRRH1" raised the exception
condition "HIERARCHY_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Please sugggest how to resolve this.
HOw to see which hierarachy it is talking about?
Thanks,
Harika.
Edited by: harikag on Oct 12, 2011 7:11 AM
Edited by: harikag on Oct 12, 2011 7:12 AMHI
FOr 0Costcenterinfoobject->attribute tab->no hierarhcies
->hierarchy tab->i see hierarchy tables are enabled.But when i click on
"MaintainHierachy" there are no hierrachies in it.
For 0CO_AREA infoobject->attribute tab->0CCA_HIENM,0PCA_HIENM hierarchies are there.
->hierarchy tab->nothing is there.
please help out.I didnt load 0COSTELMNT_0102_HIER master datasource in CO_IO.
Is that the reason? -
Exception condition "CNTL_ERROR" raised. in WDA : smartform to pdf
Hii,
I am using a webdynpro - abap application. I am showing a smartform as a pdf in one on the windows.
When the link in the main window is clicked, a secondary window. Instead of the pdf, I get following exception.Kindly help me understand, where would I be going wrong. Let me know if more details required.
*Exception condition "CNTL_ERROR" raised. *
Form: PBO_HTML_CONTROL of program SAPLSTXBC
Module: HTML_CONTROL of program SAPLSTXBC
Function: SSFCOMP_PDF_PREVIEW of program SAPLSTXBC
Method: DISPLAYPDF of program /1BCWDY/2TKFRFPNZA4CZYBGEB8F==CP
Method: IF_COMPONENTCONTROLLER~DISPLAYPDF of program /1BCWDY/2TKFRFPNZA4CZYBGEB8F==CP
Method: ONACTIONPDF of program /1BCWDY/2TKFRFPNZA4CZYBGEB8F==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/2TKFRFPNZA4CZYBGEB8F==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
The code in the DISPLAYPDF method is as follows:
method DISPLAYPDF .
DATA: I_RS38L_FNAM TYPE RS38L_FNAM.
DATA: CTRL TYPE SSFCTRLOP.
DATA: OUT TYPE SSFCOMPOP.
DATA: I_SSFCRESCL TYPE SSFCRESCL.
DATA: LT_OTFDATA TYPE TABLE OF ITCOO.
CTRL-GETOTF = 'X'.
CTRL-NO_DIALOG = 'X'.
CTRL-PREVIEW = 'X'.
OUT-TDNEWID = 'X'.
OUT-TDDELETE = ' '.
data: i_tsp03 type tsp03.
clear i_tsp03.
select single * from tsp03 into i_tsp03.
*OUT-TDDEST = i_tsp03-PADEST.
OUT-TDDEST = 'TEP1'.
********get context data
DATA lo_nd_zwebquestionaire TYPE REF TO if_wd_context_node.
DATA lo_el_zwebquestionaire TYPE REF TO if_wd_context_element.
DATA ls_zwebquestionaire TYPE wd_this->element_zwebquestionaire.
* navigate from <CONTEXT> to <ZWEBQUESTIONAIRE> via lead selection
lo_nd_zwebquestionaire = wd_context->get_child_node( name = wd_this->wdctx_zwebquestionaire ).
* get element via lead selection
lo_el_zwebquestionaire = lo_nd_zwebquestionaire->get_element( ).
* get all declared attributes
lo_el_zwebquestionaire->get_static_attributes(
IMPORTING
static_attributes = ls_zwebquestionaire ).
********get context data ends
data: itab1 type TCHAR255.
data: itab2 type TCHAR255.
data: itab type zprint. "addition by chandani
data fm_name type rs38l_fnam..
clear fm_name.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZCPESMARTFORM'
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
CALL FUNCTION fm_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = CTRL
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
OUTPUT_OPTIONS = OUT
USER_SETTINGS = ' '
NAME = 'test'
ZWEBQUESTIONAIRE = ls_ZWEBQUESTIONAIRE
IMPORTING
* DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = I_SSFCRESCL
* JOB_OUTPUT_OPTIONS =
TABLES "addition by chandani
itab = itab "addition by chandani
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH LT_OTFDATA.
LT_OTFDATA[] = I_SSFCRESCL-OTFDATA[].
CALL FUNCTION 'SSFCOMP_PDF_PREVIEW'
EXPORTING
I_OTF = LT_OTFDATA
* EXCEPTIONS
* CONVERT_OTF_TO_PDF_ERROR = 1
* CNTL_ERROR = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA: PDF_DATA TYPE XSTRING,
PDF_SIZE TYPE I.
DATA: L_DUMMY TYPE STANDARD TABLE OF TLINE.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
* MAX_LINEWIDTH = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = PDF_SIZE
BIN_FILE = PDF_DATA
TABLES
OTF = LT_OTFDATA
LINES = L_DUMMY
* EXCEPTIONS
* ERR_MAX_LINEWIDTH = 1
* ERR_FORMAT = 2
* ERR_CONV_NOT_POSSIBLE = 3
* ERR_BAD_OTF = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA lo_nd_pdf TYPE REF TO if_wd_context_node.
DATA lo_el_pdf TYPE REF TO if_wd_context_element.
DATA ls_pdf TYPE wd_this->element_pdf.
DATA lv_sources LIKE ls_pdf-sources.
* navigate from <CONTEXT> to <PDF> via lead selection
lo_nd_pdf = wd_context->get_child_node( name = wd_this->wdctx_pdf ).
* get element via lead selection
lo_el_pdf = lo_nd_pdf->get_element( ).
* get single attribute
lo_el_pdf->Set_attribute(
EXPORTING
name = `SOURCES`
value = PDF_DATA ).
endmethod.Hi,
1) This error generally comes ,when your GUI version is old.Check this point & try to upgrade.
2) Otherwise if you are running report in background,then check madhu kumar's reply in this link & try like this.
Dump Error Raise_Exception CNTL_ERROR
Also search OSS notes.
Thanks
Gourav. -
Exception condition "HIERARCHY_NOT_FOUND" raised. - SAPLRRHI
Hello all,
My issue is very similar as the one described in thread : HIERARCHY_NOT_FOUND, but not solved in the other thread.
I tried to update the system to SP21 as told in the topic, but the issue is still present :
when I open a query with the query designer, I'm still having the same issue. Via the RSRT transaction I get the following error message :
Short text
Exception condition "HIERARCHY_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
Error analysis
A RAISE statement in the program "SAPLRRHI" raised the exception
condition "HIERARCHY_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Trigger Location of Runtime Error
Program SAPLRRHI
Include LRRHIU27
Row 36
Module type (FUNCTION)
Module Name RRHI_ASOHIEDIR_READ
I add that the query use a 0cust_sales based hierarchy, when (at the query level) I remove the time dependance the query works fine, but when I select "type of derivation" in the hierarchy display and use 0D_FC_LM1 : I get the error.
(transaction RSTHJTMAINT--> 0D_FC_LM1 based on 0calmonth and use "first day)
Thanks in advance for help.First of all, thanks Maxim to spend time on my issue, it is really appreciated (and sorry for the late answer, I did not have any computers during the week-end).
I checked both tables (SE16 then "number of entries" button) : RSHIEDIR has 5 entries and RSRHIEDIR_OLAP has 9.
So I go to my info-object 0cust_sales, hierarchy tab, "maintain hierarchy" button and reactivate the hierarchy (I only have one line available) and I get the message "There is no modified version for this hierarchy." When I check again the entries number in both tables : no change, (still 5 and 9).
Please find bellow the abap code I get with the message (when I use RSRT) :
Source Code Extract
Line SourceCde
6 *" EXPORTING
7 *" REFERENCE(E_S_HIEDIR) TYPE RRHI_S_HIEDIR
8 *" EXCEPTIONS
9 *" HIERARCHY_NOT_FOUND
10 *"----
11 data: l_hiesid type rrhi_hiesid,
12 l_TMPJOIN type rs_bool.
13
14 CALL FUNCTION 'RRHI_HIESIDASO_GET'
15 EXPORTING
16 i_hiesid = i_hiesid
17 IMPORTING
18 E_HIESID_ASO = l_hiesid.
19
20 if l_hiesid < 0.
21 l_tmpjoin = rs_c_false.
22 else.
23 l_tmpjoin = rs_c_true.
24 endif.
25
26 CALL FUNCTION 'RRHI_HIEDIROLAP_READ'
27 EXPORTING
28 i_hiesid = l_hiesid
29 I_TMPJOIN = l_tmpjoin
30 IMPORTING
31 E_S_HIEDIR = E_S_HIEDIr
32 EXCEPTIONS
33 hierarchy_not_found = 1.
34
35 if sy-subrc <> 0.
>>>>> raise hierarchy_not_found.
37 endif.
38
39 ENDFUNCTION.
Thanks again and please let me know if you need more informations. -
Exception condition "CONFIG_NOT_FOUND" raised.
Hi,
I am trying to create an Opportunity in CRM 7.0 WEB UI. The moment i click on the create opportunity, i am getting a pop window, showing the transaction types which i have created in spro. But when i am selecting any one of them, i am getting a dump error mention in the subject matter.
I did ST22 & checked the notes on service marketplace based in the description, but could not find anything relevant to this error.
Here is, what i am getting the dump
Error when processing your request
What has happened?
The URL http://uapkb2dc.gep.ge.com:8028/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
The following error text was processed in the system CS1 : Exception condition "CONFIG_NOT_FOUND" raised.
The error occurred on the application server uapkb2dc_CS1_28 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_BSP_DLC_CONFIGURATION~GET_CONFIG_DATA of program CL_BSP_DLC_CONFIGURATION2=====CP
Method: GET_XML of program CL_CHTMLB_CONFIG==============CP
Method: IF_BSP_ELEMENT~DO_AT_BEGINNING of program CL_CHTMLB_CONFIG==============CP
Method: ONLAYOUT of program CLO247JT6QHPYQHQ33T513E8SHV84CP
Method: %_ONLAYOUT of program CL_O247JT6QHPYQHQ33T513E8SHV84CP
Method: DO_REQUEST of program CL_BSP_PAGE===================CP
Method: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Method: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
Method: PROCESS_VIEW of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: DO_REQUEST of program CL_BSP_WD_VIEW_CONTROLLER=====CP
I am not able to find the solution on this & i would appreciate of someone can help me fixing this.
What i did is, I tried to add certain fields from "Configure Page Button" & added certain fields to right column. Since then, i am getting this error. I do not how to remove those.Hi,
Go to transaction BSP_WB_CMPWB and open the compoenent BT111H_OPPT.
Select the view you have modified and click on configuration tab. click on edit and select the custom config
you have created.either you can remove the entries you have added which caused the dump or if you are not sure delete the
custom configuration.This should fix the issue.
Thanks,
Rajiv. -
Exception Condition "Fatal_Error" Raised in SMQ2
Hi,
I am doing File to Proxy(ECC) Asynchronous scenario. in this getting the error in Target side(ECC) in SMQ2 message is showing error , when I double click on this error getting the error message like Exception Condition "Fatal_Error" Raised.
Because of this interface error Remaining interfaces also getting failure.
these interfaces was working fine.
I searched in SDN, but i didn't get proper solution for related to this issue.Pl suggest us to resolve this issue.
Regards,
PasiHi Pasi,
This looks like a data issue which has resulted in an exception in Proxy code. If this is not a production system I will suggest you to delete the error entry from queue and test with an older successful data and see whether it gets successfully executed or not.
Or you can try to debug the proxy code, with XML structure (taken from SXMB_MONI of PI) and see where the exception is raised
Regards
Suraj -
Exception condition "NO_TRIGGER_INSTANCE" raised error in SMQ2
Dear all,
i'm getting this error in SMQ2 transaction of xi server.
Exception condition "NO_TRIGGER_INSTANCE' raised
Did anyone encounter this issue before. Pls share your inputs in resolving it,
Regards,
JackHi ,
Can you provide the details of this dump from ST22 for understanding .
Regards ,
Hanumant . -
I wrote a function.This read codes from a .txt file, create an abap program dinamically and after run it.
I wrote a java program with jco and i wrote an abap program for calling function .İf i runned abap program not happened any problem.But i runned java program.i saw this error :
RFC_ERROR_SYSTEM_FAILURE: Exception condition "CNTL_ERROR" raised.
My function :
FUNCTION Z_MS_FUNC2.
*"*"Local Interface:
*" IMPORTING
*" EXPORTING
*" VALUE(RESULT) TYPE ZMS_SONUC-SONUC
DATA: code TYPE TABLE OF rssource-line.
data : p_file TYPE string.
p_file = 'C:\deneme.txt'.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
FILETYPE = 'ASC'
tables
data_tab = code.
INSERT REPORT 'zms_dinamik002' FROM code.
SUBMIT zms_dinamik002 AND RETURN.
result = 'Successfull.'.
ENDFUNCTION.
this code show error row :
38 CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_LIST_FILES
39 EXPORTING
40 DIRECTORY = FILE
41 FILTER = ''
42 FILES_ONLY = 'X'
43 * DIRECTORIES_ONLY = 'X'
44 CHANGING
45 FILE_TABLE = filetab
46 COUNT = count
47 EXCEPTIONS
48 CNTL_ERROR = 1
49 DIRECTORY_LIST_FILES_FAILED = 2
50 WRONG_PARAMETER = 3
51 ERROR_NO_GUI = 4
52 others = 5.
53
54 IF SY-SUBRC <> 0.
>>>>> RAISE CNTL_ERROR.
56 ENDIF.
deneme.txt
report mehmet.
data wa like zms0005.
wa-jop_id = 14.
wa-jop_name = 'UZAK4'.
modify zms0005 from wa.Hi,
wa-jop is not defined (data: wa-jop type...)!
Try to insert the coding-lines in a new report. Than make a syntax check.
Regards Mario
Edited by: Mario Müller on Mar 11, 2008 6:47 AM -
Error while processing dimension: "Exception condition "X_MESSAGE" raised"
Hi,
I have recently transported an Appset from development to production environment. The transport finished successfully, without any error.
Then I update the members of the dimensions and I process it (Production Environment). I get "Exception condition "X_MESSAGE" raised."
I need to solve this problem as soon as possible.
Regards,
Miguel.check the below link
Re: Dump when doing selective deletion
Maybe you are looking for
-
How to work with images in Keynote
Hello, I'm a Keynote newbie and am having problems working with images. My basic question is, do I have to resize my .jpgs every time I put them in Keynote? It seems that if I choose to Insert>Choose a .jpg, it will fill my entire presentation and I
-
"Notes" making duplicates in my gmail account
This is my first Macbook or Mac Computer I've ever owned, and thought it was awesome that my notes synced with my gmail account. Except now, after upgrading to Mountain Lion there is always a folder in my trash labeled recovered items or somethi
-
Duplicate invoice lists created for same bill
Dear All, Our system is generating multiple invoice lists for the same bill every time we do a VF21 on it...is this a standard functionality? How do we control it not to have multiple invoice list for the same bill i.e. if an invoice list is already
-
To add new file type in SharePoint
Hi, I am trying to add new file type for sharepoint site like MSWord, PDF etc., Are there any ways to create new file types in SharePoint? My requirement is to create a file type for AutoCAD drawings (.dwg format). Please note, we are using SharePoin
-
Opatch lsinventory command not working
Hello everyone ; DB VERSION : 10.2.0.4.0 OS : OEL 5.5 Where can i get installed patch details on my database ? $ pwd /u01/app/oracle/product/10.2.0/db_1/OPatch $ opatch lsinventory bash: opatch: command not found opatch lsinventory -details bash: