Exception CX _ OS _ OBJECT _ NOT _ FOUND in Actions

Hi
      Iam executing an action which will confirm the product from Contracts Screen(CRM_ORDER). The confirmation is also being done. But after the confirmation is done,the above exception is being triggered and dump is being achieved. Is there any way to avoid the above dump. This dump comes from SAP Standard code.
Regards
Hari

Hello harish reddy  , I had your same problem, I resolved by implementing the following note: 1016242, see if you solve the problem?
A greeting
Daniele

Similar Messages

  • Webdynpro - Object could not be found in cache, key is null

    Folks
    I am getting this marvelous exception for which I am not able to find any not in SAP Service Portal as well. Any insights shared will be highly appreciated.
    [EXCEPTION]
    com.sap.tc.webdynpro.services.sal.util.cache.ResourceNotFoundException: Object could not be found in cache, key is null!... [see details]
    EXCEPTION]
    com.sap.tc.webdynpro.services.sal.util.cache.ResourceNotFoundException: Object could not be found in cache, key is null!
    at com.sap.tc.webdynpro.services.sal.util.cache.WebResourceCache.getResource(WebResourceCache.java:108)
    at com.sap.tc.webdynpro.services.sal.util.cache.WebResourceCache.getResource(WebResourceCache.java:134)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.datatransport.DataTransportFactory.getOutputMassDatasource(DataTransportFactory.java:93)
    at com.sap.tc.webdynpro.services.sal.datatransport.core.InternalMassDataTransport.getOutputMassDatasource(InternalMassDataTransport.java:50)
    at com.sap.tc.webdynpro.progmodel.context.ModifiableBinaryType.parse(ModifiableBinaryType.java:133)
    at com.sap.tc.webdynpro.clientserver.data.DataContainer.doParse(DataContainer.java:1434)
    at com.sap.tc.webdynpro.clientserver.data.DataContainer.validatePendingUserInput(DataContainer.java:1324)
    at com.sap.tc.webdynpro.clientserver.data.DataContainer.validatePendingUserInput(DataContainer.java:681)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.validate(ClientComponent.java:715)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doValidate(WindowPhaseModel.java:326)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:120)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

    Is the system 6.40 release ? Have you referred to SAP Note 923694  ?
    Search in SAP Notes for 'Importing A Web Dynpro Hot Fix', find the one relevant for your SP level and make sure you have implemented those fixes if you find one for the SP.
    Hope this helps
    Regards,
    Snehal

  • File Upload Error : Object could not be found in cache, key is null!

    I am having this problem. when I attach a file and press submit button, it gave me
    "Object could not be found in cache, key is null !"
    In my ViewController context I have Invoice_DOC attribute (binary, fileupload)
    and that is mapped to ComponentContoller.attribute(INVOICE_DOC).
    here is wdDoInit() method of my view controller..
    public void wdDoInit()
        IWDAttributeInfo attInfo =
              wdThis.wdGetDemurrageCompController().wdGetContext ().nodeSubmitElements().getNodeInfo().getAttribute(IPrivateDemurrageComp.ISubmitElementsElement.INVOICE_DOC);
    IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType) attInfo.getModifiableSimpleType();
    Any Idea why I am having this..
    I went through some tutorials, The controller node has cardinality of 1..1...

    Hi,
    Could you please try with the following code. Here I have an Action for file uploading.
    public void wdDoInit()
    //@@begin wdDoInit()
    // get attribute info for context attribute "FileResource"
    IWDAttributeInfo attributeInfo =
    wdContext.getNodeInfo().getAttribute(
    IPrivateFileUploadView.IContextElement.FILE_RESOURCE);
    // make the context attribute's simple type modifiable.
    // Only with this line of code the binary data (stored within the
    // context attribute) can be parsed. The Web Dynpro Runtime stores
    // the mime-object’s metadata within the attribute’s type metadata.
    attributeInfo.getModifiableSimpleType();
    // set the file details invisible
    wdContext.currentContextElement().setDetailsVisibility(
    WDVisibility.NONE);
    //@@end
    //Another method for File upload button
    public void onActionUploadFile(
    com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent) {
    //@@begin onActionUploadFile(ServerEvent)
    // get attribute info for context attribute 'FileResource'
    IWDAttributeInfo attributeInfo =
    wdContext.getNodeInfo().getAttribute(
    IPrivateFileUploadView.IContextElement.FILE_RESOURCE);
    // get modifiable binary type from the attribute info,
    // requires type cast.
    IWDModifiableBinaryType binaryType =
    (IWDModifiableBinaryType) attributeInfo.getModifiableSimpleType();
    IPrivateFileUploadView.IContextElement element =
    wdContext.currentContextElement();
    // if a file in the 'FileResource' attribute exists
    if (element.getFileResource() != null) {
    try {
    String mimeType = binaryType.getMimeType().toString();
    byte[] file = element.getFileResource();
    // get the size of the uploaded file
    element.setFileSize(this.getFileSize(file));
    // get the extension of the uploaded file
    element.setFileExtension(
    binaryType.getMimeType().getFileExtension());
    // NOTE: context attribute 'FileName' must not be set
    // because the FileUpload-UI-element property 'fileName'
    // is bound to it. Consequently the fileName is automatically
    // written to the context after file upload.
    // set the details visibility attribute
    element.setDetailsVisibility(WDVisibility.VISIBLE);
    // report success message
    wdComponentAPI.getMessageManager().reportMessage(
    IMessageFileUpDownloadComp.SF_UPLOAD,
    new Object[] { binaryType.getFileName()},
    false);
    } catch (Exception e) {
    throw new WDRuntimeException(e);
    // if no file in the 'FileResource' attribute exists
    else {
    // set the details visibility attribute, hide details
    element.setDetailsVisibility(WDVisibility.NONE);
    // report error message
    IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
    msgMgr.reportContextAttributeMessage(
    element,
    attributeInfo,
    IMessageFileUpDownloadComp.NO_FILE,
    new Object[] { "" },
    true);
    // clear the FileResource context value attribute
    element.setFileResource(null);
    //@@end
    Thanks
    Chandan

  • Com.crystaldecisions.sdk.exception.SDKException$ServiceNotFound: The service WebiReportEngine could not be found(Help needed )

    com.crystaldecisions.sdk.exception.SDKException$ServiceNotFound: The service WebiReportEngine could not be found
    Here is the code I have used to obtain a report engine object
    oEnterpriseSession = CrystalEnterprise.getSessionMgr().logon(username, password, cms, authType);
    reportEngine = (ReportEngine) oEnterpriseSession.getService("","WebiReportEngine");
    Exception lies in the above line .. I am not able to debug

    To get the ReportEngine object use the following code:
    // Retrieve the Report Engines
    ReportEngines boReportEngines = (ReportEngines) boEnterpriseSession.getService("ReportEngines");
    // Retrieve the Report Engine for Web Intelligence documents
    ReportEngine boReportEngine = boReportEngines.getService(ReportEngines.ReportEngineType.WI_REPORT_ENGINE);
    You may also want to look at our samples using the Report Engine SDK available here:
    http://diamond.businessobjects.com/samples/86/1199/

  • "The attempted operation failed. An object could not be found" error when double clicking on an ics file

    Operation System: Windows 8 Pro
    System Type: 64-bit Operating System
    Office: MS Office Professional Plus 2013
    I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
    that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
    1-) Open up the Control Panel and go to Mail section
    2-) Click "Show Profiles"
    3-) Click "Add" and give a name to your profile.
    4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
    5-) Finally, set that profile to be used always.
    Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
    Is this a known issue or specific to me?
    Thanks!

    yes, I have the same problem.
    The workaround of saving the ICS file and then importing it into the current calendar
    works, 
    but the ICS calendar
     displays in other section, NOT in the section of my old events.
    why  ??

  • Account 'Cost elem. for settlmt AuC to CO objects' could not be found for

    Hi All,
    I am facing one error massage at the time of CWIP Asset settled in Cost centre
    Account 'Cost elem. for settlmt AuC to CO objects' could not be found for area 01
    Message no. AU133
    Which G/L Account (cost element) we have to assing there in Account determinati A090.
    What is empact this our G/L Account.
    Please help me to resolve this issue.
    Thanks & Regards,
    juhis

    Hi AP,
    Thanks for your reply,
    We find one element there assgin but that is not a G/L account what we do we can assgin that element in the Account determination in that asset account determination OR we have to create new G/L Account.
    When we create new G/L Account in which Account head we have to create and what is impact that g/l account in our Balance sheet account.
    Please help me ot understand that Process.
    Edited by: juhis022 on Mar 2, 2012 10:15 AM

  • Account 'Cost elem. for settlmt AuC to CO objects' could not be found for a

    Hi All,
    we are facing one error massage at the time of settlment KO88.
    Account 'Cost elem. for settlmt AuC to CO objects' could not be found for area 01
    Message no. AU133
    Diagnosis
    When creating the accounting document, the system could not find account 'Cost elem. for settlmt AuC to CO objects' in depreciation area 01 for company code CSEB.
    Procedure
    Enter this account in the account determination for Asset Accounting.
    Thanks & Regards,
    juhi

    Hi Juhi...
    Please check the below procedure....
    If you are using the Internal order process, then
    KO01 - IO Creation
    ME21N - PO creation with IO as Account assignement
    MIGO
    MIRO
    1. IO to AUC Settlement
    Define the Settlement Rule iin IO - KO02   (AUC Asset)
    KO88
    Settlement type is  "Automatic"
    For Cost analysis....you can refer to KOB1   or    KO03 -> EXtras -> Cost Analysis
    2. AUC to Fixed Asset or Cost Center
    KO02 - Settlement Rule - Cost center   or   Fixed Asset
    KO88
    "Full Settlement"
    If the process is
    AIAB and AIBU
    Refer to
    AW01N
    Hope it gives some idea
    Thanks

  • When you try to send or to receive email in Outlook 2010, you may receive one of these error messages: 0x8004010F: Outlook data file cannot be accessed. or 0x8004010F: The operation failed. An object could not be found.

    0x8004010F: The operation failed. An object could not be found.
    1. reviewed Profile instructions
    2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst 
    3. Back to Profile Instructions.
    4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
    and  gmail address PST.  Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
    5. Set up another new profile with my email address and a named pst.  Run Outlook under that Profile -
    comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile.  Tried different approaches and still ended up always with the gmail address pst.  Deleted
    all profiles but email address and comes   up.
    6. Should I just go ahead and use the gmail address pst  I need to import data or download data from gmail
    to get last years correspondence.e
    7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
    Help?
    8. One option is to merge psts but might make worse mess.
    Thanks.  Beautiful Beach weather here!

    To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
    Step 1- Locate the default Outlook data file
    Click Start, and then click Control Panel.
    In Control Panel, click Mail.
    In the Mail Setup - Outlook dialog box, click Show Profiles.
    Select your current Outlook profile, and then click Properties.
    In the Mail Setup - Outlook dialog box, click Data Files.
    Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
    Click Close.
    Step 2 - Create a new Outlook profile
    Step 3 - Configure your new Outlook profile as the default profile
    More detailed steps you can refer to this KB article:
    http://support.microsoft.com/kb/2659085

  • Have several ringtones in my itune. while synchronising 2 errors appear.1. several objects could not be found,2. an iphone was found but could not be indentified. iph.4s was new reset, ios 6

    have several ringtones in my itune. while synchronising 2 errors appear.1. several objects could not be found,2. an iphone was found but could not be indentified. iph.4s was new reset, ios 6

    Hi Grant,
    Here is what I did and so far seems it is wworking.
    1. I deleted oDesk and ShareFile. I removed them using MacKeeper (I found this application very usefull for uninstalling applications as MacKeeper looks for them all over the computer: cache, preferences, application support etc.) While for oDesk is simple as I can look myself for oDesk in any file names, whith ShareFile was a little tricky to amke it amnually as MacKeeper find files that contain Citrix name then ShareFile. I will not guess unless I would search the internet on how to manually remove sharefile from my system.
    2. I manually delete all cahe files and folders from ~Library and ~User/Library.
    3. After reboot I installed Onyx and order maintanance where I checked all its options, including but not limited to DNS caches, fonts caches, everything.
    4. After I reboot computer, I went in Disk Utility and Repaired permissions.
    Reboot again. Now seems to work fine. At least odesk Team is working properly. I will have a second thought for installing ShareFile.
    Some romanian mac users suggested to check my router connectivity and change some DNS in it. Looks like that was also a problem on some MACs. I recall the few weeks ago I had an issue with TP Link router. My computer wasn't connected to internet, though router showed that there is internet connection. I ping router from my computer and I received answer from ping. I ping google from computer, nothing. I ping google from router, was wroking. I connected the computer directly to internet without router, was wroking. When connected back through router, nothing. I contacted the guys from TP Link and they suggested to use google DNS instead of those my ISP provided. But since then I had not experienced any issue with router and internet, until now. The DNS are still those from google.
    I will keep you updated if any issues are appear again. So far, it is working perfectly as it supposed to work.
    Warm regards,
    Sebastian

  • FileUplaod UI : Object could not be found in cache, key is null!

    Hi,
    I get problem using FileUpload UI Element.
    When I select a file (any file .) and push a button (uplaod bt), I get an error message below the FileUpload UI:
    ==>  Object could not be found in cache, key is null!
    There is something odd cause in the event linked to my upload button the function is completly emtpy. So it is not o Code error. And of course I've make the context attribute Modifiable :
    IWDModifiableBinaryType type = (IWDModifiableBinaryType) wdContext.getNodeInfo().getAttribute(IPrivateExternalOrderCompView.IContextElement.FILE_RESOURCE).getModifiableSimpleType();
    Any Idear ?
    Regards,

    Hi,
    Ok guys thanks for your answers, I fixed my problem.
    The thing was I missused simple modify type.
    So here is what I'm doing :
    In my context View :
    file type : Binary
    wdInit of the View :
    IWDAttributeInfo attInfo = wdContext.getNodeInfo().getAttribute(IPrivateExternalOrderCompView.IContextElement.FILE);
              ISimpleTypeModifiable type = attInfo.getModifiableSimpleType();
              IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType) type;
    That's it !
    Everything goes good.
    Thanks
    Regards,

  • Remove-DfsnRootTarget - The requested object could not be found

    Hi,
    I just discovered that both target paths in a DFS root target is referenced by NetBIOS name, not FQDN (the names is generalized):
    Get-DfsnRootTarget -Path \\Contoso.local\AccountingSoftware| Format-List
    Path                  :
    \\Contoso.local\AccountingSoftware
    TargetPath            :
    \\Contoso-FS1\AccountingSoftware
    State                 : Online
    ReferralPriorityClass : sitecost-normal
    ReferralPriorityRank  : 0
    Path                  :
    \\Contoso.local\AccountingSoftware
    TargetPath            :
    \\Contoso-FS2\AccountingSoftware
    State                 : Online
    ReferralPriorityClass : sitecost-normal
    ReferralPriorityRank  : 0
    The goal is to remove and re-add the target paths one by one in order to use FQDN.
    When trying to remove one of the targets, I receive the following error:
    Remove-DfsnRootTarget -TargetPath "\\Contoso-FS2\AccountingSoftware" -Path "\\Contoso.local\AccountingSoftware"
    Remove-DfsnRootTarget : The requested object could not be found.
    What could be the reason for this? I get a similar error message both when using the DFS MMC tool and dfsutil.

    Hi,
    Based on your description, we can follow the article below to configure DFS to use fully qualified domain names in referrals.
    How to configure DFS to use fully qualified domain names in referrals
    http://support.microsoft.com/kb/244380/en-us
    Best regards,
    Frank Shen

  • The attempted operation failed. An object could not be found. Outlook 2010 error

    I am unable to search other mailbox in Outlook 2010, getting the following error: The attempted operation failed. An object could not be found. I removed both instances of
    KB2956128
    installed
    on 2/11/2015. It worked for a while and issue returned againa. Any suggestions?

    Hi,
    Thank you for your reporting. We have noticed this, and would like to collect more information for further investigation.
    Can you guys share your detailed system info? Also, if you have any log files about the issue, kindly share with us by sending them to this email account:
    [email protected] (please use the link of this thread as the subject).
    We appreciate your assistance with this.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Com.crystaldecisions.sdk.exception.SDKException$ServiceNotFound: The service ReportEngine could not be found

    I am attempting to automate the "Save As" or export funtion of a webi doc but the documentation that states:
    ReportEngine repEngine = (ReportEngine)EnterpriseSession.getService("ReportEngine");
    Fails with:
    com.crystaldecisions.sdk.exception.SDKException$ServiceNotFound: The service ReportEngine could not be found
    When I run:
    enterpriseSession.getServiceNames("CMSName", 0);
    There is now "ReportEngine" listed.
    Can anyone help????? This is not JSP but a command line app that simple need to open a doc, then to getView() to get the binary version of the Webi doc in PDF and simply save to disk via some java method.
    I can get the doc, query reports, schedule reports, etc.. Just not export the report to disk.
    Can anyone help???

    These are the only things that show up when I call:
    EnterpriseSession().getServiceNames("sales-demo", 0);
    Batch
    Diagnostics
    InfoStore
    Logon
    NameService
    OCAAdministrator
    Pinger
    PluginDistribution
    Session
    APSAdmin
    AuditAdmin
    ISGeneralAdmin
    SSOAdmin
    This is the whole error:
    Exception in thread "main" java.lang.NoClassDefFoundError: com/businessobjects/wp/dbg/DBGTraceable
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$100(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at com.businessobjects.rebean.wi.occa.WebiReportEngine.<init>(WebiReportEngine.java:66)
         at com.businessobjects.rebean.wi.occa.WebiReportEngineFactory.makeOCCA(WebiReportEngineFactory.java:64)
         at com.crystaldecisions.sdk.framework.internal.a.getService(Unknown Source)
         at com.crystaldecisions.sdk.framework.internal.a.getService(Unknown Source)
         at com.tidalsoft.adaptors.buisnessobjects.EnterpriseSession.getReportEngine(EnterpriseSession.java:72)
         at com.tidalsoft.adaptors.buisnessobjects.BO.main(BO.java:28)

  • Outlook 2010 / Exchange 2013: The operation failed. An object could not be found.

    Both KB2956128 and KB2956203 causing issue. Removing the patch fixes the issue. I need to know what the best way to remove the patch remotely is. Maybe a SCCM job with this:
    msiexec /I {90140000-0012-0000-0000-0000000FF1CE}MSIPATCHREMOVE={DEFF916D-4268-49CF-8FF3-E26253582E13}
    msiexec /i {90140000-001A-0409-0000-0000000FF1CE}MSIPATCHREMOVE={DEFF916D-4268-49CF-8FF3-E26253582E13}
    Please advise. Also looking for time frame for a fix to be published or these updates are rolled back/pulled by Microsoft. Thank you.
    Also this is being reported by multiple people with no resolution. Example:
    http://community.spiceworks.com/topic/790986-outlook-2010-bug-the-attempted-operation-failed-an-object-could-not?page=1

    Hi,
    Thank you for your feedback and apologize for the inconvenience caused.
    We have heard several reports regarding issues caused by KB2956128. We've escalated this issue, but we're not sure whether and when there will be an hotfix for this issue. Please look out for our official blog articles and install
    all available updates released.
    Thanks for your understanding and support.
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • WSDL exception faultcode=other_error the wrapper procedure can not be found

    HI',
    I am invoking a stored procedure from Oracle SOA 11G using DB adapter.
    in the final screen I get error:
    "Error while writing WSDL file xxxx.wsdl. Exception: WSDLException: faultCode=OTHER_ERROR:
    The wrapper procedure, ICC_TEST$PROCEDURE_RECORD_SET, could not be found in the package xxx, for the schema xxxx2
    Has anyone got this error before.
    Please advice.
    Thanks
    Yatan

    Okay, here is your dilemma.
    You cannot login to your only account and the local administrator account is in its default disabled mode.
    There is a solution, albeit totally unsupported.  Go to http://www.sysresccd.org/Main_Page and download the latest SystemRescueCd.  Burn a CD from the ISO.  When you boot with the SystemRescue CD, you will type ntpass and hit <enter>.  From there, make sure you read the screens.  You will have make selections depending on how you loaded Windows 7 (clean vs. upgrade vs. dual boot, etc).  Using this disk, you CAN enable the local administrator’s account and login in.
    I just did the procedure using Windows 7, build 7000 with SystemRescueCd 1.1.6.
    Good luck.

Maybe you are looking for