Exception CX_RS_ERROR while activating transformation

Hi,
I am trying to create a transformation from a Flat file Data source to a Cube. After mapping all the fields and clicking on the "check" button, it says that the mapping is correct.
But when I try to activate the transformation, it throws an exception, with the text:
@5C@ Exception CX_RS_ERROR occurred
(program: CL_RSTRAN_TRFN================CP,
include: CL_RSTRAN_TRFN================CM024, line: 9 @35@
Any pointers on what may be the mistake here?
Edited by: Suhas Karnik on Jun 16, 2008 3:56 PM

Hi
Go to Transaction code SM12 and click on the list and delete all locks.
come back to the same transformation and reactivate it.
it will activate correctly.
assigne points if it helps you
Archana

Similar Messages

Error while activating transformation ---- Message no. RSTRAN510

Hi,
while I am Extrating Data From Flat File I encountered this Error.
I am working on ECC 6.0 , BI 7.0.
I am trying this one in IDES, it is newly installed server.
For Flat File Extraction I follwed the Steps
1) I created Data source -
let us assume I have created a Flat File with 3 fields
SNO SNAME MARKS
File is located in workstation
Data source created successfull , I have checked in preview.
2) I have created 2 key Figures, 1 characteristic
3) I have created Infocube
here I have some doubt
while I am creating Infocube, the look and Feel is very different to 3.XX
when i try to create in 3.XX , we can see the Tabs for Kef figs,chars,Time chars and we assign chars to Dimenstions.
when i am creating Infocube in BI 7.0 , I don't Find such a Tabs and how I am assign the chars to Dimension
I created Like this
select
Info Area -
> create Info cube -
given name of the cube and create (F5).
the Info cube window displayed on the Right side
Then I did like this
select
key Figures -
> Info object Direct Input
Then I inserted my two key figures SNO,MARKS
--- continue (F5)
Dimension 1 -
> Info object Direct Input
I inserted the 1 char SNAME
--- continue (F5)
Then I saved the Info cube
Info cube saved successfull and activated successfull
Is it Right way For create InfoCube ?
4) I created Transfomation for the Data source
Data source -
> create Transfomation
I have given
Object Type : InfoCube
Name :YSTU - i selected which I already created.
It automaticall taken these parameters
Obejct Type : DataSource
Data source : YSTU
source system :PC_FILE
create Transformation (Enter)
I got the Error
Cannot generate proposal
Message no. RSTRAN017
Then I try to activate, I got the Error.
Error while activating transformation
Message no. RSTRAN510
Before I post this , I had searched in Previous SDN post for this Error , But I can't understand the solution.
I have lot of doubts like Basis Guy need to install any Patch or
I did mistake any where.
Help me to Find the solution...
sure you can get the points
Thanks
prasanna

Thank You so much Voodi, yes you are Right , I am not concentrated on Mapping, Now Transformation is activated.
and i created Info Package too for the Data source , created successfully.
I am struck on Final step creating DTP
when I am creating DTP
Data Transfer Proc : here I need to give the Dtp name ex: YDTP
DTP Type : Standard (Can be sheduled)
Target of DTP
Object Type : Info cube
Name : YSTU (This is my Cube Name)
Source of DTP
Object Type : Data source (It automatically Taken)
Data source : This is Disabled
Source system: This is Disabled
continue (Enter)
I got the message ?
Specify Name of source
and courser is in Data Transfer Proc 
Thanks
prasanna

Error while activating Transformations

Hi gurus,
Iam facing a problem while activating Transformations.
Its a flat filre loading consisting of 4 objects , 3 are standard and one is customised key figure ZPLN_VAL Data type is Amount, currency is fixed INR.
But iam getting following errors while activating transformations.
1,RULE(target ZPLN_VAL, Group;01 standard group); Conversion type missing.
2.RULE7 (Target field:ZPLN_VAL) Field planned value must be assigned to an Infoobject.
3.RULE(TARGET FIELD ZPLN_VAL) NO SOURCE UNIT ASSIGNED.
Regards
Amar.

Hi,
Map it with required Unit filed from your Source .
Mayank

Error while activating transformation

Hi Experts,
I need to activate a transformation between a cube and DSO.
But I am getting an error message while activating the Transformation the messages are as followed.
1. Error when writing routines
   Message Number. RSAA561
2. Error while activating transformation
    Message Number. RSTRAN510
3. Error activating transformation.
   Message number. RSO404
I have checked the transformation and each field is mapped to correct field and there are no routines its just 1:1 mapping can any body tell how to check the error on basis of Message Number as there is no other information available when we are displaying the error.
Regards
Shubh Karan

Might be a problem with the time conversion routines. delete the transformationa nd try again.
Good luck,
vijay

Error while activating Transformation CO_OM_WBS_3

Hi everybody,
i get the following error message while activating the transformation for CO_OM_WBS_3 in Dev
Error while activating transformation
Message no. RSTRAN510
Error when writing routines
i checked the routine for co_om_wbs_3 the syntex was correct.
i have checked in forum am not getting clear picture please guide me and
sap component version : SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW 7010006 SAPKW70106
BI_CONT 704 0006 SAPK-70406INBICONT
Regards,
Sunder

Dear anand,
thankyou
Regards,
sunder
Edited by: sundersham on Mar 28, 2010 12:34 PM

Error while activating transformation in BI 7.0

HI,
Error: Error while activating transformation.
Does anyone know how to solve this.
Sheela

Hi,
There may be many issues like:
If you have any routines, check the syntax.
Check all the fields are mapped properly or not.
Check any currency or unit conversion in transformation.
Data type mismatch -> make sure source and target infoobject either numerical or interconvertible.
Length mismatch between source and target infoobject.
Rgs,
I.R.K

Error while activating transformations? can you please help me

Hi
I am trying to create info cube , i created info objects, info cube,datasource. when i am trying to creat transformation it is throwing and error :
Error while activating transformation
Message no. RSTRAN510
Can any one help me?
Srinath

Hi
I think you are trying to activate the transformation.
Have you tried to generate proposal?
I think you will get the following error message :
Cannot generate proposal
Message no. RSTRAN017
the system would never generate a proposal . u need to map the fields manually in the transformations... after u map it ... check the mapping and activate it ...
Due to this when you are going to activate the transformation it is throwing this error message.
If this works kindly assign me some points.
Regards,
Debjani..

While activating Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting error

Dear all
While activating the Transformation 0PS_C041 - 0CO_OM_WBS_2 am getting the following error
Error when writing routines
Message no. RSAA561
Error while activating transformation
Message no. RSTRAN510
Error when activating Transformation 0N7SM4TBBDTRG1KKDKS3QRMWAHMV490Q
Message no. RSO404
plz guide me seniors
Regards,
Sunder

Hi,
Make sure your routines are syntatically correct in the transformation before activation.
still it is giving the same error please elaborate the issue and post it over here.
Thanks
Suresh

Start routine errors while activating transformations 2LIS_13_VDITM

Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PM

Thanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
      start_routine
        IMPORTING
          request                  type rsrequest
          datapackid               type rsdatapid
        EXPORTING
          monitor                  type rstr_ty_t_monitors
        CHANGING
          SOURCE_PACKAGE              type tyt_SC_1
        RAISING
          cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
    SOURCE_PACKAGE
CHANGING
    l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek

Syntax Error in Routine while Activating Transformation

Dear All,
I am activating whole scenario for 0SD_C03. we have made transformation for 2lis_11_vaitm, during installation we get below errors:
- Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
-Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
-Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
I really appreciate your any input for this.
Thanks & Regards,
Darshan

Hi,
I hope there is inbalance in between SOURCE Datapackage and Target Datapackage. So in the start routines pls check it and it not found then add in DATA_PACKAGE...
Check with ABAPer
under ,
TYPES:
BEGIN OF tys_TG_1_full,
SUBTOT_1S TYPE /BI0/OISUBTOT_1S,
and also you can fin dsimilar kind of threads in SDN.
Re: Syntax Error in Routine while Activating Transformation
Re: Issue while creating Transformation from Update rule.
Re: 0IC_C03 activation of Transformation rule ends with ERROR
Re: Error in activation of transformation
Thanks
Reddy

Problem While Activating Transformation

Hi BW Gurus,
I am currently working on BW 7.0 on Purchasing Area, I found some problem while modifying the transformation or activating the transformation. I have mapped the data source 2LIS_02_SCL Purchasing Data (Schedule Line Level). I have written a routine for mapping rules of 0ORDER_VAL base on the source field of BWVORG, BWAPPLNM, BWEFFWR, BEDAT, WAERS, HWAER, WKURS. And it shows no error while syntax check. But while activating the Transformation it leads to dump. And after that if I try to change the routine, it leads me to the same dump.
Please advice.
For reference, find the code what I wrote in the routine below,
IF ( SOURCE_FIELDS-BWVORG = '001' or SOURCE_FIELDS-BWVORG = '011'
or SOURCE_FIELDS-BWVORG = '021' or SOURCE_FIELDS-BWVORG = '004'
or SOURCE_FIELDS-BWVORG = '014' or SOURCE_FIELDS-BWVORG = '024' )
AND SOURCE_FIELDS-BWAPPLNM EQ 'MM'
AND SOURCE_FIELDS-BWEFFWR 0.
   PERFORM LOC_CURR_CONVERT
           USING    SOURCE_FIELDS-BWEFFWR
                    SOURCE_FIELDS-BEDAT
                    SOURCE_FIELDS-WAERS
                    SOURCE_FIELDS-HWAER
                    SOURCE_FIELDS-WKURS
           CHANGING RESULT.
ENDIF.
where the LOC_CURR_CONVERT is given below
      FORM LOC_CURR_CONVERT                                         *
--> LC_DOCUMENT_VALUE                                             *
--> LC_DATE                                                       *
--> LC_DOCUMENT_CURRENCY                                          *
--> LC_LOCAL_CURRENCYY                                            *
--> LC_RATE                                                       *
   LC_LOCAL_VALUE                                                *
FORM loc_curr_convert
USING    lc_document_value
           lc_date
           lc_document_currency
           value(lc_local_currency)
           lc_rate
CHANGING lc_local_value.
conversion of lc_rate from floating-point to decimal. Necessary for *
call of CONVERT_TO_LOCAL_CURRENCY.
data lc_rate_dec type p decimals 5.
lc_rate_dec = lc_rate.
IF lc_document_currency = lc_local_currency
no conversion necessary -> Main case 1
    AND NOT ( lc_document_currency IS INITIAL
           OR lc_local_currency IS INITIAL ) .
    lc_local_value = lc_document_value.
ELSEIF NOT ( lc_document_currency IS INITIAL
OR lc_local_currency IS INITIAL OR lc_date IS INITIAL ) .
conversion necessary with lc_date -> Normally not possible
    CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
      EXPORTING
        date                 = lc_date
        foreign_amount       = lc_document_value
        foreign_currency     = lc_document_currency
        local_currency       = lc_local_currency
        rate                 = lc_rate_dec
      IMPORTING
      EXCHANGE_RATE        =
        local_amount         = lc_local_value
      EXCEPTIONS
        NO_RATE_FOUND        = 1
        OVERFLOW             = 2
        NO_FACTORS_FOUND     = 3
        NO_SPREAD_FOUND      = 4
        DERIVED_2_TIMES      = 5.
    IF sy-subrc NE 0.
message a802 with lc_date lc_document_currency lc_local_currency
                    sy-subrc.
    ENDIF.
ELSE.
if conversion not possible -> assign target values
    lc_local_value = lc_document_value.
    lc_local_currency = lc_document_currency.
ENDIF.
ENDFORM.
Thnaks
Regards,
Deep.

Hi,
Please check routine if any for 0CO_REPLINE and also expert routine.
Regards,
Rema.

Getting Error ASSERTION_FAILED while activating transformation.

Hi Experts,
I am getting an error "The ASSERT condition was violated" while activating a transformation in BI. I applied SAP NOTE 1137447 and I am still getting this error given below.
Runtime Errors         ASSERTION_FAILED
Date and Time          09.10.2009 16:53:20
Short text
     The ASSERT condition was violated.
What happened?
     In the running application program, the ASSERT statement recognized a
     situation that should not have occurred.
     The runtime error was triggered for one of these reasons:
     - For the checkpoint group specified with the ASSERT statement, the
       activation mode is set to "abort".
     - Via a system variant, the activation mode is globally set to "abort"
       for checkpoint groups in this system.
     - The activation mode is set to "abort" on program level.
     - The ASSERT statement is not assigned to any checkpoint group.
Error analysis
     The following checkpoint group was used: "No checkpoint group specified"
     If in the ASSERT statement the addition FIELDS was used, you can find
     the content of the first 8 specified fields in the following overview:
     " (not used) "
     " (not used) "
     " (not used) "
     " (not used) "
     " (not used) "
     " (not used) "
     " (not used) "
     " (not used) "
Trigger Location of Runtime Error
    Program                                 CL_RSTRAN_FOBU_APPL===========CP
    Include                                 CL_RSTRAN_FOBU_APPL===========CM007
    Row                                     37
    Module type                             (METHOD)
    Module Name                             GET_CODE
Line SourceCde
    7     l_formula_id_32   TYPE sfbeid,
    8     l_s_fobu          TYPE rsfob_s_formula,
    9     l_r_formula       TYPE REF TO cl_foev_formula.
   10
   11
   12   IF p_r_formula IS BOUND AND
   13    p_mode is not initial.
   14     CALL METHOD cl_rsar_formulas=>reset_formula_foev_object
   15       EXPORTING
   16         i_formex    = p_formex
   17         i_objvers   = p_objvers
   18         i_r_formula = p_r_formula
   19       EXCEPTIONS
   20         no_entry    = 1
   21         invalid     = 2
   22         OTHERS      = 3.
   23     ASSERT sy-subrc = 0. "invalid call
   24
   25   ENDIF.
   26
   27   CALL METHOD cl_rsar_formulas=>get_formula_foev_object
   28     EXPORTING
   29       i_formex    = p_formex
   30       i_objvers   = p_objvers
   31     RECEIVING
   32       r_r_formula = l_r_formula
   33     EXCEPTIONS
   34       no_entry    = 1
   35       invalid     = 2
   36       OTHERS      = 3.
>>>>>   ASSERT sy-subrc = 0. "invalid call
   38
   39
   40   l_r_formula->compile( EXPORTING i_structure_prefix = 'SOURCE_FIELDS'
   41                         IMPORTING e_abap_formula = e_t_abap_source ).
   42
   43 ENDMETHOD.
Kindly help me.
Thanks in advance,
With Kind Regards,
Kannan Jagadeesan

Try applying the following OSS Notes:
[OSS Note 1050275 - ASSERTION_FAILED in CL_RSTRAN_FOBU_APPL->GET_CODE|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1050275] (relevant to prior to BI 7 SP14)
[OSS Note 1115923 - Check or transfer of empty formulas causes runtime error|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1115923] (relevant to prior to BI 7 SP17).

Error in routine while activating transformation

Dear all,
While activating 2LIS_04_P_ARBPL Transformation activation , I am facing following error while checking in Routine
E:Field "COMM_STRUCTURE-TGTPROCCAP" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"
statement.
I replaced COMM_STRUCTURE with SOURCE_FIELDS as suggested in on eof the forum as its field level routine.
Then I got the error as :
*E:Field "SOURCE_FIELDS" is unknown. It is neither in one of the
tables nor defined by a "DATA" statement. "DATA" statement.*
please help me out for this

Where are you writing this Routine?
Start Routine or Field Routine?
Start Routine:
You cannot use SOURCE_FIELDS. You will have to use SOURCE_PACKAGE.
SOURCE_PACKAGE does not have a header line, so you cannot use it directly.
You can just use commands like Sort SOURCE_PACKAGE or Delete SOURCE_PACKAGE.
Field Routine:
You can use SOURCE_FIELDS.
Check if you have selected the field as your source field while writing the field routine.
Please let us know where you are facing the error.
Edited by: Vishal Sanghvi on Jun 2, 2011 2:04 PM

Short Dump while activating Transformation through Program

HI All,
I am getting short dump while activating - Inactive Transformation through Program RSDG_TRFN_ACTIVATE.
However while i can activate single Transformation but if run without selection, I am getting this dump.
Short Description of Dump -
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_RSAR_FORMULAS==============CP
Application Component BW-WHM-DST
Date and Time
Please Guide.
Prasad

Hi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin

Error RSTRAN525 while activating transformation

Hi,
In my transformation one date field get updated using three source field (date, GR Process time, Plant) and logic written in routine is Result = date + GR Process time.
GR Process time (source field WEBAZ) mapped with info object 0GR_PR_TIME.
While check/activation of transformation following error comes.
"Rule 17 (target field: ZCALFDAT, group: 02 Standard Group): InfoObject properties 0GR_PR_TIME
Message no. RSTRAN525
Diagnosis
The properties of the InfoObject selected, 0GR_PR_TIME, do not match the properties of the available source field.
System Response
Check that you have chosen the correct InfoObject.
Procedure
If necessary, choose a different InfoObject."
Kindly help.
Regards,
Manish

Source field WEBAZ - Goods receipt processing time in days
Data Type DEC        Counter or amount field with comma and sign
Length     3          Decimal Places   0
Target Infoobject (Key figure) : 0GR_PR_TIME - Goods receipt processing time in days
Number, DEC        Counter or amount field with comma and sign

Exception CX_RS_ERROR while activating transformation

Similar Messages

Maybe you are looking for