Exception  CX_SHM_OUT_OF_MEMORY

Dear all,
we are having issues with an application that is currently being executed in our ECC 6.0 system on AIX Oracle 10g platform. The application takes online entered data and writes it to SAP. The application is running into memory shortages in the u201CSAP Shared Memoryu201D area which it uses. When the memory is exhausted, the application fails with dump
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_SHM_OUT_OF_MEMORY
Date and Time          12.03.2009 13:08:33
Short text
An exception occurred that was not caught.
Phisical memory available in server is 20GB
and below are few parameters for your analysis.There are many Swaps observed under memmory areas like Nametab (NTAB)   Table definition  ,   Field definition
program CUA.
All hit ratios are > 98%
ztta/roll_area                6500000
ztta/roll_first               1
ztta/short_area               3200000
rdisp/ROLL_SHM                16384
rdisp/PG_SHM                  8192
rdisp/PG_LOCAL                150
em/initial_size_MB            4097
em/blocksize_KB               4096
em/address_space_MB           4092
ztta/roll_extension           2000000000
abap/heap_area_dia            2000000000
abap/heap_area_nondia         2000000000
abap/heap_area_total          4000000000
abap/heaplimit                40000000
abap/use_paging               0
abap/buffersize               800000
abap/pxa                      shared
rtbb/buffer_length            50000
rtbb/max_tables               1000
Please suggess if any changes to these parameters need to be done in order to overcome
this issue and Affects of doing so.
Regards,
RR
Edited by: ganesh rr on Mar 16, 2009 4:46 PM

The affected parameter is
abap/shared_objects_size_MB
To what value is it actually set?
Markus

Similar Messages

  • Runtime error: CX_SHM_OUT_OF_MEMORY

    Hello Experts,
    I have opened one program in SE38 in Quality system which  contains so many routines.I need to check the source code of a routine say ZTEST.
    For that i have double clicked on the name of routine(eg. Perform ZTEST).But am getting below runtime error.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                    CX_SHM_OUT_OF_MEMORY
    This is happenning irrespective of Users and Programs.(Both Standard and Customized programs)
    But am able to view the source code of routine by double clicking on the routine name in Development system.
    I have checked the profile parameter abap/shared_objects_size_MB which is same for both Development and Preproduction system.Could you please let me know why this is happening?Do I need to restart the SAP system.
    Platform:
    SAP ECC 6.0,UNIX,ORACLE
    Thanks & Regards,
    Gopi L.

    Check
    Note 1322182 - Memory consumption of ABAP Shared Objects
    the default value is usually too low.
    Markus

  • CX_SHM_OUT_OF_MEMORY dump error in Solution Manager 7.1

    Hello all,
    We are facing an error while executing background jobs and few other operations.When i noticed in ST22, the no of dump errors are very high.
    All the dump errors are relating to SYSTEM_NO_SHM_MEMORY
    I went through SAP Note 1232973 and applied the 2nd option i.e increased the parameter "abap/shared_objects_size_MB" to 300.
    But no luck,the dump error keeps appearing.
    Also i added a profile parameter ztta/roll_first =1, then also it keep appearing.
    OS Version is AIX 5.3 64 bit
    The info from ST22 is,
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SHM_OUT_OF_MEMORY', was not
    caught and
    therefore caused a runtime error.
    The reason for the exception is:
    One of the following three possibilities has occurred:
    1. There is not enough free memory available in the shared object memory
       to store further data.
    2. The maximum size for a version of this area specified in the area
       administration will be exceeded in this version if more data is
       stored.
    3. The maximum size for all versions of all instances of this area
       specified in the area administration will be exceeded if more data
       is stored.
    The data object was to be stored in the following area instance:
    "\AREA=CL_LMDB_MODEL_SHM_AREA\INST=LDB:0000000001\CLNT=\USER=0\EMOD=256".
    Size of (to be created) Version .. 0
    Maximum Size of Version .......... "<no or unknown bound>"
    Shared Objects Memory in Total:
        Amount Used ......................... 35738256
        Amount Allocated..................... 78663680
        Free Memory ......................... 0
    The size of the Shared Objects Memory is specified by the profil
    parameter abap/shared_objects_size_MB.
    Note: Generally, termination does not take place as soon as a memory
    limit is exceeded. It happens later, at a later ABAP statement, which
    may have nothing to do with Shared Objects.
    Kindly suggest.
    Thank You,
    Regards,
    Hasan

    Hi,
    It looks like value of parameter abap/shared_objects_size_MB is still very less. Please increase value of this parameter to some higher value and then check.
    Thanks
    Sunny

  • If image file not exist in image path crystal report not open and give me exception error problem

    Hi guys my code below show pictures for all employees
    code is working but i have proplem
    if image not exist in path
    crystal report not open and give me exception error image file not exist in path
    although the employee no found in database but if image not exist in path when loop crystal report will not open
    how to ignore image files not exist in path and open report this is actually what i need
    my code below as following
    DataTable dt = new DataTable();
    string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
    using (SqlConnection con = new SqlConnection(connString))
    con.Open();
    SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
    cmd.CommandType = CommandType.StoredProcedure;
    SqlDataAdapter da = new SqlDataAdapter();
    da.SelectCommand = cmd;
    da.Fill(dt);
    foreach (DataRow dr in dt.Rows)
    FileStream fs = null;
    fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
    BinaryReader br = new BinaryReader(fs);
    byte[] imgbyte = new byte[fs.Length + 1];
    imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
    dr["Image"] = imgbyte;
    fs.Dispose();
    ReportDocument objRpt = new Reports.CrystalReportData2();
    objRpt.SetDataSource(dt);
    crystalReportViewer1.ReportSource = objRpt;
    crystalReportViewer1.Refresh();
    and exception error as below

    First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
    Second : Drag And drop this image Filed Where I want.
    private void LoadReport()
    frmCheckWeigher rpt = new frmCheckWeigher();
    CryRe_DailyBatch report = new CryRe_DailyBatch();
    DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
    DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
    DataTable dt = GetImageRow(table, "Footer.Jpg");
    report.SetDataSource(dt);
    crv1.ReportSource = report;
    crv1.Refresh();
    By this Function I merge My Image data into dataTable
    private DataTable GetImageRow(DataTable dt, string ImageName)
    try
    FileStream fs;
    BinaryReader br;
    if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
    fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
    else
    // if photo does not exist show the nophoto.jpg file
    fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
    // initialise the binary reader from file streamobject
    br = new BinaryReader(fs);
    // define the byte array of filelength
    byte[] imgbyte = new byte[fs.Length + 1];
    // read the bytes from the binary reader
    imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
    dt.Rows[0]["Image"] = imgbyte;
    br.Close();
    // close the binary reader
    fs.Close();
    // close the file stream
    catch (Exception ex)
    // error handling
    MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
    return dt;
    // Return Datatable After Image Row Insertion
    Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

  • SR Log Error - |  Message  : com.sap.esi.uddi.sr.api.exceptions.SRException

    Hi,
    We are getting below errors in /nwa/logs. We have our PI (7.11) and Service Registry configured on the same server. And have out CE (7.2) system connected to this service registry. Does any one has similar experience? Please let me know if you have any solution for the same.
    SR Log Error
    |  11-Nov-11  14:10:45.568
    |  Method   : getClassificationSystems()
    |  Class    : com.sap.esi.uddi.sr.api.ws.ServicesRegistrySiImplBean
    |  ThreadID : 146
    |  Message  : com.sap.esi.uddi.sr.api.exceptions.SRException: No classification system found for ID 'QName: Namespace= http://uddi.sap.com/classification; Name=  ConfigurationFlags'
    |
    |       com.sap.esi.uddi.sr.impl.common.Utility.cs2srException(Utility.java:122)
    |       com.sap.esi.uddi.sr.impl.ejb.ServicesRegistryBean.getClassificationSystems(ServicesRegistryBean.java:242)
    |       sun.reflect.GeneratedMethodAccessor1325.invoke(Unknown Source)
    |       sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    |       java.lang.reflect.Method.invoke(Method.java:585)
    |       com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    |       com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
    |       $Proxy1087.getClassificationSystems(Unknown Source)
    |       com.sap.esi.uddi.sr.api.ws.ServicesRegistrySiImplBean.getClassificationSystems(ServicesRegistrySiImplBean.java:456)
    |       sun.reflect.GeneratedMethodAccessor1324.invoke(Unknown Source)
    |       sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    |       java.lang.reflect.Method.invoke(Method.java:585)
    |       com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_WS.invoke(Interceptors_WS.java:31)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    |       com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    |       com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    |       com.sap.engine.services.ejb3.webservice.impl.DefaultImplementationContainer.invokeMethod(DefaultImplementationContainer.java:203)
    |       com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process0(RuntimeProcessingEnvironment.java:512)
    |       com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:486)
    |       com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:256)
    |       com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:176)
    |       com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWithLogging(ServletDispatcherImpl.java:112)
    |       com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:70)
    |       SoapServlet.doPost(SoapServlet.java:51)
    |       javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
    |       javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
    |       com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140)
    |       com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37)
    |       com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:486)
    |       com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298)
    |       com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396)
    |       com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385)
    |       com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:245)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78)
    |       com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
    |       com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
    |       com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
    |       com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
    |       com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428)
    |       com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247)
    |       com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45)
    |       com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
    |       com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
    |       com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
    |

    Hi,
    Refer Error:Service Registyr Configuration PI 7.11
    and http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8071b1b8-3c5c-2e10-e7af-8cadbc49d711?QuickLink=index&overridelayout=true
    Thanks,
    Chandra

  • HT1386 I have synced the items from itunes to an iphone 4 without problem, except the two albums I just purchased did not sync.  They show up on the itunes on my desktop and on my ipod, but not on the new iphone.  What do I need to do?

    I have an itunes account and an ipod, and when I purchased 2 albums on the computer they synced straight to the ipod.  I bought an iphone and used the usb cord from the computer to it to sync the itunes albums to the new phone.  Everything transfered, and those were albums I had uploaded (not purchased from the itunes store), except the two albmus I just purchased from the itunes store.  They appear on my itunes on the computer and ipod, but not on the iphone.  What did I fail to do or did I do incorrectly?

    This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

  • Get Attribute values from a page and procedure exception handling?

    Hi All,
    I have created new page with two input attributes not based on any VO. This page is created to capture two values and pass these to an AM method upon pressing OK button. The method in AM will call a procedure with two in parameter expecting the two values captured from the above said page.
    I have two questions, first one how to capture the values entered by the page in the controller class and advises me how to handle exceptions when my procedure fails.
    I can not use something like this since this page is not based on a VO
    String fromName = (String)vo.getCurrentRow().getAttribute("FromName");
    Do I have to create a dummy VO like select '' name1, '' name2 from dual?
    Thanks for the help.

    Hi,
    Actually you can capture the parameters on the page like this way
    String test = (String)pageContext.getParameter("id of the text input bean");
    Now in procedure you can take an out parameter which stores the error messages on exception
    and return that out parameter in java.
    and then you can throw exception on page using OAException class.
    Thanks
    Gaurav Sharma

  • Get the values from Exception class

    Hi all ..
    In class i have raised one exception
    when i catch this exception in my program i m able to get the
    error message but i need to get all the parameters that i pass
    when i raise the exception ...
    i have raised like this
          RAISE EXCEPTION TYPE cx_bapi_error
            EXPORTING
              textid = cx_bapi_error=>cx_bo_error
              class_name = 'ZHS_'
              log_no = wa_bapi_return-log_no
              log_msg_no = wa_bapi_return-log_msg_no
              t100_msgid = wa_bapi_return-id
              t100_msgno = wa_bapi_return-number
              t100_msgv1 = wa_bapi_return-message_v1
              t100_msgv2 = wa_bapi_return-message_v2
              t100_msgv3 = wa_bapi_return-message_v3
              t100_msgv4 = wa_bapi_return-message_v4
              STATUS = lt_status
    and caught the exception like this in my program
        CATCH cx_bapi_error INTO go_error.
          gd_text = go_error->get_text( ).
          EXIT.
      ENDTRY.
    in this i m just getting the class name which i have passed in exception
    i need all other parameters that i have passed ..
    if u have any idea pls let me know ..
    Thanks in advance ...

    Hello Jayakumar
    Usually the attributes of standard exception classes are defines as <b>public</b> and <b>read-only</b>. Thus, you should be able to use the following coding:
    DATA:
      go_error   TYPE REF TO cx_bapi_error.  " specific exception class !!!
    TRY.
    RAISE EXCEPTION TYPE cx_bapi_error
    EXPORTING
    textid = cx_bapi_error=>cx_bo_error
    class_name = 'ZHS_'
    log_no = wa_bapi_return-log_no
    log_msg_no = wa_bapi_return-log_msg_no
    t100_msgid = wa_bapi_return-id
    t100_msgno = wa_bapi_return-number
    t100_msgv1 = wa_bapi_return-message_v1
    t100_msgv2 = wa_bapi_return-message_v2
    t100_msgv3 = wa_bapi_return-message_v3
    t100_msgv4 = wa_bapi_return-message_v4
    STATUS = lt_status.
    CATCH cx_bapi_error INTO go_error.
    gd_text = go_error->get_text( ).
    WRITE: go_error->t100_msgid,  " perhaps the attributes have different name
                go_error->t100_msgno, " check attribute names in SE24
    EXIT.
    ENDTRY.
    Regards
      Uwe

  • Trying to delete file from trash but get this: The operation can't be completed because the item "File name" is in use. All other files delete except this one. Please help

    Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help

    Maybe some help here:
    http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use//

  • Hello I am experiencing some problems for my iMessage and FaceTime. I did the steps the Apple provided online and I still can't get it to work. My updates are up to date. Everything is working fine it's just that the Apple iMessage won't except anyth

    hello I'm experiencing some problems with my iMessage and face time. I did with Apple provided me online. I did the steps. Nothing will work, it keeps saying activation turn on Wi-Fi when my Wi-Fi is turned on. As soon as I got this on Christmas. iMessage and FaceTime have not been working. My Apple and ID password are correct. Everything else is working fine. My iOS updates are up to date, everything is fine except FaceTime and iMessage

    Did you try everything here?
    iOS: Troubleshooting Messages
    Using FaceTime and iMessage behind a firewall
    iOS: Troubleshooting FaceTime and iMessage activation
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    In the future saying your tried the Apple on-line articles does provide us with information as to which ones you found and tried

  • Dunning - ST22- Exception in GET_DUNNING_CUSTOMIZING FM.

    Hi Experts,
    Issue is,
    When the user ran the Dunning report on July 16th, (selection criteria is--> July 16th & From customer 1 TO customer 999999999), bcoz of some thing, at CUST_444, the Exception was raised (say, for customers CUST_111, CUST_222, CUST_333, its successful), saying that...ABAP/4 processor: RAISE_EXCEPTION and it stopped there/job cancelled!
    So, now, again when the user wants to(subsequent running of dunning report) run the report for customer 1 to 999999999, SAP is blocking CUST_111, CUST_222, CUST_333 reports and saying already printed on July 16th!
    ST22- Exception in GET_DUNNING_CUSTOMIZING FM.
    So, How to fix it? I guess, we hv to delete the July 16th history report, If so, How to delete it?
    thanq.
    Message was edited by:
            Srikhar

    Hi Sheshu,
    If u get chance, pls. culd u respond to my other thread, title is,
    <i><b>SM 30 -
    AUTHORITY-CHECK OBJECT 'XXX' ??</b></i>
    search criteria: authority-check object
    area: abap general-abap development
    time: 7 days.
    Pls. clarify my doubts, sent to Roman!
    I copied and paste the same code to my requiremetn, after declaring necessory data part, but not working!
    if u did not find the thread , pls. let me know!
    thanq.

  • Float overlow Exception!

    Hi all,
    To quote JLS in verbatim ..."Java floating-point
    operators produce no exceptions (�11). An operation
    that overflows produces a signed infinity, an
    operation that underflows produces a signed zero, and
    an operation that has no mathematically definite
    result produces NaN."
    But I am facing a problem here. The highest value
    that can be held by a Double variable is
    1.79769313486231570e+308. Any operation resulting in
    an overflow of this variable should produce 'infinity'
    accodring to the JLS but I am getting a
    "EXCEPTION_FLT_OVERFLOW". Does this have something to
    do with the OS or the processor?
    Here's a simple test program:
    public class FloatingPointInexactRulesTest {
    public static void main(String[] args) {
    // An example of overflow:
    double d = 1.79769313486231570e+308;
    System.out.print("overflow produces infinity: ");
    System.out.println(d + "*1.1==" + d*1.1);
    The program's output should have been:
    overflow produces infinity: 1.0e+308*1.1==Infinity
    but I get a EXCEPTION_FLT_OVERFLOW! Since the JVM cant
    violate the semantics of the JLS I think the problem
    lies somewhere else(either the OS or the processor). I
    am using WIndows2000 as the OS and Intel PIV as the
    processor.
    Please help me...
    --------------EXCEPTION!---------------------
    Unexpected Signal : EXCEPTION_FLT_OVERFLOW
    (0xc0000091) occurred at PC=0xEFA6C3
    Function=[Unknown.]
    Library=(N/A)
    NOTE: We are unable to locate the function name symbol
    for the error
    just occurred. Please refer to release
    documentation for possible
    reason and solutions.
    Current Java thread:
    Dynamic libraries:
    0x00400000 - 0x00407000
    C:\j2sdk1.4.2_04\bin\java.exe
    0x77F80000 - 0x77FFD000
    C:\WINNT\system32\ntdll.dll
    0x7C2D0000 - 0x7C332000
    C:\WINNT\system32\ADVAPI32.dll
    0x7C570000 - 0x7C628000
    C:\WINNT\system32\KERNEL32.DLL
    0x77D30000 - 0x77D9E000
    C:\WINNT\system32\RPCRT4.DLL
    0x78000000 - 0x78045000
    C:\WINNT\system32\MSVCRT.dll
    0x00250000 - 0x002C3000
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\uga1.tmp
    0x71710000 - 0x71794000
    C:\WINNT\system32\COMCTL32.DLL
    0x77F40000 - 0x77F7E000
    C:\WINNT\system32\GDI32.dll
    0x77E10000 - 0x77E75000
    C:\WINNT\system32\USER32.DLL
    0x76620000 - 0x76630000
    C:\WINNT\system32\MPR.DLL
    0x77A50000 - 0x77B3C000
    C:\WINNT\system32\OLE32.DLL
    0x779B0000 - 0x77A4B000
    C:\WINNT\system32\OLEAUT32.DLL
    0x75050000 - 0x75058000
    C:\WINNT\system32\WSOCK32.DLL
    0x75030000 - 0x75044000
    C:\WINNT\system32\WS2_32.DLL
    0x75020000 - 0x75028000
    C:\WINNT\system32\WS2HELP.DLL
    0x08000000 - 0x08138000
    C:\j2sdk1.4.2_04\jre\bin\client\jvm.dll
    0x77570000 - 0x775A0000
    C:\WINNT\system32\WINMM.dll
    0x10000000 - 0x10007000
    C:\j2sdk1.4.2_04\jre\bin\hpi.dll
    0x00CE0000 - 0x00CEE000
    C:\j2sdk1.4.2_04\jre\bin\verify.dll
    0x00CF0000 - 0x00D09000
    C:\j2sdk1.4.2_04\jre\bin\java.dll
    0x00D10000 - 0x00D1D000
    C:\j2sdk1.4.2_04\jre\bin\zip.dll
    0x77920000 - 0x77943000
    C:\WINNT\system32\imagehlp.dll
    0x72A00000 - 0x72A2D000
    C:\WINNT\system32\DBGHELP.dll
    0x690A0000 - 0x690AB000
    C:\WINNT\system32\PSAPI.DLL
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 197K
    [0x10010000, 0x100b0000, 0x104f0000)
    eden
    Another exception has been detected while we were
    handling last error.
    Dumping information about last error:
    ERROR REPORT FILE = (N/A)
    PC = 0x00efa6c3
    SIGNAL = -1073741679
    FUNCTION NAME = (N/A)
    OFFSET = 0xFFFFFFFF
    LIBRARY NAME = (N/A)
    Please check ERROR REPORT FILE for further
    information, if there is any.
    Good bye.
    --------------EXCEPTION!---------------------
    Thanks a lot.

    Yeah switching to Linux is a good idea. The firsttime I tried that,
    GRUB crashed and I screwed everything else tryingto copy the
    bootloader. Before this I had problems accessingthe file system on
    Windows via LAN, Samba server is not really theeasiest to use.
    Before that I had display problems with wierdmessages like sync out
    of range, Init respawning too fast so disabling.......I guess this is just
    the tip of an iceberg when it comes to problemswith Linux. It is
    sometimes really frustrating.Really? The only problems I recognise are the
    automatic chip set
    detection for the graphics card. I always let it boot
    in 'mode 3', figure
    out the exact chip set present in the computer and
    only then switch
    to 'mode 5' ...Yeah I had all these problems with RH Linux within a span of 2 months.
    I solved most of them though(Google is my best friend ;). The problem with the display was coz of horizontal and vertical sync values.
    btw, Samba has a nice webbrowser interface; I simply
    follow the docs
    step by step (I know next to nothing about Samba) and
    I'm in business
    after typing in all the required stuff ...I had problems with Samba bcoz of the firewall settings and the firewall interface was not comin on properly on the display.
    And now there are viruses for Linux too!Never do anything online when logged in as root and
    keep your FS
    permissions sensible.Yeah. I dont log in to root untill it is really really needed.
    An offtopic question (hope no one minds) Is there any book for Linux which is on the same lines of "The Design of the Unix Operating System" by Maurice.J.Bach?. If yes, then pls pls lemme know. I am a big Fan of "The Design of the Unix Operating System".
    kind regards,
    JosThanks and regards.

  • Error "A web exception has occurred during file upload" when trying to import ESXi image file into Update Manager

    I'm encountering this error and not sure how to fix, I'm quite new to vCenter so please bear with me.
    I'm trying out vCenter 5.1 with Update Manager 5.1 right now.  No license key has been entered and I still have 50 odd days to try it out.
    2 ESXi hosts are being managed by this vCenter, and they're both running ESXi 4.0
    I'm looking to use Update Manager to try to upgrade the ESXi 4.0 hosts to ESXi 5.1
    I downloaded the image file VMware-VIMSetup-all-5.1.0-799735.iso from VMWare website, and is looking to import it using the Update Manager so I can update the ESXi hosts, but I keep on getting the error:
    File name:     VMware-VIMSetup-all-5.1.0-799735.iso
    Failed to transfer data
    Error was: A web exception has occurred during file upload
    I tried importing it by using vSphere client to connect to vCenter server both remotely and locally, with firewall disabled.
    I've read http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1026602
    I've disabled firewall, and there is no anti-virus program on the server.  I've also restarted the machine several times, to no avail, I didn't reinstall update manager because the whole Windows and VCenter installations are clean from scratch.
    I logged into the vSphere Client using Active Directory credentials, and I've made all Domain Admins (which my account is a member of) part of the administrator group on the vCenter server. I can't log in using admin@System-Domain because it tells me I don't have permissions for it, I still haven't really had the chance to figure out why that is and not sure if that makes a difference.
    Also, I'm fairly certain I'm using the right image file, as I've burned some DVD's used that image file to upgrade some other ESXi hosts.  Unless there's a special image file I need to download?
    I'm at lost on what I can do to make it work.  Please advise.
    Thanks.

    The ISO file you mentioned is the one for vCenter Server. What you need is the "VMware-VMvisor-Installer-5.1.0-799733.x86_64.iso" (or VMware-VMvisor-Installer-201210001-838463.x86_64.iso) for the ESXi host.
    André

  • Exception-Error when excecuting JSP-File in Crystal reports for Eclipse

    Hi,
    I have created a jsp-File from an rpt-File in Crystal report for Eclipse. When I start the jsp-File on Apache Tomact 5.5 then only errors occurs.
    Coud anyone help me?
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: Unable to compile class for JSP:
    An error occurred at line: 6 in the generated java file
    Only a type can be imported. com.crystaldecisions.report.web.viewer.CrystalReportViewer resolves to a package
    An error occurred at line: 7 in the generated java file
    Only a type can be imported. com.crystaldecisions.reports.sdk.ReportClientDocument resolves to a package
    An error occurred at line: 8 in the generated java file
    Only a type can be imported. com.crystaldecisions.sdk.occa.report.application.OpenReportOptions resolves to a package
    An error occurred at line: 9 in the generated java file
    Only a type can be imported. com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase resolves to a package
    An error occurred at line: 10 in the generated java file
    Only a type can be imported. com.crystaldecisions.sdk.occa.report.reportsource.IReportSource resolves to a package
    An error occurred at line: 13 in the jsp file: /Bericht1-viewer.jsp
    ReportClientDocument cannot be resolved to a type
    10:      try catch (ReportSDKExceptionBase e)
    60:      
    An error occurred at line: 58 in the jsp file: /Bericht1-viewer.jsp
    e cannot be resolved
    55:
    56:
    57:      } catch (ReportSDKExceptionBase e)
    60:      
    61: %>
    Stacktrace:
         org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:93)
         org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
         org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.26 logs.
    Apache Tomcat/5.5.26
    Bericht1.jsp:
    <%@page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer,
    com.crystaldecisions.reports.sdk.ReportClientDocument,
    com.crystaldecisions.sdk.occa.report.application.OpenReportOptions,
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
    com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%><%
         // This sample code calls methods from the JRCHelperSample class, which
         // contains examples of how to use the BusinessObjects APIs. You are free to
         // modify and distribute the source code contained in the JRCHelperSample class.
         try {
              String reportName = "Bericht1.rpt";
              ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
              if (clientDoc == null) {
                   // Report can be opened from the relative location specified in the CRConfig.xml, or the report location
                   // tag can be removed to open the reports as Java resources or using an absolute path
                   // (absolute path not recommended for Web applications).
                   clientDoc = new ReportClientDocument();
                   // Open report
                   clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
                   // Store the report document in session
                   session.setAttribute(reportName, clientDoc);
                   // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET **************** 
                        // Create the CrystalReportViewer object
                        CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
                        //     set the reportsource property of the viewer
                        IReportSource reportSource = clientDoc.getReportSource();                    
                        crystalReportPageViewer.setReportSource(reportSource);
                        // set viewer attributes
                        crystalReportPageViewer.setOwnPage(true);
                        crystalReportPageViewer.setOwnForm(true);
                        // Apply the viewer preference attributes
                        // Process the report
                        crystalReportPageViewer.processHttpRequest(request, response, application, null);
                   // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************          
         } catch (ReportSDKExceptionBase e) {
             out.println(e);
    %>
    Thanks
    Arnold

    According to the release notes, for the JRCHelperSample to compile, you must set the target runtime for the project.
    To do this, either create a project from scratch that uses the Tomcat 5.5 target runtime, or go to the properties menu and ensure that the target runtime is set to the application server you will be using.

  • Function module JOB_CLOSE throwing exception

    Hello,
    We have a batch job which has 2 steps:
    1) Step 1 uses job_open, job_submit and job_close and immediately schedules batch job A/P_ACCOUNTS which in turn creates batch input sessions A/P_ACCOUNTS.
    2) Step 2 Processes A/P_ACCOUNTS sessions created yesterday or today.
    In few cases, job_close is throwing exception job_close_failed. I believe that error is coming due to non availability of work processes. Job A/P_Accounts is defined as a class C batch job. There is a check in the FM job_close which does the following check:
    - if the class of a batch job is B or C, it calculates the number of free work processes. If there are no work processes available then JOB_CLOSE throws JOB_CLOSE_FAILED exception. 
    - If the class is u2018Au2019, it skips this check.
    We have an option of changing the class of batch job to A but there are some system critical jobs that are running as class A.
    My question is:
    In the code, JOB_CLOSE has been called for scheduling the job A/P_ACCOUNTS with parameter start immediately. Can anyone please let me know what will happen if function JOB_CLOSE is not called with start immediately option? Will the batch job A/P_ACCOUNTS wait till the time work processes are available?
    Or, can anything else be done to solve the issue?
    Regards,
    Siddharth

    HI,
    This is my experience with job_close..
    when i was working in zprograms then i was able to scedule it any time i wanted..
    but in my standard program when i tried it didn't worked....
    so i have to use that option of starting it immediately..
    and then it is working fine..
    now if i schedule 5 jobs... one after another..
    its get queued up...and once the processor is free...its working..
    my code of job close
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount             = job_count
          jobname              = job_name
          strtimmed            = yes " yes = 'X'
        IMPORTING
          job_was_released     = job_released
        EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          invalid_target       = 8
          OTHERS               = 9.
    regards,
    Yadesh

Maybe you are looking for

  • .ite files no longer bundled with movie

    I transferred my library to a macmini server that we installed in the house. All of the iTunes extras are now showing up in the itunes library and on our appleTV as seperate files. Each .ite file is being recognized as seperate movie. This is not the

  • Total storage in User file greater than size of all folders

    I am trying to clear space of Startup drive.  When i "Get info" on User it shows 91 GB, but total of all files under User is less than 45 GB.  Where are the other files?

  • SMB dropout for XP users

    We have a G5 Xserve with an Xserve RAID as our companies file server, using both AFP and Samba for our small group of Windows XP users. We've had a recurring problem where XP users connected to a share cannot access the mapped drive. They will be con

  • Sales tracking of sales thru CA

    Hi All, I have a scenario like below: We have 3 consignment agents in a state & they are selling material to different customers n they can even have customers in same city also, so if I want to have the debtors balance for CA wise then how we need t

  • Will apple make Siri iPhone 4 compatible?

    I find it such a pity that Siri didn't come along with the iOS 5 was really looking forward to using it on my iPhone 4. Do you guys think that it's just a matter of time or do you think that it'll never come on the iPhone ?