Exception 'CX_SY_NO_HANDLER' occured while loading data from EKKO

Hi Friends,
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_SY_NO_HANDLER', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled
locally, nor declared in a RAISING clause
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SY_OPEN_SQL_DB", which was raised in the program
"CL_RSODSO_SEMANTIC_PACKETIZER=CP",
specifically in line 79 of the (include) program
"CL_RSODSO_SEMANTIC_PACKETIZER=CM002".
The cause of the exception was:
The database returned a value containing an error
Can you please help?
Best Regards,
Deepinder

Hi Gokhan,
Really could not get that.
I got that error while I load data from PSA to the DSO.
-Deepinder

Similar Messages

  • Error Occures while loading data from Source system to Target ODS

    Hi..
    I started loading Records From source system to target ODS.while i running the job i got the following errors.
    Record 18211 :ERROR IN HOLIDAY_GET 20011114 00000000
    Record 18212 :ERROR IN HOLIDAY_GET 20011114 00000000
    sp Please help me in these following Errors..
    Thanks in advance,

    Hello
    How r u ?
    I think this problem is at the ODS level, ZCAM_O04 is ur ODS Name.
    Could u check the ODS Settings, and the Unique Data Records is Checked or Not ?
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Regarding Short Dump While loading data from DB Connect

    Dear All,
    We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
    Runtime Error          PERFORM_CONFLICT_TAB_TYPE  
    Except.                   CX_SY_DYN_CALL_ILLEGAL_TYPE
    What could be the reason for the error that I am getting

    hi,
    Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
    Summary
    Symptom
    When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
    ("X") The row types of the two tables are incompatible.
    ("X") The table keys of the two tables do not correspond.
    Other terms
    transactional InfoCube, SEM, BPS, BPS0, APO
    Reason and Prerequisites
    The error is caused by an intensified type check in the ABAP runtime environment.
    Solution
    Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
    Apply the attached correction instructions.
    BW 3.0B
    Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
    BW 3.10 Content
    Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
    BW3.50
    Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
    The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
    Header Data
    Release Status: Released for Customer
    Released on: 18.02.2004 08:11:39
    Priority: Correction with medium priority
    Category: Program error
    Primary Component: BW-BEX-OT-DBIF Interface to Database
    Secondary Components: FIN-SEM-BPS Business Planning and Simulation
    Releases
    Software
    Component Release From
    Release To
    Release And
    subsequent
    SAP_BW 30 30B 30B
    SAP_BW 310 310 310
    SAP_BW 35 350 350
    Support Packages
    Support
    Packages Release Package
    Name
    SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
    Related Notes
    693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
    647752 - SAPBWNews BW 3.0B Support Package 20
    601051 - SAPBWNews BW 3.1 Content Support Package 14
    Corrections Instructions
    Correction
    Instruction Valid
    from Valid
    to Software
    Component Ref.
    Correction Last
    Modifcation
    301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
    Attributes
    Attribute Value
    weitere Komponenten 0000031199
    Thanks
    (Activate ODS/Cube and Transfer rules again..)

  • Error while loading data from R/3 into DSO

    Hi,
    While loading data from 2lis_02_s012 into a DSO the following error occured:
    =============================================
    Diagnosis
        Updating for the information structure is still activated in client 150
        (and possibly also in other clients).
    System Response
        o   It is not possible to upload data in the initial mode.
        o   Generation of the delta update was terminated.
    Procedure
        1.  Switch off updating in all system clients.
        2.  Repeat the relevant activity.
    =============================================
    Anyone plz help me in solving the issue.
    Thanks & Regards,
    VN.

    Hi VN,
    1. Incase you do full update , system will allow you to load without any error.
    2. In case you want to do init then
          Lock users
          Stop the update in the system .
          Load init Package
          Start the update
          Unlock users.
          Load delta package.
    Hope it helps.
    Regards
    Mr Kapadia

  • Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    Need solution for the following sync error: "iTunes could not sync calendars to the iPad "iPad name" because an error occurred while sending data from the iPad"

    I want to add that I deleted all the old back-ups and created a new back-up without any issues except sync problem.

  • Error While loading data from 8 DSOname to Cube.

    Hi All,
    while loading data from 8<DSONAME> to CUBE , the data is Sucessfully loaded data into Cube, but the Request Status is shown in Yellow,why it is showing, please tell me how to make it Sucessfull.
    Thanks and Regards,
    santosh.

    HI All,
    In ST22 i'm getting Short Dump, the Error massage is
    MESSAGE_TYPE_X
    WHAT HAPPEN
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
    Error Analyis is:
    Short text of error message:
    Generic process chain
    Long text of error message:
    Technical information about the message:
    Message class....... "RSMPC"
    Number.............. 000
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
    "MESSAGE_TYPE_X" " "
    "CL_RSSM_LOADING===============CP" or "CL_RSSM_LOADING===============CM005"
    "IF_RSPC_EXECUTE~EXECUTE"
    there is any Patch Problem...
    Please let me Know how to resolve this issue.
    thanks and regards,
    santosh.

  • Error message while loading data from data mart

    Please can some one help on this.
    While loading data from one cube to another (I am actually creating a backup of original cube) for 1 record I am getting the error message " internal error occured with time split" The long text of error message says Message no. RSAU101

    Take a look at this thread:
    Internal error occured with time split
    Hope it helps,
    Gilad

  • Data load failed while loading data from one DSO to another DSO..

    Hi,
    On SID generation data load failed while loading data  from Source DSO to Target DSO.
    Following are the error which is occuuring--
    Value "External Ref # 2421-0625511EXP  " (HEX 450078007400650072006E0061006C0020005200650066
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
    So, i'm  not getting  WHY in one DSO i.e Source  it got successful but in another DSO i.e. Target its got failed??
    While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
    Please explain..
    Thanks,
    Sneha

    Hi,
    I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO.  By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.  
    Please analyze the following
    Have you loaded masterdata before transaction data ... if no please do it first
    go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
    Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
    this may be the reason.
    Also check whether there is any special char involvement in your transaction data (even lower case letter)
    Regards
    BVR

  • Error while loading data from application server

    Hi all,
    Am facing a problem while loading data from application server.
    The error i get is ....
    *" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
    'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
    when i copy these values into a CSV onto a desktop and load,load is successful.
    Please let me know your views.
    Thanks&Regards,
    Praveen

    It looks like the system is trying to convert Rental/Lease to a number format.   Is the info object type CHAR or NUMC or ???  I would look there.
    Also, make  sure / is in RSKC.
    Brian

  • Error while loading data from R/3 to PSA

    Hi,
    While loading data from R/3 to PSA i am getting error 'the argument 0.6 j cannot be interpreted as a number when assing application structure.Actually in R/3 0.6 and JPY are 2 different columns.So when loading  J is getting concatenated with 0.6,so i think i am getting this error.
    Hope i am clear.
    please help me to resolve this issue.
    Thanks in Advance,
    Girish

    Hi,
    U have to go thru the note and chk/compare the settings with ur system...i.e packages, levels...
    If not take the assistance from BASIS...
    Note; And also all the notes may not be the exact note tht matches ur issue always...its jst a comparision within our system...If it doesn't solve our issue we have to search for another alternative...
    rgds,

  • Error while loading data from ECC to BI

    Hi BW Experts,
    while loading data from ECC 6.0 to BI  i got error in details tab of the infopackage as datapackage 1  arrived in bw processing not yet finished.
    Could any one help me out?
    Thanks

    Amar,
       please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
    to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
    once this over check the TRFC or IDocs struck
    if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
    if you are finding TRFcs are in stuck just select and run manually to complete.
    M

  • Error while loading data from FDM (EPM 11.1.1.3)

    Hi,
    We are loading data into HFM from FDM. While loading data from FDM it is throwing an error which as below.
    "Load data started: 5/20/2012 9:30:45 PM
    Line 27, Error: Cell for Period Mar is not an input cell.
    Actual,2011,Mar,YTD,ENT_JJ,JPY,A23232323,ENT_J76;[None];[None];[None];ICP_Load;3463437"
    There were multiples lines which are throwing error.
    After doing some checking we found that when we unpost ICP data in HFM we were able to load data from FDM. We have not locked the ICP entities because that will restrcit to load data. But we are not able to understand just unposting the ICP values why we are able to load data from FDM. Also we have not closed the period in HFM.
    Kindly suggest, what could be the possible reason.
    Thanks
    Edited by: user12121146 on May 27, 2012 5:29 AM

    one way to figure this out, would be to open a grad at the same POV.
    It will rule out a couple things.
    If it is locked, you'll visually see that it is locked. (will be grey I believe)
    If it is an invalid intersection, you'll see that as well. (will be red)
    If you do not have access to the cell, you will see that if you look at cell status, it will say NO ACCESS.
    That should help you figure out what is happening, the quick and dirty way.

  • Get "An Error occurred while retrieving data From ProjectWebApp.." when searching content on an External Content Type

    I have set-up an ECT in SPD2013 on SP2013.  It is a SQL Data source called ProjectWebApp.   I have BCS/SSS set-up.  I can create an ECT OK in SPD.  I can add the ECT to a custom list.
    The problem is when I add a new item in the list the following error message appears in red
    An error occurred while retrieving data from ProjectWebApp. Administrators, see the server log for more information
    I cannot filter or return any results.  There is data in the DB.
    Another test I do is to try and create a new App/List using the "External List" template.  When
    I select the ECT a red message appears "External Content Types are not available".  which is odd since I can add an ECT to a list as mentioned above.
    Any ideas?
    Tx
    Andrew
    Andrew Payze

    Hi Andrew,
    Please try the option Allow unlimited length in document libraries in the column settings:
    http://littletalk.wordpress.com/2011/08/18/external-content-type-an-error-occurred-while-retrieving-data-from-a-system-administrators-see-the-server-log-for-more-information/
    If it doesn't help, please refer to the link below and raise the External content type Read List operation thresholds:
    http://lightningtools.com/bcs/business-connectivity-services-end-user-implications-part-one-threshold-limit-errors/
    Please provide error message in ULS log for further troubleshooting.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Error while loading data from a file on application server

    Hi all,
    Facing an error while loading data from a flat file.
    Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
    I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
    Can you please tell me what could be the problem?
    Thank you all,
    Praveen

    Hi all,
    As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
    10/21/2006  5:11:48 AM which i need to change to 10/21/2006
    one more note is i have some of the fields as NULL in this field
    Last Updated Date
    10/21/2006  5:11:48 AM
    10/21/2006  5:11:48 AM
    NULL
    NULL
    10/21/2006  5:11:48 AM
    NULL
    I want to display the values as 10/21/2006 and NULL as it is.
    Please let me know if we have a conversion routine in datasource which can solve my problem.
    Regards,
    Praveen

  • Error while loading data from DS into cube

    Hello All
    I am getting the below error while loading data from Data source to the cube.
    Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
    Wht am i suppose to do?
    Need ur input in this regard.
    Regards
    Rohit

    Hi
    Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
    If your business is April to March make it as  'V3'
    If your business is January to Decemeber make it as 'K4'..
    activate your update rules delete old data and upload again....
    Hope it helps
    Thanks
    Teja

Maybe you are looking for