Exception EOlesysERROR in module Skype.exe @ 00129...

Skype ran with no problems prior to the latest update. Computer is Dell Latitude laptop running Win 7 Ultimate SP 1 64-bit.
First Install
1. Logged in to local admin account.
2. Disabled malwarebytes realtime protection.
3. Got a fresh download from Skype site for Save and Run.
4. Got Exception EOlesysERROR in module Skype.exe @ 00129D71.
5. Visited Skype site and reviewed Skype Community.
6. I tried to get the 6.14.0.14.msi download per the Community, but the link had been disabled.
7. Retried install in Safe mode with No Networking . Got Exception EOlesysERROR in module Skype.exe @ 00129D69.
Second Install
1. Restarted the laptop and logged into local admin account.
2. Uninstalled Skype 6.21 and Skype Click to Call.
3. Ran TweakNow Power Pack 2011 to clean registry and tracking items.
4. Got a fresh download from Skype site for Save and Run.
5. Got Exception EOlesysERROR in module Skype.exe @ 00129D71.
6. Changed permissions on Skype icon and Skype.exe to give “everyone” full control.
7. Skype would not run.
Third Install
1. Uninstalled Skype 6.21 and Skype Click to Call.
2. Found an earlier version 6.18 of Skype in the C:\users\localadmin\downloads folder.
3. Ran SkypeSetup.msi for version6.18. After completing some of the install, got Access Denied error.
4. Uninstalled Skype 6.18.
5. Ran TweakNow Power Pack 2011 to clean registry and tracking items.
6. First Search: Deleted all Skype Folders by using the Windows Search utility while logged into local admin
account. It found about 40 items.
7. Second Search: Ran the Windows Search utility again and found 8 items.
8. Ran TweakNow Power Pack 2011 to clean registry of Skype items. Ran it again to clean tracking items for Skype.
9. Retarted the laptop.
10. Third Search: Ran the Windows Search utility again and it was clean.
11. Logged in as the standard user.
12. Fourth Search: Ran the Windows Search utility again and it found 7 Skype items.
13. Ran TweakNow Power Pack 2011 to clean registry of Skype items. It found some Skype items for the standard user.
Ran it again to clean tracking items for Skype.
14. Logged out of standard user and logged in as local admin.
15. Ran dxdiag.exe per reference in the Community. No problems were found in either in 32- and 64-bit modes.
16. Could not delete the Skype Icon in the Recycle bin as it was being held by $R03LAFF.exe.
Fourth Install
1. Logged in to local admin account.
2. Got Skype 6.21.32 from CNET’s download.com and Saved to download folder.
3. Disabled Wi Fi connection, antivirus and malwarebytes.
8. Ran Skype Setup. Got Exception EOlesysERROR in module Skype.exe @ 00129D69. Also got Access Denied when trying to
run the executable.
4. Admitted defeat to myself and to the standard user of the laptop.

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Similar Messages

''Exception EArgumentExcelption in Module Skype.ex...

Hey,
Since a couple of hours I'm unable to start Skype. I'm not able to get into the program at all because when I click on the pictogram it says: ''Exception EArgumentExcelption in Module Skype.exe at 000578A8. Invalid charachters in path''
I have been searching on this site but couldn't really find any usefull information, so I decided to open up a new topic.
Is there anyone who could help me solve this problem? I've tried installing Skype again, with deleting all the files.

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

EGDIerror in module skype.exe at 01A3FFA7

I get this when i was typing: exception EGDIerror in module skype.exe at 01A3FFA7. out of system resources. What do i do?

Please, run the DirectX diagnostics tool. Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

How to raise the exception in function module

Dear abaper's.
I am creating a Function module .In that in' EXCEPTION' Tab i am giving
3 exception .1.NO_DATA_FOUND 2.NO_PRINTER_FOUND 3.SMARTFORM_INTERFACE_NOT_FOUND.
In my coding if this condtion matches i want to raise this exception.how can i do this in my coding .can any one suggest me..
advance thanks,
Warm regards,
Veera

Hi,
if that condition is not satisfied,and u didn't handle that exception while calling function module then in the runtime error u will get the text as the description of the exception in function module definition.
rgds,
bharat.

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

Skype.exe - problem library ntdll.dll

Many times already I have re-downloaded Skype due to problems. When I switch computer on, the warning message is shown :
title: "Skype.exe - Nie znaleziono punktu wejścia"
text: "Nie znaleziono punktu wejścia procedury NtAlpcSendWaitReceivePort w bibliotece ntdll.dll"
what means: "Skype.exe - Enter point not found"
text: "Entrance point of procedure NtAlpcSendWaitReceivePort in library ntdll.dll not found"
What is it and how to solve the problem?
annamatyjasik

This is a known issue with Skype and Samsung Kies Software. You may try to update your version of Samsung Kies Software or go to system32 folder and rename the avrt.dll file to avrt_old.dll
http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=APPS_GLB&CDCttType=SW&Mo...
http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_programs/skypeexe-entry-point-no...
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Exception in Function Module

Hi,
How to use exception in Function module ?
How Can I use the exception my program while calling the Function Module ?
Can anyone explain with example ?
Thanks
NK

HI,
if something happens in ur FM and u want it to be tracked in ur calling program, then u can use exception...............
If u r having(say) 3 exceptions in ur FM....
and in ur calling program its like below.
EXCEPTIONS
exception1 = 1
exception2 = 2
exception3 = 3
then if the first exception is raised in ur FM,then sy-subrc value ll be 1( exception1 = 1 )....llly if the second exception is raised in ur FM,then sy-subrc value ll be 2( exception2 = 2 ).........
now u can use this sy-subrc values like below....
If sy-subrc = '1'.
message 'First exception is raised' type 'I'.
else.
message '2nd or 3rd exception is raised' type 'I'.
endif.
Cheers,
jose.

Exceptions in function module.... for beginner......

Dear all experts,
I am new to ABAP.
Can anybody please tell, how to use the exceptions in function module ?
and if any exception happens, then how to link some messages to that exceptions?
I will also like to know, how to create those messages ?
<b>Can anybody please illustrate with help of example, so that a beginner will be able to understand. ?</b>
<b>eg,</b> i am adding two numbers in function module, and if any one passing number is negative, then i need to raise exception with message please do not enter -ve numbers for addition.
your help will be surely, rewarded with points.
waiting for reply.
Regards & Thanks
Vinay.

hi..
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE <except>.
and
MESSAGE..... RAISING <except>.
The effect of these statements depends on whether the calling program handles the exception or not. If the name <except> of the exception or OTHERS occurs in the EXCEPTIONS addition of the CALL FUNCTION statement, the exception is handled by the calling program.
If the calling program does not handle the exception
The RAISE statement terminates the program and switches to debugging mode.
The MESSAGE ..... RAISING statement display the specified message. How the processing continues depends on the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE ..... RAISING statement does not display a message. Instead, it fills the system fields SY-MSGID, SY-MSGTY, SY-MSGNO, and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION READ_SPFLI_INTO_TABLE.
""Local interface:
*"       IMPORTING
*"             VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*"       EXPORTING
*"             VALUE(ITAB) TYPE SPFLI_TAB
*"       EXCEPTIONS
*"              NOT_FOUND
SELECT * FROM SPFLI INTO TABLE ITAB WHERE CARRID = ID.
IF SY-SUBRC NE 0.
    MESSAGE E007(AT) RAISING NOT_FOUND.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table SPFLI_TAB. If it cannot find any entries, the exception NOT_FOUND is triggered using MESSAGE...RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Also check these links
http://help.sap.com/search/highlightContent.jsp
http://help.sap.com/search/highlightContent.jsp
http://help.sap.com/search/highlightContent.jsp
regards,
veeresh

Exceptions in function module

Hi,
What are the exceptions in function module.
Thanks in advance

HI,
Exceptions are used to return the error which happens in function module to the calling program.
You can't show error messages directly from Function modules. So when there are some error occurs in function module it raises the desired exception. and this exception number is passed back to calling program. in this way calling program can trace out the error happens in function module.
REgards,

What is the Exceptions in function module

Hi,
wt is the exceptions in function module? can anyone tell me?
Thanks
swathi

Exception is the mechanism by which you can give the error messages back to the program.
Say for the REUSE_ALV_GRID_DISPLAY, we have so many exceptions. Every exception has some meaning. Say the exception PROGRAM_NOT_FOUND will be raised when you had passed wrong program name in the CALLBACK program.
PROGRAM_NOT_FOUND = 1...
If the exception was raised than this value will be set to the SY-SUBRC.
SO, by accessing SY-SUBRC, you can get to know which exception was raised.
Regards,
Naimesh Patel

Unhandled exception at 0x779a385b in Acrobat.exe: 0xC0000374: A heap has been corrupted

Hi,
In our project, we are getting all book marks from PDF file for display purpose.
We are getting “Unhandled exception at 0x779a385b in Acrobat.exe: 0xC0000374: A heap has been corrupted” exception while getting Action from particular bookmark. But this is working fine for all other bookmarks, Please find the code we used below:
CString CPGRBookMarkMC::GetBookMarkDetails(PDBookmark bmObj)
       CString csBookmarkDetails;
       //Ensure that the bookmark is valid
       char * bmName = NULL;
       ASInt32 bufSize = PDBookmarkGetTitle(bmObj, NULL, 0) + 1;
       //Allocate the size of bufSize to the character pointer
       bmName = (char*)ASmalloc((os_size_t)bufSize);
       //Populate bmBuf with the bookmark's title
       PDBookmarkGetTitle(bmObj, bmName, bufSize);
       DURING
              if (!PDBookmarkIsValid(bmObj))
                     E_RETURN(csBookmarkDetails);
       PDAction objAction = PDBookmarkGetAction(bmObj);
       if(PDActionIsValid(objAction))
              PDViewDestination objDest = PDActionGetDest(objAction);
              ASInt32 bmPageNum = 0;
              ASAtom fitType = ASAtomNull;
              ASFixedRectP destRect = NULL;
              ASFixed zoom = NULL;
              PDViewDestGetAttr (objDest, &bmPageNum, &fitType, destRect, &zoom);
              char *tempPagenum = NULL;
              tempPagenum = (char*)ASmalloc((os_size_t)bufSize);
              itoa(bmPageNum, tempPagenum, 10);
              strcat(bmName ,",");
              strcat(bmName, tempPagenum);
              csBookmarkDetails = bmName;
       HANDLER
       END_HANDLER
       return csBookmarkDetails;
This unhandled exception is not handled in DURING/HANDLER block also. Please help us to resolve the issue.

It looks like you are filling a buffer here
PDBookmarkGetTitle(bmObj, bmName, bufSize);
and overflowing that buffer here
strcat(bmName ,",");
strcat(bmName, tesmpPagenum);
If that is the case, you will have problems which could appear at anytime after code execution.
Also, in the code below, the connection between bufSize and the alphanumeric string size of bmPageNum is not obvious.
              tempPagenum = (char*)ASmalloc((os_size_t)bufSize);
              itoa(bmPageNum, tempPagenum, 10);

Skype.exe attempts to contact potentially maliciou...

I am getting frequent messages from Malwarebytes that it has "Successfully blocked access to a potentially malicious IP address 222.76.139.5 (Type: outgoing, Port: 32311, Process: skype.exe). Apparently the IP address is somewhere near Beijing and is listed with pbl.spamhaus.org. Can anyone tell me why my Skype would be trying to contact this address and how I can stop it. Thanks.
Solved!
Go to Solution.

I have read similar reports before. Please check the discussion here - http://community.skype.com/t5/Security-Privacy-Trust-and/suspicious-outgoing-IP-attempts/td-p/68170
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Access violation at address 0041B7D6 in module AcrobatPro_11_Web_WWMUI.exe Read of access 00000008

When installing Acrobat Pro, I receive these errors:
EAccess violation in module AcrobatPro_11_Web_WWMUI.exe at 0001B7D6
access violation at address 0041B7D6 in module AcrobatPro_11_Web_WWMUI.exe Read of access 00000008
The program will not run.
Help?

Sounds like you have a corrupt file and need to download again. As large as the download is, it is not surprising that an error occurs.

CS3 crashes with a message of "an unhandled win32 exception has occurred in photoshop.exe"

I have been able to use Photoshop CS3 just fine but all of sudden it'll randomly crash with a message in Microsoft's Just In Time debugger stating "An unhandled win32 exception has occurred in photoshop.exe" I have Visual Studio 2008 installed and the 3.5 framework that comes with it that's why I have the JIT debugger.
My system meets minimum requirements for Photoshop CS3, and I have used Photoshop CS3 before just fine (prior to reformatting).
Thank you for your time.

Try resetting your preferences with the ctr-alt-shift. If successful will get window outlining options.

Skype crashes. Can't end Skype.exe. Access is Deni...

Lately I've been encountering this problem where Skype crashes and does not let me end the process. I'll try to include as much detail as I can. When the crash occurs, it isn't really announced. You can verify the crash has occurred by simply trying to change your status to Online, Away, Do Not Disturb, etc. If you go to change your status and nothing happens, then I know this crash that I'm referring to has indeed happened. You can close Skype normally. It will close, however, the process Skype.exe won't remove from the RAM. I'm on Windows 8, and if you go to Details on my Task Manager, you can see the process is still active. The RAM usage is not fluxuating, it's as if it's stuck. If you try to end the process once, nothing happens. If you try to end it a second time or more, you'll receive a message that says "Skype.exe cannot be terminated. Access is Denied." I'm not the only one with this problem. I've read that others have encountered it, too.
The only way I can make it so I can use Skype again is to restart my computer because it's effectively the only way to clear my cache (that I know of). The occurring nature of this problem is sporadic. I tried to pinpoint it, but I just can't. Sometimes it happens when my Internet goes out. I reset my router, and when I reconnect, Skype becomes unresponsive. It doesn't only happen when I reconnect from an Internet disconnection. Sometimes it just happens without any change that I know of. I can go days without the problem occurring. Some days, the problem happens in periods that require me to restart multiple times to get it to work. Most people tell me to just use the Windows 8 version of Skype to avoid these issues, but Windows 8 lacks some of the ease of access that the Desktop version of Skype has that I've grown accustomed to as well as the ability to change the volume in my volume mixer. I'd have trouble with either version, honestly. Please respond when you can, any help and solutions will be much appreciated.
Also, I want to note that if I I try to end the process when this crash has not occurred, it does end successfully. This problem, for me, is exclusive to this crash.
My DxDiag: http://tny.cz/ea7c1ac9

I'm having the same problem
Since Microsoft take over skype I've never been able to run skype without problems. It seems that everytime they upgrade skype, this problem comes again.
The worse part is, skype crashes, can't kill process (even with procexp, and whatever solution you think work), can't open new skype, connection wifi becomes instable, and after a while I lose connection to internet, can't even do a clean shutdown because it hangs when closing (I guess because of this special skype process that can't be killed).
Every time I put the laptop to sleep, when I come in again, skype crashes, and the problem comes.
I've more windows shutdowns in this last month than I had during the last 2 years.
What is the solution ? Uninstall Skype and go for another chat/phone/video solution ? Can I've my credit money back ?
Please fix this problem. I'm really very anoid with this new SKYPE FEATURE
Thank you
JAV

Exception EOlesysERROR in module Skype.exe @ 00129...

Similar Messages

Maybe you are looking for