EXCEPTION FOREIGN_LOCK, nothing done!- CLEAN_REQREQ_UP job

Dear Experts
When I create a shc, the same is approved & a follow on document couldn't be created. The reason being job CLEAN_REQREQ_UP is not running correctly & upon execution gives a message 'EXCEPTION FOREIGN_LOCK, nothing done!'. Pls advise.
Ravi

Hi,
Please check any long running job in the system which is more than expected  and immediately cancel that job.
Again reschedule the job CLEAN_REQREQ_UP and check.
This issue  has been  encountered after a database refresh activity by our basis team earlier.
Regards,
Suresh

Similar Messages

  • EXCEPTION FOREIGN_LOCK, nothing done!- in CLEAN_REQREQ_UP job

    Hello Experts
    I am using SRM 4.0
    Whenever I create a SHC & the same is approved, the followon documents are not created. The reason being the CLEAN_REQREQ_UP is not running properly & upon execution gives a message 'EXCEPTION FOREIGN_LOCK, nothing done!'. What could be the reason? Pls advise.
    Ravi

    Hi,
    Please check any long running job in the system which is more than expected  and immediately cancel that job.
    Again reschedule the job CLEAN_REQREQ_UP and check.
    This issue  has been  encountered after a database refresh activity by our basis team earlier.
    Regards,
    Suresh

  • What King of exception handling is done in OA framework code?

    Hi All,
    I am not a core java person but have to do some OA framework code changes.Wanted to know what kind of exception handling is done in OAF codes?
    I was looking as the seeded oracle controllers and dont see any try catch blocks.
    can anyone guide me?

    OAF java based framework, hence exception handling is similar to how its done in core java. I would advuce to better go through exception handling concepts of core java.
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Trying to install Photoshop Elements 13 - I'm getting an "Exit:  34 code" failure.  Adobe Tech support promised 2 weeks ago to research and resolve; nothing done.

    Trying to install Photoshop Elements 13 - I'm getting an "Exit:  34 code" failure.  Adobe Tech support promised 2 weeks ago to research and resolve; nothing done.

    Jive is the forum hosting provider which Adobe uses.  If you are receiving e-mail updates about Jive then it is likely due to the forum notifications.
    Steve Miller I am so sorry I see that you updated case 186454198 on 3/20/15 but you have not received a response since then.  I have asked that a member of our support team contact you directly at the phone number we have on file.  Please feel free to update this discussion if you continue to experience difficulties.
    I would recommend reviewing the installation log files for the update you are trying to apply to determine the cause of the error.  You can find details on how to locate and interpret the installation log files at https://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.htm l.  You are welcome to update this discussion with any errors which you are able to locate.

  • How do I solve this error message Exception Details: System.Exception: Unable to ExecuteModuleActionURI : Module/Jobs/Controller/Applications/Action/Apply/JobID/915337

    Server Error in '/' Application.
    Unable to ExecuteModuleActionURI : Module/Jobs/Controller/Applications/Action/Apply/JobID/915337
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Exception: Unable to ExecuteModuleActionURI : Module/Jobs/Controller/Applications/Action/Apply/JobID/915337
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [Exception: Unable to ExecuteModuleActionURI : Module/Jobs/Controller/Applications/Action/Apply/JobID/915337]
    BiteCMF.Util.Xsl.ExtensionObjects.BiteExtensionObject.ExecuteModuleActionURI(String moduleActionURI, String location) in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\Util\XSL\ExtensionObjects\BiteExtensionObject.cs:63
    [XslTransformException: An error occurred during a call to extension function 'ExecuteModuleActionURI'. See InnerException for a complete description of the error.]
    System.Xml.Xsl.Runtime.XmlExtensionFunction.Invoke(Object extObj, Object[] args) +1292307
    System.Xml.Xsl.Runtime.XmlQueryContext.InvokeXsltLateBoundFunction(String name, String namespaceUri, IList`1[] args) +806
    <xsl:template match="Job">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current, String URL) +20724
    <xsl:template match="ViewData">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current) +152
    <xsl:apply-templates>(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator ) +806
    Root(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime) +55
    System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean closeWriter) +150
    System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results) +88
    System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, Stream results) +89
    BiteCMF.Util.Xsl.BiteXsl.Transform(XmlDocument xmlToTransform) in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\Util\XSL\BiteXSL.cs:216
    BiteCMF.Util.Xsl.BiteXsl.Transform(XmlDocument xmlToTransform, String xslUrl) in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\Util\XSL\BiteXSL.cs:182
    BiteCMF.Modules.ViewActionResult.ToString(BiteRequestBroker requestBroker) in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\Modules\ViewActionResult.cs:166
    BiteCMF.Modules.ViewActionResult.Process(BiteRequestBroker requestBroker) in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\Modules\ViewActionResult.cs:255
    BiteCMF.Modules.CMS.CMSRequestBroker.ProcessRequestAsFrontend() in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\Modules\CMS\CMSRequestBroker.cs:221
    BiteCMF.Modules.CMS.CMSRequestBroker.HandleRequest() in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\Modules\CMS\CMSRequestBroker.cs:45
    BiteCMF.CMS.BiteRequestBroker.ExecuteModuleBrokers() in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\CMS\BiteRequestBroker.cs:165
    BiteCMF.CMS.BiteRequestBroker.ProcessRequest() in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\CMS\BiteRequestBroker.cs:83
    BiteCMF.BiteHttpModule.ProcessRequest(HttpApplication app) in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\BiteHttpModule.cs:192
    BiteCMF.BiteHttpModule.Application_PostAcquireRequestState(Object source, EventArgs e) in C:\Users\mbailey.REDANT\Desktop\Projects\Changeboard\BiteCMF\BiteHttpModule.cs:164
    System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171
    Version Information: Microsoft .NET Framework Version:2.0.50727.5448; ASP.NET Version:2.0.50727.5456

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • JDI Configuration - Imports finished but nothing done

    Hello,
    I am importing the files SAP_JTECHS, SAP_BUILDT, and SAP-JEE as per track configuration steps. We are on NW04 SP15.
    I started the imports, DEV and CONS system went OK (they were running a few minutes or so) but import into the TEST system failes although it says import finished (it ran for about one second)
    I checked the Repository-import, CBS-make and SDM deploy logs.
    This is what is in the log files:
    Repository-import
    Info:Starting Step Repository-import at 2006-11-22 15:06:41.0234 +1:00
    Info:Step is not executed. Import of Archives only. Repository import not needed.
    Info:Step Repository-import ended with result 'not needed' at 2006-11-22 15:06:41.0234 +1:00
    CBS-make:
    Info:Starting Step CBS-make at 2006-11-22 15:06:41.0234 +1:00
    Info:Step is not executed. Import of Archives only. CBS build not needed.
    Info:Step CBS-make ended with result 'not needed' at 2006-11-22 15:06:41.0250 +1:00
    SDM-deploy
    Info:Starting Step SDM-deploy at 2006-11-22 15:06:41.0250 +1:00
    Info:empty list of archives for deployment: nothing done
    Info:Step SDM-deploy ended with result 'not needed' at 2006-11-22 15:06:41.0250 +1:00
    Does anyone know why we get the results 'not needed'?
    Thanks in advance.
    Kind regards,
    Dave Arends

    Hi,
    The message says Import finished because the Test stage has no corresponding workspaces in DTR and buildspaces in CBS.
    SDM deployment is not needed for these sca files for all stages.
    Hence it is a success
    Regards
    Sidharth

  • I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.

    I am trying to access an https site and am getting a "This connection is untrusted" message. I am willing to bypass, but when I click the Add Exception button and then try to click the Confirm Security Exception button, nothing happens.

    unfortunately the do_not_trust certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
    <br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
    afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
    [[Troubleshoot Firefox issues caused by malware]]

  • HT4623 Itunes is restoring the software on this Ipad. But nothing done. Always "Waiting for Ipad". On Ipad, only is there Apple logo.

    Itunes is restoring the software on this Ipad.
    But nothing done.
    Always "Waiting for Ipad".
    On my Ipad, only is there Apple logo.
    What do I do now?

    How long has it been displaying the Apple logo? Does it have a progress bar underneath?
    If you feel like it's been that way for too long, try putting the iPad in Recovery Mode:
    Leave it plugged into the computer. Hold the home and power buttons at the same time until the screen goes black and the Apple logo reappears. At that point, release the power button but continue holding the home button until iTunes on your computer says "iTunes has detected a device in Recovery Mode." Then click "Restore" in iTunes.

  • Exception ( in Reporting Agent ) background job runs indefinitely

    Hi
    I created an Exception setting under reporting agent (to send out a mail in the SAP Office inbox, on a specific exception) and assigned it under a scheduling package.
    I have assigned a proper query variant to the exception setting also.
    When I exeucte the job, it goes indefinitely.
    I highly appreciate if somebody can help what needs to be done to fix this.
    Thanks
    KC

    Hi,
    If you choose the Precalculate by User option, all the data and HTML pages for the Reporting Agent setting are precalculated for each of the selected users in a single job. This applies in both the cases: Roles or users. When you specify a role after selecting the option 'Precalculate by User', the precalculation will be done for all the users assigned to that role and not the role.
    Roles/Users is just 2 different ways of giving the user restriction. If you specify the roles, the system will precalculate for all the users assigned to the role. If you have few users for whom you want the precalculation to be done, then you can specify the user IDs. If you have many users assigned to a particular role for whom you want the precalculation to be done, then you can specify the role.
    Regards,
    Shilpa

  • JSF Exception that I don't understand

    I have a jsf fragment in a page that causes this exception:
    [#|2007-02-14T12:35:43.156+0100|SEVERE|sun-appserver-pe8.2|org.apache.pluto.portalImpl.aggregation.PortletFragment|_ThreadID=14;|Error in Portlet
    javax.portlet.PortletException: <not set> is not allowed
         at com.sun.faces.portlet.FacesPortlet.storeInitParameter(FacesPortlet.java:388)
         at com.sun.faces.portlet.FacesPortlet.render(FacesPortlet.java:311)
         at org.apache.pluto.core.PortletServlet.dispatch(PortletServlet.java:205)
         at org.apache.pluto.core.PortletServlet.doGet(PortletServlet.java:145)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at org.apache.pluto.core.PortletServlet.service(PortletServlet.java:140)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
         at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:599)
         at org.apache.catalina.core.ApplicationDispatcher.access$100(ApplicationDispatcher.java:80)
         at org.apache.catalina.core.ApplicationDispatcher$PrivilegedInclude.run(ApplicationDispatcher.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:509)
         at org.apache.pluto.invoker.impl.PortletInvokerImpl.invoke(PortletInvokerImpl.java:120)
         at org.apache.pluto.invoker.impl.PortletInvokerImpl.render(PortletInvokerImpl.java:73)
         at org.apache.pluto.PortletContainerImpl.renderPortlet(PortletContainerImpl.java:105)
         at org.apache.pluto.portalImpl.core.PortletContainerWrapperImpl.renderPortlet(PortletContainerWrapperImpl.java:70)
         at org.apache.pluto.portalImpl.aggregation.PortletFragment.service(PortletFragment.java:168)
         at org.apache.jsp.WEB_002dINF.aggregation.ColumnFragment_jsp._jspService(ColumnFragment_jsp.java:66)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at sun.reflect.GeneratedMethodAccessor988.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
         at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:599)
         at org.apache.catalina.core.ApplicationDispatcher.access$100(ApplicationDispatcher.java:80)
         at org.apache.catalina.core.ApplicationDispatcher$PrivilegedInclude.run(ApplicationDispatcher.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:509)
         at org.apache.pluto.portalImpl.aggregation.AbstractFragment.service(AbstractFragment.java:112)
         at org.apache.jsp.WEB_002dINF.aggregation.RowFragment_jsp._jspService(RowFragment_jsp.java:66)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at sun.reflect.GeneratedMethodAccessor988.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
         at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:599)
         at org.apache.catalina.core.ApplicationDispatcher.access$100(ApplicationDispatcher.java:80)
         at org.apache.catalina.core.ApplicationDispatcher$PrivilegedInclude.run(ApplicationDispatcher.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:509)
         at org.apache.pluto.portalImpl.aggregation.AbstractFragment.service(AbstractFragment.java:112)
         at org.apache.jsp.WEB_002dINF.aggregation.PageFragment_jsp._jspService(PageFragment_jsp.java:75)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at sun.reflect.GeneratedMethodAccessor988.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
         at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:599)
         at org.apache.catalina.core.ApplicationDispatcher.access$100(ApplicationDispatcher.java:80)
         at org.apache.catalina.core.ApplicationDispatcher$PrivilegedInclude.run(ApplicationDispatcher.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:509)
         at org.apache.pluto.portalImpl.aggregation.AbstractFragment.service(AbstractFragment.java:112)
         at org.apache.jsp.WEB_002dINF.aggregation.RootFragment_jsp._jspService(RootFragment_jsp.java:159)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:297)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:247)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at sun.reflect.GeneratedMethodAccessor988.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
         at org.apache.catalina.core.ApplicationDispatcher.doInclude(ApplicationDispatcher.java:599)
         at org.apache.catalina.core.ApplicationDispatcher.access$100(ApplicationDispatcher.java:80)
         at org.apache.catalina.core.ApplicationDispatcher$PrivilegedInclude.run(ApplicationDispatcher.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDispatcher.java:509)
         at org.apache.pluto.portalImpl.aggregation.AbstractFragment.service(AbstractFragment.java:112)
         at org.apache.pluto.portalImpl.Servlet.doGet(Servlet.java:281)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         at sun.reflect.GeneratedMethodAccessor988.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
         at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
         at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
         at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
         at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
         at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
         at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
    |#]But I really don't understad what can be wrong. Or how can I debug it.
    The fragment contains a lot of TextFields (read only) and static texts, everyone having their own style. There's one hidden field. Nothing more.
    The values of the texfields and the hiddenfield are set dynamically
    I guess that a property of a component is not set, or smtn like that.
    The exception happens only when I press a button which returns to the same page (no other action taken).
    I am using JSCreator 2.1 with bundled server.

    I didn't know what was "not set" and where... But as
    soon as I posted this message I realized, that "<not
    set>" is Creator's way to say that something is NOT
    SET. So I searched through the sourcecodes and found
    out, that for some reason, there is a value "<not
    set>" in the style property of one of the
    statictexts.
    background-image: url(<Not Set>);I suppose this is a bug in Creator, isn't it?Can say for sure, as I've never worked with that.. glad you find what the problem was.
    MeTitus

  • How to avoid error message re: an exception that I don't care about

    I written a script that allows a user to click on a thumbnail image and then the script will change the html in order to play a particular video. It works, except that it throws some kind of error and I don' t know what it is. Since it works, I don't care what it is, but I would like to catch it. The popup error window says "An error occurred inside a plug-in contained on this page." Any ideas on what the error might be? Below is my code.
    <script type="text/javascript">
    function PlayVideo($Thumbnail)
    // Then there is a PHP section where I look up the video file, $VideoFile, in a database with $Thumbnail as my criteria. For now, I have a file hardcoded into the param.
    var $NEWhtml; // variable to build new script to swap with
    $NEWhtml ='<object id="MP4player" classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" width="400" height="250" codebase="http://www.apple.com/qtactivex/qtplugin.cab">\n';
    $NEWhtml +='<param name="src" value="VideosApproved/Toad Singing.mp4">\n';+
    +$NEWhtml+ ='<param name="autoplay" value="true">\n';
    $NEWhtml +='<param name="loop" value="false" >\n';+
    +$NEWhtml+ ='<embed width="400" height="250" pluginspage="http://www.apple.com/quicktime/download/" type="video/quicktime" autoplay="true" controller="true"></embed>\n';
    $NEWhtml +='</object>\n';
    // REMOVE OLD ELEMENT
    var specialzone = document.getElementById('MP4section');
    var element = document.getElementById('MP4player');
    element.parentNode.removeChild(element);
    // ADD NEW ELEMENT
    var specialzone = document.getElementById('MP4section');
    var change = document.createElement('MP4player');
    change.innerHTML = $NEWhtml;
    specialzone.appendChild(change);
    return true;
    </script>

    This site supports java
    Java != javascript

  • OCA_Abuse exception 6402 while promoting the job, Bobj

    Hi Guys,
    I am facing below issue while promoting Webi reports from PRD to QA. Below is the error i am facing.
    The server supplied the following details: OCA_Abuse exception 6402 at [.\osca_fs_impl.cpp : 431]  46405 {D:\Apps\BOQ\SAP BusinessObjects Enterprise XI 4.0\FileStore\Input\a_161\241\005\389537\aa8ybd9pnerlpouln2icl2w-xguid[aac2e0k5attgo3unaikho0i]-guid[c3d34986-5e75-4de9-859f-5f7618be895f18].wid}
    I checked the path and the location. the file was missing in the location.
    But i can able to promote job from PRD to dev. Please help me.
    Regards,
    Shree

    Hi Shree
    I got the same problem in a Linux platform. The cause is the rights of the owner on dtenFrsInput/Frsoutput Fils System. When I changed the owner rights (chown -R buoser:bouser /<frs path>) with root credentials, the problem was solved.
    In your case, you use windows server, I see. I think, you can verify the rigth at this path level:
    D:\Apps\BOQ\SAP BusinessObjects Enterprise XI 4.0\FileStore  
    and children.
    Let me know!
    Vincent

  • How we can done background job in web dynpro abap

    Hi expert,
    my requriment is how i can set background job in web dynpro .
    regard's
    vikash

    The same way you do it in normal ABAP. There is nothing Web Dynpro ABAP specific about starting a background job.
    There are API Function modules that begin with the name JOB_*.  Have a look at the online help for samples:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fa/096d40543b11d1898e0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fa/096d4d543b11d1898e0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fa/096d67543b11d1898e0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fa/096d74543b11d1898e0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fa/096d8e543b11d1898e0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/fa/096ce5543b11d1898e0000e8322d00/frameset.htm

  • Multiple constraints cause exception and I don't understand why;

    Hi:
    I am using a 10.2.0.3 DB to look at some code that to the best of my knowledge works in 8i. The combination of constraints they put on the table end up preventing a user from inserting records in 10g due to a constraint violation.
    Caveats: NOT MY CODE! They are using CHAR strings for times. Yes it's scary. Yes it's a problem in its own right. NOT the problem I care about right now. I care about the bigger question of why do the two constraints that (to me) appear to be non-conflicting cause a violation.
    Here's the code to recreate the situation:
    create table timeConstraintTest
      MY_KEY         NUMBER(11)             NOT NULL,
      SOME_NBR       NUMBER(3)              NOT NULL,
      SOME_DATE      DATE                   NOT NULL,
      CHAR_TIME_IN   VARCHAR2(5 BYTE)       NOT NULL,
      CHAR_TIME_OUT  VARCHAR2(5 BYTE)       NOT NULL
    ALTER TABLE timeConstraintTest ADD (
      CONSTRAINT TCT_CPK
    PRIMARY KEY
    (MY_KEY));
    ALTER TABLE timeConstraintTest ADD (
      CONSTRAINT TIME_IN_CCK
    CHECK (LENGTH(CHAR_TIME_IN) = 4 AND
        LTRIM(char_time_in,'0123456789') IS NULL AND
        SUBSTR(char_time_in, 1, 2) BETWEEN 0 AND 24 AND
        SUBSTR(char_time_in, 3, 2) BETWEEN 0 AND 59));Now, if I try and insert a record with the following :
    insert into timeConstraintTest values(1,1,sysdate,'1234','1245');I get
    ORA-02290: check constraint (GAFF.TIME_IN_CCK) violated
    Now if I disable the NOT NULL constraint on the CHAR_TIME_IN column (yeah I should have created it explicitly and named it)
    alter table timeConstraintTest disable constraint SYS_C0056162;the insert will work.
    This may be correct, it may be a bug. I don't know. I just want to understand it. Does anyone know why this violation is being thrown?
    Thanks

    Failed in my case.
    10.2.0.3 on Solaris 64 bit.
    SQL> create table timeConstraintTest
      2  (
      3    MY_KEY         NUMBER(11)             NOT NULL,
      4    SOME_NBR       NUMBER(3)              NOT NULL,
      5    SOME_DATE      DATE                   NOT NULL,
      6    CHAR_TIME_IN   VARCHAR2(5 BYTE)       NOT NULL,
      7    CHAR_TIME_OUT  VARCHAR2(5 BYTE)       NOT NULL
      8  );
    Table created.
    SQL>
    SQL>
    SQL> ALTER TABLE timeConstraintTest ADD (
      2    CONSTRAINT TCT_CPK
      3   PRIMARY KEY
      4   (MY_KEY));
    Table altered.
    SQL>
    SQL>
    SQL> ALTER TABLE timeConstraintTest ADD (
      2    CONSTRAINT TIME_IN_CCK
      3   CHECK (LENGTH(CHAR_TIME_IN) = 4 AND
      4      LTRIM(char_time_in,'0123456789') IS NULL AND
      5      SUBSTR(char_time_in, 1, 2) BETWEEN 0 AND 24 AND
      6      SUBSTR(char_time_in, 3, 2) BETWEEN 0 AND 59));
    Table altered.
    SQL>
    SQL> insert into timeConstraintTest values(1,1,sysdate,'1234','1245');
    insert into timeConstraintTest values(1,1,sysdate,'1234','1245')
    ERROR at line 1:
    ORA-02290: check constraint (ETL_IMPORT.TIME_IN_CCK) violated
    SQL>
    SQL> select * from v$version
      2  /
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
    PL/SQL Release 10.2.0.3.0 - Production
    CORE    10.2.0.3.0      Production
    TNS for Solaris: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    SQL>Cheers
    Sarma.

  • I got thrown an exception and i don't understand it can anyone help

    this exception happend right after my constructor as it was appending things to my forms
    first time it was run after succesfull compilation
    java.lang.IllegalStateException
    java.lang.IllegalStateException
         at javax.microedition.lcdui.Form.append(+20)
         at UserDetails.startApp(+268)
         at javax.microedition.midlet.MIDletProxy.startApp(+7)
         at com.sun.midp.midlet.Scheduler.schedule(+270)
         at com.sun.midp.main.Main.runLocalClass(+28)
         at com.sun.midp.main.Main.main(+116)

    quote of the javax.microedition.lcdui.Form.append(Item) - javadoc
    "throws: IllegalStateException - if the item is already owned by a container"
    That means, that the Item you want to append is already append in another Container (or Form, generally Displayable). Is it possible, that you tried something like this?
    hth
    Kay

Maybe you are looking for

  • Importing Power Point into LCDS

    I was wondering if there is a way to import preferably a Power Point presentation or a PDF document into LCDS without hours of copy/paste. Thanks in advance for any help.

  • There is no option to update my phone to ios 7

    The option to update to ios 7 was there all day but i wasnt home so i didnt have wifi to do it. Now i have wifi and the option isnt there anymore. I even tried turning off my wifi and a view times an error came up but now its back to nothing at all.

  • Connecting to an internal HD

    I am going to replace my internal HD with a 120 GB HD. After I install it I want to transfer stuff from the old HD to the new HD. Is there any cable that will connect the old HD, (now outside the computer) to a USB or Firewire port? Mark

  • XI Installation: Dispatcher Not Running

    Hi, We're trying to install XI and have upgraded to SP16.  We then did a stopsap and tried to start the services using startsap. However, the dispatcher is not coming up.  The J2EE engine is not running and I cannot log into Visual Administrator.  He

  • Problem w/FCS3 Install DVD

    In light of recent events, I wanted to make a bootable FCS3 backup external drive for safe keeping. Problem is that my Install disk doesn't work anymore. I put it into my MacBook Pro's Superdrive and nothing happens. About 5 minutes later it shows up