Exception Handling for Multi Mapping in bpm
Hello,
does anybody know a way of catching an error occured in a multi-mapping used in an integration process.
It seems to me, that when i am using a multi-mapping in an integration process and an error occurs, the message cannot get back to the integration process. In smq2 I can see, that there is the following error:
CX_MERGE_SPLIT
Regards
Günther
The transformation-step is in an block with an exception branch and it is well configured.
When I use a 1 to 1 mapping and an error in the mapping occurs, all is correct. The integration process jumps in to the exception branch and finishes correct. But when use a multi mapping (1 to n; n to 1; n to m) and an error in the mapping occurs, then there is always an error in the bpe inbound queue.
There must be some problem with the split-and-merge program. I think that the split-and-merge program handles the merging of n messages into 1. You can see this when you test a mapping in the integration builder designer. In a multi-mapping there you can see a xml-structure that envelopes the application messages, f. ex.:
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<myMessage1>data</myMessage1>
</ns0:Message1>
<ns0:Message2>
<myMessage2>data2</myMessage2>
</ns0:Message2>
</ns0:Messages>
Similar Messages
-
Regarding Exception handling for Value mapping
Hi
We have a requirement for resending the message (using SXMB_MONI)for Value mapping and other message mapping related errors . Is there any others way we could achieve this , Any help on this is appreciated ?
Thanks in advance,
JishiHi Jishi,
I don't think that SXMB_MONI is the solution.
If you have a mapping error this can belong to two things:
a) either your mapping is wrong
b) or your message is wrong.
In case a) you have to correct your mapping
In b) The sending system must look what happend.
In my opinion in both cases (a & b) the process must be restartet from the source system. That's the way we do it.
Additionally we send a information message in the exception branch to the sending system
Regards Mario -
BPM - Exception handling in multiline mapping
Hi,
I have in a BPM a block with processing mode ParForEach containing a transformation and then a send step.
If the transformation (mapping) generates an exception for one of the lines of the multiline variable being processed, no subsequent lines are passed to the send step.
I want the process to execute the mapping for each line and then send messages corresponding to lines without error. How can I do?
Thank you
SimonaHi Simona,
I also feel that Michal had suggested the correct solution. Not sure why you are saying that the error gets propagated, if you have defined a proper Exception handling for the inner block.
But regarding your design for "ParForEach", I am not sure whether you really need to carry out a transformation step for each Block instance, in which case you can keep the transformation step before the "ParForEach" block.
Rgds
R Chandrasekhar (RC) -
Error: 1:n multi-mapping using BPM for file to file scenario
Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022 Source = SI_file_split_out
u2022 Target = SI_file_split_in
u2022 Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022 Source system to BPM using interface SI_File_Abs_source
u2022 BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022 from source system to BPM
u2022 Sender interface: SI_File_Split_Out
u2022 Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022 Commu. Component: Source System
u2022 Using interface: SI_File_Abs_source
u2022 Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022 Sender Communication Component: BPM
u2022 Receiver Communication Component: Target System
u2022 Receiver Interface: SI_File_Split_In
u2022 Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
PavinHi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
Message1
MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami. -
Exception Handling in Message Mapping and Alert
Hello,
1. Pls let me know the concept of Exception Handling and Alerts.
2. Pls provide some blogs for Exception Handling in Message Mapping.
3.What are Alerts and how it help us in XI. Pls provide some blogs for Alert
4.How are Alerts and Exception Handling can be related say for some scenario
RegardsHi,
Plz check out these blogs of Sravya on Error Handling:
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/sravya.talanki2/blog/2006/11/23/error-handling-framework-xiout-of-the-box-episode-2
Also check this SAP Presentation:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9418d690-0201-0010-85bb-e9b2c1af895b
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Error Handling :
http://help.sap.com/saphelp_nw04/helpdata/en/56/b46c3c8bb3d73ee10000000a114084/frameset.htm
Alerts:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
BPM:
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
Working with acknowledgements
regards -
Duplicate Message ID issue in case of Multi mapping (without BPM)
Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
JageshHi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen. -
Hi ,
I am following this weblog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
but stuck up with what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanthID will have only ID under it. instead of creating flat structure like the one above Jin has changed the strucutre below . you will have only ID field in it or you want u can add other fields in it .
Regards
Sreeram.G.Reddy -
Error in Multi-mapping without BPM
Hi frnds,
I am doing a scenario File-XI-File. I am using the multi-splitting thing in the Message mapping. I have taken care of all the occurance's and "enhanced" thing in the IR and ID resp. I m using SP16. I want to avoid BPM.
But therez sme error cming up. When I check the MONI, its shwing "No messages created from split mapping" and when I test my interface using the Test Configuration in the ID, its shwing error in the Receiver Determination -- "HTTP connection to ABAP Runtime failed. Error: 403 Forbidden"
I have checked most of the blogs and forum suggestions. I have checked the ICF activations as well ...
So, do come back to me with your valuable suggestions, and I will award them points, if they really help me out.
Thanks and regards.
NeeteshHi Neetesh,
<i>
When I check the MONI, its shwing "No messages created from split mapping"</i>
For this, Can you check the source XML. Does it contain Tags like <messages> .. If yes, you need to remove them from your source XML.
If i am right, you have copied the XML from the TEST tab of the message mapping and pasted it in a notepad and saved it without making any changes at all..... Just do as i have mentioned above and i am sure you will no more get that error message in your MONI....
Also go through this weblog which talks about multi-mapping without BPM,
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards,
Abhy -
Exception handling for all the insert statements in the proc
CREATE PROCEDURE TEST (
@IncrStartDate DATE
,@IncrEndDate DATE
,@SourceRowCount INT OUTPUT
,@TargetRowCount INT OUTPUT
,@ErrorNumber INT OUTPUT
,@ErrorMessage VARCHAR(4000) OUTPUT
,@InsertCase INT --INSERT CASE INPUT
WITH
EXEC AS CALLER AS
BEGIN --Main Begin
SET NOCOUNT ON
BEGIN TRY
DECLARE @SuccessNumber INT = 0
,@SuccessMessage VARCHAR(100) = 'SUCCESS'
,@BenchMarkLoadFlag CHAR(1)
,@BenchmarkFlow INT
,@MonthYearStart DATE
,@MonthYearEnd DATE
,@StartDate DATE
,@EndDate DATE
/* Setting the default values of output parameters to 0.*/
SET @SourceRowCount = 0
SET @TargetRowCount = 0
/*Setting the Start and end date for looping */
SET @MonthYearStart = @IncrStartDate;
SET @MonthYearEnd = @IncrEndDate;
/* Setting the @InsertCase will ensure case wise insertion as this sp will load data in different tables
@InsertCase =0 means data will be inserted in the target TAB1
@InsertCase =1 means data will be inserted in the target TAB2
@InsertCase =2 means data will be inserted in the target TAB3
@InsertCase =3 means data will be inserted in the target TAB4
@InsertCase =4 means data will be inserted in the target TAB5
@InsertCase =5 means data will be inserted in the target TAB6
if @InsertCase =0
WHILE (@MonthYearStart <= @MonthYearEnd)
BEGIN
SET @StartDate = @MonthYearStart;
SET @EndDate = @MonthYearEnd;
/* Delete from target where date range given from input parameter*/
DELETE FROM TAB1
WHERE [MONTH] BETWEEN MONTH(@StartDate) AND MONTH(@EndDate)
AND [YEAR] BETWEEN year(@StartDate) and year(@EndDate)
/*Insert data in target-TAB1 */
BEGIN TRANSACTION
INSERT INTO TAB1
A,B,C
SELECT
A,BC
FROM XYZ
COMMIT TRANSACTION
SET @MonthYearStart = DATEADD(MONTH, 1, @MonthYearStart)
SELECT @TargetRowCount = @TargetRowCount + @@ROWCOUNT;
END -- End of whileloop
END TRY
BEGIN CATCH
IF @@TRANCOUNT>0
ROLLBACK TRANSACTION
SELECT @ErrorNumber = ERROR_NUMBER() ,@ErrorMessage = ERROR_MESSAGE();
END CATCH
END--End of Main Begin
I have the above proc inserting data based on parameters where in @InsertCase is used for case wise execution.
I have written the whole proc with exception handling using try catch block.
I have just added one insert statement here for 1 case now I need to add further insert cases
INSERT INTO TAB4
A,B,C
SELECT
A,BC
FROM XYZ
INSERT INTO TAB3
A,B,C
SELECT
A,BC
FROM XYZ
INSERT INTO TAB2
A,B,C
SELECT
A,BC
FROM XYZ
I will be using following to insert further insert statements
if @InsertCase =1
I just needed to know where will be my next insert statement should be fitting int his code so that i cover exception handling for all the code
MudassarHi Erland & Mudassar, I have attempted to recreate Mudassar's original problem..here is my TABLE script;
USE [MSDNTSQL]
GO
/****** Object: Table [dbo].[TAB1] Script Date: 2/5/2014 7:47:48 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[TAB1](
[COL1] [nvarchar](1) NULL,
[COL2] [nvarchar](1) NULL,
[COL3] [nvarchar](1) NULL,
[START_MONTH] [int] NULL,
[END_MONTH] [int] NULL,
[START_YEAR] [int] NULL,
[END_YEAR] [int] NULL
) ON [PRIMARY]
GO
Then here is a CREATE script for the SPROC..;
USE [MSDNTSQL]
GO
/****** Object: StoredProcedure [dbo].[TryCatchTransactions1] Script Date: 2/5/2014 7:51:33 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[TryCatchTransactions1] (
@IncrStartDate DATE
,@IncrEndDate DATE
,@SourceRowCount INT OUTPUT
,@TargetRowCount INT OUTPUT
,@ErrorNumber INT OUTPUT
,@ErrorMessage VARCHAR(4000) OUTPUT
,@InsertCase INT --INSERT CASE INPUT
WITH
EXEC AS CALLER AS
BEGIN --Main Begin
SET NOCOUNT ON
BEGIN TRY
DECLARE @SuccessNumber INT = 0
,@SuccessMessage VARCHAR(100) = 'SUCCESS'
,@BenchMarkLoadFlag CHAR(1)
,@BenchmarkFlow INT
,@MonthYearStart DATE
,@MonthYearEnd DATE
,@StartDate DATE
,@EndDate DATE
/* Setting the default values of output parameters to 0.*/
SET @SourceRowCount = 0
SET @TargetRowCount = 0
/*Setting the Start and end date for looping */
SET @MonthYearStart = @IncrStartDate;
SET @MonthYearEnd = @IncrEndDate;
/* Setting the @InsertCase will ensure case wise insertion as this sp will load data in different tables
@InsertCase =0 means data will be inserted in the target TAB1
@InsertCase =1 means data will be inserted in the target TAB2
@InsertCase =2 means data will be inserted in the target TAB3
@InsertCase =3 means data will be inserted in the target TAB4
@InsertCase =4 means data will be inserted in the target TAB5
@InsertCase =5 means data will be inserted in the target TAB6
IF @InsertCase =0
WHILE (@MonthYearStart <= @MonthYearEnd)
BEGIN
SET @StartDate = @MonthYearStart;
SET @EndDate = @MonthYearEnd;
/* Delete from target where date range given from input parameter*/
DELETE FROM TAB1
WHERE START_MONTH BETWEEN MONTH(@StartDate) AND MONTH(@EndDate)
AND START_YEAR BETWEEN year(@StartDate) and YEAR(@EndDate)
/*Insert data in target-TAB1 */
BEGIN TRANSACTION
INSERT INTO TAB1 (COL1,COL2,COL3)
VALUES ('Z','X','Y')
SELECT COL1, COL2, COL3
FROM TAB1
COMMIT TRANSACTION
SET @MonthYearStart = DATEADD(MONTH, 1, @MonthYearStart)
SELECT @TargetRowCount = @TargetRowCount + @@ROWCOUNT;
END -- End of whileloop
END TRY
BEGIN CATCH
IF @@TRANCOUNT > 0
ROLLBACK TRANSACTION
SELECT @ErrorNumber = ERROR_NUMBER() ,@ErrorMessage = ERROR_MESSAGE();
END CATCH
PRINT @SUCCESSMESSAGE
END--End of Main Begin
GO
I am just trying to help --danny rosales
UML, then code -
Exception Handling for many bean objects of a container class in a JSP page
Hello,
I have on container bean class. In this container class, there are several others class objects and the getter methods to get these objects out to the JSP pages.
I have one JSP page which will use different objects in the container class object through the getter methods of the container class.
My question is how to implement the exception handler for all the objects in the container so that the JSP page can handle all exceptions if occurrs in any object in the container?
Please give me some suggestions. Thanks
TuThanks for your reply.
Since the container is the accessor class, I have no other super class for this container class, I think I will try the try catch block in the getter methods. -
Hi Experts,
Can anyone send me a scenario which contains multi-mapping using BPM (collect pattern)........I searched on SDN but cudn't find any scenario which contains Multi-Mapping BPM scenarios. All the scenarios which r available based on without BPM.............points will given to the approriate replies.
Thanks in Advance
FaisalHey
strange you didn't find it,it was the second link when i searched SDN with the string "multimapping BPM"
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanx
Aamir -
Exception handling for ProjectService methods in a new 2006 DI API
Normally for other objects the Add() method returns error code and calling the GetLastError you get the description.
AddProject(Project) method of ProjectService returns ProjectParams object.
So the question is where to get the error code or what is the correct exception handling for that new methods in 2006 SDK.
Thanks for any help.
TomasHi all,
I have a sceranio :
I created the text field, text box, com bobox .etc, on new form or exist form.
When I want to bind data into UDO, i use "DataBind.setBound"
ex:"oEdit.DataBind.SetBound(True, "@SM_OMOR", "U_Room")"
Can i bind the data to exist table on B1?
ex: oEdit.DataBind.setBound(True, "OHEM", "firstName")
Plz guid !
Rgds ! -
May I use Exception Handling for validation ?
Hello All,
Can any one know about that may i use exception handling for validation in my report program.
Please if its possible then give me some Example...
Thanks.Hi Niraj,
Exception is not at all raised or handled in the given example.
There are so many document available in the SCN regarding OO ABAP you can read that.
As far as validation of a field ( Selection screen ) of course we can do that but I don't see any advantage more over it will make your code unnecessarily complex.
Regards
Bikas -
2007A: Exception handling for new ProjectService methods
Normally for other objects the Add() method returns error code and calling the GetLastError you get the description.
AddProject(Project) method of ProjectService returns ProjectParams object.
So the question is where to get the error code or what is the correct exception handling for that new methods in 2006 SDK.
Thanks for any help.
TomasHi Thomas,
For DI API services there is no return code as for the basic objects methods like Add, Update,...
The only way is then to put try/catch blocks in your code and identify the error message with the Exception.Message property (same mechanism as we have for the UI API). No way to filter them by return code.
Regards
Trinidad. -
Multi mapping before BPM and then message routing to different IDocs
I am working on PI 7.0.
I have a scenario where a message from a third party needs to be split and then mapped to multiple IDocs in the target. This decision happens based on an RFC call to SAP ECC. Before the message passes to BPM, I have done a multi mapping to make the RFC call and split the message into multiple messages. Subsequently I have taken a multi line container inside the BPM to receive these messages and process them Parforeach and then a switch is applied to handle the rest of the scenario.
Problem is when I am trying to execute the scenario, it fails in first step(multi mapping) before the BPM, it is not able to create the node for the multiple message.
To explain a bit more, Message type say M1 is linked to Message interface MI1_OB. Then I have created an abstract message interface MI1_ABS and made it as 0---unbounded. Similarly in the message mapping I have changed the occurrence of the target message type (same as source message type)Hi Ambrish Mishra,
Please check "Performing Several Multi-Mappings in a Series" [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm] . According it, second mapping should be able to accept this structure as input
<?xml version="1.0" encoding="UTF-8"?>
<sm:Messages xmlns:sm="http://sap.com/xi/XI/SplitAndMerge">
<Message1>
</Message1>
<MessageN>
</MessageN>
</sm:Messages>
Regards,
Raghu_Vamsee
Maybe you are looking for
-
URGENT: Problems with the CREATE JAVA command in SQL
I am trying to publish a Java class to the database and have to use CREATE JAVA rather than loadjava for reasons I won't go into. However, I get the following error: SQL> create java class using bfile ('C:\neil', 'SkyNetworkRequestUtil.class'); creat
-
Deployment Error in Weblogic 9.2
Hi, We are trying to deploy an ear file in Weblogic 9.2 and we are getting the following error in the console - Unable to access the selected application. Exception in AppMerge flows' progression. I have seen from some other posts that doing "java we
-
Roaming not working (with triangle full bar signal in screen)
Hello, I am out of US - currently in India and I am having big-time trouble making my phone work for Roaming. Its Galaxy S3. I have enabled global plan (outside us calls/messages/data on my plan online). But my phone is still unable to call to US and
-
can anyone post some common errors document in XI to [email protected]
-
When executing query...in the result i want to display each row values
Hi All, When executing query...in the result area i want to display each row values. Example: query result is like this Business Area Sales Material kh02 1000 2000 2000 300