Exception handling in report

Hello all,
i want oto implement exception handling in report.
scenario:
i have a parameter form par.fmb
i provide parameter on form then call the report.
if there is some error generate while query of report then how to handle it, so that user get the message.
below query is used in report:
SELECT SPC_ITEM_CODE,GENERATE_ITEM_NAME(SPC_ITEM_CODE),MOD_DATE,OBU,REQ_NO,REQ_QTY,OQC_QTY,SPC_ITEM_QTY,process
, INSP_LOT_SIZE,REMARKS,INSP_STATUS
FROM OQC_DATA
WHERE (REQ_NO=:REQ_NO OR :REQ_NO IS NULL) AND trunc(MOD_DATE) BETWEEN :FROM_DATE AND :TO_DATE
AND SPC_LOCN_CODE=:LOCN_CODE
ORDER BY REQ_NO,SPC_ITEM_CODE
here: GENERATE_ITEM_NAME(SPC_ITEM_CODE) is database function.
as spc_item_code is column in OQC_DATA table, it any how there is null value in spc_item_code then error will raise, i and want to handle this error sothat ,
i found the reason.
Thanks
yash
Edited by: yash_08031983 on Jan 27, 2012 9:11 PM

yash_08031983 wrote:
Hello all,
i want oto implement exception handling in report.
scenario:
i have a parameter form par.fmb
i provide parameter on form then call the report.
if there is some error generate while query of report then how to handle it, so that user get the message.
below query is used in report:
SELECT SPC_ITEM_CODE,GENERATE_ITEM_NAME(SPC_ITEM_CODE),MOD_DATE,OBU,REQ_NO,REQ_QTY,OQC_QTY,SPC_ITEM_QTY,process
, INSP_LOT_SIZE,REMARKS,INSP_STATUS
FROM OQC_DATA
WHERE (REQ_NO=:REQ_NO OR :REQ_NO IS NULL) AND trunc(MOD_DATE) BETWEEN :FROM_DATE AND :TO_DATE
AND SPC_LOCN_CODE=:LOCN_CODE
ORDER BY REQ_NO,SPC_ITEM_CODE
here: GENERATE_ITEM_NAME(SPC_ITEM_CODE) is database function.
as spc_item_code is column in OQC_DATA table, it any how there is null value in spc_item_code then error will raise, i and want to handle this error sothat ,
i found the reason.You can handle the error in two way.
First from the function, you can use exception in it and through 0(zero) if it didn't get any value.
2nd use nvl function in the sql like nvl(GENERATE_ITEM_NAME(SPC_ITEM_CODE),0) if number data type or NVL(GENERATE_ITEM_NAME(SPC_ITEM_CODE),'n/a') if char data type output.
You can also use decode.
Hope this will help you.

Similar Messages

Exception Handling IR Report

hi there,
I have an interactive report, the SQL for which could fail for a number of reasons, is there any way to catch the individual exceptions and display a meaningful error message.
Thanks...

Hi Aparm,
You can create an apex collection and build your interactive report on top of this collection. Create a PL-SQL process which will get executed before page header and populate collection data using your currect report query, you can handle all the exceptions in this process and display them using meaning error message.
Search for apex collection or look at the apex documents to see examples of apex collections.
Thanks,
Manish

Exception handling in ORA REPORT

hi,
can any one tell about exception handling in oracle reports 10g if I wanna raise a message where data is no not present for example I select one value from LOV when I press mouse button and if data is not present then
report show numeric or value error but I want here raise a message box I use this [ in before_report_trigger exception no_data_found then srw.message(10,'data not found') ] after use this value or numeric error is vanished but my message box is not raise I also use dbms_output.put_line('data not found') or srw.message(10,'data not found') srw.message(10,'data not found') but message box not show any please tell me about this.thanks
Regards,
shaz khan

dbms_output.put_lineYou can only use this in sqlplus.
srw.messageThis writes a message to the log file (see traceopts in the online help).
report show numeric or value errorThat means there is something wrong in one of your procedures. You should never get an error like that.
When exactly do you get this error?

How to handle Exceptions in Oracle Report Builder 10.1.2.0.2?

We are using Oracle Reports Builder 10g 10.1.2.0.2, Windows XP with Oracle 10g database. The reports are converted into JSP reports.
How and where do we write exception handling code in Reports Builder? We want to achieve the following:
1. Display a customized JSP page with customized error message
2. Allow users to cancel the report execution, if possible and then direct them to the parameter form with all the values they entered before.
Once we write these codes in the Oracle Report Builder where will it show in .jsp files?
Thanks
Hemant

this link may be helpful:
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/whatare/pformobj/a_pf_web.htm

MC.9 and MCY1 and Exception Handling in (Logistics Inf. Sys)LIS

Hi,
I want the 'Valuated Stock Value" greater then or equal to zero (>=) appear in the MC.9 report. I can create 'Exception' in MCY1 but am unable to do so. Once I am in MCY1; I choose 'Requirements' then Key Figure 'Valuated Stock Value' then 'Type of condition' is 'Threshold Val. Anal.' is set to '> 0'. However, the report still displays zero values in MC.9. I don't want to display 'Valuated Stock Value' zero to be displayed on the report. Please help.
Thanks
Naved

Hey Chris,
I got the point for exception handling in weblogic 9.2. We ae using 9.2. It comes up with the concept of shared page flows which means all my unhandled exceptions are thrown to the shared page flow controller. There based on the type of exception, i can forward the request to appropraite page.
Thanks anywyas,
Saurabh

PL/SQL 101 : Exception Handling

Frequently I see questions and issues around the use of Exception/Error Handling in PL/SQL. More often than not the issue comes from the questioners misunderstanding about how PL/SQL is constructed and executed, so I thought I'd write a small article covering the key concepts to give a clear picture of how it all hangs together. (Note: the examples are just showing examples of the exception handling structure, and should not be taken as truly valid code for ways of handling things)
Exception Handling
Contents
1. Understanding Execution Blocks (part 1)
2. Execution of the Execution Block
3. Exceptions
4. Understanding Execution Blocks (part 2)
5. How to continue exection of statements after an exception
6. User defined exceptions
7. Line number of exception
8. Exceptions within code within the exception block
1. Understanding Execution Blocks (part 1)
The first thing that one needs to understand is almost taking us back to the basics of PL/SQL... how a PL/SQL execution block is constructed.
Essentially an execution block is made of 3 sections...
+---------------------------+
| Declaration Section |
+---------------------------+
| Statements Section |
+---------------------------+
| Exception Section |
+---------------------------+
The Declaration section is the part defined between the PROCEDURE/FUNCTION header or the DECLARE keyword (for anonymous blocks) and the BEGIN keyword. (Optional section)
The Statements section is where your code goes and lies between the BEGIN keyword and the EXCEPTION keyword (or END keyword if there is no EXCEPTION section). (Mandatory section)
The Exception section is where any exception handling goes and lies between the EXCEPTION keyword at the END keyword. (Optional section)
Example of an anonymous block...
DECLARE
.. declarative statements go here ..
BEGIN
.. code statements go here ..
EXCEPTION
.. exception handlers go here ..
END;
Example of a procedure/function block...
[CREATE OR REPLACE] (PROCEDURE|FUNCTION) <proc or fn name> [(<parameters>)] [RETURN <datatype>] (IS|AS)
.. declarative statements go here ..
BEGIN
.. code statements go here ..
EXCEPTION
.. exception handlers go here ..
END;
(Note: The same can also be done for packages, but let's keep it simple)
2. Execution of the Execution Block
This may seem a simple concept, but it's surprising how many people have issues showing they haven't grasped it. When an Execution block is entered, the declaration section is processed, creating a scope of variables, types , cursors, etc. to be visible to the execution block and then execution enters into the Statements section. Each statment in the statements section is executed in turn and when the execution completes the last statment the execution block is exited back to whatever called it.
3. Exceptions
Exceptions generally happen during the execution of statements in the Statements section. When an exception happens the execution of statements jumps immediately into the exception section. In this section we can specify what exceptions we wish to 'capture' or 'trap' and do one of the two following things...
(Note: The exception section still has access to all the declared items in the declaration section)
3.i) Handle the exception
We do this when we recognise what the exception is (most likely it's something we expect to happen) and we have a means of dealing with it so that our application can continue on.
Example...
(without the exception handler the exception is passed back to the calling code, in this case SQL*Plus)
SQL> ed
Wrote file afiedt.buf
1 declare
2 v_name VARCHAR2(20);
3 begin
4 select ename
5 into v_name
6 from emp
7 where empno = &empno;
8 dbms_output.put_line(v_name);
9* end;
SQL> /
Enter value for empno: 123
old 7: where empno = &empno;
new 7: where empno = 123;
declare
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 4
(with an exception handler, we capture the exception, handle it how we want to, and the calling code is happy that there is no error for it to report)
SQL> ed
Wrote file afiedt.buf
1 declare
2 v_name VARCHAR2(20);
3 begin
4 select ename
5 into v_name
6 from emp
7 where empno = &empno;
8 dbms_output.put_line(v_name);
9 exception
10 when no_data_found then
11 dbms_output.put_line('There is no employee with this employee number.');
12* end;
SQL> /
Enter value for empno: 123
old 7: where empno = &empno;
new 7: where empno = 123;
There is no employee with this employee number.
PL/SQL procedure successfully completed.
3.ii) Raise the exception
We do this when:-
a) we recognise the exception, handle it but still want to let the calling code know that it happened
b) we recognise the exception, wish to log it happened and then let the calling code deal with it
c) we don't recognise the exception and we want the calling code to deal with it
Example of b)
SQL> ed
Wrote file afiedt.buf
1 declare
2 v_name VARCHAR2(20);
3 v_empno NUMBER := &empno;
4 begin
5 select ename
6 into v_name
7 from emp
8 where empno = v_empno;
9 dbms_output.put_line(v_name);
10 EXCEPTION
11 WHEN no_data_found THEN
12 INSERT INTO sql_errors (txt)
13 VALUES ('Search for '||v_empno||' failed.');
14 COMMIT;
15 RAISE;
16* end;
SQL> /
Enter value for empno: 123
old 3: v_empno NUMBER := &empno;
new 3: v_empno NUMBER := 123;
declare
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 15
SQL> select * from sql_errors;
TXT
Search for 123 failed.
SQL>
Example of c)
SQL> ed
Wrote file afiedt.buf
1 declare
2 v_name VARCHAR2(20);
3 v_empno NUMBER := &empno;
4 begin
5 select ename
6 into v_name
7 from emp
8 where empno = v_empno;
9 dbms_output.put_line(v_name);
10 EXCEPTION
11 WHEN no_data_found THEN
12 INSERT INTO sql_errors (txt)
13 VALUES ('Search for '||v_empno||' failed.');
14 COMMIT;
15 RAISE;
16 WHEN others THEN
17 RAISE;
18* end;
SQL> /
Enter value for empno: 'ABC'
old 3: v_empno NUMBER := &empno;
new 3: v_empno NUMBER := 'ABC';
declare
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at line 3
SQL> select * from sql_errors;
TXT
Search for 123 failed.
SQL>
As you can see from the sql_errors log table, no log was written so the WHEN others exception was the exception that raised the error to the calling code (SQL*Plus)
4. Understanding Execution Blocks (part 2)
Ok, so now we understand the very basics of an execution block and what happens when an exception happens. Let's take it a step further...
Execution blocks are not just a single simple block in most cases. Often, during our statements section we have a need to call some reusable code and we do that by calling a procedure or function. Effectively this nests the procedure or function's code as another execution block within the current statement section so, in terms of execution, we end up with something like...
+---------------------------------+
| Declaration Section |
+---------------------------------+
| Statements Section |
| . |
| +---------------------------+ |
| | Declaration Section | |
| +---------------------------+ |
| | Statements Section | |
| +---------------------------+ |
| | Exception Section | |
| +---------------------------+ |
| . |
+---------------------------------+
| Exception Section |
+---------------------------------+
Example... (Note: log_trace just writes some text to a table for tracing)
SQL> create or replace procedure a as
2 v_dummy NUMBER := log_trace('Procedure A''s Declaration Section');
3 begin
4 v_dummy := log_trace('Procedure A''s Statement Section');
5 v_dummy := 1/0; -- cause an exception
6 exception
7 when others then
8 v_dummy := log_trace('Procedure A''s Exception Section');
9 raise;
10 end;
11 /
Procedure created.
SQL> create or replace procedure b as
2 v_dummy NUMBER := log_trace('Procedure B''s Declaration Section');
3 begin
4 v_dummy := log_trace('Procedure B''s Statement Section');
5 a; -- HERE the execution passes to the declare/statement/exception sections of A
6 exception
7 when others then
8 v_dummy := log_trace('Procedure B''s Exception Section');
9 raise;
10 end;
11 /
Procedure created.
SQL> exec b;
BEGIN b; END;
ERROR at line 1:
ORA-01476: divisor is equal to zero
ORA-06512: at "SCOTT.B", line 9
ORA-06512: at line 1
SQL> select * from code_trace;
TXT
Procedure B's Declaration Section
Procedure B's Statement Section
Procedure A's Declaration Section
Procedure A's Statement Section
Procedure A's Exception Section
Procedure B's Exception Section
6 rows selected.
SQL>
Likewise, execution blocks can be nested deeper and deeper.
5. How to continue exection of statements after an exception
One of the common questions asked is how to return execution to the statement after the one that created the exception and continue on.
Well, firstly, you can only do this for statements you expect to raise an exception, such as when you want to check if there is no data found in a query.
If you consider what's been shown above you could put any statement you expect to cause an exception inside it's own procedure or function with it's own exception section to handle the exception without raising it back to the calling code. However, the nature of procedures and functions is really to provide a means of re-using code, so if it's a statement you only use once it seems a little silly to go creating individual procedures for these.
Instead, you nest execution blocks directly, to give the same result as shown in the diagram at the start of part 4 of this article.
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure b (p_empno IN VARCHAR2) as
2 v_dummy NUMBER := log_trace('Procedure B''s Declaration Section');
3 begin
4 v_dummy := log_trace('Procedure B''s Statement Section');
5 -- Here we start another execution block nested in the first one...
6 declare
7 v_dummy NUMBER := log_trace('Nested Block Declaration Section');
8 begin
9 v_dummy := log_trace('Nested Block Statement Section');
10 select empno
11 into v_dummy
12 from emp
13 where empno = p_empno; -- Note: the parameters and variables from
 parent execution block are available to use!
14 exception
15 when no_data_found then
16 -- This is an exception we can handle so we don't raise it
17 v_dummy := log_trace('No employee was found');
18 v_dummy := log_trace('Nested Block Exception Section - Exception Handled');
19 when others then
20 -- Other exceptions we can't handle so we raise them
21 v_dummy := log_trace('Nested Block Exception Section - Exception Raised');
22 raise;
23 end;
24 -- ...Here endeth the nested execution block
25 -- As the nested block handled it's exception we come back to here...
26 v_dummy := log_trace('Procedure B''s Statement Section Continued');
27 exception
28 when others then
29 -- We'll only get to here if an unhandled exception was raised
30 -- either in the nested block or in procedure b's statement section
31 v_dummy := log_trace('Procedure B''s Exception Section');
32 raise;
33* end;
SQL> /
Procedure created.
SQL> exec b(123);
PL/SQL procedure successfully completed.
SQL> select * from code_trace;
TXT
Procedure B's Declaration Section
Procedure B's Statement Section
Nested Block Declaration Section
Nested Block Statement Section
No employee was found
Nested Block Exception Section - Exception Handled
Procedure B's Statement Section Continued
7 rows selected.
SQL> truncate table code_trace;
Table truncated.
SQL> exec b('ABC');
BEGIN b('ABC'); END;
ERROR at line 1:
ORA-01722: invalid number
ORA-06512: at "SCOTT.B", line 32
ORA-06512: at line 1
SQL> select * from code_trace;
TXT
Procedure B's Declaration Section
Procedure B's Statement Section
Nested Block Declaration Section
Nested Block Statement Section
Nested Block Exception Section - Exception Raised
Procedure B's Exception Section
6 rows selected.
SQL>
You can see from this that, very simply, the code that we expected may have an exception was able to either handle the exception and return to the outer execution block to continue execution, or if an unexpected exception occurred then it was able to be raised up to the outer exception section.
6. User defined exceptions
There are three sorts of 'User Defined' exceptions. There are logical situations (e.g. business logic) where, for example, certain criteria are not met to complete a task, and there are existing Oracle errors that you wish to give a name to in order to capture them in the exception section. The third is raising your own exception messages with our own exception numbers. Let's look at the first one...
Let's say I have tables which detail stock availablility and reorder levels...
SQL> select * from reorder_level;
 ITEM_ID STOCK_LEVEL
 1 20
 2 20
 3 10
 4 2
 5 2
SQL> select * from stock;
 ITEM_ID ITEM_DESC STOCK_LEVEL
 1 Pencils 10
 2 Pens 2
 3 Notepads 25
 4 Stapler 5
 5 Hole Punch 3
SQL>
Now, our Business has told the administrative clerk to check stock levels and re-order anything that is below the re-order level, but not to hold stock of more than 4 times the re-order level for any particular item. As an IT department we've been asked to put together an application that will automatically produce the re-order documents upon the clerks request and, because our company is so tight-ar*ed about money, they don't want to waste any paper with incorrect printouts so we have to ensure the clerk can't order things they shouldn't.
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure re_order(p_item_id NUMBER, p_quantity NUMBER) is
2 cursor cur_stock_reorder is
3 select s.stock_level
4 ,r.stock_level as reorder_level
5 ,(r.stock_level*4) as reorder_limit
6 from stock s join reorder_level r on (s.item_id = r.item_id)
7 where s.item_id = p_item_id;
8 --
9 v_stock cur_stock_reorder%ROWTYPE;
10 begin
11 OPEN cur_stock_reorder;
12 FETCH cur_stock_reorder INTO v_stock;
13 IF cur_stock_reorder%NOTFOUND THEN
14 RAISE no_data_found;
15 END IF;
16 CLOSE cur_stock_reorder;
17 --
18 IF v_stock.stock_level >= v_stock.reorder_level THEN
19 -- Stock is not low enough to warrant an order
20 DBMS_OUTPUT.PUT_LINE('Stock has not reached re-order level yet!');
21 ELSE
22 IF v_stock.stock_level + p_quantity > v_stock.reorder_limit THEN
23 -- Required amount is over-ordering
24 DBMS_OUTPUT.PUT_LINE('Quantity specified is too much. Max for this item: '
 ||to_char(v_stock.reorder_limit-v_stock.stock_level));
25 ELSE
26 DBMS_OUTPUT.PUT_LINE('Order OK. Printing Order...');
27 -- Here goes our code to print the order
28 END IF;
29 END IF;
30 --
31 exception
32 WHEN no_data_found THEN
33 CLOSE cur_stock_reorder;
34 DBMS_OUTPUT.PUT_LINE('Invalid Item ID.');
35* end;
SQL> /
Procedure created.
SQL> exec re_order(10,100);
Invalid Item ID.
PL/SQL procedure successfully completed.
SQL> exec re_order(3,40);
Stock has not reached re-order level yet!
PL/SQL procedure successfully completed.
SQL> exec re_order(1,100);
Quantity specified is too much. Max for this item: 70
PL/SQL procedure successfully completed.
SQL> exec re_order(2,50);
Order OK. Printing Order...
PL/SQL procedure successfully completed.
SQL>
Ok, so that code works, but it's a bit messy with all those nested IF statements. Is there a cleaner way perhaps? Wouldn't it be nice if we could set up our own exceptions...
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure re_order(p_item_id NUMBER, p_quantity NUMBER) is
2 cursor cur_stock_reorder is
3 select s.stock_level
4 ,r.stock_level as reorder_level
5 ,(r.stock_level*4) as reorder_limit
6 from stock s join reorder_level r on (s.item_id = r.item_id)
7 where s.item_id = p_item_id;
8 --
9 v_stock cur_stock_reorder%ROWTYPE;
10 --
11 -- Let's declare our own exceptions for business logic...
12 exc_not_warranted EXCEPTION;
13 exc_too_much EXCEPTION;
14 begin
15 OPEN cur_stock_reorder;
16 FETCH cur_stock_reorder INTO v_stock;
17 IF cur_stock_reorder%NOTFOUND THEN
18 RAISE no_data_found;
19 END IF;
20 CLOSE cur_stock_reorder;
21 --
22 IF v_stock.stock_level >= v_stock.reorder_level THEN
23 -- Stock is not low enough to warrant an order
24 RAISE exc_not_warranted;
25 END IF;
26 --
27 IF v_stock.stock_level + p_quantity > v_stock.reorder_limit THEN
28 -- Required amount is over-ordering
29 RAISE exc_too_much;
30 END IF;
31 --
32 DBMS_OUTPUT.PUT_LINE('Order OK. Printing Order...');
33 -- Here goes our code to print the order
34 --
35 exception
36 WHEN no_data_found THEN
37 CLOSE cur_stock_reorder;
38 DBMS_OUTPUT.PUT_LINE('Invalid Item ID.');
39 WHEN exc_not_warranted THEN
40 DBMS_OUTPUT.PUT_LINE('Stock has not reached re-order level yet!');
41 WHEN exc_too_much THEN
42 DBMS_OUTPUT.PUT_LINE('Quantity specified is too much. Max for this item: '
 ||to_char(v_stock.reorder_limit-v_stock.stock_level));
43* end;
SQL> /
Procedure created.
SQL> exec re_order(10,100);
Invalid Item ID.
PL/SQL procedure successfully completed.
SQL> exec re_order(3,40);
Stock has not reached re-order level yet!
PL/SQL procedure successfully completed.
SQL> exec re_order(1,100);
Quantity specified is too much. Max for this item: 70
PL/SQL procedure successfully completed.
SQL> exec re_order(2,50);
Order OK. Printing Order...
PL/SQL procedure successfully completed.
SQL>
That's better. And now we don't have to use all those nested IF statements and worry about it accidently getting to code that will print the order out as, once one of our user defined exceptions is raised, execution goes from the Statements section into the Exception section and all handling of errors is done in one place.
Now for the second sort of user defined exception...
A new requirement has come in from the Finance department who want to have details shown on the order that show a re-order 'indicator' based on the formula ((maximum allowed stock - current stock)/re-order quantity), so this needs calculating and passing to the report...
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure re_order(p_item_id NUMBER, p_quantity NUMBER) is
2 cursor cur_stock_reorder is
3 select s.stock_level
4 ,r.stock_level as reorder_level
5 ,(r.stock_level*4) as reorder_limit
6 ,(((r.stock_level*4)-s.stock_level)/p_quantity) as finance_factor
7 from stock s join reorder_level r on (s.item_id = r.item_id)
8 where s.item_id = p_item_id;
9 --
10 v_stock cur_stock_reorder%ROWTYPE;
11 --
12 -- Let's declare our own exceptions for business logic...
13 exc_not_warranted EXCEPTION;
14 exc_too_much EXCEPTION;
15 begin
16 OPEN cur_stock_reorder;
17 FETCH cur_stock_reorder INTO v_stock;
18 IF cur_stock_reorder%NOTFOUND THEN
19 RAISE no_data_found;
20 END IF;
21 CLOSE cur_stock_reorder;
22 --
23 IF v_stock.stock_level >= v_stock.reorder_level THEN
24 -- Stock is not low enough to warrant an order
25 RAISE exc_not_warranted;
26 END IF;
27 --
28 IF v_stock.stock_level + p_quantity > v_stock.reorder_limit THEN
29 -- Required amount is over-ordering
30 RAISE exc_too_much;
31 END IF;
32 --
33 DBMS_OUTPUT.PUT_LINE('Order OK. Printing Order...');
34 -- Here goes our code to print the order, passing the finance_factor
35 --
36 exception
37 WHEN no_data_found THEN
38 CLOSE cur_stock_reorder;
39 DBMS_OUTPUT.PUT_LINE('Invalid Item ID.');
40 WHEN exc_not_warranted THEN
41 DBMS_OUTPUT.PUT_LINE('Stock has not reached re-order level yet!');
42 WHEN exc_too_much THEN
43 DBMS_OUTPUT.PUT_LINE('Quantity specified is too much. Max for this item: '
 ||to_char(v_stock.reorder_limit-v_stock.stock_level));
44* end;
SQL> /
Procedure created.
SQL> exec re_order(2,40);
Order OK. Printing Order...
PL/SQL procedure successfully completed.
SQL> exec re_order(2,0);
BEGIN re_order(2,0); END;
ERROR at line 1:
ORA-01476: divisor is equal to zero
ORA-06512: at "SCOTT.RE_ORDER", line 17
ORA-06512: at line 1
SQL>
Hmm, there's a problem if the person specifies a re-order quantity of zero. It raises an unhandled exception.
Well, we could put a condition/check into our code to make sure the parameter is not zero, but again we would be wrapping our code in an IF statement and not dealing with the exception in the exception handler.
We could do as we did before and just include a simple IF statement to check the value and raise our own user defined exception but, in this instance the error is standard Oracle error (ORA-01476) so we should be able to capture it inside the exception handler anyway... however...
EXCEPTION
WHEN ORA-01476 THEN
... is not valid. What we need is to give this Oracle error a name.
This is done by declaring a user defined exception as we did before and then associating that name with the error number using the PRAGMA EXCEPTION_INIT statement in the declaration section.
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure re_order(p_item_id NUMBER, p_quantity NUMBER) is
2 cursor cur_stock_reorder is
3 select s.stock_level
4 ,r.stock_level as reorder_level
5 ,(r.stock_level*4) as reorder_limit
6 ,(((r.stock_level*4)-s.stock_level)/p_quantity) as finance_factor
7 from stock s join reorder_level r on (s.item_id = r.item_id)
8 where s.item_id = p_item_id;
9 --
10 v_stock cur_stock_reorder%ROWTYPE;
11 --
12 -- Let's declare our own exceptions for business logic...
13 exc_not_warranted EXCEPTION;
14 exc_too_much EXCEPTION;
15 --
16 exc_zero_quantity EXCEPTION;
17 PRAGMA EXCEPTION_INIT(exc_zero_quantity, -1476);
18 begin
19 OPEN cur_stock_reorder;
20 FETCH cur_stock_reorder INTO v_stock;
21 IF cur_stock_reorder%NOTFOUND THEN
22 RAISE no_data_found;
23 END IF;
24 CLOSE cur_stock_reorder;
25 --
26 IF v_stock.stock_level >= v_stock.reorder_level THEN
27 -- Stock is not low enough to warrant an order
28 RAISE exc_not_warranted;
29 END IF;
30 --
31 IF v_stock.stock_level + p_quantity > v_stock.reorder_limit THEN
32 -- Required amount is over-ordering
33 RAISE exc_too_much;
34 END IF;
35 --
36 DBMS_OUTPUT.PUT_LINE('Order OK. Printing Order...');
37 -- Here goes our code to print the order, passing the finance_factor
38 --
39 exception
40 WHEN exc_zero_quantity THEN
41 DBMS_OUTPUT.PUT_LINE('Quantity of 0 (zero) is invalid.');
42 WHEN no_data_found THEN
43 CLOSE cur_stock_reorder;
44 DBMS_OUTPUT.PUT_LINE('Invalid Item ID.');
45 WHEN exc_not_warranted THEN
46 DBMS_OUTPUT.PUT_LINE('Stock has not reached re-order level yet!');
47 WHEN exc_too_much THEN
48 DBMS_OUTPUT.PUT_LINE('Quantity specified is too much. Max for this item: '
 ||to_char(v_stock.reorder_limit-v_stock.stock_level));
49* end;
SQL> /
Procedure created.
SQL> exec re_order(2,0);
Quantity of 0 (zero) is invalid.
PL/SQL procedure successfully completed.
SQL>
Lastly, let's look at raising our own exceptions with our own exception numbers...
SQL> ed
Wrote file afiedt.buf
1 create or replace procedure re_order(p_item_id NUMBER, p_quantity NUMBER) is
2 cursor cur_stock_reorder is
3 select s.stock_level
4 ,r.stock_level as reorder_level
5 ,(r.stock_level*4) as reorder_limit
6 ,(((r.stock_level*4)-s.stock_level)/p_quantity) as finance_factor
7 from stock s join reorder_level r on (s.item_id = r.item_id)
8 where s.item_id = p_item_id;
9 --
10 v_stock cur_stock_reorder%ROWTYPE;
11 --
12 exc_zero_quantity EXCEPTION;
13 PRAGMA EXCEPTION_INIT(exc_zero_quantity, -1476);
14 begin
15 OPEN cur_stock_reorder;
16 FETCH cur_stock_reorder INTO v_stock;
17 IF cur_stock_reorder%NOTFOUND THEN
18 RAISE no_data_found;
19 END IF;
20 CLOSE cur_stock_reorder;
21 --
22 IF v_stock.stock_level >= v_stock.reorder_level THEN
23 -- Stock is not low enough to warrant an order
24 [b]RAISE_APPLICATION_ERROR(-20000, 'Stock has not reached re-order level yet!');[/b]
25 END IF;
26 --
27 IF v_stock.stock_level + p_quantity > v_stock.reorder_limit THEN
28 -- Required amount is over-ordering
29

its nice article, have put up this one the blog
site,Nah, I don't have time to blog, but if one of the other Ace's/Experts wants to copy it to a blog with reference back to here (and all due credit given ;)) then that's fine by me.
I'd go for a book like "Selected articles by OTN members" or something. Does anybody have a list of links of all those mentioned articles?Just these ones I've bookmarked...
Introduction to regular expressions ... by CD
When your query takes too long ... by Rob van Wijk
How to pipeline a function with a dynamic number of columns? by ascheffer
PL/SQL 101 : Exception Handling by BluShadow

Issue with exception Handling in GG

Hi,
I have bi-directional DML replication setup. I have written a code in replication parameter for handling the exception , Exception handling is working fine my replicate process is not getting ABENDED but Issue is I am not geeting any rows in EXCEPTION table.I had gone through replicat report, there I had seen GG is trying to inser duplicate records in EXCEPTION TABLE and it is failing because of that .
**Command for create Exception Table is-**
create table ggs_admin.exceptions (
rep_name varchar2(8) ,
table_name varchar2(61) ,
errno number ,
dberrmsg varchar2(4000) ,
optype varchar2(20) ,
errtype varchar2(20) ,
logrba number ,
logposition number ,
committimestamp timestamp,
CONSTRAINT pk_exceptions PRIMARY KEY (logrba, logposition, committimestamp)
USING INDEX
TABLESPACE INDX1
TABLESPACE dbdat1
My replication parameter is-
GGSCI (db) 1> view params rep2
-- Replicator parameter file to apply changes
REPLICAT rep2
ASSUMETARGETDEFS
USERID ggs_admin, PASSWORD ggs_admin
DISCARDFILE /u01/app/oracle/product/gg/dirdat/rep2_discard.dsc, PURGE
-- Start of the macro
MACRO #exception_handler
BEGIN
, TARGET ggs_admin.exceptions
, COLMAP ( rep_name = "REP2"
, table_name = @GETENV ("GGHEADER", "TABLENAME")
, errno = @GETENV ("LASTERR", "DBERRNUM")
, dberrmsg = @GETENV ("LASTERR", "DBERRMSG")
, optype = @GETENV ("LASTERR", "OPTYPE")
, errtype = @GETENV ("LASTERR", "ERRTYPE")
, logrba = @GETENV ("GGHEADER", "LOGRBA")
, logposition = @GETENV ("GGHEADER", "LOGPOSITION")
, committimestamp = @GETENV ("GGHEADER", "COMMITTIMESTAMP"))
, INSERTALLRECORDS
, EXCEPTIONSONLY;
END;
-- End of the macro
REPERROR (DEFAULT, EXCEPTION)
--REPERROR (-1, EXCEPTION)
--REPERROR (-1403, EXCEPTION)
MAP scr.order_items, TARGET scr.order_items;
MAP scr.order_items #exception_handler();
GGSCI (db) 2>view params rep2
MAP resolved (entry scr.order_items):
MAP "scr"."order_items" TARGET ggs_admin.exceptions , COLMAP ( rep_name = "REP2" , table_name = @GETENV ("GGHEADER", "TABLENAME") , errno = @GETENV ("LASTERR", "DB
ERRNUM") , dberrmsg = @GETENV ("LASTERR", "DBERRMSG") , optype = @GETENV ("LASTERR", "OPTYPE") , errtype = @GETENV ("LASTERR", "ERRTYPE") , logrba = @GETENV ("GGHEADER"
, "LOGRBA") , logposition = @GETENV ("GGHEADER", "LOGPOSITION") , committimestamp = @GETENV ("GGHEADER", "COMMITTIMESTAMP")) , INSERTALLRECORDS , EXCEPTIONSONLY;;
Using the following key columns for target table GGS_ADMIN.EXCEPTIONS: LOGRBA, LOGPOSITION, COMMITTIMESTAMP.
2012-08-30 09:09:00 WARNING OGG-01154 SQL error 1403 mapping scr.order_items to scr.order_items OCI Error ORA-01403: no data found, SQL <DELETE FROM "scr"."order_items" WHERE "SUBSCRIBER_ID" = :b0>.
2012-08-30 09:09:00 WARNING OGG-00869 OCI Error ORA-00001: unique constraint (GGS_ADMIN.PK_EXCEPTIONS) violated (status = 1). INSERT INTO "GGS_ADMIN"."EXCEPTIONS" ("R
EP_NAME","TABLE_NAME","ERRNO","DBERRMSG","OPTYPE","ERRTYPE","LOGRBA","LOGPOSITION","COMMITTIMESTAMP") VALUES (:a0,:a1,:a2,:a3,:a4,:a5,:a6,:a7,:a8).
2012-08-30 09:09:00 WARNING OGG-01004 Aborted grouped transaction on 'GGS_ADMIN.EXCEPTIONS', Database error 1 (OCI Error ORA-00001: unique constraint (GGS_ADMIN.PK_EX
CEPTIONS) violated (status = 1). INSERT INTO "GGS_ADMIN"."EXCEPTIONS" ("REP_NAME","TABLE_NAME","ERRNO","DBERRMSG","OPTYPE","ERRTYPE","LOGRBA","LOGPOSITION","COMMITTIMES
TAMP") VALUES (:a0,:a1,:a2,:a3,:a4,:a5,:a6,:a7,:a8)).
2012-08-30 09:09:00 WARNING OGG-01003 Repositioning to rba 92383 in seqno 8.
2012-08-30 09:09:00 WARNING OGG-01154 SQL error 1403 mapping scr.order_items to scr.order_items OCI Error ORA-01403: no data found, SQL <DELETE FROM "scr"."order_items" WHERE "SUBSCRIBER_ID" = :b0>.
2012-08-30 09:09:00 WARNING OGG-01154 SQL error 1 mapping scr.order_items to GGS_ADMIN.EXCEPTIONS OCI Error ORA-00001: unique constraint (GGS_ADMIN.PK_EXCEPTIONS)
violated (status = 1). INSERT INTO "GGS_ADMIN"."EXCEPTIONS" ("REP_NAME","TABLE_NAME","ERRNO","DBERRMSG","OPTYPE","ERRTYPE","LOGRBA","LOGPOSITION","COMMITTIMESTAMP") VAL
UES (:a0,:a1,:a2,:a3,:a4,:a5,:a6,:a7,:a8).
2012-08-30 09:09:00 WARNING OGG-01003 Repositioning to rba 92383 in seqno 8.
When I am running command
select * from exceptions;
no row selected.
Please help. Why duplicat rows trying to insert in Exception table.

Remove (disable) the constraint on the exceptions table and see if inserts will take place. Do you really need that primary key?

Exception handling for Null/Incorrect input parameters

Hi,
My BI Publisher report has input parameter name as <region>. It is a text field and is mandatory parameter.
But if I run the report without giving value to the parameter it gives the error "The report cannot be rendered because of an error, please contact the administrator."
How can I handle this scenario so that User defined message is displayed, asking user to give correct input.
I am using Oracle BI Publisher 10.1.3.3.3
Is there some documentation available for Exception Handling/How to display User defined messages in case of error?
My requirement is that after displaying the error message (say for example "Please enter Region name"), the report processing should stop there only and it should not display the blank pages of the rest of the PDF template.
Thanks in advance.

Hi,
Thanx for the solution.
I have another query linked to this issue. My requirement is that after displaying the error message (say for example "Please enter Customer name"), the report processing should stop there only and it should not display the blank pages of the rest of the PDF template.
Thanx in advance.

Exception Handling in bounded taskflows - expected behaviour

Hi,
I'm currently reviewing exception handling in bounded task flows and some things does not seems to be very clear for me.
(q1) Does it make sense that a bounded task flow calls a method (via a method activity) defined on the page definition of another page (outside of the BTF) by using a #{data.xxxmyPageDef.myMethodName.execute} EL expression?
(q2) Is is correct to expect the application to execute the method marked as ExceptionHandler in the taskflow, whenever an exception occurs?
(q3) I created 5 different scenarios where I call a service method which throws an exception, from within a page fragment of the BTF.
(q3 – sc1) Call a service method through the binding layer of the current page (by using #{bindings.xxx.execute})
Result: A dialog containing the exception message appears.
This is what I expected. Althought, the exception handler method does not seems to be invoked.(q3 – sc2) Call a service method through a task flow method activity using #{bindings.xxx.execute}
Result: A dialog containing the exception message appears.
This is what I expected. Althought, the exception handler method does not seems to be invoked.(q3 – sc3) Call a service method through a task flow method activity using #{data.myPageFragementPagedef.xxx.execute} (accessing the pageDef of the page fragment)
Result: Nothing happens.
This is not what I expected. Although, the exception handler method does nog seems to be invoked, I expect the ADF Error Handler to create a FacesMessage.(q3 – sc4) Call a service method through a task flow method activity using #{data.myPageContainingThePageFragmentPageDef.xxx.execute} (accessing the page containing the BTF region)
Result: Nothing happens.
This is not what I expected. Although, the exception handler method does nog seems to be invoked, I expect the ADF Error Handler to create a FacesMessage. (q3 – sc5) Call a service method through a task flow method activity using #{data.aPageOutsideTheBTFPageDef.xxx.execute} (accessing a page outside the BTW)
Result: Nothing happens.
This is not what I expected. Although, the exception handler method does nog seems to be invoked, I expect the ADF Error Handler to create a FacesMessage. (q4) How can it be possible that – without an exception handler – exceptions occur when calling method activities, without the exceptions being translated to FacesMessages?
Thanks in advance,
Koen Verhulst
JDeveloper 11.1.1.4

Koen,
+(q1) Does it make sense that a bounded task flow calls a method (via a method activity) defined on the page definition of another page (outside of the BTF) by using a #{data.xxxmyPageDef.myMethodName.execute} EL expression?+
No. Exceptions should be handled locally.
+(q2) Is is correct to expect the application to execute the method marked as ExceptionHandler in the taskflow, whenever an exception occurs?+
Only for exceptions that are before Render Response. The Render Response Phase is not handled in ADFc. So exceptions that occur in managed beans may fall through
+(q3) I created 5 different scenarios where I call a service method which throws an exception, from within a page fragment of the BTF.+
+(q3 – sc1) Call a service method through the binding layer of the current page (by using #{bindings.xxx.execute}) Result: A dialog containing the exception message appears.+
This is what I expected. Althought, the exception handler method does not seems to be invoked.
The binding layer has an error handler you can override in the DataBinings.cpx file
+(q3 – sc2) Call a service method through a task flow method activity using #{bindings.xxx.execute}+
Result: A dialog containing the exception message appears.
This is what I expected. Althought, the exception handler method does not seems to be invoked.
Again, you use the binding layer to invoke the service
+(q3 – sc3) Call a service method through a task flow method activity using #{data.myPageFragementPagedef.xxx.execute} (accessing the pageDef of the page fragment)+
Result: Nothing happens.
This is not what I expected. Although, the exception handler method does nog seems to be invoked, I expect the ADF Error Handler to create a FacesMessage.
Never use such a call. Its bad practice as there is no guarantee the container you reference is active. Always have the method call activity have its own binding defined when accessing a method call activity. I know there are lots of example floating aroundthat you #{data ...} and many are from 10.1.3. This should be avoided alltogether though
+(q3 – sc4) Call a service method through a task flow method activity using #{data.myPageContainingThePageFragmentPageDef.xxx.execute} (accessing the page containing the BTF region)+
Result: Nothing happens.
This is not what I expected. Although, the exception handler method does not seems to be invoked, I expect the ADF Error Handler to create a FacesMessage.
Again, this is not a proper use of the ADF framework.
+(q3 – sc5) Call a service method through a task flow method activity using #{data.aPageOutsideTheBTFPageDef.xxx.execute} (accessing a page outside the BTW)+
Result: Nothing happens. This is not what I expected. Although, the exception handler method does nog seems to be invoked, I expect the ADF Error Handler to create a FacesMessage.
accessing a page outside the BTW (!!!) This should ring a worst practices alarm on your laptop (obviously doesn't do it either)
+(q4) How can it be possible that – without an exception handler – exceptions occur when calling method activities, without the exceptions being translated to FacesMessages?+
Exceptions are not handled in a single place but stacked. The business service raises an exception and passes it to the binding layer if not handled. The binding layer handles the exception and if it can't passes it to ADFc. ADFc can handle this exception if it is not during Render Response.
Bottom line: There is no single point of exception handling. So as a recommendation for best practices
- Catch and handle exceptions as close as possible to their origins
- If things can go wrong, thy will - use try/catch blocks in managed beans
- Use an exception handling activity in all bounded task flows. In the case of task flow call activities being used exceptions can bubble up to the caller. However, this would take users out of their current application context
- Exceptions not handled in ADFc can be intercepted by overriding the application task flow exception handler (used by the exception handler activities). This would give you a chance e.g. to handle issues during Render Response
- Never fight the framework, never bend the framework: Don't use out of scope access to page definitions and resources. Exception handling is not a replacement for bad code practices (sorry for saying this, its not meant to be rude) :-)
Though I don't have a qualified numbers of bugs open for exception handling in ADF between 11.1.1.4 and now (and some that are open), but there are issues reported in this area. If there is something that really feels wrong, please go ahead and file a bug and provide a test case for development to have a look. The Render Response issue, for example is something we are aware of and that is in discussion (afaik knows, there is a change in exception handling in JSF 2 that may have an impact to what we can do in ADFc).
thanks
Frank

Exception Handling in OWB Urgent!!!

Hi,
I want to do error handling in OWB Mapping, how to achivw the same as there is no exception handling OPERATOR provided by OWB. Please let me know its URGET...
Not: OWB version is 10g R1.

Hi,
Jeane has answered your query. Such vague questions dont have any specific answer. Identify your rules that should raise an exception. On satisfying such conditions, route this record to the error table instead of the target table. your exception is raised and it also has been handled as you have managed to load into a error table upon which you can report.
Regards
-AP

Exception Handling in ADF

Jdeveloper version 11.1.1.5.0
Use Case :
My application has :- 1 Jspx page ( testPage.jspx ) , 1 taskflow ( testExceptionFlow.xml ) , 1 pageFragment ( testOperation.jsff ).
I have employee table dragged as table on testOperation.jsff with 4 buttons :
1. Delete - Executes the VO's Delete action.
2. Commit - AM's commit operation ( through datacontrol )
3. CustomDeleteAndCommit - One method in VOImpl which deletes the currentRow and calls this.getDBTransaction().commit() method.
4. CustomCommitThroughBean - Action listener in beans calls the commit through operation binding.
I have secured my application and create two users in jazn.xml User1 and User2. Now both users are logged in to the application using different browser.
Both users can see employee with empId 100.
User1 selects a employee with empId 100 and clicks Delete button. Further clicks Commit button.
User2 selects the same employee with empId 100 and clicks Delete button. Further he can choose to commit through different options :
a) Commit
b) CustomCommitThroughBean
OR
CustomDeleteAndCommit
Obviously there will be jboException stating that row is already delete. When I am calling it through CustomCommitThroughBean operationBinding.getErrors() has errors, so I don't see error on UI.
I see a couple of posts about different ways of handling Exception :
[Using Exception Handler in an ADF Task Flow | https://blogs.oracle.com/ADFProgrammers/entry/using_exception_handler_in_an]
[Extending the ADF Controller exception handler | https://blogs.oracle.com/jdevotnharvest/entry/extending_the_adf_controller_exception_handler]
[Task Flow Exception Handler | http://adfpractice-fedor.blogspot.com/2011/12/task-flow-exception-handler-you-must.html]
[Exception Handling in adf (Part 1) | http://adfwithejb.blogspot.com/2012/05/exception-handling-in-adf-part-1.html ]
Which method of exception handling is applicable should be chosen ?
I just want to notify user about exception through some custom message and table should get refreshed for further operation.
My observations :
I get an error dialog in case :
Commit & CustomDeleteAndCommit
whereas no default error in case : CustomCommitThroughBean
I have uploaded my application [here | http://dl.dropbox.com/u/70986236/BlogApplication/OperationBindingExecuteErrorApp.zip ] . Want to implement exception handling in this application.
Thanks,
Rajdeep
Edited by: Rajdeep on Jul 26, 2012 9:45 PM

When you invoke an operation programmatically through an ADF OperationBinding, the eventual exception is not thrown to you but it is reported to the BindingContainer and the BindingContainer automatically adds a FacesMessage of ERROR severity to the FacesContext. If you have an <af:messages> tag in your ADF Faces page, this error message should be displayed automatically.
Dimitar

Exception Handling in webdynpro abap

Hi
I have a function call which raises an exception. How do i handle it?

hi,
In WD4A, Exception handling in FM is same as We do in R/3. You can check sy-subrc after calling the function module.
Also you can raise error message by using web dynpro code wizard(control + F7 ) button:
Select Generate message radio button. You will find number of methods in F4. You can use them as per your requirement
Example :
Suppose you call a FM like this in WD ABAP :
CALL FUNCTION 'F4UT_RESULTS_MAP'
 TABLES
 shlp_tab = t_shlp_tab
 record_tab = t_record
 source_tab = t_HCP
 CHANGING
 shlp = p_shlp_descr
 callcontrol = icallcontrol
 EXCEPTIONS
 illegal_structure = 1
 OTHERS = 2.
Now after this FM, check the sy-subrc value Like this:
if sy-subrc = 1.
<Report message for exception 1>.
elseif sy-subrc = 2.
<Report message for exception 2>
endif.
Edited by: Saurav Mago on Oct 16, 2009 10:22 AM

Exception handling in Custom Login procedure

Hi,
I have a custom login procedure. Now instead of handling the possible exceptions in a custom way too, I want to use the syntax of the exception handling API (probably the one in the PDK) the default login procedure uses. Can someone point me to the values the default login procedure uses?
Thanks, Tony

Tony,
The default login page (the source of which is now unwrapped in 3.0.0), uses the following snippet of code to report the errors:
if p_error then
wwerr_api_error_ui.show_inline_html;
end if;The errors are stacked when the ls_login procedure is executed, and the next time the login page is called up, it just displays the stacked errors.

Exception handling in File to IDoc Scenario

Hi,
I have successfully configured File to IDoc Scenario. Now I want to include some exception handling which should be capable of create a mail to recipient when a mapping error occurs.
Can anybody help me out?
Regards,
Suraj Kumar

Hi Suraj,
A few points while creating ALERTS.
TESTING YOUR ALERT CONFIGURATIOn
go to se37 --> and execute the report RSALERTTEST. GIve your ALERT CATEGORY in this report. If your ALERTS are configured properly, then your Alert would be triggered and you can see the entry in ALERT INBBOX.
ALERT RULE
Make sure that in your Alert Rule, the option Suppress Multiple Alerts of this rule has not been seelcted.
Finally, if you are on SP14 and above check this note 913858 for alerts.
If you are below Sp14, then this blog can help you set the background processes needed.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
No BPMis needed to trigger alerts in either case.
Do get back for any clarifications,
Regards,
Bhavesh

GP Exception handling doesn't work

I had implemented the GP Exception handling scenario described in [Configuring Exception Handling|http://help.sap.com/saphelp_nw2004s/helpdata/en/44/10bd4029450d1be10000000a114a6b/frameset.htm].
But when I start the process and input a wrong user id, the exception handling action doesn't start and the process keep in running status. When I check the Background Action Processor Queue, the queue entry of action "Retrieve User Details" retry executing continously.
And when I check the background callable object, it report that "Obsolete process exception: E_NO_USER_FOUND " in section Process Exceptions Check .
Is it a system bug or Is something wrong in system configuration?
BTW: The environment is NW7.0 SP13 Java Stack

Reposting

Exception handling in report

Similar Messages

Maybe you are looking for