EXCEPTION in REUSE_ALV_GRID_DISPLAY
Hi All,
This is my first post, and I would greatly appreciate any help.
My question is, exactly what kind of error does the exception in REUSE_ALV_GRID_DISPLAY pick up on? what is the purpose of checking the subrc in REUSE_ALV_GRID_DISPLAY.
I am currently testing a program that uses the function module REUSE_ALV_GRID_DISPLAY.
The program checks the subrc after calling REUSE_ALV_GRID_DISPLAY, and when subrc <> 0 an error message XXX should be displayed in the selection screen.
However when i try to test the above in debugg mode, the ALV grid is displayed (since there are no errors in the FORMS in REUSE_ALV_GRID_DISPLAY) before the subrc is checked.
After the ALV grid is displayed i go back and enter subrc = 1. Therefore, I dont know if the subrc is checked for REUSE_ALV_GRID_DISPLAY or not....
Again, I would be greateful for any information.
Thank you.
Hi Gaurav
Thank you very much for your quick response and the link.
As stated the in the link, there is an exception PROGRAM_ERROR in REUSE_ALV_GRID_DISPLAY but I could not find where PROGRAM_ERROR is raised in the function module.
In the link provided it states that "If the exception is not handled by the calling program" - does this mean that if there is an exception in any of the FORMS or FMs within REUSE_ALV_GRID_DISPLAY, it will be handled as PROGRAM_ERROR??
Exceptions
PROGRAM_ERROR
Meaning
Type of exception generation
If the exception is not handled by the calling program, the following applies:
(X)An error message is sent.
( )A termination message is sent.
( )A runtime error is triggered.
Similar Messages
-
Exception CNTL_ERROR raised when using REUSE_ALV_GRID_DISPLAY
Hi,
I would like to ask your help concerning the following issue. I have a program called ZBAL_ZSTOCK2 which uses the following FM :
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_interface_check = 'X'
i_buffer_active = space
i_callback_program = g_program
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
it_sort = gt_sort[]
i_save = 'A'
is_variant = gs_variant
it_events = gt_events[]
is_print = gs_print
IMPORTING
e_exit_caused_by_caller = g_exit_caused_by_caller
es_exit_caused_by_user = gs_exit_caused_by_user
TABLES
t_outtab = it_alv[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
It works fine when I run it in foreground.
This program is called from another program, using the statement:
SUBMIT zbal_zstock2
USING SELECTION-SET varianta
WITH SELECTION-TABLE rspar
EXPORTING LIST TO MEMORY AND RETURN.
In this last case, the program ZBAL_ZSTOC2 short dumps during of execution of FM - 'REUSE_ALV_GRID_DISPLAY', method SET_VISIBLE, with following explanation:
Error analysis
A RAISE statement in the program "CL_GUI_CONTROL================CP" raised the
exception
condition "CNTL_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
The line where the error is raised into method SET_VISIBLE is:
16 * check handle
17 IF ME->H_CONTROL IS INITIAL.
>>>> RAISE CNTL_ERROR.
19 ENDIF.
Do you have any idea how to avoid this short dump?
I appreciate any suggestion.
Thank you in advance,
MYou cannot use ALV GRID in background. You need to go for ALV LIST Function Module.
PLease search with ALV GRID BACKGROUND in the search field of SCN. You will get lot many posts related to this and solutions are given.
regards,
Padma -
How to color a specific cell in ALV (not REUSE_ALV_GRID_DISPLAY)
Hi
I want to change color font or background to a specify position in ALV grid
It is possible but by creating ALV container (not FM for example REUSE_ALV_GRID_DISPLAY)?Hi,
REPORT ZALV_LIST1.
TABLES:
SPFLI.
TYPE-POOLS:
SLIS.
PARAMETERS:
P_COL TYPE I ,
P_ROW TYPE I,
P_COLOR(4) TYPE C .
DATA:
T_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FS_FIELDCAT LIKE LINE OF T_FIELDCAT,
FS_LAYOUT TYPE SLIS_LAYOUT_ALV ,
W_COLOR(4) ,
W_ROW TYPE I,
W_FIELDNAME(20),
W_PROG TYPE SY-REPID.
DATA:
BEGIN OF T_SPFLI OCCURS 0,
COLOR(4),
CHECKBOX ,
CELL TYPE SLIS_T_SPECIALCOL_ALV,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
CITYFROM TYPE SPFLI-CITYFROM,
CITYTO TYPE SPFLI-CITYTO,
DISTANCE TYPE SPFLI-DISTANCE,
END OF T_SPFLI.
DATA:
FS_CELL LIKE LINE OF T_SPFLI-CELL.
SELECT *
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE T_SPFLI.
W_COLOR = P_COLOR.
T_SPFLI-COLOR = P_COLOR.
IF P_COL IS INITIAL AND P_ROW GT 0.
MODIFY T_SPFLI INDEX P_ROW TRANSPORTING COLOR.
ENDIF.
FS_FIELDCAT-FIELDNAME = 'CARRID'.
FS_FIELDCAT-REF_TABNAME = 'SPFLI'.
FS_FIELDCAT-COL_POS = 1.
FS_FIELDCAT-KEY = 'X'.
FS_FIELDCAT-HOTSPOT = 'X'.
APPEND FS_FIELDCAT TO T_FIELDCAT.
CLEAR FS_FIELDCAT .
FS_FIELDCAT-FIELDNAME = 'CONNID'.
FS_FIELDCAT-REF_TABNAME = 'SPFLI'.
FS_FIELDCAT-COL_POS = 2.
FS_FIELDCAT-KEY = 'X'.
FS_FIELDCAT-HOTSPOT = 'X'.
APPEND FS_FIELDCAT TO T_FIELDCAT.
CLEAR FS_FIELDCAT .
FS_FIELDCAT-FIELDNAME = 'DISTANCE'.
FS_FIELDCAT-REF_TABNAME = 'SPFLI'.
FS_FIELDCAT-COL_POS = 3.
FS_FIELDCAT-KEY = ' '.
FS_FIELDCAT-EDIT = 'X'.
APPEND FS_FIELDCAT TO T_FIELDCAT.
CLEAR FS_FIELDCAT.
FS_FIELDCAT-FIELDNAME = 'CITYFROM'.
FS_FIELDCAT-REF_TABNAME = 'SPFLI'.
FS_FIELDCAT-COL_POS = 4.
FS_FIELDCAT-KEY = ' '.
APPEND FS_FIELDCAT TO T_FIELDCAT.
LOOP AT T_FIELDCAT INTO FS_FIELDCAT.
IF FS_FIELDCAT-COL_POS EQ P_COL.
FS_FIELDCAT-EMPHASIZE = P_COLOR.
W_FIELDNAME = FS_FIELDCAT-FIELDNAME.
IF P_ROW IS INITIAL AND P_COL GT 0.
MODIFY T_FIELDCAT FROM FS_FIELDCAT TRANSPORTING EMPHASIZE.
ENDIF.
ENDIF.
ENDLOOP.
FS_CELL-FIELDNAME = W_FIELDNAME .
FS_CELL-COLOR-COL = 6.
FS_CELL-NOKEYCOL = 'X'.
APPEND FS_CELL TO T_SPFLI-CELL.
IF P_ROW IS NOT INITIAL AND P_COL IS NOT INITIAL.
MODIFY T_SPFLI INDEX P_ROW TRANSPORTING CELL.
ENDIF.
FS_LAYOUT-INFO_FIELDNAME = 'COLOR'.
FS_LAYOUT-BOX_FIELDNAME = 'CHECKBOX'.
FS_LAYOUT-COLTAB_FIELDNAME = 'CELL'.
FS_LAYOUT-F2CODE = '&ETA'.
W_PROG = SY-REPID.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = W_PROG
IS_LAYOUT = FS_LAYOUT
IT_FIELDCAT = T_FIELDCAT
TABLES
T_OUTTAB = T_SPFLI
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2 -
ALV Grid Excel in Place using REUSE_ALV_GRID_DISPLAY
I have a ALV grid displayed in a report and i have a bunch of layouts created by various users and the layouts works fine when selected. But when I use 'Excel' (excel-in-place) button to export the grid into an excel sheet, the order of the columns are all jumbled up and not in sync with the ALV grid layout on the screen. However, when I use export to local file>excel option, the order of columns are in sync with the layout. Can any one explain why this is happening and how I can fix it ? Is there any OSS note or something that I need to apply ?
PS : I am using REUSE_ALV_GRID_DISPLAY to display the report and I am building the fieldcatalog manually
Eg :
CLEAR r_fieldcatalog.
MOVE 'TB_OUTPUT' TO r_fieldcatalog-tabname.
MOVE 'BUKRS' TO r_fieldcatalog-fieldname.
MOVE 'VBAK' TO r_fieldcatalog-ref_tabname.
MOVE 'BUKRS_VF' TO r_fieldcatalog-ref_fieldname.
MOVE text-f01 TO r_fieldcatalog-seltext_s.
MOVE text-f01 TO r_fieldcatalog-seltext_m.
MOVE text-f01 TO r_fieldcatalog-seltext_l.
add '1' to lv_col_pos .
move lv_col_pos to r_fieldcatalog-col_pos .
APPEND r_fieldcatalog TO tc_fieldcatalog.
CLEAR r_fieldcatalog.
MOVE 'TB_OUTPUT' TO r_fieldcatalog-tabname.
MOVE 'VKORG' TO r_fieldcatalog-fieldname.
MOVE 'VBAK' TO r_fieldcatalog-ref_tabname.
MOVE 'VKORG' TO r_fieldcatalog-ref_fieldname.
MOVE text-f02 TO r_fieldcatalog-seltext_s.
MOVE text-f02 TO r_fieldcatalog-seltext_m.
MOVE text-f02 TO r_fieldcatalog-seltext_l.
add '1' to lv_col_pos .
move lv_col_pos to r_fieldcatalog-col_pos .
APPEND r_fieldcatalog TO tc_fieldcatalog.
Thanks in advance,
ShareenCALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_pf_status_set = 'ALV_PF_STATUS'
i_callback_program = sy-repid
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
i_default = ' '
i_save = g_save
TABLES
t_outtab = it_tab
EXCEPTIONS
program_error = 1
OTHERS = 2.
and beneath this just put a form.as its shown.
FORM alv_pf_status USING l_alv_excl TYPE STANDARD TABLE.
SET PF-STATUS 'STANDARD_FULLSCREEN' "excluding lt_extab
OF PROGRAM 'SAPLSETB'.
ENDFORM. "alv_pf_status -
Total in REUSE_ALV_GRID_DISPLAY
Hi,
If we CHECK total option in REUSE_ALV_GRID_DISPLAY we get a total of numeric value with yellow color at the bottom.
Requirement:
Let say I have 3 line item records in the display, with 20 fields and one amount field. So I get the total of the amount field. Apart from that I want the Total number of LINE ITEMS to get displayed on that line. Is that possible . How?
Thanks in Advance.Just call Reuse_alv_list_display instead of gris. Rest of functionality is same.
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic requirement for this demo is to display a number of *
*& fields from the EKKO table. *
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
* Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
* I.e. Field type may be required in-order for
* the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
* fieldcatalog-do_sum = 'X'.
* fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X' "Display column total
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
* Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
* gd_layout-totals_only = 'X'.
* gd_layout-f2code = 'DISP'. "Sets fcode for when double
* "click(press f2)
* gd_layout-zebra = 'X'.
* gd_layout-group_change_edit = 'X'.
* gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
* Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
* i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
* i_callback_user_command = 'USER_COMMAND'
* i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
* it_special_groups = gd_tabgroup
* IT_EVENTS = GT_XEVENTS
i_save = 'X'
* is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
* Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL -
Checkbox field in ALV for REUSE_ALV_GRID_DISPLAY
how to handle Checkbox field in ALV for REUSE_ALV_GRID_DISPLAY????
For example Alv has displayed 400 entries if user checks 4 entries and wants to donwload only those 4 entries from ALV using Copy to local file option then how should it be done. please provide some help...REPORT YHRMR_LTC_TAXABLE NO STANDARD PAGE HEADING LINE-SIZE 120.
TYPE-POOLS: SLIS.
Start of Data Declaration *
DATA: G_PLVAR TYPE PLVAR.
DATA: P_MONTH TYPE TFMATAGE.
DATA: TOTAL_NO TYPE I.
DATA: TOTAL_NO_SUM TYPE I.
DATA: COUNT_15 TYPE I.
DATA: COUNT_15_SUM TYPE I.
DATA: COUNT_LTC TYPE I.
DATA: COUNT_LTC_SUM TYPE I.
DATA: COUNT_ERROR_IT15 TYPE I.
DATA: COUNT_ERROR_IT15_SUM TYPE I.
DATA: COUNT_ERROR_LTC TYPE I.
DATA: COUNT_ERROR_LTC_SUM TYPE I.
DATA: COUNT_ENTRY_IT15 TYPE I.
DATA: COUNT_ENTRY_IT15_SUM TYPE I.
--LOCAL TABLE TYPE--
DATA: T_DATA_LTC LIKE YHRMT_LTC OCCURS 0 WITH HEADER LINE.
DATA: T_DATA_LTC_NEW LIKE YHRMT_LTC OCCURS 0 WITH HEADER LINE.
DATA: T_PA0015 LIKE PA0015 OCCURS 0 WITH HEADER LINE.
DATA: T_P0015 LIKE PA0015 OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF T_FINAL OCCURS 0,
CHECK_BOX(1),
MANDT TYPE MANDT,
PERNR TYPE PERSNO,
ABKRS TYPE ABKRS,
PERSK TYPE PERSK,
WAGETYPE TYPE LGART,
LTCSTART TYPE YAJAHR,
LTCEND TYPE YYAJAHR,
FLAG TYPE YCHAR1,
SEQNR TYPE SEQNR,
LEVSTART TYPE URBEG,
LEVEND TYPE BDATU_052R,
PAYDATE TYPE YBEGDA,
AMOUNTPAY TYPE AMUNT,
TAXYR TYPE PHK_TAXYR,
DOCUNO TYPE YCHAR20,
DOCUDATE TYPE YENDDA,
VOUCHNO TYPE YCHAR20,
APDATE TYPE BPS_APPDA,
CANCEL_MOD TYPE YCANCELMOD,
LTC_IND TYPE ATZH1,
APPL_TAG TYPE YAPPTAG,
CANCEL_DATE TYPE AEDTM,
CANCEL_USER TYPE AENAM,
LASTCHANGE TYPE AEDTM,
USERNAME TYPE AENAM,
END OF T_FINAL.
DATA: BEGIN OF T_PA0001 OCCURS 0,
PERNR LIKE PA0001-PERNR,
ABKRS LIKE PA0001-ABKRS,
END OF T_PA0001.
--Message Part Declaration--
DATA: BEGIN OF T_SUCCESS OCCURS 0,
PERNR TYPE PERSNO,
MESSAGE(50) TYPE C,
END OF T_SUCCESS.
DATA: BEGIN OF T_ERROR OCCURS 0,
PERNR TYPE PERSNO,
MESSAGE(50) TYPE C,
END OF T_ERROR.
--TABLE TYPE OF SLIS TYPE-GROUP--
DATA: G_FLD TYPE SLIS_T_FIELDCAT_ALV,
G_EV TYPE SLIS_T_EVENT,
G_SORT TYPE SLIS_T_SORTINFO_ALV,
G_LST TYPE SLIS_T_LISTHEADER.
DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
GD_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_EVENTS TYPE SLIS_T_EVENT,
GD_REPID LIKE SY-REPID.
--STRUCTURE TYPE OF SLIS TYPE-GROUP--
DATA: L_EV TYPE SLIS_ALV_EVENT.
CONSTANTS : C_PF TYPE SLIS_FORMNAME VALUE 'PF_STATUS_SET',
C_UCOM TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
*---- Start Change by Bibek/Shankar Dated : 12-03-2008 via cmr no : J/08/03/062/1.
DATA: L_ENDDATE LIKE SY-DATUM.
*---- End Change by Bibek/Shankar Dated : 12-03-2008 via cmr no : J/08/03/062/1.
End of Data Declaration *
Start of Selection screen Parameters *
SELECTION-SCREEN BEGIN OF BLOCK A WITH FRAME TITLE TEXT-002.
*START CHANGE BY SHAYARI ON 18.02.2008, CMR No.:- J/08/02/323
PARAMETERS:P_ABKRS LIKE PA0001-ABKRS OBLIGATORY.
*END CHANGE BY SHAYARI ON 18.02.2008, CMR No.:- J/08/02/323
*START CHANGE BY BIBEk Dt : 06.03.2008, CMR No.:- J/08/03/062/1
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
SELECTION-SCREEN COMMENT 1(78) TEXT-006 FOR FIELD P_LES.
PARAMETER P_LES RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF LINE.
*END CHANGE BY BIBEk Dt : 06.03.2008, CMR No.:- J/08/03/062/1
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
SELECTION-SCREEN COMMENT 1(78) TEXT-003 FOR FIELD P_ONE.
PARAMETER P_ONE RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
SELECTION-SCREEN COMMENT 1(78) TEXT-004 FOR FIELD P_TWO.
PARAMETER P_TWO RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 1.
SELECTION-SCREEN COMMENT 1(78) TEXT-005 FOR FIELD P_MORE.
PARAMETER P_MORE RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK A.
End of Selection screen Parameters *
*Get Plan Version
CALL FUNCTION 'RH_GET_PLVAR'
IMPORTING
PLVAR = G_PLVAR.
PERFORM CLEAR.
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
EXPORTING
IV_DATE = SY-DATUM
IMPORTING
EV_MONTH_BEGIN_DATE =
EV_MONTH_END_DATE = L_ENDDATE.
SELECT *
FROM YHRMT_LTC
INTO TABLE T_DATA_LTC
WHERE FLAG = '1'
AND WAGETYPE = '1640'
AND LEVEND LE L_ENDDATE
AND PAYDATE GE '20080101'.
If SY-SUBRC <> 0.
MESSAGE I398(00) with 'No Records to display '.
ENDIF.
DELETE T_DATA_LTC WHERE LEVEND = '00000000'.
*START CHANGE BY BIBEk Dt : 06.03.2008, CMR No.:- J/08/03/062/1
*For Less Than One Month from Leave End Date
IF P_LES = 'X'.
LOOP AT T_DATA_LTC.
CLEAR P_MONTH.
CALL FUNCTION 'HR_AUPBS_MONTH_DAY'
EXPORTING
BEG_DA = T_DATA_LTC-LEVEND
END_DA = SY-DATUM
IMPORTING
NO_MONTH = P_MONTH.
IF P_MONTH LT '1'.
T_FINAL-MANDT = T_DATA_LTC-MANDT.
T_FINAL-PERNR = T_DATA_LTC-PERSONNELNO.
T_FINAL-PERSK = T_DATA_LTC-PERSK.
T_FINAL-WAGETYPE = T_DATA_LTC-WAGETYPE.
T_FINAL-LTCSTART = T_DATA_LTC-LTCSTART.
T_FINAL-LTCEND = T_DATA_LTC-LTCEND.
T_FINAL-FLAG = T_DATA_LTC-FLAG.
T_FINAL-SEQNR = T_DATA_LTC-SEQNR.
T_FINAL-LEVSTART = T_DATA_LTC-LEVSTART.
T_FINAL-LEVEND = T_DATA_LTC-LEVEND.
T_FINAL-PAYDATE = T_DATA_LTC-PAYDATE.
T_FINAL-AMOUNTPAY = T_DATA_LTC-AMOUNTPAY.
T_FINAL-TAXYR = T_DATA_LTC-TAXYR.
T_FINAL-DOCUNO = T_DATA_LTC-DOCUNO.
T_FINAL-DOCUDATE = T_DATA_LTC-DOCUDATE.
T_FINAL-VOUCHNO = T_DATA_LTC-VOUCHNO.
T_FINAL-APDATE = T_DATA_LTC-APDATE.
T_FINAL-CANCEL_MOD = T_DATA_LTC-CANCEL_MOD.
T_FINAL-LTC_IND = T_DATA_LTC-LTC_IND.
T_FINAL-APPL_TAG = T_DATA_LTC-APPL_TAG.
T_FINAL-CANCEL_DATE = T_DATA_LTC-CANCEL_DATE.
T_FINAL-CANCEL_USER = T_DATA_LTC-CANCEL_USER.
T_FINAL-LASTCHANGE = T_DATA_LTC-LASTCHANGE.
T_FINAL-USERNAME = T_DATA_LTC-USERNAME.
APPEND T_FINAL.
CLEAR T_FINAL.
ENDIF.
ENDLOOP.
*For One Month from Leave End Date
ELSEIF P_ONE = 'X'.
LOOP AT T_DATA_LTC.
CLEAR P_MONTH.
CALL FUNCTION 'HR_AUPBS_MONTH_DAY'
EXPORTING
BEG_DA = T_DATA_LTC-LEVEND
END_DA = SY-DATUM
IMPORTING
NO_MONTH = P_MONTH.
IF P_MONTH EQ '1' AND P_MONTH LT '2'.
T_FINAL-MANDT = T_DATA_LTC-MANDT.
T_FINAL-PERNR = T_DATA_LTC-PERSONNELNO.
T_FINAL-PERSK = T_DATA_LTC-PERSK.
T_FINAL-WAGETYPE = T_DATA_LTC-WAGETYPE.
T_FINAL-LTCSTART = T_DATA_LTC-LTCSTART.
T_FINAL-LTCEND = T_DATA_LTC-LTCEND.
T_FINAL-FLAG = T_DATA_LTC-FLAG.
T_FINAL-SEQNR = T_DATA_LTC-SEQNR.
T_FINAL-LEVSTART = T_DATA_LTC-LEVSTART.
T_FINAL-LEVEND = T_DATA_LTC-LEVEND.
T_FINAL-PAYDATE = T_DATA_LTC-PAYDATE.
T_FINAL-AMOUNTPAY = T_DATA_LTC-AMOUNTPAY.
T_FINAL-TAXYR = T_DATA_LTC-TAXYR.
T_FINAL-DOCUNO = T_DATA_LTC-DOCUNO.
T_FINAL-DOCUDATE = T_DATA_LTC-DOCUDATE.
T_FINAL-VOUCHNO = T_DATA_LTC-VOUCHNO.
T_FINAL-APDATE = T_DATA_LTC-APDATE.
T_FINAL-CANCEL_MOD = T_DATA_LTC-CANCEL_MOD.
T_FINAL-LTC_IND = T_DATA_LTC-LTC_IND.
T_FINAL-APPL_TAG = T_DATA_LTC-APPL_TAG.
T_FINAL-CANCEL_DATE = T_DATA_LTC-CANCEL_DATE.
T_FINAL-CANCEL_USER = T_DATA_LTC-CANCEL_USER.
T_FINAL-LASTCHANGE = T_DATA_LTC-LASTCHANGE.
T_FINAL-USERNAME = T_DATA_LTC-USERNAME.
APPEND T_FINAL.
CLEAR T_FINAL.
ENDIF.
ENDLOOP.
*For Two Month from Leave End Date
ELSEIF P_TWO = 'X'.
LOOP AT T_DATA_LTC.
CLEAR P_MONTH.
CALL FUNCTION 'HR_AUPBS_MONTH_DAY'
EXPORTING
BEG_DA = T_DATA_LTC-LEVEND
END_DA = SY-DATUM
IMPORTING
NO_MONTH = P_MONTH.
IF P_MONTH EQ '2' AND P_MONTH LT '3'.
T_FINAL-MANDT = T_DATA_LTC-MANDT.
T_FINAL-PERNR = T_DATA_LTC-PERSONNELNO.
T_FINAL-PERSK = T_DATA_LTC-PERSK.
T_FINAL-WAGETYPE = T_DATA_LTC-WAGETYPE.
T_FINAL-LTCSTART = T_DATA_LTC-LTCSTART.
T_FINAL-LTCEND = T_DATA_LTC-LTCEND.
T_FINAL-FLAG = T_DATA_LTC-FLAG.
T_FINAL-SEQNR = T_DATA_LTC-SEQNR.
T_FINAL-LEVSTART = T_DATA_LTC-LEVSTART.
T_FINAL-LEVEND = T_DATA_LTC-LEVEND.
T_FINAL-PAYDATE = T_DATA_LTC-PAYDATE.
T_FINAL-AMOUNTPAY = T_DATA_LTC-AMOUNTPAY.
T_FINAL-TAXYR = T_DATA_LTC-TAXYR.
T_FINAL-DOCUNO = T_DATA_LTC-DOCUNO.
T_FINAL-DOCUDATE = T_DATA_LTC-DOCUDATE.
T_FINAL-VOUCHNO = T_DATA_LTC-VOUCHNO.
T_FINAL-APDATE = T_DATA_LTC-APDATE.
T_FINAL-CANCEL_MOD = T_DATA_LTC-CANCEL_MOD.
T_FINAL-LTC_IND = T_DATA_LTC-LTC_IND.
T_FINAL-APPL_TAG = T_DATA_LTC-APPL_TAG.
T_FINAL-CANCEL_DATE = T_DATA_LTC-CANCEL_DATE.
T_FINAL-CANCEL_USER = T_DATA_LTC-CANCEL_USER.
T_FINAL-LASTCHANGE = T_DATA_LTC-LASTCHANGE.
T_FINAL-USERNAME = T_DATA_LTC-USERNAME.
APPEND T_FINAL.
CLEAR T_FINAL.
ENDIF.
ENDLOOP.
*For More than Two Month from Leave End Date
ELSEIF P_MORE = 'X'.
LOOP AT T_DATA_LTC.
CLEAR P_MONTH.
CALL FUNCTION 'HR_AUPBS_MONTH_DAY'
EXPORTING
BEG_DA = T_DATA_LTC-LEVEND
END_DA = SY-DATUM
IMPORTING
NO_MONTH = P_MONTH.
IF P_MONTH GT '2' .
T_FINAL-MANDT = T_DATA_LTC-MANDT.
T_FINAL-PERNR = T_DATA_LTC-PERSONNELNO.
T_FINAL-PERSK = T_DATA_LTC-PERSK.
T_FINAL-WAGETYPE = T_DATA_LTC-WAGETYPE.
T_FINAL-LTCSTART = T_DATA_LTC-LTCSTART.
T_FINAL-LTCEND = T_DATA_LTC-LTCEND.
T_FINAL-FLAG = T_DATA_LTC-FLAG.
T_FINAL-SEQNR = T_DATA_LTC-SEQNR.
T_FINAL-LEVSTART = T_DATA_LTC-LEVSTART.
T_FINAL-LEVEND = T_DATA_LTC-LEVEND.
T_FINAL-PAYDATE = T_DATA_LTC-PAYDATE.
T_FINAL-AMOUNTPAY = T_DATA_LTC-AMOUNTPAY.
T_FINAL-TAXYR = T_DATA_LTC-TAXYR.
T_FINAL-DOCUNO = T_DATA_LTC-DOCUNO.
T_FINAL-DOCUDATE = T_DATA_LTC-DOCUDATE.
T_FINAL-VOUCHNO = T_DATA_LTC-VOUCHNO.
T_FINAL-APDATE = T_DATA_LTC-APDATE.
T_FINAL-CANCEL_MOD = T_DATA_LTC-CANCEL_MOD.
T_FINAL-LTC_IND = T_DATA_LTC-LTC_IND.
T_FINAL-APPL_TAG = T_DATA_LTC-APPL_TAG.
T_FINAL-CANCEL_DATE = T_DATA_LTC-CANCEL_DATE.
T_FINAL-CANCEL_USER = T_DATA_LTC-CANCEL_USER.
T_FINAL-LASTCHANGE = T_DATA_LTC-LASTCHANGE.
T_FINAL-USERNAME = T_DATA_LTC-USERNAME.
APPEND T_FINAL.
CLEAR T_FINAL.
ENDIF.
ENDLOOP.
ENDIF.
****Payroll Area Put
SELECT PERNR ABKRS FROM PA0001
INTO CORRESPONDING FIELDS OF TABLE T_PA0001
FOR ALL ENTRIES IN T_FINAL
WHERE PERNR = T_FINAL-PERNR
AND ABKRS = P_ABKRS
AND BEGDA LE SY-DATUM
AND ENDDA GE SY-DATUM.
LOOP AT T_FINAL.
READ TABLE T_PA0001 WITH KEY PERNR = T_FINAL-PERNR.
IF SY-SUBRC = 0.
T_FINAL-ABKRS = T_PA0001-ABKRS.
MODIFY T_FINAL.
CLEAR T_FINAL.
ENDIF.
ENDLOOP.
CLEAR T_FINAL.
DELETE T_FINAL WHERE ABKRS = ''.
*Output Form ALV List
PERFORM ALV.
*& Form ALV
FORM ALV .
PERFORM BUILD_FIELDCATALOG.
PERFORM BUILD_EVENT.
PERFORM DISPLAY_DATA.
ENDFORM. " ALV
*& Form BUILD_FIELDCATALOG
FORM BUILD_FIELDCATALOG .
FIELDCATALOG-TABNAME = 'T_FINAL'.
FIELDCATALOG-FIELDNAME = 'PERNR'.
FIELDCATALOG-SELTEXT_M = 'Personnel number'.
FIELDCATALOG-COL_POS = 1.
FIELDCATALOG-OUTPUTLEN = 17.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-TABNAME = 'T_FINAL'.
FIELDCATALOG-FIELDNAME = 'ABKRS'.
FIELDCATALOG-SELTEXT_M = 'Payroll Area'.
FIELDCATALOG-COL_POS = 2.
FIELDCATALOG-OUTPUTLEN = 17.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-TABNAME = 'T_FINAL'.
FIELDCATALOG-FIELDNAME = 'LTCSTART'.
FIELDCATALOG-SELTEXT_M = 'LTC Start year'.
FIELDCATALOG-COL_POS = 3.
FIELDCATALOG-OUTPUTLEN = 15.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-TABNAME = 'T_FINAL'.
FIELDCATALOG-FIELDNAME = 'LTCEND'.
FIELDCATALOG-SELTEXT_M = 'LTC End year'.
FIELDCATALOG-COL_POS = 4.
FIELDCATALOG-OUTPUTLEN = 15.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-TABNAME = 'T_FINAL'.
FIELDCATALOG-FIELDNAME = 'LEVSTART'.
FIELDCATALOG-SELTEXT_M = 'Start of leave'.
FIELDCATALOG-COL_POS = 5.
FIELDCATALOG-OUTPUTLEN = 15.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-TABNAME = 'T_FINAL'.
FIELDCATALOG-FIELDNAME = 'LEVEND'.
FIELDCATALOG-SELTEXT_M = 'End of leave'.
FIELDCATALOG-COL_POS = 6.
FIELDCATALOG-OUTPUTLEN = 15.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-TABNAME = 'T_FINAL'.
FIELDCATALOG-FIELDNAME = 'AMOUNTPAY'.
FIELDCATALOG-SELTEXT_M = 'Amount'.
FIELDCATALOG-DO_SUM = 'X'.
FIELDCATALOG-COL_POS = 7.
FIELDCATALOG-OUTPUTLEN = 13.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-TABNAME = 'T_FINAL'.
FIELDCATALOG-FIELDNAME = 'PAYDATE'.
FIELDCATALOG-SELTEXT_M = 'Payment Date'.
FIELDCATALOG-COL_POS = 8.
FIELDCATALOG-OUTPUTLEN = 15.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-TABNAME = 'T_FINAL'.
FIELDCATALOG-FIELDNAME = 'APPL_TAG'.
FIELDCATALOG-SELTEXT_M = 'Application Tag '.
FIELDCATALOG-COL_POS = 9.
FIELDCATALOG-OUTPUTLEN = 15.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
*Check Box Field Add
CLEAR GD_LAYOUT.
GD_LAYOUT-BOX_FIELDNAME = 'CHECK_BOX'.
GD_LAYOUT-BOX_TABNAME = 'T_FINAL'.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_EVENT
FORM BUILD_EVENT .
*Event Handler
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = G_EV
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
ELSE.
READ TABLE G_EV INTO L_EV WITH KEY NAME = SLIS_EV_PF_STATUS_SET.
IF SY-SUBRC = 0.
MOVE C_PF TO L_EV-FORM.
MODIFY G_EV FROM L_EV INDEX SY-TABIX TRANSPORTING FORM.
ENDIF.
READ TABLE G_EV INTO L_EV WITH KEY NAME = SLIS_EV_USER_COMMAND.
IF SY-SUBRC = 0.
MOVE C_UCOM TO L_EV-FORM.
MODIFY G_EV FROM L_EV INDEX SY-TABIX TRANSPORTING FORM.
ENDIF.
ENDIF.
ENDFORM. " BUILD_EVENT
*& Form DISPLAY_DATA
FORM DISPLAY_DATA .
GD_REPID = SY-REPID.
CLEAR I_EVENTS. REFRESH I_EVENTS.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = GD_REPID
I_CALLBACK_PF_STATUS_SET = C_PF
I_CALLBACK_USER_COMMAND = C_UCOM
IS_LAYOUT = GD_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
IT_EVENTS = G_EV
TABLES
T_OUTTAB = T_FINAL.
ENDFORM. " DISPLAY_DATA
FORM PF_STATUS_SET *
FORM PF_STATUS_SET USING RX_TAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'LTC'.
ENDFORM. "PF_STATUS_SET
FORM USER_COMMAND *
FORM USER_COMMAND USING R_UCOM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOM.
WHEN 'POST'.
PERFORM POST_IT15_LTC_TABLE.
ENDCASE.
ENDFORM. "USER_COMMAND
*& Form POST_IT15_LTC_TABLE
FORM POST_IT15_LTC_TABLE .
ENDFORM. " POST_IT15_LTC_TABLE
*& Form clear
FORM CLEAR .
CLEAR T_DATA_LTC.
REFRESH T_DATA_LTC.
CLEAR T_DATA_LTC_NEW.
REFRESH T_DATA_LTC_NEW.
CLEAR T_FINAL.
REFRESH T_FINAL.
CLEAR T_PA0015.
REFRESH T_PA0015.
CLEAR T_SUCCESS.
REFRESH T_SUCCESS.
CLEAR T_ERROR.
REFRESH T_ERROR.
CLEAR G_PLVAR.
CLEAR P_MONTH.
CLEAR COUNT_15.
CLEAR COUNT_15_SUM.
CLEAR COUNT_LTC.
CLEAR COUNT_LTC_SUM.
CLEAR TOTAL_NO.
CLEAR TOTAL_NO_SUM.
CLEAR COUNT_ERROR_IT15.
CLEAR COUNT_ERROR_IT15_SUM.
CLEAR COUNT_ERROR_LTC.
CLEAR COUNT_ERROR_LTC_SUM.
CLEAR COUNT_ENTRY_IT15.
CLEAR COUNT_ENTRY_IT15_SUM.
ENDFORM. " clear -
Button in ALV toolbar with REUSE_ALV_GRID_DISPLAY
Hello friends,
I am Displaying ALV using REUSE_ALV_GRID_IDSPLAY. i need to add a button in grid toolbar.
i am doing it by adding a new ZSTATUS in SET PF_STATUS. but the problem is that it is removing the standard buttons.
i want to add button without removing the standard butttons.
Please help.
thanx in advance.
Krishan Kumarhai friends.......
i had tried to add custom button to the reuse_alv_grid_display.please send the coding...
REPORT ZHAJI_SAMPLE.
tables:lfa1.
TYPE-POOLS : slis.
SELECT-OPTIONS: lifnr FOR lfa1-lifnr.
types:begin of fs,
flag type c,
lifnr type lfa1-lifnr,
land1 type lfa1-land1,
name1 type lfa1-name1,
end of fs.
data: itab type table of fs,
wa type fs.
data: fcat type slis_t_fieldcat_alv,
fcat1 type slis_fieldcat_alv.
data: rt_extab type slis_t_extab.
*CONSTANTS : c_check(1) VALUE 'X'.
select lifnr land1 name1 from lfa1 into corresponding FIELDS OF table
itab where lifnr IN
lifnr.
perform sub.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = 'sy-repid'
I_CALLBACK_PF_STATUS_SET = 'PF'
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = 'vendor details'
I_GRID_SETTINGS =
IS_LAYOUT = LAYOUT
IT_FIELDCAT = fcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = I_EVENT
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = itab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
form sub.
fcat1-fieldname = 'FLAG'.
fcat1-tabname = 'TAB'.
*fcat1-COL_POS = 1.
fcat1-checkbox = 'X'.
fcat1-edit = 'X'.
append fcat1 to fcat.
CLEAR FCAT1.
fcat1-fieldname = 'LIFNR'.
fcat1-ref_tabname = 'LFA1'.
fcat1-ref_fieldname = 'LIFNR'.
FCAT1-outputlen = 10.
append fcat1 to fcat.
CLEAR FCAT1.
fcat1-fieldname = 'NAME1'.
fcat1-ref_tabname = 'LFA1'.
fcat1-ref_fieldname = 'NAME1'.
append fcat1 to fcat.
CLEAR FCAT1.
fcat1-fieldname = 'LAND1'.
fcat1-ref_tabname = 'LFA1'.
fcat1-ref_fieldname = 'LAND1'.
append fcat1 to fcat.
CLEAR FCAT1.
endform.
form PF USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZHAJI_P1' .
ENDFORM.
just give the fine coding -
Button in alv grid cell using REUSE_ALV_GRID_DISPLAY
Hi all,
I want to make the contents of 2 columns of my alv grid as push button with values as text on it. I am not using classes or methods but alv grid fm. On clicking the button one dialog box has to pop up which gives edit option for the values in that coloumn, my question is how to introduce button in alv grid cell? if i can use t_fieldcatalog-icon, then please give me the complete steps for that.
Thanks.this may helps u
u need to copy stadard screen elemetn to MARATAB1(at PF -STATUS)
You should copy the 'STANDARD' GUI status from program <b>SAPLSLVC_FULLSCREEN</b>
type this one in SE41 program name is:<b>SAPLSLVC_FULLSCREEN</b>
status : <b>STANDARD_FULLSCREEN</b>
and copy it ...
Type-pool
type-pools slis.
Tables
tables: mara,sscrfields.
Selection screen
select-options: s_matnr for mara-matnr.
PARAMETERS: p_email TYPE somlreci1-receiver.
TYPES: BEGIN OF t_charmara,
matnr(18) TYPE c, " Material Number
ernam(12) TYPE c, " Person Credited
aenam(12) TYPE c, " Person Changed Object
pstat(15) TYPE c, " Maintenance Status
END OF t_charmara.
Data Declarations
data: rt_extab type slis_t_extab, " Table of inactive function
codes
wa_charmara TYPE t_charmara, " work area of mara Table
fs_fieldcat type slis_t_fieldcat_alv,
" Field catalog with field
descriptions
t_fieldcat like line of fs_fieldcat,
" Table of Field catalog
r_ucomm like sy-ucomm, " User Command
rs_selfield TYPE slis_selfield. " cursor position ALV
data: filedlayout type slis_layout_alv,
heading type slis_t_listheader with header line,
t_event type slis_t_event.
data: fs_event like line of t_event.
data: fs_sort type slis_sortinfo_alv,
t_sort type slis_t_sortinfo_alv.
data: w_char(200) type c,
w_matnr type mara-matnr.
fs_sort-fieldname = 'MATNR'.
fs_sort-up = 'X'.
fs_sort-group = '*'.
append fs_sort to t_sort.
clear fS_sort.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
Internal Tables
data: begin of it_mara occurs 0,
matnr like mara-matnr, " Material Number
ernam like mara-ernam, " Person Credited
aenam like mara-aenam, " Person Changed Object
pstat like mara-pstat, " Maintenance Status
end of it_mara.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
*at selection-screen on field event
AT SELECTION-SCREEN on s_matnr.
PERFORM f0100_VALIDATE_MATERIAL_NUMBER.
start-of-selection.
retrive Data from the data base table Mara
perform retrive_data_from_mara.
end-of-selection.
*Field catalog with field descriptions
perform fieldcat.
*perform top_of_page.
PERFORM EVENT_LIST.
*ALV Grid Display
perform alv_display.
Creating one Push button ENTER
perform maratab1 USING RT_EXTAB.
*& Form f0100_VALIDATE_MATERIAL_NUMBER
text
There are no interface parameters to be passed to this subroutine
FORM F0100_VALIDATE_MATERIAL_NUMBER .
select matnr " Material Number
from mara
up to 1 rows
into mara-matnr
where matnr in s_matnr.
endselect.
IF sy-subrc NE 0.
clear sscrfields-ucomm.
MESSAGE e000 WITH 'Enter valid Material number'(003).
ENDIF. " IF sy-subrc NE 0
ENDFORM. " f0100_VALIDATE_MATERIAL_NUMBER
*& Form retrive_data_from_mara
text
*There are no interface parameters to be passed to this subroutine
FORM retrive_data_from_mara .
select matnr " Material Number
ernam " Person Credited
aenam " Person Changed Object
pstat " Maintenance Status
from mara
into table It_mara
where matnr in s_matnr.
IF sy-subrc NE 0.
MESSAGE i001 WITH 'Records are not found'.
exit.
stop.
ENDIF. " IF sy-subrc NE 0
ENDFORM. " retrive_data_from_mara
*& Form fieldcat
text
*There are no interface parameters to be passed to this subroutine
FORM fieldcat .
*field catalog for MATNR
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'MATNR'.
t_fieldcat-col_pos = 1.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
*field catalog for ERNAM
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'ERNAM'.
t_fieldcat-col_pos = 2.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
*field catalog for AENAM
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'AENAM'.
t_fieldcat-col_pos = 3.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
*field catalog for PSTAT
t_FIELDCAT-REF_TABNAME = 'MARA'.
t_fieldcat-fieldname = 'PSTAT'.
t_fieldcat-col_pos = 4.
append t_fieldcat to fs_fieldcat.
clear t_fieldcat.
ENDFORM. " fieldcat
*& Form EVENT_LIST
text
*There are no interface parameters to be passed to this subroutine
FORM EVENT_LIST .
fs_event-name ='TOP_OF_PAGE'.
fs_event-form = 'TOP_PAGE'.
append fs_event TO t_EVENT.
CLEAR FS_EVENT.
fs_event-name ='END_OF_PAGE'.
fs_event-form = 'END_PAGE'.
append fs_event TO t_EVENT.
CLEAR FS_EVENT.
fs_event-name ='END_OF_LIST'.
fs_event-form = 'LIST_END'.
append fs_event TO t_EVENT.
CLEAR FS_EVENT.
ENDFORM. " EVENT_LIST
*& Form alv_display
text
*There are no interface parameters to be passed to this subroutine
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'MARATAB1'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT = FS_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = T_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = T_EVENT
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IR_SALV_LIST_ADAPTER =
IT_EXCEPT_QINFO =
I_SUPPRESS_EMPTY_DATA = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_MARA[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " alv_display
form TOP_PAGE.
data:tbl_listheader type slis_t_listheader,
wa_listheader type slis_listheader .
wa_listheader-typ = 'S'.
wa_listheader-info = 'Created by : Vijay Pawar'.
append wa_listheader to tbl_listheader.
wa_listheader-typ = 'S'.
concatenate ' Date ' sy-datum into
wa_listheader-info separated by space.
append wa_listheader to tbl_listheader.
wa_listheader-typ = 'S'.
concatenate ' From ' s_matnr-low ' To ' s_matnr-high into
wa_listheader-info separated by space.
append wa_listheader to tbl_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = tbl_listheader
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
endform. " form TOP_PAGE.
form END_PAGE.
STATICS W_PAGE TYPE I .
data:tbl_listheader type slis_t_listheader,
wa_listheader type slis_listheader .
wa_listheader-typ = 'S'.
wa_listheader-info = W_PAGE.
append wa_listheader to tbl_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = tbl_listheader
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
add 1 to w_page.
endform. " form END_PAGE.
form list_end.
data:tbl_listheader type slis_t_listheader,
wa_listheader type slis_listheader .
wa_listheader-typ = 'S'.
wa_listheader-info = '......................................Last Page'
append wa_listheader to tbl_listheader.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = tbl_listheader
I_LOGO =
I_END_OF_LIST_GRID =
I_ALV_FORM =
endform. " form list_end.
*& Form maratab1
text
-->P_RT_EXTAB text
FORM maratab1 USING P_RT_EXTAB.
SET PF-STATUS 'MARATAB1' EXCLUDING rt_extab.
ENDFORM. " maratab1
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
case r_ucomm.
when 'ENTER'.
perform bulid_xls_data_table.
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email "'[email protected]'
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
perform populate_email_message_body.
PERFORM initiate_mail_execute_program.
endcase. " case r_ucomm.
endform. " FORM user_command
perform populate_email_message_body.
PERFORM initiate_mail_execute_program.
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
DATA_FILENAME = 'MARA.XLS'
DATA_PATH_FLAG = 'W'
DATA_ENVIRONMENT =
DATA_TABLE = ITAB[]
MACRO_FILENAME =
MACRO_PATH_FLAG = 'E'
MACRO_ENVIRONMENT =
WAIT = 'X'
DELETE_FILE = 'X'
EXCEPTIONS
NO_BATCH = 1
EXCEL_NOT_INSTALLED = 2
INTERNAL_ERROR = 3
CANCELLED = 4
DOWNLOAD_ERROR = 5
NO_AUTHORITY = 6
FILE_NOT_DELETED = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
leave to list-processing.
endcase.
*& Form bulid_xls_data_table
text
*There are no interface parameters to be passed to this subroutine
FORM bulid_xls_data_table .
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'matnr' 'ernam' 'aenam' 'pstat'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT It_mara INTO wa_charmara.
CONCATENATE wa_charmara-matnr wa_charmara-ernam
wa_charmara-aenam wa_charmara-pstat
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP. " LOOP AT it_mara INTO...
ENDFORM. " bulid_xls_data_table
*& Form send_file_as_email_attachment
Send email
-->P_IT_MESSAGE text
-->P_IT_ATTACH text
-->P_P_EMAIL text
-->P_0387 text
-->P_0388 text
-->P_0389 text
-->P_0390 text
-->P_0391 text
-->P_0392 text
<--P_GD_ERROR text
<--P_GD_RECIEVER text
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM. " send_file_as_email_attachment
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test mara records'.
APPEND it_message.
endform. "form populate_email_message_bod
rewards if it helps u -
Set pf_status in REUSE_ALV_GRID_DISPLAY
Hi All,
I am using the 'i_callback_pf_status_set' from the FUNCTION 'REUSE_ALV_GRID_DISPLAY' and I see the output but the pf_status is not working. I donot see the buttin I created not even basic BACK and SAvE are working. When I activate the program I am getting the warning like '
when you pass SY-REPID DIRECTLY, "I_CALLBACK_PROGRAM" is set to the name ot the function group "REUSE_ALV_GRID_DISPLAY"'.
Please help me how to set the pf_status in the ALV.
Thanks,
Neelu.
REPORT zppprice1 .
TABLES: zppprice, kna1.
* ALV Type-Pools *
TYPE-POOLS: slis. "Global types
* ALV Structures *
* ALV layout catalog
DATA: s_alv_layout_cat TYPE slis_layout_alv.
* ALV Tables *
* ALV field catalog
DATA: it_alv_field_cat TYPE slis_t_fieldcat_alv,
*occurs 0 with header line,
i_fieldcat TYPE slis_fieldcat_alv OCCURS 0 WITH HEADER LINE,
w_fieldcat LIKE LINE OF i_fieldcat. "ALV FieldCat WorkArea
* ALV sort catalog
DATA: it_alv_sort_cat TYPE slis_sortinfo_alv OCCURS 0 WITH HEADER LINE.
* ALV event catalog
*data: it_alv_event_cat type slis_alv_event occurs 0 with header line.
DATA: it_alv_event_cat TYPE slis_t_event,
ls_alv_event TYPE slis_alv_event.
DATA: t_list_top_of_page TYPE slis_t_listheader.
TYPES: BEGIN OF slis_layout_alv.
INCLUDE TYPE slis_layout_main.
INCLUDE TYPE slis_layout_alv_spec.
TYPES: END OF slis_layout_alv.
DATA: gt_zprice TYPE TABLE OF zprice_struct,
gs_zprice TYPE zprice_struct.
DATA: chbox(1) TYPE c VALUE ' '.
*SET PF-STATUS 'LIST'.
*NEW-PAGE LINE-SIZE 158.
SELECT kunnr matnr crdate efdate sprice
eprice eohqty aohqty crmemo
FROM zppprice
INTO TABLE gt_zprice.
PERFORM field_catalog.
* Populate the layout catalog for alv
PERFORM alv_layout.
* Populate the event catalog for alv
PERFORM alv_events.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_pf_status_set = 'PF_STATUS'
i_callback_user_command = 'HANDLE_USER_COMMAND'
is_layout = s_alv_layout_cat
it_fieldcat = it_alv_field_cat
i_default = 'X'
i_save = 'A'
it_events = it_alv_event_cat
TABLES
t_outtab = gt_zprice
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
FORM field_catalog.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
ls_fieldcat-fieldname = 'CHBOX'.
ls_fieldcat-checkbox = 'X'.
ls_fieldcat-input = 'X'.
ls_fieldcat-edit = 'X'.
ls_fieldcat-seltext_s = 'BOX'.
ls_fieldcat-seltext_l = 'BOX'.
APPEND ls_fieldcat TO it_alv_field_cat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'KUNNR'.
ls_fieldcat-seltext_s = 'Customer'.
ls_fieldcat-seltext_l = 'Customer'.
APPEND ls_fieldcat TO it_alv_field_cat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-seltext_s = 'Material'.
ls_fieldcat-seltext_l = 'Material'.
APPEND ls_fieldcat TO it_alv_field_cat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'CRDATE'.
ls_fieldcat-seltext_s = 'Creation date'.
ls_fieldcat-seltext_l = 'Creation date'.
APPEND ls_fieldcat TO it_alv_field_cat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'EFDATE'.
ls_fieldcat-seltext_s = 'Effective date'.
ls_fieldcat-seltext_l = 'Effective date'.
APPEND ls_fieldcat TO it_alv_field_cat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'SPRICE'.
ls_fieldcat-seltext_s = 'Old Price'.
ls_fieldcat-seltext_l = 'Old Price'.
APPEND ls_fieldcat TO it_alv_field_cat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'EPRICE'.
ls_fieldcat-seltext_s = 'New Price'.
ls_fieldcat-seltext_l = 'New Price'.
APPEND ls_fieldcat TO it_alv_field_cat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'EOHQTY'.
ls_fieldcat-seltext_s = 'Est. Qty'.
ls_fieldcat-seltext_l = 'Est. Qty'.
APPEND ls_fieldcat TO it_alv_field_cat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'AOHQTY'.
ls_fieldcat-seltext_s = 'Act. Qty'.
ls_fieldcat-seltext_l = 'Act. Qty'.
APPEND ls_fieldcat TO it_alv_field_cat.
CLEAR ls_fieldcat.
ENDFORM. " field_catalog
*& Form alv_layout
* text
* --> p1 text
* <-- p2 text
FORM alv_layout.
* Enable striped output display if user wants
s_alv_layout_cat-zebra = 'X'.
* Optimize column width if user wants
s_alv_layout_cat-colwidth_optimize = 'X'.
s_alv_layout_cat-box_fieldname = space.
s_alv_layout_cat-no_input = 'X'.
ENDFORM. " alv_layout
* FORM SET_PFSTATUS *
* --> EXTAB *
FORM pf_status USING extab TYPE slis_t_extab.
SET PF-STATUS 'LIST'.
ENDFORM.
* FORM HANDLE_USER_COMMAND *
* --> I_UCOM *
* --> IS_SELFIELD *
FORM handle_user_command USING i_ucom TYPE sy-ucomm
is_selfield TYPE slis_selfield.
CASE i_ucom.
WHEN 'CMEMO'.
LOOP AT gt_zprice INTO gs_zprice WHERE chbox = 'X'.
ENDLOOP.
ENDCASE.
ENDFORM.
*& Form alv_events
* text
* --> p1 text
* <-- p2 text
FORM alv_events.
* Declare event catalog for page headers
REFRESH: it_alv_event_cat.
CLEAR ls_alv_event.
ls_alv_event-name = 'PF_STATUS_SET'.
ls_alv_event-form = 'PF_STATUS'.
APPEND ls_alv_event TO it_alv_event_cat.
* Declare event catalog for report footers
CLEAR ls_alv_event.
ls_alv_event-name = 'USER_COMMAND'.
ls_alv_event-form = 'HANDLE_USER_COMMAND'.
APPEND ls_alv_event TO it_alv_event_cat.
ENDFORM. " alv_eventsYes, do not pass SY-REPID directly, first move to a variable.
data: repid type sy-repid.
repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = repid
i_callback_pf_status_set = 'PF_STATUS'
i_callback_user_command = 'HANDLE_USER_COMMAND'
is_layout = s_alv_layout_cat
it_fieldcat = it_alv_field_cat
i_default = 'X'
i_save = 'A'
it_events = it_alv_event_cat
TABLES
t_outtab = gt_zprice
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
Regards,
Rich Heilman -
How to display field value only once in REUSE_ALV_GRID_DISPLAY
hi experts,
i am using REUSE_ALV_GRID_DISPLAY, for alv outpur display.but i want one of the field in output ,not to display the value which is of same, it have to be displayed only once, I mean i have a number which contains multiple line items corresponding, here i want to display the field value only once when it is repeating , for the same header number, how can i achieve itHi,
check the sample code,
REPORT Z_ALV.
Database table declaration
TABLES:
sflight.
Typepool declaration
TYPE-POOLS:
slis.
Selection screen elements
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME TITLE text-000.
SELECT-OPTIONS:
s_carrid FOR sflight-carrid.
SELECTION-SCREEN END OF BLOCK blk_1.
Field string to hold sflight data
DATA:
BEGIN OF fs_sflight ,
carrid TYPE sflight-carrid, " Carrier Id
connid TYPE sflight-connid, " Connection No
fldate TYPE sflight-fldate, " Flight date
seatsmax TYPE sflight-seatsmax, " Maximum seats
seatsocc TYPE sflight-seatsocc, " Occupied seats
END OF fs_sflight.
Internal table to hold sflight data
DATA:
t_sflight LIKE
STANDARD TABLE
OF fs_sflight .
Work variables
DATA:
t_fieldcat TYPE slis_t_fieldcat_alv,
fs_fieldcat LIKE
LINE OF t_fieldcat.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_data_sflight. " Getting data for display
PERFORM create_field_cat. " Create field catalog
PERFORM alv_display.
*& Form create_field_cat
Subroutine to create field catalog
There is no interface paramete
FORM create_field_cat .
PERFORM fill_fieldcat USING 'Carrier Id' 'CARRID' '2'.
PERFORM fill_fieldcat USING 'Connection No' 'CONNID' '1'.
PERFORM fill_fieldcat USING 'Flight Date' 'FLDATE' '3'.
PERFORM fill_fieldcat USING 'Maxm.Seats' 'SEATSMAX' '4'.
PERFORM fill_fieldcat USING 'Seats Occ' 'SEATSOCC' '5'.
ENDFORM. "create_field_cat
*& Form fill_fieldcat
Subroutine to fill data to field column
-->p_seltext Column label
-->p_fieldname Fieldname of database table
-->p_col_pos Column position
FORM fill_fieldcat USING
p_seltext LIKE fs_fieldcat-seltext_m
p_fieldname LIKE fs_fieldcat-fieldname
p_col_pos LIKE fs_fieldcat-col_pos.
fs_fieldcat-seltext_m = p_seltext.
fs_fieldcat-fieldname = p_fieldname.
fs_fieldcat-col_pos = p_col_pos.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
ENDFORM. " fill_fieldcat
*& Form get_data_sflight
Subroutine to fetch data from database table
There is no interface parameter
FORM get_data_sflight .
SELECT carrid
connid
fldate
seatsmax
seatsocc
FROM sflight
INTO TABLE t_sflight
WHERE carrid IN s_carrid.
ENDFORM. " get_data_sflight
*& Form alv_display
Subroutine for ALV display
There is no interface parameter
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_fieldcat = t_fieldcat
TABLES
t_outtab = t_sflight
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " alv_display
End of code -
Unable to resolve the exception READ_REPORT_LINE_TOO_LONG in Abap program.
Hi,
I am getting the exception READ_REPORT_LINE_TOO_LONG in my abap program.Given below is the full analysis of the exception and then the program code :-
Error Analysis :-
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_READ_SRC_LINE_TOO_LONG', was
not caught in
procedure "K_KKB_FIELDCAT_MERGE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
There was an attempt to read program "ZANI_TEST_INTERACTIVE_ALV" from the
database.
The READ REPORT statement allows you to copy a program text into an
internal table. The occupied line length in the program text must not
exceed the width of the internal table.
The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
characters wide. The program line is
91 characters wide.
Program Code :-
*& Report ZANI_TEST_INTERACTIVE_ALV
REPORT ZANI_TEST_INTERACTIVE_ALV.
TABLES: LFA1.
TYPE-POOLS: slis.
DATA: it_lfa1 TYPE TABLE OF lfa1,
wa_lfa1 TYPE lfa1,
it_fieldcat TYPE slis_t_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE input.
SELECT-OPTIONS: acc_no FOR LFA1-LIFNR.
SELECTION-SCREEN END OF BLOCK input.
START-OF-SELECTION.
IF NOT acc_no IS INITIAL.
SELECT * FROM LFA1
INTO CORRESPONDING FIELDS OF TABLE it_lfa1
WHERE LIFNR IN acc_no.
ELSE.
SELECT * FROM LFA1
INTO CORRESPONDING FIELDS OF TABLE it_lfa1.
ENDIF.
PERFORM form_build_fieldcatalog USING 'IT_LFA1' CHANGING it_fieldcat.
PERFORM form_display_alv USING it_lfa1 it_fieldcat.
*& Form form_build_fieldcatalog
text
-->P_0058 text
<--P_IT_FIELDCAT text
form form_build_fieldcatalog using p_it_tabname TYPE slis_tabname
changing p_it_fieldcat TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = sy-repid
I_INTERNAL_TABNAME = p_it_tabname
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = sy-repid
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = p_it_fieldcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " form_build_fieldcatalog
*& Form form_display_alv
text
-->P_IT_LFA1 text
form form_display_alv using p_it_lfa1 LIKE it_lfa1 p_it_fieldcat TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = P_it_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = p_it_lfa1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. " form_display_alv
Please suggest a solution for this problem.. Thanks in advance.hi,
it is getting because of fieldcat hear ur internal table is having all fields in lfa1, lfa1 is having more fileds alv cont display that much fields at a time . for that u are getting that messgae . u can solve this problem by filling fieldcat table manuvally insted of by FM 'fieldcat_merge'. fill filedcat table some fields which are need to display by manuvally.
thanq,
rajesh.k -
FM REUSE_ALV_GRID_DISPLAY - runtime error
I get the following error when I use FM REUSE_ALV_GRID_DISPLAY:
"Field catalog not found".
I realize that it is looking for the parameter it_fieldcat but I don't remember ever passing that parameter before; it also says that it is optional. Below is my call to the FM. Does the addition of it_sort mean that I must pass it_fieldcat?
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
* I_CALLBACK_PROGRAM = ' '
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
* I_GRID_TITLE =
* I_GRID_SETTINGS =
* IS_LAYOUT =
* it_fieldcat = it_fieldcat
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
* is_print = is_print
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_out
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
DavisDavis,
I dont know how much it will be of help to you. But this is how I used in one of my programs.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BACKGROUND_ID = 'ALV_BACKGROUND'
I_CALLBACK_PROGRAM = G_REPID
* I_STRUCTURE_NAME = 'SFLIGHT'
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = f_cat[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS = GT_SP_GROUP[]
* IT_SORT = GT_SORT[]
* IT_FILTER =
* IS_SEL_HIDE =
* i_default = g_default
I_SAVE = G_SAVE
IS_VARIANT = G_VARIANT
IT_EVENTS = GT_xEVENTS
* IT_EVENT_EXIT =
* IS_PRINT = GS_PRINT
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
TABLES
T_OUTTAB = bestand.
Regards
Aneesh. -
HOW TO USE OOBJECT ORIENTD ALV INSTED OF REUSE_ALV_GRID_DISPLAY
Pls help me to implement the object oriented ALV Insted of REUSE_ALV_GRID_DISPLAY.
Pls find the report below its working fine but we want the OBJECT ORIENTD ALV.
THNAKS
TYPE-POOLS: slis. " ALV Global types
tables:pa0001,
pa0315,
pa0007,
disvariant.
Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
*SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_pernr FOR pa0001-pernr OBLIGATORY
. " Personnel No
SELECT-OPTIONS: s_orgeh FOR pa0001-orgeh . " Organization unit
SELECT-OPTIONS: s_werks FOR pa0001-werks. " Personnel Area
SELECT-OPTIONS: s_plans FOR pa0001-plans. " Position
SELECT-OPTIONS: s_ebeln FOR pa0315-ebeln. " Purchase order
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK b2k2 WITH FRAME TITLE text-002.
*SELECT-OPTIONS: s_var FOR disvariant-variant.
PARAMETERS: p_disva1 LIKE disvariant-variant.
SELECTION-SCREEN END OF BLOCK b2k2.
Type Definition *
TYPES :
BEGIN OF ty_pa0001_pa0002,
pernr TYPE pa0001-pernr , " Personnel no.
endda TYPE pa0001-endda , " end date
begda TYPE pa0001-begda , " start date
bukrs TYPE pa0001-bukrs , " company code
werks TYPE pa0001-werks , " Personnnel area
persg TYPE pa0001-persg , " Employee group
persk TYPE pa0001-persk , " Employee subgroup
btrtl TYPE pa0001-btrtl , " Personnnel subarea
abkrs TYPE pa0001-abkrs , " Payroll area
kostl TYPE pa0001-kostl , " cost center
orgeh TYPE pa0001-orgeh , " Organizational Unit
plans TYPE pa0001-plans , " Position
nachn TYPE pa0002-nachn , " Last name
vorna TYPE pa0002-vorna , " First name
midnm TYPE pa0002-midnm , " Middle name
END OF ty_pa0001_pa0002 ,
BEGIN OF ty_pa0315,
pernr TYPE pa0315-pernr , " Personnel no.
kostl TYPE pa0315-kostl , " Sending cost center
lstar TYPE pa0315-lstar , " Activity type
werks TYPE pa0315-werks , " Plant
lifnr TYPE pa0315-lifnr , " Vendor number
ebeln TYPE pa0315-ebeln , " Sending pruchase ord
ebelp TYPE pa0315-ebelp , " Sending PO item
lstnr TYPE pa0315-lstnr , " Activity number
END OF ty_pa0315,
BEGIN OF ty_pa0007,
pernr TYPE pa0007-pernr,
schkz TYPE pa0007-schkz,
END OF ty_pa0007,
BEGIN OF ty_t527x,
orgeh TYPE t527x-orgeh,
orgtx TYPE t527x-orgtx,
END OF ty_t527x,
BEGIN OF ty_t528t,
plans TYPE t528t-plans,
plstx TYPE t528t-plstx,
END OF ty_t528t,
BEGIN OF ty_final,
pernr TYPE pa0001-pernr , " Personnel no.
nachn TYPE pa0002-nachn , " Last name
vorna TYPE pa0002-vorna , " First name
midnm TYPE pa0002-midnm , " Middle name
bukrs TYPE pa0001-bukrs , " company code
werks TYPE pa0001-werks , " Personnnel area
persg TYPE pa0001-persg , " Employee group
persk TYPE pa0001-persk , " Employee subgroup
btrtl TYPE pa0001-btrtl , " Personnnel subarea
abkrs TYPE pa0001-abkrs , " Payroll area
kostl TYPE pa0001-kostl , " cost center
orgeh TYPE pa0001-orgeh , " Organizational Unit
orgtx TYPE t527x-orgtx , " Organizational text
plans TYPE pa0001-plans , " Position
plstx TYPE t528t-plstx , " Position text
schkz TYPE pa0007-schkz , " Work schedule rule
kostl TYPE pa0315-kostl , " Sending cost center
lstar TYPE pa0315-lstar , " Activity type
werks_p TYPE pa0315-werks , " Plant
lifnr TYPE pa0315-lifnr , " Vendor number
ebeln TYPE pa0315-ebeln , " Sending pruchase ord
ebelp TYPE pa0315-ebelp , " Sending PO item
lstnr TYPE pa0315-lstnr , " Activity number
begda TYPE pa0001-begda , " start date
endda TYPE pa0001-endda , " end date
END OF ty_final.
Data Declaration *
DATA :
t_pa0001_pa0002 TYPE STANDARD TABLE OF ty_pa0001_pa0002 ,
w_pa0001_pa0002 TYPE ty_pa0001_pa0002 ,
t_pa0315 TYPE STANDARD TABLE OF ty_pa0315 ,
w_pa0315 TYPE ty_pa0315 ,
t_pa0007 TYPE STANDARD TABLE OF ty_pa0007 ,
w_pa0007 TYPE ty_pa0007 ,
t_t527x TYPE STANDARD TABLE OF ty_t527x ,
w_t527x TYPE ty_t527x ,
t_t528t TYPE STANDARD TABLE OF ty_t528t ,
w_t528t TYPE ty_t528t ,
t_final TYPE STANDARD TABLE OF ty_final ,
w_final TYPE ty_final .
START-OF-SELECTION .
SELECT a~pernr
a~endda
a~begda
a~bukrs
a~werks
a~persg
a~persk
a~btrtl
a~abkrs
a~kostl
a~orgeh
a~plans
b~nachn
b~vorna
b~midnm
INTO TABLE t_pa0001_pa0002
FROM pa0001 AS a INNER JOIN pa0002 AS b
ON apernr = bpernr
WHERE a~pernr IN s_pernr
AND a~werks IN s_werks
AND a~orgeh IN s_orgeh
AND a~plans IN s_plans.
SORT t_pa0001_pa0002 BY pernr .
IF NOT t_pa0001_pa0002[] IS INITIAL .
SELECT pernr
kostl
lstar
werks
lifnr
ebeln
ebelp
lstnr
FROM pa0315
INTO TABLE t_pa0315
FOR ALL ENTRIES IN t_pa0001_pa0002
WHERE pernr = t_pa0001_pa0002-pernr
AND kostl = t_pa0001_pa0002-kostl
AND ebeln IN s_ebeln.
SELECT pernr
schkz
FROM pa0007
INTO TABLE t_pa0007
FOR ALL ENTRIES IN t_pa0001_pa0002
WHERE pernr = t_pa0001_pa0002-pernr.
SELECT orgeh
orgtx
FROM t527x
INTO TABLE t_t527x
FOR ALL ENTRIES IN t_pa0001_pa0002
WHERE orgeh = t_pa0001_pa0002-orgeh.
SELECT plans
plstx
FROM t528t
INTO TABLE t_t528t
FOR ALL ENTRIES IN t_pa0001_pa0002
WHERE plans = t_pa0001_pa0002-plans.
ENDIF.
Merging data of t_pa0001_pa0002,t_pa0315 & t_pa0007 into t_final.
LOOP AT t_pa0001_pa0002 INTO w_pa0001_pa0002 .
MOVE-CORRESPONDING w_pa0001_pa0002 TO w_final.
READ TABLE t_pa0315 INTO w_pa0315 WITH KEY pernr =
w_pa0001_pa0002-pernr
kostl = w_pa0001_pa0002-kostl.
IF sy-subrc = 0.
w_final-kostl = w_pa0315-kostl.
w_final-lstar = w_pa0315-lstar.
w_final-werks_p = w_pa0315-werks.
w_final-lifnr = w_pa0315-lifnr.
w_final-ebeln = w_pa0315-ebeln.
w_final-ebelp = w_pa0315-ebelp.
w_final-lstnr = w_pa0315-lstnr.
ENDIF.
READ TABLE t_pa0007 INTO w_pa0007 WITH KEY pernr =
w_pa0001_pa0002-pernr.
IF sy-subrc = 0.
w_final-schkz = w_pa0007-schkz.
ENDIF.
READ TABLE t_t527x INTO w_t527x WITH KEY orgeh = w_pa0001_pa0002-orgeh
IF sy-subrc = 0.
w_final-orgtx = w_t527x-orgtx.
ENDIF.
READ TABLE t_t528t INTO w_t528t WITH KEY plans =
w_pa0001_pa0002-plans.
IF sy-subrc = 0.
w_final-plstx = w_t528t-plstx.
ENDIF.
APPEND w_final to t_final.
ENDLOOP.
PERFORM f_display_data.
FORM f_display_data.
DATA:
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv.
Build the field catalog
m_fieldcat 'PERNR' 'PA0001'.
m_fieldcat 'NACHN' 'PA0002'.
m_fieldcat 'VORNA' 'PA0002'.
m_fieldcat 'MIDNM' 'PA0002'.
m_fieldcat 'BUKRS' 'PA0001'.
m_fieldcat 'WERKS' 'PA0001'.
m_fieldcat 'PERSG' 'PA0001'.
m_fieldcat 'PERSK' 'PA0001'.
m_fieldcat 'BTRTL' 'PA0001'.
m_fieldcat 'ABKRS' 'PA0001'.
m_fieldcat 'ORGEH' 'PA0001'.
m_fieldcat 'ORGTX' 'T527X'.
m_fieldcat 'PLANS' 'PA0001'.
m_fieldcat 'PLSTX' 'T528T'.
m_fieldcat 'SCHKZ' 'PA0007'.
m_fieldcat 'KOSTL' 'PA0315'.
m_fieldcat 'LSTAR' 'PA0315'.
m_fieldcat 'WERKS' 'PA0315'.
m_fieldcat 'LIFNR' 'PA0315'.
m_fieldcat 'EBELN' 'PA0315'.
m_fieldcat 'EBELP' 'PA0315'.
m_fieldcat 'LSTNR' 'PA0315'.
m_fieldcat 'BEGDA' 'PA0001'.
m_fieldcat 'ENDDA' 'PA0001'.
ls_fieldcat-col_pos = '1'.
ls_fieldcat-fieldname = 'PERNR'.
ls_fieldcat-tabname = 't_FINAL'.
*ls_fieldcat-rollname = 'PERNR'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '2'.
ls_fieldcat-fieldname = 'NACHN'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0002'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '3'.
ls_fieldcat-fieldname = 'VORNA'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0002'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '4'.
ls_fieldcat-fieldname = 'MIDNM'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0002'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '5'.
ls_fieldcat-fieldname = 'BUKRS'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '6'.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '7'.
ls_fieldcat-fieldname = 'PERSG'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '8'.
ls_fieldcat-fieldname = 'PERSK'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '9'.
ls_fieldcat-fieldname = 'BTRTL'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '10'.
ls_fieldcat-fieldname = 'ABKRS'.
ls_fieldcat-tabname = 'T_FINAL'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '11'.
ls_fieldcat-fieldname = 'ORGEH'.
ls_fieldcat-tabname = 'T_FINAL'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '12'.
ls_fieldcat-fieldname = 'ORGTX'.
ls_fieldcat-tabname = 'T_FINAL'.
ls_fieldcat-ref_tabname = 'T527X'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '13'.
ls_fieldcat-fieldname = 'PLANS'.
ls_fieldcat-tabname = 'T_FINAL'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '14'.
ls_fieldcat-fieldname = 'PLSTX'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'T528T'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '15'.
ls_fieldcat-fieldname = 'SCHKZ'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0007'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '16'.
ls_fieldcat-fieldname = 'KOSTL'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '17'.
ls_fieldcat-fieldname = 'LSTAR'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '18'.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '19'.
ls_fieldcat-fieldname = 'LIFNR'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '20'.
ls_fieldcat-fieldname = 'EBELN'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '21'.
ls_fieldcat-fieldname = 'EBELP'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '22'.
ls_fieldcat-fieldname = 'LSTNR'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0315'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '23'.
ls_fieldcat-fieldname = 'BEGDA'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
ls_fieldcat-col_pos = '24'.
ls_fieldcat-fieldname = 'ENDDA'.
ls_fieldcat-tabname = 't_FINAL'.
ls_fieldcat-ref_tabname = 'PA0001'.
APPEND ls_fieldcat TO lt_fieldcat.
CLEAR: ls_fieldcat.
*DATA: v_repid TYPE sy-repid.
v_repid = sy-repid.
*Display the list
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_program = v_repid
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = lt_fieldcat
TABLES
t_outtab = t_final.
ENDFORM. " F_DISPLAY_DATAHi,
<b>Sample programs on ALV Grid</b>
report zbnstest.
* TABLES AND DATA DECLARATION.
*TABLES: mara,makt.",marc.
data syrepid like sy-repid.
data sydatum(10). " LIKE sy-datum.
data sypagno(3) type n.
* WHEN USING MORE THAN ONE TABLE IN ALV WE NEEED TO DECLARE THE TYPE
* GROUP (TYPE-POOLS--------->SLIS)
type-pools : slis.
* INTERNAL TABLE DECLARATION.
* INTERNAL TABLE TO HOLD THE VALUES FROM THE MARA TABLE
data: begin of t_mara occurs 0,
matnr like mara-matnr,
meins like mara-meins,
mtart like mara-mtart,
matkl like mara-matkl,
end of t_mara.
* INTERNAL TABLE TO HOLD THE CONTENTS FROM THE EKKO TABLE
data : begin of t_marc occurs 0,
matnr like mara-matnr,
werks like marc-werks,
minbe like marc-minbe.
data: end of t_marc.
* INTERNAL TABLE TO HOLD THE VALUES FROM MAKT TABLE.
data : begin of t_makt occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
spras like makt-spras,
end of t_makt.
* INTERNAL TABLE WHICH ACTUALLY MERGES ALL THE OTHER INTERNAL TABLES.
data: begin of itab1 occurs 0,
matnr like mara-matnr,
meins like mara-meins,
maktx like makt-maktx,
spras like makt-spras,
werks like marc-werks,
minbe like marc-minbe,
end of itab1.
* THE FOLLOWING DECLARATION IS USED FOR DEFINING THE FIELDCAT
* AND THE LAYOUT FOR THE ALV.
* HERE AS slis_t_fieldcat_alv IS A INTERNAL TABLE WITHOUT A HEADER LINE
* WE EXPLICITELY DEFINE AN INTERNAL TABLE OF THE SAME STRUCTURE AS THAT
* OF slis_t_fieldcat_alv BUT WITH A HEADER LINE IN THE DEFINITION.
* THIS IS DONE TO MAKE THE CODE SIMPLER.
* OTHERWISE WE MAY HAVE TO DEFINE THE STRUCTURE AS IN THE NORMAL SAP
* PROGRAMS.
* IN THE FIELDCATALOG TABLE WE ACTUALLY PASS THE FIELDS FROM ONE OR
* MORE TABLES AND CREATE A STRUCTURE
* IN THE LAYOUT STRUCTURE WE BASICALLY DEFINE THE FORMATTING OPTIONS
* LIKE DISPLAY IN THE ZEBRA PATTERN ,THE HOTSPOT OPTIONS ETC.
data: fieldcatalog type slis_t_fieldcat_alv with header line,
fieldlayout type slis_layout_alv.
* DECLARING THE EVENTTABLE INTERNL TABLE FOR USING EVENTS LIKE
* TOP-OF-PAGE ETC.
data : eventstab type slis_t_event with header line.
* DECLARING AN INTERNAL TABLE TO HOLD THE DATA FOR THE TOP-OF-PAGE
data : heading type slis_t_listheader with header line.
data : heading1 type slis_t_listheader with header line.
data : heading2 type slis_t_listheader with header line.
data : heading3 type slis_t_listheader with header line.
data : heading4 type slis_t_listheader with header line.
data : heading5 type slis_t_listheader with header line.
data : heading6 type slis_t_listheader with header line.
data : heading7 type slis_t_listheader with header line.
data : heading8 type slis_t_listheader with header line.
* STRUCTURE TO PASS THE COLOR ATTRIBUTES FOR DISPLAY.
data : colorstruct type slis_coltypes.
* INITIALIZATION. *
initialization.
syrepid = sy-repid.
sypagno = sy-pagno.
clear fieldcatalog.
* START-OF-SELECTION. *
start-of-selection.
* SUBROUTINE TO POPULATE THE COLORSTRUCT
perform fill_colorstruct using colorstruct.
* SUBROUTINE TO POPULATE THE FIELDS OF THE FIELD CATALOGUE
perform populate_fieldcatalog.
* SUBROUTINE TO SELECT DATA FROM VARIOUS TABLES AND POPULATE IT IN THE
* INTERNAL TABLE.
perform selectdata_and_sort.
* SUBROUTINE TO POPULATE THE LAYOUT STRUCTURE.
perform populate_layout using fieldlayout.
* SUBROUTINE TO CALL THE FUNCTION MERGE TO ENSURE PROPER DISPLAY.
perform merge_fieldcatalog.
* SUBROUTINE TO POPULATE THE EVENTSTAB.
perform fill_eventstab tables eventstab.
* SUBROUTINE TO POPULATE THE HEADING TABLES.
perform fill_headingtable tables heading using 'HEADING'.
perform fill_headingtable tables heading1 using 'HEADING1'.
perform fill_headingtable tables heading2 using 'HEADING2'.
perform fill_headingtable tables heading3 using 'HEADING3'.
perform fill_headingtable tables heading4 using 'HEADING4'.
perform fill_headingtable tables heading5 using 'HEADING5'.
perform fill_headingtable tables heading6 using 'HEADING6'.
perform fill_headingtable tables heading7 using 'HEADING7'.
perform fill_headingtable tables heading8 using 'HEADING8'.
* SUBROUTINE TO DISPLAY THE LIST.
perform display_alv_list.
* FORMS
* IN THIS SUBROUTINE WE POPULATE THE FIELDCATALOG TABLE WITH THE NAMES
* OF THE TABLE,FIELDNAME,WHETHER IT IS KEY FIELD OR NOT,HEADING AND
* COLUMN JUSTIFICATION.
form populate_fieldcatalog.
perform fill_fields_of_fieldcatalog tables fieldcatalog
using 'ITAB1' 'MATNR' 'X' .
perform fill_fields_of_fieldcatalog tables fieldcatalog
using 'ITAB1' 'MEINS' ' '.
perform fill_fields_of_fieldcatalog tables fieldcatalog
using 'ITAB1' 'MAKTX' ' ' .
perform fill_fields_of_fieldcatalog tables fieldcatalog
using 'ITAB1' 'MTART' ' ' .
perform fill_fields_of_fieldcatalog tables fieldcatalog
using 'ITAB1' 'MATKL' ' ' .
perform fill_fields_of_fieldcatalog tables fieldcatalog
using 'ITAB1' 'SPRAS' ' ' .
perform fill_fields_of_fieldcatalog tables fieldcatalog
using 'ITAB1' 'WERKS' ' ' .
perform fill_fields_of_fieldcatalog tables fieldcatalog
using 'ITAB1' 'MINBE' ' ' .
endform. " POPULATE_FIELDCATALOG
* FORM FILL_FIELDS_OF_FIELDCATALOG *
* --> FIELDCATALOG *
* --> P_TABNAME *
* --> P_FIELDNAME *
* --> P_KEY *
* --> P_KEY *
form fill_fields_of_fieldcatalog tables fieldcatalog
structure fieldcatalog
using p_tabname
p_fieldname
p_key.
* p_no_out.
fieldcatalog-tabname = p_tabname.
fieldcatalog-fieldname = p_fieldname.
fieldcatalog-key = p_key.
fieldcatalog-emphasize = '1234'.
*fieldcatalog-no_out = p_no_out.
append fieldcatalog.
endform. " FILL_FIELDSOFFIELDCATALOG
* FORM POPULATE_LAYOUT *
* --> FIELDLAYOUT *
form populate_layout using fieldlayout type slis_layout_alv.
fieldlayout-f2code = '&ETA' .
fieldlayout-zebra = 'X'.
* FOR THE WINDOW TITLE.
fieldlayout-window_titlebar = 'ALV with Events'.
fieldlayout-colwidth_optimize = 'X'.
fieldlayout-no_vline = ' '.
*fieldlayout-no_input = 'X'.
fieldlayout-confirmation_prompt = ''.
fieldlayout-key_hotspot = 'X'.
* This removes the column headings if the flag is set to 'X'
fieldlayout-no_colhead = ' '.
*fieldlayout-hotspot_fieldname = 'MAKTX'.
fieldlayout-detail_popup = 'X'.
* fieldlayout-coltab_fieldname = 'X'.
endform. " POPULATE_LAYOUT
* FORM SELECTDATA_AND_SORT *
form selectdata_and_sort.
select matnr meins mtart matkl from mara
into corresponding fields of t_mara
up to 500 rows .
select matnr maktx spras from makt
into corresponding fields of t_makt
where matnr = t_mara-matnr and
spras = sy-langu.
select matnr werks minbe from marc
into corresponding fields of t_marc
where matnr = t_mara-matnr.
append t_marc.
endselect.
append t_makt.
endselect.
append t_mara.
endselect.
perform populate_itab1.
sort itab1 by matnr.
endform. " SELECTDATA_AND_SORT
* FORM MERGE_FIELDCATALOG *
form merge_fieldcatalog.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = syrepid
i_internal_tabname = 'ITAB1'
* i_structure_name = 'COLORSTRUCT'
* I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = syrepid
changing
ct_fieldcat = fieldcatalog[]
exceptions
inconsistent_interface = 1
program_error = 2
others = 3.
endform. " MERGE_FIELDCATALOG
* IN THIS FUNCTION THE MINIMUM PARAMETERS THAT WE NEED TO PASS IS AS
* FOLLOWS:-
* i_callback_program --> CALLING PROGRAM NAME
* i_structure_name --> STRUCTURE NAME.
* is_layout --> LAYOUT NAME.
* it_fieldcat ---> BODY OF THE FIELD CATALOGUE INTERNAL TABLE
form display_alv_list.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
* I_INTERFACE_CHECK = ' '
i_callback_program = syrepid
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
i_structure_name = 'ITAB1'
is_layout = fieldlayout
it_fieldcat = fieldcatalog[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* THE FOLLOWING PARAMETER IS SET AS 'A' INORDER TO DISPLAY THE STANDARD
* TOOL BAR
i_save = 'A'
* IS_VARIANT = ' '
it_events = eventstab[]
* IT_EVENT_EXIT =
* IS_PRINT =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = itab1
exceptions
program_error = 1
others = 2.
endform. " DISPLAY_ALV_LIST
*& Form POPULATE_ITAB1
* text
* --> p1 text
* <-- p2 text
form populate_itab1.
loop at t_mara.
loop at t_makt where matnr = t_mara-matnr.
loop at t_marc where matnr = t_mara-matnr.
move-corresponding t_mara to itab1.
move-corresponding t_makt to itab1.
move-corresponding t_marc to itab1.
append itab1.
endloop.
endloop.
endloop.
endform. " POPULATE_ITAB1
*& Form FILL_EVENTSTAB
* text
* -->P_EVENTSTAB text *
form fill_eventstab tables p_eventstab structure eventstab.
* WHEN THE FOLLOWING FUNCTION IS CALLED THE SYSTEM POPULATES THE
* INTERNAL TABLE EVENTSTAB WITH A LIST OF EVENTS NAME.
* AS SHOWN BELOW WHEN USING I_LIST_TYPE = 0 THE FUNCTION RETURNS 14
* EVENTS NAME.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_eventstab[]
exceptions
list_type_wrong = 1
others = 2.
* BY CALLING THE ABOVE FUNCTION WE FIRST POPULATE THE EVENTSTAB WITH
* THE PREDEFINED EVENTS AND THEN WE MOVE THE FORM NAME AS SHOWN BELOW.
* WE ASSIGN A FORM NAME TO THE EVENT AS REQUIRED BY THE USER.
* FORM NAME CAN BE ANYTHING.THE PERFORM STATEMENT FOR THIS FORM
* IS DYNAMICALY CALLED.
read table p_eventstab with key name = slis_ev_top_of_page.
if sy-subrc = 0 .
move 'TOP_OF_PAGE' to p_eventstab-form.
append p_eventstab.
endif.
read table p_eventstab with key name = slis_ev_top_of_coverpage.
if sy-subrc = 0 .
move 'TOP_OF_COVERPAGE' to p_eventstab-form.
append p_eventstab.
endif.
read table p_eventstab with key name = slis_ev_end_of_coverpage .
if sy-subrc = 0 .
move 'END_OF_COVERPAGE' to p_eventstab-form.
append p_eventstab.
endif.
read table p_eventstab with key name = slis_ev_foreign_top_of_page.
if sy-subrc = 0 .
move 'FOREIGN_TOP_OF_PAGE' to p_eventstab-form.
append p_eventstab.
endif.
read table p_eventstab with key name = slis_ev_foreign_end_of_page.
if sy-subrc = 0 .
move 'FOREIGN_END_OF_PAGE' to p_eventstab-form.
append p_eventstab.
endif.
read table p_eventstab with key name = slis_ev_list_modify.
if sy-subrc = 0 .
move 'LIST_MODIFY' to p_eventstab-form.
append p_eventstab.
endif.
read table p_eventstab with key name = slis_ev_top_of_list.
if sy-subrc = 0 .
move 'TOP_OF_LIST' to p_eventstab-form.
append p_eventstab.
endif.
read table p_eventstab with key name = slis_ev_end_of_page.
if sy-subrc = 0 .
move 'END_OF_PAGE' to p_eventstab-form.
append p_eventstab.
endif.
read table p_eventstab with key name = slis_ev_end_of_list .
if sy-subrc = 0 .
move 'END_OF_LIST' to p_eventstab-form.
append p_eventstab.
endif.
endform. " FILL_EVENTSTAB
*& Form FILL_HEADINGTABLE
* text
* -->P_HEADING text *
form fill_headingtable tables p_heading structure heading
using tablename.
case tablename.
when 'HEADING'.
p_heading-typ = 'H'.
concatenate
' REPORT NAME:-' syrepid
' ABB Industry Pte Ltd' into p_heading-info.
append p_heading.
write sy-datum using edit mask '__/__/____' to sydatum.
concatenate
' DATE:-' sydatum ' USER: ' sy-uname 'PAGE NO:' sypagno
into p_heading-info.
append p_heading.
when 'HEADING1'.
p_heading-typ = 'H'.
p_heading-info = 'TOP-OF-COVER-PAGE'.
append p_heading.
when 'HEADING2'.
p_heading-typ = 'H'.
p_heading-info = 'END-OF-COVER-PAGE'.
append p_heading.
when 'HEADING3'.
p_heading-typ = 'H'.
p_heading-info = 'FOREIGN-TOP-OF-PAGE'.
append p_heading.
when 'HEADING4'.
p_heading-typ = 'H'.
p_heading-info = 'FOREIGN-END-OF-PAGE'.
append p_heading.
* WHEN 'HEADING5'.
* P_HEADING-TYP = 'H'.
* P_HEADING-INFO = 'LIST-MODIFY'.
* APPEND P_HEADING.
when 'HEADING6'.
p_heading-typ = 'H'.
p_heading-info = 'END-OF-PAGE'.
append p_heading.
when 'HEADING7'.
p_heading-typ = 'H'.
p_heading-info = 'END-OF-LIST'.
append p_heading.
when 'HEADING8'.
p_heading-typ = 'H'.
p_heading-info = 'TOP-OF-LIST'.
append p_heading.
endcase.
endform. " FILL_HEADINGTABLE
* FORM TOP_OF_PAGE *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = heading[]
exceptions
others = 1.
endform.
*& Form FILL_COLORSTRUCT
* text
* -->P_COLORSTRUCT text *
form fill_colorstruct using p_colorstruct type slis_coltypes .
p_colorstruct-heacolfir-col = 6.
p_colorstruct-heacolfir-int = 1.
p_colorstruct-heacolfir-inv = 1.
endform. " FILL_COLORSTRUCT
* FORM TOP_OF_COVERPAGE *
form top_of_coverpage.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = heading1[]
exceptions
others = 1.
endform.
* FORM END_OF_COVERPAGE *
form end_of_coverpage.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = heading2[]
exceptions
others = 1.
endform.
* FORM FOREIGN_TOP_OF_PAGE *
form foreign_top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = heading3[]
exceptions
others = 1.
endform.
* FORM FOREIGN_END_OF_PAGE *
form foreign_end_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = heading4[]
exceptions
others = 1.
endform.
* FORM LIST_MODIFY *
*FORM LIST_MODIFY.
* CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
* EXPORTING
* IT_LIST_COMMENTARY = HEADING5[]
* EXCEPTIONS
* OTHERS = 1.
*ENDFORM.
* FORM END_OF_PAGE *
form end_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = heading6[]
exceptions
others = 1.
endform.
* FORM END_OF_LIST *
form end_of_list.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = heading7[]
exceptions
others = 1.
endform.
* FORM TOP_OF_LIST *
form top_of_list.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = heading8[]
exceptions
others = 1.
endform.
*--- End of Program
Regards
Sudheer -
'Reuse_alv_grid_display' - how to enable save layout button
Hi,
am not getting the option 'save layout' button in my ALV. I have tried the following code.
s_layout-colwidth_optimize = c_on.
s_layout-zebra = c_on.
s_variant-report = sy-repid.
s_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = s_layout
it_fieldcat = t_fieldcat
is_variant = s_variant
is_save = 'A'
TABLES
t_outtab = rt_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
Please help.Dear Arvind,
If you are using "REUSE_ALV_GRID_DISPLAY" and not passing "I_CALLBACK_PROGRAM = SY-REPID", You will not be able to save layout.
So I request all to pass following parameters to save layout.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
I_SAVE = 'X'
IS_VARIANT = 'X'
TABLES
T_OUTTAB = IT_DATA
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
With Regards,
Tushar Trivedi. -
REUSE_ALV_GRID_DISPLAY print to spool without out
Hi everyone,
I use the MD REUSE_GRID_LIST_DISPLAY and I need to find the current spool number, in order to use the MD 'convert_ABAPSPOOLJOB_2_PDF'. The spool is created but I don' know how to access its content.
Does Module function exist ?
I use the following code :
l_print-print = ' '.
l_print-prnt_info = 'X'.
l_print-no_print_selinfos = 'X'.
l_print-no_print_listinfos = 'X'.
l_print-no_coverpage = 'X'.
l_print-reserve_lines = 1.
l_print-print_ctrl-pri_params = l_params.
sy-batch = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_grid_title = text-t01
it_fieldcat = lt_field_catalog
is_print = l_print
it_filter = lt_field_filter
TABLES
t_outtab = stat_paie
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thank very much.
PierreHi,
Please check out
How to find the spool number of a report's output?
this will be of help for you.
Maybe you are looking for
-
Hi guys, I have a .avi file in my recycle bin, but when I empty my recycle bin it always says "The operation can't be completed because the item "The Polar Express.avi" is in use. Well, it isn't in use and my Mac has been rebooted a number of times s
-
Help!! My iPod keeps resetting itself.
Hey guys, So when I leave my ipod in my deak for a day and take it out the next day to listen to it. It doesn't turn on conventionally...I get the apple logo on a black backdrop. Then it gets me to the menu. And also, when it was plugged into my Kens
-
I installed Arch on my MacBook (Core Duo) and it all seemed to work fine. I am dualbooting OS X so i have 4 partitions. After the install finished i ran gptsync from rEFIt and it didnt report anything, but when i went to boot, I got a black screen. S
-
Can we have mesageChoice Item as Lov Criteria
Hi Guys, Just wanted to know if it is possible to have a messageChoice items as the Lov Criteria. If not what is the alternative. My scenario is that i have a messageChoice which i want to use to narrow down the Lov search result. For example: messag
-
i have firefox 4 on my computer 9fujitsu simens laptop) system of computer is windows xp pro sp3. i watch lots of videos on u tube and similar applications. usually there is a feature on real player that allows me to download these videos to my compu