Exception is not showing in transformation step in BPM after activating

Hi ,
I want to cancel the process if any mapping error occur in transformation step for that I designed by below steps.
1.Block step ( mentioned exeption)
2. transformation step ( Inside block mentioned block step exception)
3. exception branc inside block
4. contorl step (Cancel process inside exception branch)
after activating the BPM , in transformation step exception is not showing .
How to resolve this issue how
Please help me
Regards

2. transformation step ( Inside block mentioned block step exception)
Did you define the Exception Handler properly and also used the same in the Exception Branch? If you do a check in IR for your BPM (F7) do you get any error/ warning messages?
Regards,
Abhishek.

Similar Messages

  • Expression must return the interface type in Transformation Step in BPM

    hi,
    We are getting below while activating the IP,
    Expression must return the interface type SI_Send_AA
    Expression must return the interface type SI_Get_AA
    No semantic errors found
    We have a Transformation Step in BPM,
    In OM, Source is SI_Send_AA and Target is SI_Get_AA
    Also Container variable points to  the same Abstract SI's.
    Few Thread's for Same are error are:
    Error in  BPM
    expression must return the interface type
    Transformation step in ccBPM scenario
    Error while compiling Business Process
    Even after checking these i am getting this Exception.
    Please Help!
    Thanks,
    Mayank

    Also Container variable points to the same Abstract SI's
    Are you sure that you are using Abstract Message Interfaces only and that these are referring to relevant container variables.
    Normally it happens that there is some mis-match between the message types/ interfaces that we use in the mapping and that we use in the BPM.
    If still not solved, then delete the Transformation step --> save --> activate......then again Edit the BPM to include the Transformation Step.
    Regards,
    Abhishek.

  • Multiple source messages in transformation step in bpm

    Hello,
    I am using a transformation step in bpm, I have two source messages and 1 target message, I got an error 'expression must return the interface type XXXX(in source message)', I checked my source message in interface mapping and the container element, the types do match.
    All the interfaces in the OM as well as in the bpm container definition are of type abstract.
    It seems to have something to do with the interfaces belonging to different software components?
    I declared a usage dependency from one swcv (holding the bpm) to another (holding the abstract interfaces which cause the error in the transformation step), so that I can reference them in the bpm.
    I thought it might have something to do on how  the message interfaces are selected in the operation mapping. so I tried to select the messages through the depencency path, but that was of no help either.
    Have I been clear?
    Any ideas?
    Thanks
    Matthias

    Since no receiver information is available in the transformation step, there can be no value mapping within the transformation  step. If the messages to be transformed give values in different formats, for example different date formats, you must first normalize the values before the messages can be processed in the process. To do so, define a message mapping with a corresponding value mapping.
    Check the help page below for reference
    http://help.sap.com/saphelp_nwpi71/helpdata/en/27/db283fd0ca8443e10000000a114084/content.htm

  • HT201401 My pictures are not showing up in my camera roll after I take them, where are they going?

    My photos are not showing up in my photo stream after I take them, what could be wrong? Brand new phone, camera is working, older photos from cloud are there but not new ones that I am taking.

    Reset the iPhone then take a photo. See if it shows up in the camra roll.
    If not, reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    Then try a photo.
    Message was edited by: CS

  • Make the emails do not show in the ipad or iPhone after i read them in my macbook air

    make the emails do not show in the ipad or iPhone after i read them in my macbook air

    Assuming you're using Apple's Mail on your Mac, go to your Mac's mail Preferences (from Mail on the menu bar).
    Click Accounts on top, then click your email account on the left.
    Then click Advanced on the top.
    Check "remove copy from server after retrieving a message" and set the line below it to "immediately".
    That will do it.

  • Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring

    Music on my phone does not show all the iTunes artwork, even after doing a backup restore, eliminating all music and restoring  I have an iphone5 64 syncing about 8000 songs, so updating all is a time consuming, and now maddening process. Never had a problem before iOS 8. Someone (hello Apple) needs to develop a utility to help manage artwork recovery.

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • Field is not showing at transformations

    hi
    i replicated datasource with enhanced field , when i am making transformations its not available at transformations level, i ma creating new transformations?
    any reason?

    go first i source system transaction rsa6 look gor your enriched datasource and clic on the pencil to modify it there you will see unhide flag for your fields that are marked so unmark them and follow as you have done so far replication ...
    regards
    Boujema

  • Some Site Collection not showing up (even the system pages) after upgrade

    Hi All -
    Following http://technet.microsoft.com/en-us/library/cc263299.aspx I just did database upgrade from 2010 to 2013. Some of the site collections are not showing up. These are basic site collection with almost no custom code. Just bunch of list and libraries.
    Not even the system pages such as web part gallery, masterpage setting page none are opening. I check the Correlation ID  and the log file is showing the below error
    Name=Request (GET:http://<siteurl>/_Layouts/ChangeSiteMasterPage.aspx) 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.80 w3wp.exe (0x1858) 0x198C SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True,
    UserIdentityName=, ClaimsCount=0 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.81 w3wp.exe (0x1858) 0x198C SharePoint Foundation Logging Correlation Data xmnv Medium Site=/sites/WK-Advisors 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83
    w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite,
    Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
    databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr,
    SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String
    bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
    pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
    pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
    UInt64& ppermMask, ... 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies,
    String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl,
    Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String&
    pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... 5bb6669c-24a6-70d4-9fcd-23851c953ba2
    01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte&
    piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
    bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
    pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint
    Foundation Files 00000 High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid&
    pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies,
    String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden,
    Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation
    Files 00000 High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object&
    oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest,
    String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl,
    String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... 5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High ...String&
    siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path,
    Boolean throwIfFileNotFound) at Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String virtualPath) at System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate) at
    System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate) at System.Web.Compilation.BuildManager.GetVPathBuildResultWithN...
    5bb6669c-24a6-70d4-9fcd-23851c953ba2 01/03/2014 11:48:56.83* w3wp.exe (0x1858) 0x198C SharePoint Foundation Files 00000 High ...oAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean</siteurl>
    According to this article, I need to verify whether sites are working in 2010 mode. Next step is to change the authentication. Should I proceed to change the authentication mode before resolving this issue?
    <siteurl></siteurl>
    <siteurl>Regards,</siteurl>
    <siteurl>Khushi
    </siteurl>
    <siteurl></siteurl>
    Khushi

    Hi
    Khushi ,
    Yes , you need to proceed to change the authentication mode . According to your error message “Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0” and “UserAgent not available, file
    operations may not be optimized”, all of them can be caused by the authenticate. So make sure you have upgraded cleanly and effectively to Claims Based Authentication.
    For more detail information, you can refer to the article:
    Migrate from classic-mode to claims-based authentication in SharePoint 2013
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Sync Send step after transformation step in BPM

    Hi Gurus,
    I have an interface where I am loading the data into an Oracle database and getting the response back (insertcount) from the database. Based on the response, I have to execute a stored procedure in another sync send step.
    I am doing perfectly alright until the transformation step. The sync send step after this step has the following entries.
    Sync interface: MI_LG_SP_INPUT_ABS
    Request Message: sp_lg_rec
    Response Message: sp_lg_snd
    While doing 'check(F7)', I am getting the following error.
    <b>Interface MI_LG_SP_INPUT_ABS for element sp_lg_poc_step2 is not abstract/asynchronous</b>
    The request message for this sync send step is the target message of the transformation step.
    This error is bugging me since 2 days. Please help me with this.
    Thanks
    Kalyan

    Sravya,
    I know what I did now. For my send sync interface which is MI_LG_SP_INPUT_ABS, I have unnecessarily created a container element and which caused this problem. From your post, I rechecked it and found that I don't need a container element for my abs/sync interface as I already have container elements for request and response which are abs/asynch.
    I gave you full points, thinking that you will come for my rescue in the future (just kidding!!!).
    Thanks again,
    Kalyan

  • Paid apps do not show up on my iphone 3 after restore

    after i restored my iphone 3g the paid apps don't show up on the screen
    however, itunes and the app store say that they are downloaded
    also, in the iphone setting it shows settings for beejive and facebook
    they just seem to not show up, as if minimized:S

    Restore them from the app store. When you do this it will tell you that you have already purchased this app and do you want to reinstall it. Just say yes.

  • Music not showing up in my Music Library after moving to another drive

    My C: drive was full, so I moved the file to my F: drive (have done this before, but somehow it only copied it and reverted to the old location on C).
    I found multiple iTunes folders throughout my many drives and got rid of all but the ones on the F: drive. It now shows multiple folders with all my songs on F: drive. However, they do not show up in my Music Library. I've tried the preferences \advanced \general \copy music to library trick and still nothing. Don't think I lost the music since I have all these folders (1 for each artist) and it looks like a lot of bytes.
    Please help..
    Alternatively, I'd like to know how to get the whole library on my laptop and off of this old computer that ran out of space. The F: drive is detachable.
    Thank you in advance

    Do you use iTunes Match?  Others have complained that it can take some time (overnight?) for items to appear in their library because of Match activities.
    Can you play a file with Quicktime Player?  Is it complete?
    Delete an item from the library but not the actual file.  Add the file again.

  • Why is my iPhone 4S dead, not showing in iTunes, won't charge after upgrading to 5.1.1???????!!!!!!!??

    After upgrading my iphone 4S to 5.1.1 I had a problem... woke up one morning and my phone was DEAD!  It was completely non responsive, not showing up in iTunes, not charging from my Mophie, or A/C or Mac.
    I wanted to post the fix that worked for me in case anyone else out there is having the same heart pulpitations I was this morning.  In the online communities Parisilia had posted a fix to do a hard reset  (Hold down the home button and power button simultaneously for several seconds, the phone will reboot and will then be recognized in iTunes and you can restore from backup).  This worked for me - PHEW!! Off the ledge...
    Once my phone rebooted it didn't actually need a restore because it hadn't 'reset' - everything was as it was the night before, although the battery had gone from 51% to 41%  Personally I'm shocked that it would drain 10% in one night and who knows how long it was 'dead' for after I put it to bed at 11:45pm????!!
    This is my second iPhone 4S since Oct 2011 - the first one had to be replaced because of something radically wrong with the battery capability.  After several very frustrating months of trying various fixes Apple finally took the phone back thinking it musta been a dud.  I've had this one for about 3 months and it's been much better battery-wise, but now the mysterious DOA event has me seriously worried that I have another dud.  Looking thru the communities there seem to be many more people experiencing the same issue, so hopefully it's software and can be fixed (APPLE ARE YOU LISTENING??) rather than me being up the creek again.
    Good luck to anyone else experiencing the same issue.

    Try
    1. Totally remove iTunes and QuickTime
    see
    http://support.apple.com/kb/HT1926
    2. then you will need to do a "deep clean" of registry
    by this I mean a registry search for itunes and delete any and every key you find
    *however if you do not know how to do this safely don't try it*
    unfortunately the registry cleaners do not clean to this level
    and itunes leaves considerable detritus in the registry which can screw up updates and or reinstalls
    Apple needs a cleaner similar to Norton's effort which has similar problems. Their tool removes ALL evidence of a previous anti virus installation which is what the above solution achieves in iTunes

  • Shared tab in left menu column does not show on one of the computers after setting up Home Sharing

    For iTunes 10.3, I have set up home sharing on two computers that run windows 7, I have authorized both computers.  The iTunes Shared link for computer 2 shows up on left column for computer 1(main iTunes computer).  The problem I am having is that the Shared link for computer 1 DOES NOT show up on computer 2.   My network between the both computers is working because I am able to pull/copy music files from computer 1 to computer 2.  Why doesn't the Shared link for Computer 1 show up on Computer 2 Itunes left column?  Any help would be most appreciated. Thank you.

    Nothing had changed when I plugged in my iPod at work today, having changed it to manage manually earlier at home. But after rebooting a few minutes ago, iTunes cranked up and updated the library. The library now appears below DEVICES/iPod on the menu instead of under LIBRARY/Music at the top left, which I'm pretty sure is different from before, but no matter. Also the iPod is still not appearing in My Computer but again, no matter. I am able to play my tunes on the work install of iTunes now and use iDump (which is a helluva lot less trouble than iTunes) to extract them.
    Thanks again for all the help.
    HP Pavilion, Dell Optiplex Windows XP

  • Error in Transformation step of BPM

    Hi all,
    In BPM, I have defined a transformation step. For this, I have specified the Interface mapping which is between 2 abstract asynchronous interfaces. The Message Mapping for this Interface mapping involves multi-mapping (1:n) of the messages used.
    Also, for naming convenience, I have kept the names of the abstract async interface and its message type same.
    I have created containers for the message types of the both interfaces. The container for target message is of type 'multi-line'.
    When I checked the integration process, errors (red boxes) appear for both - the source and target messages in the transformation step properties window. The error text says <b>"Expression must return the interface type < Name of abstract message interface >"</b>
    What could be the cause of this error ?
    Any help would be appreciated.
    Thanks in advance.
    -Shankar

    Hi Shankar,
    Are you splitting the messages i.e 1 message into N messages ? If so, do  you have multiple message types in the Message Mapping in the target side ?
    Anyway, just recheck the Abstract Interfaces are activated. And reassign the container variables with Source message Absract Interfaces and Target message Abstract Interfaces.
    The error tells that, there is somewhere occurence problem.. So that is mismatch with the Message Interfaces..because you have selected the Multiline in the COntainers right ? Check without that..if it is ok, to narrow down the debugging..
    Regards,
    moorthy
    Regards,
    Moorthy

  • Lightroom CC not showing up in my creative cloud after repeated log out and log in's

    tried updating to the latest lightroom, but creative cloud not showing Lightroom CC even after repeated log outs and log back in's. Showed up first time on another machine of mine but not my main desktop machine.

    Hi Sandeep,
    I just signed up for a 30 day trial and I'm really excited to use the software for movie editing, however I just saw this post after I was trying to use Premiere Pro and sadly I don't have a machine with 64 Bit OS. I was just seeing if there is any way I can cancel my free trial and then start it back up after I get a new computer. I'm really excited about using Premier Pro but want to make sure I can try it out with a film project before purchasing and I don't know how long it will take to get a new computer.
    thanks!

Maybe you are looking for